Whirlpool IHE37301 Le manuel du propriétaire

Catégorie
Cuisinières
Taper
Le manuel du propriétaire
#
ELECTRICRANGES
CUISINIERES
ELECTRIQUES
o__-_7_ _ ,_ ,_ _ _ _
Table of Contents/Table des matieres ............. 2
9754176A
TABLEOFCONTENTS
RANGE SAFETY ......................................................................... 3
The Anti-Tip Bracket .................................................................... 3
PARTS ANB FEATURES ............................................................ 6
COOKTOP USE ........................................................................... 8
Cooktop Controls ......................................................................... 8
Coil Element Cooktop Models ..................................................... 9
Ceramic Glass Cooktop Models .................................................. 9
Home Canning ............................................................................. 9
Cookware ..................................................................................... 9
Display .......................................................................................... 9
Clock .......................................................................................... 10
Using the Minute Timer .............................................................. 10
Oven Temperature Control ........................................................ 10
BEFORE USING ........................................................................ 10
Aluminum Foil............................................................................. 10
Positioning Racks and Bakeware .............................................. 10
Bakeware .................................................................................... 11
Convection Roasting Rack ........................................................ 11
Oven Vents ................................................................................. 11
OVEN USE................................................................................. 12
Oven Control Functions ............................................................. 12
Bake ............................................................................................ 12
Auto Baking ................................................................................ 13
Delay Start .................................................................................. 13
Broil ............................................................................................ 14
Convection ................................................................................. 14
Convection Cooking ................................................................... 15
Convection Bake ........................................................................ 15
Convection Broil ......................................................................... 16
RANGE CARE ........................................................................... 16
Self-Cleaning Cycle .................................................................... 16
General Cleaning ........................................................................ 17
Control Panel Glass ................................................................... 19
Cooktop Light Replacement ...................................................... 19
Oven Light .................................................................................. 19
Appliance Outlets ....................................................................... 20
Oven Door .................................................................................. 20
Storage Drawer .......................................................................... 20
Sweep-Thru Base ...................................................................... 20
TROUBLESHOOTING ............................................................... 21
TABLEDESMATIERES
SI_CURITI_ DE LA CUISINII_RE ................................................ 23
La bride antibasculement ........................................................... 23
pII-CES ET CARACTr::RISTIQUES ........................................... 26
UTILISATION DE LA TABLE DE CUISSON ............................. 28
Commandes de la table de cuisson .......................................... 28
Modeles de table de cuisson avec elements en spirale ............ 29
Modeles de table de cuisson en vitroceramique ....................... 29
Preparation de conserves h la maison ....................................... 29
Ustensiles de cuisson ................................................................ 29
Affichage ..................................................................................... 30
Horloge ....................................................................................... 30
Minuterie ..................................................................................... 30
Commande de temperature du four .......................................... 30
AVANT L'UTILISATION ............................................................. 31
Papier d'aluminium ..................................................................... 31
Positionnement des grilles et des ustensiles de cuisson .......... 31
Ustensiles de cuisson ................................................................ 31
Grille de r6tissage par convection ............................................. 32
Events du four ............................................................................ 32
UTILISATION DU FOUR ........................................................... 33
Commandes du four .................................................................. 33
Cuisson au four .......................................................................... 33
Autocuisson au four ................................................................... 34
Mise en marche differee ............................................................. 34
Cuisson au gril ............................................................................ 35
Convection ................................................................................. 36
Cuisson par convection ............................................................. 36
Cuisson au four par convection ................................................. 36
Cuisson au gril par convection ................................................... 37
ENTRETIEN DE LA CUISINII-RE .............................................. 38
Programme d'autonettoyage ..................................................... 38
Nettoyage gen6ral ...................................................................... 39
Vitre du tableau de commande .................................................. 41
Remplacement de la lampe de la table de cuisson ................... 41
Lampe du four ............................................................................ 41
Prises pour appareils menagers ................................................ 42
Porte du four ............................................................................... 42
Tiroir de remisage ....................................................................... 42
Base balayable ........................................................................... 42
BI_PANNAGE ............................................................................. 43
RANGESA£EI
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
The rangewill not tip during normal use. However, the range can tip if you applytoo much force or weight to the open door
without the anti-tip bracket fastened down properly.
Anti-Tip Bracket
Range Foot
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
See the installation instructions for details.
Failure to follow these instructions can result in death or serious burns to children
and adults.
Making sure the anti-tip bracket is installed:
Slide range forward.
Look for the anti-tip bracket securely attached to floor.
Slide range back so rear range foot is under anti-tip bracket.
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: To reduce the risk of fire, electrical
shock, injuryto persons, or damage when using the
range, follow basic precautions, including the
following:
[] WARNING: TO REDUCE THE RISK OF
TIPPING OF THE RANGE, THE RANGE MUST BE
SECURED BY PROPERLY INSTALLED ANTI-TIP
DEVICES. TO CHECK IF THE DEVICES ARE
INSTALLED PROPERLY, SLIDE RANGE FORWARD,
LOOK FOR ANTI-TIP BRACKET SECURELY
ATTACHED TO FLOOR, AND SLIDE RANGE BACK
SO REAR RANGE FOOT IS UNDER ANTI-TIP
BRACKET.
[] CAUTION: Do not store items of interest to
children in cabinets above a range or on the back-
guard of a range - children climbing on the range to
reach items could be seriously injured.
[] Proper Installation - Be sure the range is properly
installed and grounded by a qualified technician.
[] Never Use the Range for Warming or Heating the
Room.
[] Do Not Leave Children Alone - Children should not
be left alone or unattended in area where the range
is in use. They should never be allowed to sit or
stand on any part of the range.
[] Wear Proper Apparel - Loose-fitting or hanging
garments should never be worn while using the
range.
[] User Servicing - Do not repair or replace any part of
the range unless specifically recommended in the
manual. All other servicing should be referred to a
qualified technician.
[] Storage in or on the Range - Flammable materials
should not be stored in an oven or near surface
units.
[] Do Not Use Water on Grease Fires - Smother fire or
flame or use dry chemical or foam-type extinguisher.
[] Use Only Dry Potholders - Moist or damp
potholders on hot surfaces may result in burns from
steam. Do not let potholder touch hot heating
elements. Do not use a towel or other bulky cloth.
[] DO NOT TOUCH SURFACE UNITS OR AREAS
NEAR UNITS - Surface units may be hot even
though they are dark in color. Areas near surface
units may become hot enough to cause burns.
During and after use, do not touch, or let clothing or
other flammable materials contact surface units or
areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and
surfaces facing the cooktop.
[] Use Proper Pan Size - The range is equipped with
one or more surface units of different size. Select
utensils having flat bottoms large enough to cover
the surface unit heating element. The use of under-
sized utensils will expose a portion of the heating
element to direct contact and may result in ignition
of clothing. Proper relationship of utensil to burner
will also improve efficiency.
[] Never Leave Surface Units Unattended at High Heat
Settings - Boilover causes smoking and greasy
spillovers that may ignite.
[] Make Sure Reflector Pans or Drip Bowls Are in
Place - Absence of these pans or bowls during
cooking may subject wiring or components under-
neath to damage.
[] Protective Liners - Do not use aluminum foil to line
surface unit drip bowls or oven bottoms, except as
suggested in the manual. Improper installation of
these liners may result in a risk of electric shock, or
fire.
[] Glazed Cooking Utensils - Only certain types of
glass, glass/ceramic, ceramic, earthenware, or other
glazed utensils are suitable for range-top service
without breaking due to the sudden change in
temperature.
[] Utensil Handles Should Be Turned Inward and Not
Extend Over Adjacent Surface Units - To reduce the
risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil,
the handle of a utensil should be positioned so that
it is turned inward, and does not extend over
adjacent surface units.
[] Do Not Soak Removable Heating Elements -
Heating elements should never be immersed in
water.
[] Do Not Cook on Broken Cooktop - If cooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of
electric shock. Contact a qualified technician
immediately.
[] Clean Cooktop With Caution - If a wet sponge or
cloth is used to wipe spills on a hot cooking area,
be careful to avoid steam burn. Some cleaners can
produce noxious fumes if applied to a hot surface.
[] Use Care When Opening Door - Let hot air or
steam escape before removing or replacing food.
[] Do Not Heat Unopened Food Containers - Build-up
of pressure may cause container to burst and result
in injury.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks - Always place oven
racks in desired location while oven is cool. If rack
must be moved while oven is hot, do not let
potholder contact hot heating element in oven.
DO NOT TOUCH HEATING ELEMENTS OR
INTERIOR SURFACES OF OVEN - Heating
elements may be hot even though they are dark in
color. Interior surfaces of an oven become hot
enough to cause burns. During and after use, do
not touch, or let clothing or other flammable
materials contact heating elements or interior
surfaces of oven until they have had sufficient time
to cool. Other surfaces of the appliance may
become hot enough to cause burns - among these
surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven
doors.
For self-cleaning ranges -
Do Not Clean Door Gasket - The door gasket is
essential for a good seal. Care should be taken not
to rub, damage, or move the gasket.
Do Not Use Oven Cleaners - No commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven - Remove broiler pan
and other utensils.
For units with ventilating hood -
Clean Ventilating Hoods Frequently - Grease should
not be allowed to accumulate on hood or filter.
When flaming foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
PARTSANDFEATURES
This manual covers several different models. The range you have purchased may have some or all of the parts and features listed. The
location and appearance of the features shown here may not match your model.
Control Panel
Easy Clean Ovens
2
eo O_F/AaRe*
oo
0 .H;
OFFIAR_ET
.a
4 _ , 6
3
@ @
Era,s,,
1. Left Front Control Knob
2. Left Rear Control Knob
3. Electronic Display
4. Up/Down buttons 7• Right Rear Control Knob
5• OVEN Indicator Light 8• Right Front Control Knob
6. Oven Temperature Control Knob
Self-Cleaning Non-Convection
2 3
BT'2 ,,,¢,Y,
cusser,
v
OFFi
"c 45o j
/
o
O0 1_9
OQ 2 a
5
8 9
f. Left Front Control Knob
2. Left Rear Control Knob
3. OVEN Indicator Lights
Self-Cleaning Convection
1 2
4• Oven Function Selector Knob
5• Electronic Display
6. Up/Down buttons
7• Oven Temperature Control Knob
8• Right Rear Control Knob
9• Right Front Control Knob
5 6
@@
c_lss_
7
J
f. Left Front Control Knob
2. Left Rear Control Knob
3. OVEN Indicator Lights
4. Oven Function Selector Knob
5. Electronic Display
6. Up/Down buttons
7• Oven Temperature Control Knob
8• Right Rear Control Knob
9. Right Front Control Knob
Range
3
4
\
//
I/
6
7
8
9
10
1. Surface Cooking Area
2. Anti-tip Bracket
3. Model and Serial Number Plate
(behind left side of
storage drawer)
4. Removable Storage Drawer
5. Control Panel
6. Hot Surface Indicator Light (ceramic
glass models only)
7. Automatic Oven Light Switch (on
some models)
8. Door Gasket
9. Broil Element
10. Bake Element
11. Self-Clean Latch (on some models
Other Parts and Features
(not shown above/optional on some
models)
Oven Door Window
Additional Oven Rack
Fluorescent cooktop light
Oven light
Coil element
Broiler pan support
Roasting rack
Appliance outlets
COOKTOPUSE
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
HOT Surface Indicator Lights
Single HOT surface indicator light (on some models)
Four HOT surface indicator lights (on other models)
The HOT surface indicator lights on the cooktop surface will glow
when their corresponding surface elements are turned on. The
HOT surface indicator lights will continue to glow as long as the
elements are too hot to touch, even after they are turned off.
NOTE: Heat from the oven vent may cause the left rear HOT
surface indicator light to glow to show that the area is too warm
to touch.
Simmer Element
(on some models)
The simmer element is identified on the disc in the center of the
element. This element can maintain lower temperatures for
preparation of foods that require very low heat like sauces,
chocolate or cheese.
Power On Lights
The Power On lights beside the control knobs indicate which
surface elements are turned on. A Power On light will glow when
its corresponding surface element is turned on.
Control Knob Settings
Control knobs must be pushed in before turning them to a
setting. The controls can be set anywhere between HI and "0"
(OFF). On models with Ceramic Glass, the controls work on the
principle of percent on, percent off. When the control is turned to
setting 5, the element will be on 50% of the time. Radiant heat
elements heat-up quickly. You will notice, and perhaps even hear,
the element switching on and off. Use the following chart as a
guide when setting heat levels.
SETTING RECOMMENDED USE
HI To start foods cooking.
To bring liquids to a boil.
8-6 To hold a rapid boil.
To quickly brown or sear meat.
5 Tocook gravy, pudding and sauce.
Tofry poultry or meat.
To maintain a slow boil.
4-2 To stew or steam food.
To simmer food.
1 To keep foods warm.
To melt chocolate.
Simmer Element Precise simmer control.
(on some models)
REMEMBER: When range is in use or (on some
models) during the Self-Cleaning cycle, the entire
cooktop area may become hot.
Drip bowls should be used at all times. Do not use aluminum
foil to cover drip bowls. Use of aluminum foil could result in
improper cooking, or damage to the element.
Prolonged use of elements without pots can cause damage
and early failure.
Use of round bottom woks is not recommended.
The temperature of the cooktop surface increases with the
number of elements that are on. With 3 or 4 elements turned
on, surface temperatures are high.
See the "General Cleaning" section, for care and cleaning
instructions.
......................<:: _] "I_ (iI_ISS'I.. _/O(kl,iOlO"= = !_l}(]l@,ii'[_'_
Quick light radiant heating elements:
The quick light radiant heating elements are designed for fast
heat response. You can see them light up in just seconds.
These elements consist of a set of special heater coils embedded
in a thermal insulation material. You may notice the element going
on and off a number of times during use. This is a normal
occurrence.
To maximize the efficiency of this type of heater coil, we suggest
you use it similarly to your previous element type. Turn to
maximum until the desired temperature is reached, then turn it
down to the setting that best maintains the desired heat.
See the "General Cleaning" section, for care and cleaning
suggestions. Do not use the range if the cooktop is cracked or
broken.
When canning for long periods, alternate the use of surface
cooking areas, elements or surface burners between batches.
This allows time for the most recently used areas to cool.
Center the canner on the grate or largest surface cooking
area or element. Canners should not extend more than 1 in.
(2.5 cm) outside the cooking area.
Do not place canner on two surface cooking areas, elements
or surface burners at the same time.
On ceramic glass models, only use flat-bottomed canners.
On coil element models, the installation of a Canning Unit Kit
is recommended. If not installed, the life of the coil element
will be shortened.
For more information, contact your local agricultural
department. Companies that manufacture home canning
products can also offer assistance.
IMPORTANT: Never leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides, a well-
fitting lid and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base it can leave permanent marks on the cooktop or grates.
Cookware material is afactor in how quickly and evenly heat is
transferred, which affects cooking results. A non-stick finish has
the same characteristics as its base material. For example,
aluminum cookware with a non-stick finish will take on the
properties of aluminum.
Use the following chart as a guide for cookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum Heats quickly and evenly.
Cast iron
Ceramic or
Ceramic glass
Copper
Earthenware
Porcelain
enamel-on-steel
or cast iron
Suitable for all types of cooking.
Medium or heavy thickness is best for
most cooking tasks.
Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Follow manufacturer's instructions.
Heats slowly, but unevenly.
Ideal results on low to medium heat
settings.
Heats very quickly and evenly.
Follow manufacturer's instructions.
Use on low heat settings.
See stainless steel or cast iron.
Stainless steel Heats quickly, but unevenly.
A core or base of aluminum or copper
on stainless steel provides even
heating.
When the range is first plugged in, or after a power interruption,
the display will flash "12:00" until the CLOCK pad (button) is
pressed.
When the oven is in use, the display shows preheat time and the
temperature and oven setting.
When the oven is not in use, the display shows the time of day.
When using the TIMER, for settings of 1-59 minutes, the display
will count down in seconds. For settings I hour or over, the
display will count down hours and minutes.
When using COOK TIME, the display will show hours and
minutes.
Setting the Clock
1. Press the CLOCK pad (button).
2. Press the up or down pad (button) until the correct time
shows on the display.
3. Each tap of the up or down pad(s) or button(s) will change the
displayed time by 1 minute. If a button is held, the displayed
time will change in 10 minute increments. The Set Clock
mode automatically exits to the clock display mode 60
seconds after the last data change.
NOTE: When the range is first plugged in, or after a power
interruption, the display will flash "12:00" until the CLOCK
pad (button) is pressed.
The minute timer does not start or stop the oven. It works like a
regular minute timer independent of the oven to time anything
you like. The minute timer can be set in increments of 1 minute
up to 12 hours.
To use the Minute Timer:
1. Press the TIMER pad (button),
2. Press the up or down pad (button) to set the TIMER. The
timer will automatically start 5 seconds after the time is
entered, The "TIMER Indicator" will be lit to indicate that the
minute timer is being displayed. When time remaining is less
than one minute, 1 beep will sound and the display will count
down the seconds remaining.
To return to time of day:
1. Press the CLOCK pad (button) to return to the time of day.
The time will be displayed for 5 seconds and then return to
the timer display.
2. At the end of the timer cycle, 4 beeps will sound and "End"
will be displayed until a pad (button) is pressed.
To cancel Minute Timer:
Press TIMER twice or press and hold the down pad (button) until
0:00 is reached, The time of day display will return in 5 seconds.
tl 6" 1
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door and element or
burner cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted, It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. No sign means the oven will be warmer by the displayed
amount. Use the following chart as a guide.
ADJUSTMENT °F COOKS FOOD
(ADJUSTMENT °C)
5° to 10°F (3° to 6°C) .,.a little more
15° to 20°F (9° to 12°C) ...moderately more
25 °to 35°F (15° to 21°C) ...much more
-5 ° to -10°F (-3° to -6°C) ...a little less
-15 ° to -20°F (-9° to -12°C) ...moderately less
-25 ° to -35°F (-15 ° to -21 °C) ...much less
BEFOREUSING
Odors are normal when the range is new. This happens the first
time the oven is used.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off, Exposure to the fumes may result in death to
certain birds, Always move birds to another closed and well
ventilated room.
IMPORTANT: Do not line the oven bottom with any type of foil,
liners or cookware because permanent damage will occur to the
oven bottom finish.
Do not cover entire rack with foil because air must be able to
move freely for best cooking results.
To catch spills, place foil on rack below dish. Make sure foil is
at least 1 in. (2.5 cm) larger than the dish and that it is turned
up at the edges.
Do not cover food with aluminum foil when convection
cooking (on some models).
IMPORTANT: Never place food or bakeware directly on the oven
door or bottom. Permanent damage will occur to the porcelain
finish.
RACKS
Position racks before turning the oven on. Do not move racks
with bakeware on them, Make sure racks are level. To move a
rack, pull it out to the stop position, raise the front edge, then lift
out. Use the following illustration and chart as a guide.
/
FOOD RACK POSITION
Frozen pies, large roasts, turkeys, 1 or 2
angel food cakes
Bundt cakes, most quick breads, 2
yeast breads, casseroles, meats
Cookies, biscuits, muffins, cakes, 2 or 3
non-frozen pies
10
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow 2 in.
(5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
NUMBEROF POSITION ON RACK
PAN(S)
1 Center of rack.
2 Side by side or slightly staggered.
3 or 4 Opposite corners on each rack. Make sure
that no bakeware piece is directly over
another.
The convection roasting rack is a specially designed rack, ideal
for use when roasting and broiling meats using any of the
convection cooking functions. Place it in the broiler pan instead
of the regular grid. It raises the meat for better airflow to all sides
for more even roasting and broiling.
The bakeware material affects cooking results. Follow
manufacturer's recommendations and use the bakeware size
recommended in the recipe. Use the following chart as a guide.
BAKEWARE/ RECOMMENDATIONS
RESULTS
Light colored Use temperature and time
aluminum recommended in recipe.
Light golden
crusts
Even browning
Dark aluminum
and other
bakeware with
dark, dull and/or
non-stick finish
Brown, crisp
crusts
May need to reduce baking
temperatures 25°F (15°C).
Use suggested baking time.
For pies, breads and casseroles, use
temperature recommended in
recipe.
Place rack in center of oven.
Insulated cookie
sheets or baking
pans
Little or no
bottom
browning
Place in the bottom third of oven.
May need to increase baking time.
Stainless steel
Light, golden
crusts
Uneven
browning
May need to increase baking time.
Stoneware Follow manufacturer's instructions.
Crisp crusts
Ovenproof
glassware,
ceramic glass or
ceramic
Brown, crisp
crusts
May need to reduce baking
temperatures 25°F (15°C).
1. Oven vent coil element cooktop models
1. Oven door vent
1. Oven vent free-standing ranges
OvenVent
1. Oven vent slide-in ranges
The oven vents should not be blocked or covered since they
allow the release of hot air and moisture from the oven. Doing so
will cause poor air circulation, affecting cooking and cleaning
results. Never set plastics, paper or other items that could melt or
burn near the oven vents. Some condensation may occur,
however this will not affect cooking performance.
11
OVENUSE
The OVEN indicator light cycles on/off as the oven cycles on/off
to maintain a set temperature.
The oven temperature control provides infinite heat settings for
oven cooking temperature. The numbers on the dial serve as a
reference. The control can be turned to any setting to provide the
exact heat required.
Self-Cleaning Non-Convection Oven
The oven function control is used to select oven functions:
BAKE Preheating
Baking
BROIL Broiling
Vari-Broil
AUTO Timed Cooking
Delay Cooking
CLEAN Self-cleaning
The OVEN indicator light cycles on/off as the oven cycles in order
to maintain a set temperature.
The CLEAN indicator light is on during the Self-cleaning cycle to
indicate that the oven door is locked and the Self-cleaning cycle
is operating.
The oven temperature control provides infinite heat settings for
oven cooking temperature, and is also used to enable the Self-
cleaning cycle.
The numbers on the dial serve as a reference.The control can be
turned to any setting to provide the exact heat required.
Self-Cleaning Convection Oven
The oven function control is used to select oven functions:
BAKE Preheating
Baking
BROIL Broiling
Vari-Broil
AUTO Timed Cooking
Delay Cooking
CLEAN Self-cleaning
CONVEC Baking with the Convection Element
CONVEC BROIL Broiling with the Convection Fan
CONVEC BAKE Baking with the Convection Fan
The OVEN indicator light cycles on/off as the oven cycles on/off
to maintain a set temperature
The CLEAN indicator light is on during the Self-cleaning cycle to
indicate that the oven door is locked and the Self-cleaning cycle
is operating.
The oven temperature control provides infinite heat settings for
oven cooking temperature. The numbers on the dial serve as a
reference. The control can be turned to any setting to provide the
exact heat required.
The bottom element operates at full power when pre-heating.
During baking, the bottom element cycles on and off to maintain
the set temperature.
Use this setting for baking, roasting and heating casseroles.
To Set Bake:
1. Turn the oven function selector knob to BAKE. This step does
not apply for Easy Clean models.
2. Turn the oven temperature control knob to the desired
cooking temperature.
3. The oven is ready for baking when the OVEN indicator light
turns off, indicating that the oven has preheated to the set
temperature. Food should not be placed in the oven until
preheat is complete.
4. When cooking is complete, turn the oven function selector
and oven temperature control knobs to the OFF position.
12
Food Poisoning Hazard
Do not let food sit in oven more than one hour
before or after cooking.
Doing so can result in food poisoning or
sickness.
The electronic oven control can be set to turn the oven on and off
at times you set. Maximum time that can be programmed for
each setting is 11 hours, 59 minutes. Before using AUTO BAKE,
make sure the clock is set to the correct time of day.
To Start AUTO BAKE and stop automatically:
1. Press the COOK TIME button. The colon in the display will
flash and the "PROGRAMME indicator" light will come on.
2. To adjust the COOK TIME press the up or down pad (button)
to set the time ahead or back.
Once you stop pressing the up or down pad (button) for a
period of 5 seconds, the timer starts, the display shows time
remaining to cook, and the "PROGRAMME indicator"
remains on.
3.
4.
Turn the oven function selector knob to AUTO or AUTO
BAKE.
Turn the oven temperature control knob to the desired
cooking temperature.
When cooking starts, the display shows time remaining to
cook. The OVEN indicator light comes on when the oven is
heating.
5.
To return to time of day, press CLOCK and the time of day will
be displayed for 5 seconds, then the display will return to the
timer setting, displaying the time remaining.
To change the timer setting, press the up or down pad
(button) to set the time ahead or back.
6. When cooking is complete, the oven shuts off, 4 tones sound,
and "End" is displayed.
7. Turn the oven function selector and temperature control
knobs to the OFF position.
8. Press COOK TIME to return to the time of day display.
To cancel timed cooking:
1. Turn the oven function selector and temperature control
knobs to the OFF position.
2. Press COOK TIME twice to cancel the timer and return to
time of day display.
To change timer settings:
Press COOK TIME or START TIME followed by the up or down
pad (button) to change the setting.
Food Poisoning Hazard
Do not let food sit in oven more than one hour
before or after cooking.
Doing so can result in food poisoning or
sickness.
The oven can be set in advance to start and stop at selected
times. Do not use delay start cooking for foods requiring
preheating or under cooking may result.
To Set DELAY START and stop automatically:
1. Set COOK TIME.
2. Set START TIME.
3. Turn the oven function selector knob to AUTO or AUTO
BAKE.
4. Turn the oven temperature control knob to the desired
cooking temperature.
When cooking starts:
The display changes to show the time remaining to cook. The
OVEN indicator light comes on when the oven is heating.
When cooking is complete:
The oven shuts off, 4 tones sound, and "End" is displayed. Turn
the oven function selector and temperature control knobs to the
OFF position.
Press COOK TIME to return to time of day display.
To return to time of day:
Press CLOCK, the time of day will be displayed for 5 seconds,
then the display will return to the timer setting, displaying the
time remaining.
To change timer settings:
Press COOK TIME or START TIME followed by the up or down
button(s) to change the setting.
To cancel delayed cooking before cooking has started:
Turn the oven function selector and temperature control knobs to
the OFF position. Press COOK TIME three times, then press
START TIME three times to cancel the timer and return to time of
day display.
To cancel delayed cooking after cooking has started:
Turn the oven function selector and temperature control knobs to
the OFF position. Press COOK TIME twice to cancel the timer
and return to time of day display.
13
Use this setting for normal broiling and top browning with the
door open in the Broil Stop position.
Use only the broiler pan and grid provided with the appliance.
It is designed to drain juices and help prevent spatter and
smoke.
For proper draining, do not cover the grid with foil. The
bottom of the pan may be lined with aluminum foil for easier
cleaning.
Trim excess fat to reduce spattering. Slit the remaining fat on
the edges to prevent curling.
Pull out oven rack to stop position before turning or removing
food. Use tongs to turn food to avoid the loss of juices. Very
thin cuts of fish, poultry or meat may not need to be turned.
After broiling, remove the pan from the oven when removing
the food. Drippings will bake on the pan if left in the heated
oven, making cleaning more difficult.
This setting can also be used for Vari-Broil with the door closed.
The element will cycle off and on to maintain the preset
temperature.
To Broil:
1. Open the oven door to the "broil stop position" about 4 in. (10
cm).
2. Turn the oven function selector knob to BROIL (not applicable
on Easy Clean models).
3. Turn the oven temperature control knob to BROIL.
4. When cooking is complete, turn the oven function selector
and/or the oven temperature control knobs to the OFF
position. The top element operates at full power when
heating.
To Vari-Broil:
Vari-Broil allows you to broil foods at a temperature lower than
the conventional broiling temperature of 500°F/260°C with the
oven door closed.
When the selected temperature is reached, the broil element will
automatically cycle off and on to maintain the preset
temperature.
For Self-Cleaning and Convection Self-Cleaning models:
1. Close the oven door.
2. Turn the oven function selector knob to BROIL.
3. Turn the oven temperature control knob to the desired
broiling temperature.
4. The oven is ready for broiling when the OVEN indicator light
turns off, indicating that the oven has reached the set
temperature.
5. When cooking is complete, turn the oven temperature control
knob to the OFF position.
On Easy Clean models:
1. Turn the oven temperature control knob to BROIL, then turn
back to the desired broiling temperature.
2. The oven is ready for broiling when the OVEN indicator light
turns off, indicating that the oven has reached the set
temperature.
3. When cooking is complete, turn the oven temperature control
knob to the OFF position.
BROILING CHART
For best results, place food 3 in. (7 cm) or more from the broil
burner. Times are guidelines only and may need to be adjusted
for individual foods and tastes. Recommended rack positions are
numbered from the bottom (1) to the top (4). Do not use position
5. For diagram, see the "Positioning Racks and Bakeware"
section.
COOK
RACK TIME
FOOD POSITION minutes
SIDE 1 SIDE 2
Chicken
bone-in pieces 3 17-20 17-20
boneless breasts 4 11-16 11-16
Fish
Fillets 1/4-1/2in. 4 8-10 4-5
(.6-1.25 cm) thick
Steaks 3/4-1 in. 4 16-18 8-9
(2-2.5 cm) thick
Frankfurters 4 5-7 3-4
*Ground meat patties
3/4in. (2 cm) thick
well done 4 13-14 7-8
Ham slice, precooked
1/2in. (1.25 cm) thick 4 8-10 4-5
Lamb chops
1 in. (2.5 cm) thick 4 14-17 8-9
Pork chops
1 in. (2.5 cm) thick 4 20-22 10-11
Steak
1 in. (2.5 cm) thick
medium rare 4 14-15 7-8
medium 4 15-16 8-9
well done 4 18-19 9-10
* Place up to 12 patties, equally spaced, on broiler grid.
The rear element operates at full power whenever heating. Air in
the oven cavity is circulated by the fan for even heating. Use this
setting for baking breads, cakes and other foods which require
gentle heating. This setting is also recommended when baking
large quantities of food on more than one oven rack.
NOTE: During convection cooking, the oven door must remain
closed. The fan will operate only when the door is closed.
Proceed as follows to set a Convection temperature and
to preheat the oven to the set temperature:
1. Turn the oven function selector knob to CONVEC.
2. Turn the oven temperature control knob to the desired
cooking temperature.
3. The oven is ready for baking when the OVEN indicator light
turns off, indicating that the oven has preheated to the set
temperature.
4. When cooking is complete, turn the oven function selector
and oven temperature control knobs to the OFF position.
14
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air maintains a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
Most foods can be cooked by lowering cooking temperatures
25°F to 50°F (14°C to 28°C) and cooking time can be shortened
by as much as 30 percent, especially for large turkeys and roasts.
It is important not to cover foods so that surface areas remain
exposed to the circulating air, allowing browning and crisping.
Keep heat loss to a minimum by only opening the oven door
when necessary.
Choose cookie sheets without sides and roasting pans with
lower sides to allow air to move freely around the food.
Test baked goods for doneness a few minutes before the
minimum cooking time with an alternative method such as a
toothpick.
Use a meat thermometer or the temperature probe to
determine the doneness of meats and poultry. Check the
temperature of pork and poultry in two or three places.
The bottom element operates at full power whenever heating. Air
in the oven cavity is pulled into the center of the fan and pushed
out around the baffle for even heating and faster cooking.
Use this setting for single rack roasting and baking.
During convection cooking, the oven door must remain closed.
The convection fan will operate only when the door is closed.
To Convection Bake:
1. Turn the oven function selector knob to CONVEC BAKE.
2. Turn the oven temperature control knob to the desired
cooking temperature.
3. The oven is ready for baking when the OVEN indicator light
turns off, indicating that the oven has preheated to the set
temperature.
4. When cooking is complete, turn the oven function selector
and oven temperature control knobs to the OFF position.
Use the following chart below when convection roasting meats
and poultry.
CONVECTION ROASTING CHART
Food/Rack Cook Oven Temp. Internal
Position Time Food Temp.
(minutes)
Beef, Rack Position 2
Rib Roast
rare 20-25
medium 25-30 300°F (145°C)
well done 30-35
Rib Roast
(boneless)
rare 22-25
medium 27-30 300°F (145°C)
well done 32-35
Rump,
Sirloin Tip
Roast
rare 20-25
medium 25-30 300°F (145°C)
well done 30-35
Meatloaf 20-25 325°F (160°C)
140°F (60°C)
160°F (70°0)
170°F (75°0)
140°F (60°C)
160°F (70°0)
170°F (75°0)
140°F (60°0)
160°F (70°0)
170°F (75°0)
170°F (75°0)
Veal, Rack Position 2
Loin, Rib,
Rump
Roast
medium 25-35 325°F (160°C) 160°F (70°C)
well done 30-40 170°F (75°C)
Pork, Rack Position 2
Loin Roast 30-40 325°F (160°C) 170°F (75°C)
(boneless)
Shoulder 35-40 325°F (160°C) 170°F (75°C)
Roast
Ham, Rack Position 2
Fresh 25-35 300°F (145°C) 170°F (75°C)
(uncooked)
Fully 15-20 300°F (145°C) 170°F (75°C)
Cooked
Lamb, Rack Position 2
Leg,
Shoulder
Roast
medium 25-30 300°F (145°C) 160°F (70°C)
well done 30-35 170°F (75°C)
15
*Chicken, Rack Position 2
Whole
3-5 Ibs. 20-25 325°F (160°C) 185°F (85°C)
(1.5-2.2 kg)
5-7 Ibs. 15-20 325°F (160°C) 185°F (85°C)
(2.2-3.1 kg)
*Turkey, Rack Positions 1 or 2
13 Ibs. and 10-15 300°F (145°C) 185°F (85°C)
under
(5.85 kg)
Over 13 Ibs. 10-12 300°F (145°C) 185°F (85°C)
(5.85 kg)
*Cornish Game Hens, Rack Position 2 or 3
1-1.5 Ibs. 50-60 325°F (160°C) 185°F (85°C)
(0.5-0.7 kg)
*Do not stuff poultry when convection roasting.
RANGECARE
,4 _ "11 .... ...... ....
Burn Hazard
Do not touch the oven during the
Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result
in burns.
The top element operates at full power whenever heating. It will
cycle on and off to maintain the set temperature. Air in the oven
cavity is circulated by the fan for even heating.
Use this setting for broiling thicker cuts of meat, poultry and fish.
To Set Convection Broil:
1. Turn the oven function selector knob to CONVEC BROIL.
2. Turn the oven temperature control knob to BROIL or a lower
temperature for Vari-Broil.
3. The oven is ready for broiling when the OVEN indicator light
turns off, indicating that the oven has preheated to the set
temperature.
4. The circulating air creates a seal on all sides of the food so
that turning of foods is often not necessary.
5. When cooking is complete, turn the oven function selector
and oven temperature control knobs to the OFF position.
NOTES:
During convection broiling, the oven door must remain
closed. The fan will operate only when the door is closed.
Use the convection roasting rack and broiler pan for
convection broiling. Convection broiling is essentially
high-temperature convection cooking, combining fan-
circulated hot air with the direct heat of the broiler
element.
Do not cover the roasting rack with tin foil as this will
block air flow and extend cooking time.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to
the fumes may result in death to certain birds. Always move birds
to another closed and well ventilated room.
Self-clean the oven before it becomes heavily soiled. Heavy soil
results in longer cleaning and more smoke.
Keep the kitchen well-ventilated during the Self-Cleaning cycle to
help get rid of heat, odors, and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. See "Oven Vent(s)" section.
Do not clean, rub, damage or move the oven door gasket. The
door gasket is essential for a good seal.
Prepare Oven:
Remove the broiler pan, grid, cookware and bakeware and,
on some models, the temperature probe from the oven.
Remove any foil from the oven because it may burn or melt,
damaging the oven.
Remove oven racks to keep them shiny and easy to slide.
See "General Cleaning" section for more information.
Hand clean inside door edge and the 11/2in. (3.8 cm) area
around the inside oven cavity frame, being careful not to
move or bend the gasket. This area does not get hot enough
during self-cleaning to remove soil. Do not let water, cleaner,
etc. enter slots on door frame. Use a damp cloth to clean this
area.
Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
16
Prepare Cooktop and Storage Drawer:
Remove plastic items from the cooktop because they may
melt.
Remove all items from the storage drawer.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
The oven is preset for a 3 hour 30 minute clean cycle, however
the time can be changed. Suggested clean times are 2 hours 30
minutes for light soil and between 3 hours 30 minutes to 4 hours
30 minutes for average to heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth. Do not wipe down any of the inside surfaces until the oven
has completely cooled down. Applying a cool damp cloth to the
inner door glass before it has completely cooled could result in
the glass breaking.
The oven light will not work during the Self-Cleaning cycle.
To Self-Clean:
1. Close oven door completely.
2. On Self-cleaning models and Convection self-cleaning
models, turn the oven function selector knob to CLEAN. The
oven door will be locked automatically. The CLEAN indicator
light will turn on.
If the oven door is not closed completely, no indicator lights
will come on and the oven will not operate. Close the oven
door completely.
3. The display will show "3:00" and the "PROGRAMME
indicator" will come on indicating a 3 hour clean cycle. Press
up or down button(s) to decrease or increase the cleaning
time to between 21/2to 41/2hours.
4. The self-clean cycle will automatically start 5 seconds after
the last data change is made.
5. During the Self-cleaning cycle, the OVEN indicator light will
cycle on and off as the oven cycles on and off to maintain the
Self-cleaning temperature.
6. When Self-cleaning is over, "End" will be displayed. Press the
CLOCK button to return to the time of day display. Turn the
controls to the OFF position.
The CLEAN indicator light will remain on and the oven door
will remain locked until the oven cools.
To cancel the Self-cleaning cycle:
Turn the oven function selector knob to the OFF position at any
time during the Self-cleaning cycle. Press the CLOCK button to
cancel timer and return to time of day display. The oven door will
remain locked until the oven cools.
IMPORTANT: Before cleaning, make sure all controls are off and
the cooktop is cool. Always follow label instructions on cleaning
products. Soap, water and a soft cloth or sponge are suggested
first unless otherwise noted.
To help make periodic cleaning easier, do not allow basin(s) to fill
with grease.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.
Glass cleaner, mild liquid cleaner or non-abrasive scrubbing
pad:
Gently clean around the model and serial number plate
because scrubbing may remove numbers.
CONTROL KNOBS
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs.
When replacing knobs, make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
Soap and water or dishwasher:
Pull knobs straight away from control panel to remove.
COIL ELEMENT (on some models)
Your range is designed for ease of cleaning. Most cleaning can
be done with soap and water or other mild household cleaners.
Cleaning your range whenever spills or soiling occurs will keep it
looking and operating like new.
DO NOT use commercial oven cleaners on the exterior.
Coil element removal/replacement
The coil elements are self-cleaning. Any spillage will burn off.
However, removal of large pieces of food or excess oil is
recommended to prevent smoking.
DO NOT IMMERSE COIL ELEMENTS IN WATER.
NOTE: Drip bowls reflect heat back to cookware placed on the
coil elements. They also help catch spills. When they are kept
clean, they reflect heat better and look new longer.
Removing a coil element
Make sure all coil elements are turned off and cool before
removing coil elements and drip bowls.
Lift the edge of the element, opposite the receptacle, just
enough to clear the drip bowl.
Pull the element straight away from the receptacle.
Lift out the drip bowl.
Replacing a coil element
Make sure all coil elements are turned off before replacing
elements and drip bowls.
Line up openings in the drip bowl with the coil element
receptacle.
Hold the element as level as possible with the terminal just
started into the receptacle. Gently push the element terminal
into the receptacle.
When terminal is pushed into the receptacle as far as it will
go, push down the edge of the element opposite the
receptacle.
17
CERAMIC GLASS (on some models)
Always wipe with a clean, wet cloth or sponge and dry thoroughly
to prevent streaking and staining,
Cooktop Polishing Creme is recommended regularly to help
prevent scratches, pitting and abrasions and to condition the
cooktop
A Cooktop Scraper is also recommended for stubborn soils. The
Cooktop Scraper uses razor blades. Store razor blades out of
the reach of children.
Steps to follow:
Most spills can be wiped off easily using a paper towel or
clean, damp cloth as soon as Hot Surface indicator light(s) go
off,
Carefully scrape off any burnt-on food with a razor blade
scraper.
Rub Cooktop Polishing Creme into cooked-on soil using a
paper towel. If some soil remains, leave some creme on the
spot(s) and follow the steps mentioned in the bullet above.
Finish by polishing entire cooktop with Cooktop Polishing
Creme and a paper towel.
Additional tips:
Remove dark streaks, specks and discoloration with Cooktop
Polishing Creme after the cooktop has cooled.
Tiny scratches or abrasions do not affect cooking. In time,
these will become less visible as a result of regular use of
Cooktop Polishing Creme.
To avoid damaging the cooktop, follow these instructions:
Do not use cooktop cleaner on a hot cooktop,
To remove spills from hot elements:
Turn OFF the element:
Remove sugary spills with razor scraper while the cooktop is
still warm, You may want to wear oven mitts while doing so.
Clean elements with Cooktop Polishing Creme after it has
cooled down.
Remove heavy or sugary spills IMMEDIATELY from hot
elements following the procedure given above. Sugar spills
and soils (such as jams, jellies and candy syrups) can cause
pitting on the cooktop if not removed while the ceramic
surface is still warm,
Do not allow anything that may melt (such as plastic,
aluminum foil) to come in contact with the surface while it is
hot.
Do not use the cooktop as a cutting board.
Do not use steel wool, abrasive powdered cleansers,
abrasive cleaning pads, chlorine bleach, rust remover,
ammonia or glass cleaning products with ammonia, These
could damage the cooktop surface,
Dropping heavy or hard objects on the cooktop can crack it,
Be careful with heavy skillets, Do not store jars or cans above
the cooktop.
Lift pots and pans onto and off the cooktop. Sliding metal
pans on the glass ceramic cooktop surface may leave marks.
Remove metal marks from copper or aluminum pans with
Cooktop Polishing Creme before heating the cooktop again.
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears. The marks will not totally
disappear but after many cleanings become less noticeable.
If heated before cleaning, metal marks may not come off.
Using a pan with a nicked or scratched bottom may damage
the glass ceramic cooktop.
Make sure bottoms of pans are clean and dry before using,
Heating a soiled pan may leave a stain on the cooktop,
Avoid spillovers. Use pans with tall sides.
Do not cook food directly on glass ceramic cooktop,
BURNER BOWLS (on some models)
Chrome
Solution of 1/2cup (125 mL) ammonia to 1 gallon (3.75 L)
water:
Soak for 20 minutes, then scrub with mildly abrasive cleanser.
Oven cleaner:
Follow product label instructions.
Mildly abrasive cleanser:
Scrub with wet pad.
Do not put in oven during Self-Cleaning cycle.
Porcelain enamel only, not chrome
Dishwasher
Do not put in oven during Self-Cleaning cycle.
CONTROL PANEL
Do not use steel wool or abrasive cleansers.
Do not spray cleaner directly on panel.
Sponge and warm, soapy water.
Paper towel and mild liquid soap.
NOTE: Remember to replace support, gasket, control panel and
control knobs after cleaning.
COOKTOP VENT
Clean often to prevent grease build-up.
Vent cover and Filter:
Warm, soapy water.
Sponge.
Dishwasher.
18
OVEN CAVITY
Food spills containing sugar or milk products should be cleaned
when oven cools, as soon as possible after happening. At high
temperatures, sugar reacts with porcelain and staining, etching,
pitting or faint white spots can result.
Self-Cleaning models
Self-Cleaning cycle:
See "Self-Cleaning Cycle" section.
Standard-Cleaning models
For easier cleaning, the oven door can be removed according to
the "Removable Oven Door" section.
Oven cleaner:
Make sure room is well-ventilated. Do not let cleaner contact
gasket, thermostat or exterior surfaces because damage will
occur. Line the floor with newspaper. Follow product label
instructions.
OVEN RACKS
Steel wool pad
On Self-Cleaning models, the Self-Cleaning cycle:
See "Self-Cleaning Cycle" section first regarding racks.
BROILER PAN AND GRID
Do not clean in the Self-Cleaning cycle.
Solution of 1/2cup (125 mL) ammonia to 1 gallon (3.75 L)
water:
Soak for 20 minutes, then scrub with scouring or steel wool
pad.
Oven cleaner:
Place pan and grid on newspaper. Spray with oven cleaner.
Follow product label instructions.
Mildly abrasive cleanser:
Scrub with wet scouring pad.
Dishwasher
To Replace the Fluorescent Light Tube:
1. Unplug range or disconnect power.
2. Flip up the top of the backguard.
3. Grasp both ends of the fluorescent tube.
4. Turn the tube 90 ° in either direction until both ends come out
of the receptacles.
5. Replace tube, replace top of the control panel.
6. Plug in range or reconnect power.
The oven light is a standard 40-watt appliance bulb. It will come
on when the oven door is open. It will not work during the Self-
Cleaning cycle. On some models, when the oven door is closed,
press OVEN LIGHT to turn it on or off.
Before replacing, make sure the oven and cooktop are cool and
the control knobs are off.
To replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
The control panel glass can be removed for easier cleaning. Do
not clean the electronics behind the glass because damage can
Occur.
To Remove:
1. Remove control knobs by pulling straight out.
2. Release clips.
3. Remove glass by pulling slightly up and forward.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb and bulb cover by turning clockwise.
5. Plug in range or reconnect power.
19
The 120v appliance outlets located on the control console may
be used to run portable appliances placed on counter tops
beside the range,
The outlets operate independently and are not affected by range
control settings.
NOTE: Do not place appliances on the cooktop, Damage to the
appliance could result if the cooktop is hot,
Appliance Outlet Circuit Breakers:
The circuit breakers for the appliance outlets on your range are
located under the cover on top of the control console. They are
rated for 12 amps.
Lift the cover by lifting the front edge at both ends.
On models equipped with a fluorescent cooktop light, remove the
fluorescent tube to gain access to the circuit breakers.
To Replace:
1. Hold oven door by the handle and place the top of the door
under the cooktop overhang.
2. Use front of leg to apply pressure to slide hinges into the slots
as far as possible.
3. Use side of leg to apply pressure to the bottom of the door
front.
4. Lift door slightly. Apply pressure and push until the hinges
have gone in fully.
For normal range use, it is not suggested to remove the oven
door. However, if necessary, follow these instructions. The oven
door is heavy.
To Remove:
1. Open oven door to the stop position (open about 4 in. [10
cm]).
2. Lift door slightly and pull out and back until hinges come out
to the catch position.
3. Push door down and pull straight out to remove door
completely.
Thestorage drawer can be removed. Beforeremoving, makesure
drawer is cool and empty.
To Remove:
1. Pull drawer straight out to the first stop.
2. Lift up the back of the drawer and pull out,
To Replace:
1. Fit the ends of the drawer rails into the guides in the cavity.
2. Slide the drawer closed.
When the storage drawer is removed, the sweep-thru base
makes cleaning easier and provides access to the leveling legs.
1. Sweep-thru base
2O
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Whirlpool IHE37301 Le manuel du propriétaire

Catégorie
Cuisinières
Taper
Le manuel du propriétaire

dans d''autres langues