ASA Electronics JHD962BTBP Le manuel du propriétaire

Marque: ASA Electronics

Modèle: JHD962BTBP

Taper: Le manuel du propriétaire

Ce manuel convient également à

JHD962BT

JHD962BT/JHD962BTBP

AM/FM/RBDS/WB/USB/BT/DAB+ Heavy Duty Radio

Installation and Operation Manual

CONTENTS

Introduction .........................................................................................................................................................3

Safety Information .............................................................................................................................................4

Installation ............................................................................................................................................................5

Wiring .....................................................................................................................................................................6

Basic Operation ................................................................................................................................................... 7

Tuner Operation ............................................................................................................................................... 10

Bluetooth Operation ...................................................................................................................................... 13

App Operation .................................................................................................................................................. 16

Care and Maintenance .................................................................................................................................. 16

Troubleshooting .............................................................................................................................................. 17

Specications .................................................................................................................................................... 18

FCC Notes ........................................................................................................................................................... 19

INTRODUCTION

System Features

Features of JENSEN JHD962BT mobile audio system include:

• 50 watts max power (25W x 2); 20 watts RMS (10W x 2)

• Bluetooth® streaming audio (A2DP/AVRCP) and hands-free

calling (HFP) — compatible with JMICHFP and JMICHFP2

microphones (sold separately)

• Water and UV resistant front panel (IPX6)

• App control ready

• DAB+ (Digital Audio Broadcasting)

• Weatherband

• AM/FM tuner with 30 presets

• RBDS (Radio Broadcast Data Service) with PTY search

• Rear USB port for device charging (1 amp output)

• Stereo pre-amp line level output (2V RMS)

• Amplier remote trigger (12VDC)

• Audio settings (volume/bass/treble/balance/fade)

• Toggle switch between day and night display

• Full dot matrix LCD

• 2-wire power with non-volatile memory and clock support

• Remote turn on

• Low battery alert

• Work timer

Content List

• JENSEN Heavy Duty Radio

• Hardware Kit

• Mounting Bracket

• Mounting Bracket Fasteners

• Quick Reference Guide

HARDWARE KIT CONTENTS

JHD962BT/JHD962BTBP

Radio

Mounting Bracket

Self-Tapping

Screws (4)

M4 Machine

Screws (4) Washers (4)

Hex Nuts (4)

Machine Screws

With Nuts (4)

Wiring Harness

NOTE: The JHD962BTBP is the OEM bulk pack version of the

JHD962BT with Fakra type antenna connectors.

The JHD962BTBP does not include wiring harness or mounting

hardware.

SAFETY INFORMATION

When Driving

Keep the volume level low enough to be aware of the road and trac conditions.

When Parked

Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down

before starting playback.

Use the Proper Power Supply

This product is designed to operate with a 12-volt DC negative ground battery system.

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED

ACCESSORIES.

INSTALLATION

Mounting the Bracket

Two options are provided for mounting the bracket (self-

tapping screws or machine screws with nuts) to ensure a

mounting option ideal for your mounting location. Avoid

obstructing airow to the rear cooling ns on the radio.

NOTE: Mounting holes should be drilled to 7/32”. Before

drilling the mounting holes, make sure the area behind the

panel where the holes are desired is clear of wires and fuels,

vacuum and or brake lines.

Bracket metal

Vehicle mounting surface

Washer

Nut

Mounting Stack

Mounting machine screw

Self-Tapping

Screws

(Hole size 7/32”)

Machine Screws

With Nuts

(Hole size 7/32”)

Attaching the Radio

Once the bracket is securely mounted, use the four included

M4 machine screws to fasten the bracket to the back of the

radio. Alternatively, the radio can be mounted directly to the

instrument panel if access to the rear of the instrument panel.

CAUTION! Do not over tighten the 4 mounting screws. Hand

tighten only.

Regular Mounting Overhead Mounting

WARNING: To disconnect the vehicle battery before wiring

the unit.

WIRING

WARNING!

Do not connect the +12VDC ACC switched wire to the

battery. This wire MUST be connected to the Accessory/

Ignition wire or a +12 volts switched power source.

Pin No. Color Description

BlackGround

2N/A No Connection

Red +12V DC Switched

4Gray Right Speaker+

5Gray/Black Right Speaker-

6White Left Speaker+

7N/A No Connection8

White/Black Left Speaker-

Dark Blue Amp Remote(+12VDC 500MA)

N/AWhiteBT Antenna

N/A Light Blue Power Antenna

External Antenna

N/ABlack

BlackUSB Pigtail

N/A

Gray/Red Line Out(R)

Gray/White Line Out(L)

BlackMic-Wire

Gray(JHD962BT

Black(JHD962BTBPDAB+ Antenna

JHD962BT JHD962BTBP

GROUND (BLACK)

+12V DC SWITCHED (RED)

LEFT SPEAKER + (WHITE)

LEFT SPEAKER - (WHITE/BLACK)

AMP REMOTE (+12VDC 500MA)

(DARK BLUE)

RIGHT SPEAKER + (GRAY)

RIGHT SPEAKER - (GRAY/BLACK)

VIEW A-A

WIRE INSERTION VIEW

GROUND (BLACK)

+12V DC SWITCHED (RED)

LEFT SPEAKER + (WHITE)

LEFT SPEAKER - (WHITE/BLACK)

AMP REMOTE (+12VDC 500MA) (DARK BLUE)

RIGHT SPEAKER + (GRAY)

RIGHT SPEAKER - (GRAY/BLACK)

VIEW B-B

WIRE INSERTION VIEW

9-PIN CONNECTOR(MALE)

FUSE 10A

3.Amp Remote (+12VDC 500MA) (Dark Blue)

6. Left Speaker + (White)

LEFT

SPEAKER +

AMP REMOTE

(+12VDC 500MA)

9. +12V DC Switched (Red)

+12V DC

SWITCHED

5. Right Speaker - (Gray/Black)

RIGHT

SPEAKER -

4. Right Speaker + (Gray)

RIGHT

SPEAKER +

7. Ground (Black)

GROUND

2. Left Speaker - (White/Black)

LEFT

SPEAKER -

8.0"±0.5

Heat shrink

STRIPPED AND TINNED

3/8"

WIRE 18GA

WIRE 20GA

WIRE 18GA

9-PIN CONNECTOR(FEMALE)

DAB+ Antenna

Black

16.2" ± 0.5

Dark Blue

Red

Black

White

Gray

White/Black

Gray/Black

Gray

5.0"±1.0

Gray

5.0"±1.0

Black

16.7 " ± 0.5

Black

5.0"±0.5

USB Pigtail

External Antenna

Line Out (R)

Line Out (L)

LINE OUT

RIGHT LINE OUT

LEFT

ALL CONDUCTORS 26GA

ANTENNA

USB

Light Blue

6.0"±0.5

Heat shrink

POWER

ANTENNA

Black

7.0"±1.0 Mic -Wire

ALL CONDUCTORS 26GA

MIC

White

BLUETOOTH ANTENNA

DO NOT CUT

DO NOT CONNECT

2.0"±.25

1.5"±.25

FAKRA FEMALE

(A)

FAKRA FEMALE

(B)

DAB

ANTENNA

Jet Black

Cream

Black

White

Red

White

(Female)

(Male)

9.0"±1.0

BT Antenna

Power Antenna

9-PIN CONNECT

OR(FEMALE)

Dark Blue

Red

Black

White

Gray

White/Black

Gray/Black

ALL WIRES 20GA

9.0"±1.0

BT Antenna

Power Antenna

Heat shrink

White

Light Blue

Black

5.0"±1.0

Black

5.0"±0.5

Gray

5.0"±1.0

Gray

5.0"±1.0

Gray

5.0"±1.0

Black

7.0"±1.0

External Antenna

DAB+ Antenna

Mic-Wire

ALL CONDUCTORS 20GA

ALL CONDUCTORS 26GA

USB Pigtail

Line Out (R)

Line Out (L)

DAB

ANTENNA

BASIC OPERATION

Power On/O

Press the POWER button (1) to turn the unit on. The unit will

resume at the last mode (Tuner, BT, etc.) after turn on. Press

and hold the POWER button (1) to enter standby mode.

Dimmer Control

A short press of the POWER button (1) will switch the

dimmer on/o. While the dimmer is o, the unit will be at

full brightness for daylight viewing. While dimmer is on, the

backlight will dim for night viewing. The dimmer brightness

level can be adjusted in the system settings.

Volume Control

To increase the volume, press the button (20). To decrease

the volume, press the button(19).

Play/Pause/Mute

Press the button (18) on the control panel to pause or

mute the audio output. Press button again to unmute or

restore the audio output to the previous level.

Mode

Press the MODE button (2) to select a dierent mode of

operation, as indicated on the display panel. Available modes

include the following: FM > AM > Weatherband > BT Audio.

FM is the default source mode on initial power up.

NOTE: DAB+ Digital Radio mode will be skipped when the

Region menu option is set to “USA/Russia/Japan.”

NOTE: Weatherband mode will be skipped when the Region

menu option is set to “Europe/Russia/Japan.”

Reset

The RESET button (10) should be activated for the following

reasons:

• Initial installation of the unit when all wiring is completed.

• Function buttons do not operate.

• Error symbol on the display.

Use a ballpoint pen or thin metal object to press the reset

button. This may be necessary should the unit display an error

code.

Audio Menu

Press the SETTINGS button (11) to access the audio menu. You

can navigate through the audio menu items by pressing the

17 16 15 14 13 12

3 4 5 6

SETTINGS button repeatedly or or buttons (9, 8). Once the

desired menu item appears on the display, adjust that option

by pressing the or buttons (20, 19) within 5 seconds. The

unit will automatically exit the audio menu after ve seconds

of inactivity. The following menu items can be adjusted.

Loudness:

Press the or buttons (20, 19) to toggle the loudness on/o.

When listening to music at low volumes, this feature will boost

the bass/treble range to compensate for the characteristics of

human hearing.

Bass Level

Press the or buttons to adjust the Bass level range from “-7”

to “+7.”

Treble Level

Press the or buttons to adjust the Treble level range from

“-7” to “+7.”

Balance

Press the or buttons to adjust the Balance between the

left and right speakers from “Left 7” to “Right 7.”

System Menu

1. Press and hold the SETTINGS button (11) for more than 2

seconds to enter the system menu.

2. Press the SETTINGS button repeatedly or or buttons (9,

8) to navigate the system menu.

3. Press the or buttons (20, 19) to adjust the selected

menu item. Press the ENTER/TIMER button (6) to select

the desired item.

The unit will automatically exit the system menu after 5

seconds of inactivity. The following items can be adjusted:

• LCD Dimmer (1-10): Adjust LCD backlight

• LCD Contrast (1-10): Adjust LCD contrast

• Bluetooth Devices: Press to ENTER/TIMER button (6) to

enter sub-menu. Press or buttons (9, 8) to navigate

list. List loops. Press ENTER/TIMER button to select

device. Press or to navigate selected device’s menu

of available options (Lock/Unlock > Connect/Disconnect

> Delete and List loops). Press ENTER/TIMER button to

select options.

• Lock/Unlock: Press ENTER/TIMER button to lock

or unlock device. Lock icon displays next to device

name in menu when device is locked.

• Connect/Disconnect: Press ENTER/TIMER button to

connect or disconnect previous paried device.

• Delete: Option only available if selected device is

unlocked. Press ENTER/TIMER button to delete.

• Call Auto Answer (On/O): Turn call auto answer setting

On/O.

• Call Volume (On/O): Adjust call volume Decrease/

Increase respectively.

• Clock Set: Setting the clock (HH:MM) and hour format.

• LV ALARM (On/O): Low Voltage Alarm On. Monitor

voltage on ACC line and send alert when voltage is low.

• LVAO (On/O): Low Voltage Auto O. Automatically turn

o power to radio when battery voltage is low.

• P--O TUNE (On/O): Preset-Only Tune On. If ‘Preset-Only

Tune’ is set to ‘On’ in System Settings, only presets from all

bands are recalled in sequence.

• Tuning Region (USA/EURO/RUSSIA/JAPAN): Set frequency

spacing for various regions.

• USA Tuning Region (AM > FM > WX > Bluetooth)

• Europe Tuning Region (AM > FM > DAB+ > Bluetooth)

• Japan & Russia Tuning Region (AM > FM > Bluetooth)

• DAB+: Press to ENTER/TIMER button to enter sub-menu.

Press or buttons to navigate list.

• Announcements: Press to ENTER/TIMER button to

enter sub-menu.

• New Flash (On/O)

• Transport Flash (On/O)

• Area Weather Flash (On/O)

• Warning/Service (On/O)

• Event Announcement (On/O)

• Antenna Power (On/O): Turn supplied power On

and O to the DAB antenna.

• Clock Sync (On/O): To synchronize the clock display.

• Key Beep (On/O): Turn the audible beep On/O (heard

when functions/buttons are selected).

• Reset System Defaults: Press the ENTER/TIMER button and

then press 2(16) to Conrm. Press the ENTER/TIMER to

return the unit to factory default set up values.

• System Info: Display rmware version.

NOTE: Bluetooth Device menu options are only available

while the Bluetooth feature is ON and the radio is in Bluetooth

Audio mode.

NOTE: A locked Bluetooth device will not be overwritten from

the list.

Low Voltage Alarm Operation

If Low Voltage Alarm is set to “On,” an alarm will sound (8

beeps every 30 sec) when the voltage drops to 10.5V (+/-

0.3V). A visual warning (LOW VOLTAGE) will appear. Press any

button to dismiss visual warning (reappear every 10-minutes)

in the LCD display.

NOTE: “Oﬀ” is the default setting for Low Voltage Alarm. If the

audio is muted or the volume is set to 0, the audible beep will

not be heard.

Liquid Crystal Display (LCD)

The liquid crystal display (LCD) panel (4) displays the

frequency, time and activated functions.

NOTE: LCD panels may take longer to respond when subjected

to cold temperatures for an extended period of time. In

addition, the visibility of the characters on the LCD may

decrease slightly. The LCD display will return to normal when

the temperature increases to a normal range.

Setting the Clock

To set the clock to display the current time, turn the vehicle

ignition on and turn the radio on. Enter the system menu and

adjust the clock by selecting the “Set Clock” menu item.

• Press ENTER/TIMER button (6) to enter clock setting

menu.

• Press or to select hours, minutes, or 12/24 hour format.

• Press or to adjust the setting eld.

When no adjustment is made, the time will become set and

normal operation will resume.

Setting Work Timer

To activate the work timer clock and running in the

background.

• Press ENTER/TIMER button (6) to display work timer.

• Press ENTER/TIMER button again to start/stop work timer.

• Press & hold ENTER/TIMER button to reset work timer.

• Press RETURN button (5) to exit work timer display.

If timer is exited while running, “TIMER” ashes every 10

seconds for 2 seconds in place of clock in footer right on the

display.

Select a Band

Press the BAND/PTY button (3) to change between FM1, FM2,

FM3, AM1 and AM2.

Manual Tuning

Press & hold the or buttons (9, 8) to seek stations up/

down step by step.

Auto Seek Tuning

Press the or buttons (9, 8) to automatically seek the next

or previous strong station.

NOTE: Seek tuning is not available for Weatherband channels.

Use the up or down tuning buttons to manually select any of

the seven available Weatherband channels.

17 16 15 14 13 12

3 4 5 6

TUNER OPERATION

Preset Stations

Six numbered preset buttons store and recall stations.

Store a Station

Select a station, then press and hold a preset button from 1 –

6 on the number buttons (12-17) for two seconds. The preset

number will appear on the LCD.

Recall a Station

Press a preset button from 1 – 6 on the number buttons to

select the corresponding stored station.

NOTE: Preset buttons are pre-assigned frequencies in

Weatherband mode.

Automatically Store/Preset Scan (AS/PS)

Automatically Store

Select an AM or FM band. Press and hold the AS•PS button (5)

for 2 seconds to automatically nd and store strong stations.

“Storing Presets” appears on the screen and the new stations

replace any stations already stored.

Preset Scan

Select a band. Press AS•PS to scan stations stored in the

current band. The unit will pause for 10 seconds at each

preset station. Press AS•PS again to stop scanning when the

desired station is reached.

RBDS Operation

This unit is equipped to display RBDS (Radio Broadcast Data

Service) information when broadcast by the radio station.

NOTE: Radio stations broadcasting RBDS may not be available

in your listening area.

In FM radio mode, press & hold the BAND/PTY button (3) for

2 seconds to list the following Program Type (PTY) options:

ANY/News/Information/Sports/Talk/Rock/Classic Rock/Adult

Hits/Soft Rock/Top 40/Country/Oldies/Soft/Nostalgia/Jazz/

Classical/Rhythm and Blues/Soft Rhythm & Blues/Foreign

Language/Religious Music/Religious Talk/Personality/Public/

College/Weather/Emergency Test/Emergency.

To search for stations in a PTY category:

1. Press the BAND/PTY button to view the current PTY

category.

2. Press the or buttons to move through the list of

available categories and select the program type you wish

to search.

3. After selecting the desired PTY, press the ENTER/TIMER

button (6) to search the band for broadcasts of this type.

“Searching PTY” is displayed while the tuner is searching.

NOTE: Performing a PTY search on “ANY” will Seek Tune and

stop on any station broadcasting RBDS, regardless of the

program type.

NOTE: The RBDS (Radio Broadcast Data Service) is disabled

when the Preset-Only Tuning is On in system menu.

Weatherband Operation

What is the NOAA Weather Radio/Weatheradio Canada?

NOAA (National Oceanic and Atmospheric Administration) is a

nationwide system that broadcasts local weather emergency

information 24 hours a day via the National Weather Service

(NWS) network. The U.S. network has more than 750 stations

covering the 50 states as well as the adjacent coastal waters,

Puerto Rico, the U.S. Virgin Islands and the U.S. Pacic

Territories. Each local area has its own transmitting station

and there are a total of seven broadcasting frequencies used.

A similar system is available in Canada under the Weatheradio

Canada service administered by Environment Canada.

Tuning to Weatherband

Press and hold the MODE button (2) repeatedly to reach the

Weatherband. The indication "WB" will appear on the display

panel, along with the current number and channel indication:

"WB-1", “WB-2", "WB-3", "WB-4", "WB-5", "WB-6" or "WB-7." The

seven frequencies are shown in the following table:

WB Frequencie

Frequency (MHz) Preset

162.400 2

162.425

162.450

162.475

162.500

162.525

162.550

The above table also shows which preset button will access the

frequency. Note that one frequency cannot be accessed using

a preset button. The frequency can only be reached using the

tuning controls.

Use the or buttons (9, 8) or the preset buttons to tune to

each of the seven channels until you nd the weatherband

station broadcasting in your area.

How many stations can I expect to receive?

Since the broadcasts are local weather and information,

the transmission power is usually very low (much less than

standard AM or FM stations) so you will usually receive only one

station unless you are on the edge of two or more broadcast

signals. The most you will receive will be two or three, and that

is rare.

Is it possible I won't receive any stations?

Depending on where you are located, there is a possibility you

will receive only a very weak signal or none at all. Also, similar

to AM and FM signals, weatherband signals are subject to

surrounding conditions, weather, obstructions of the signal by

hills or mountains, etc.

DAB+ Digital Radio Operation

Digital Audio Broadcasting (DAB/DAB+) is designed for delivery

of high-quality digital audio programs and data services

from terrestrial transmitters in the Very High Frequency (VHF)

frequency bands.

For more information about (DAB/DAB+) services and to nd a

list of stations available in your area, visit www.worlddab.org

Select a Band

Press the BAND/PTY button (3) to change between DAB+1,

DAB+2 and DAB+3 band.

Service List Update

Press and hold the AS•PS/RETURN (SLU) button (5) to start

service list update. The “Service List Updating” will display

and start updating the service list. Press AS•PS/RETURN (SLU)

button to cancel service list update.

Select a Service

Press and hold the BAND/PTY(SL) button (3) to display

Service list menu. While in Service list, press or buttons (9,

8) to navigate down or up service list respectively (list loops).

Press ENTER/TIMER (6) to select desired Service label and

system exits to current selected Service label screen.

Search for An Ensemble

Press and hold the or buttons (9, 8) to automatically

search for an available ensemble, service or component to

play. Press or buttons (9, 8) to manual select an ensemble.

Press ENTER/TIMER (6) to conrm.

Store or Recall Service

Six numbered preset buttons store and recall stations.

Store a Service

Select a station, then press and hold a preset button from 1 –

6 on the number buttons for two seconds. The preset number

will appear on the LCD.

Recall a Store Service

Press a preset button from 1 – 6 on the number buttons to

select the corresponding stored service.

BLUETOOTH OPERATION

The JHD962BT includes built-in Bluetooth technology that

allows you to connect this head unit to Bluetooth devices for

streaming audio playback.

About Bluetooth Technology

Bluetooth is a short-range wireless radio connectivity

technology developed as a cable replacement for various

electronic devices. Bluetooth operates in 2.4 GHz frequency

range and transmits voice and data at speeds up to 2.1 Mbit/s

over a range of up to 10 meters.

17 16 15 14 13 12

3 4 5 6

Bluetooth Menu Options

NOTE: Please note that some BT menu options are only

available while the unit is in Bluetooth Audio mode.

Press and hold the SETTINGS button (11) for more than

2 seconds to enter the system menu. Press the SETTINGS

button repeatedly or or buttons (9, 8) to view the

Bluetooth Setup Menu options. Press ENTER/TIMER button (6)

to choose the highlighted option.

• Call Auto Answer: Press the or buttons (19, 20) to turn

the Auto Answer function “On” or “O.”

• Call Volume: Press the ENTER/TIMER button repeatedly to

adjust the call volume from 0-40 (default volume is 30).

• BT Device List: Press the ENTER/TIMER buttons to view

a list of previously paired mobile phone device models.

Press the or buttons to navigate devices from the list.

You cannot delete a device that is actively connected.

Press the ENTER/TIMER button to select the device. Press

the or buttons to choose Lock/Unlock, Disconnect or

Delete for this device.

• LOCK/UNLOCK: The JHD962BT can store up to 5 devices

for Bluetooth connection. The devices are stored in FIFO

(First in First Out) order. To prevent a device from being

bumped from the list when more than 5 devices are used,

you must lock the device. To lock/unlock a device, press

the ENTER/TIMER button to display/change the Locked or

Unlocked icon.

• DISCONNECT: To disconnect a paired device, press the

ENTER/TIMER button to temporarily remove the Bluetooth

link. The link can be re-established through your phone

menu by selecting the JHD962BT for connection.

• DELETE: To delete a device from the list, press the ENTER/

TIMER button.

NOTE: Device must be disconnected to be deleted.

Use or to

Navigate the List

Press ENTER/TIMER Press ENTER/TIMER

Device 1

Device 2

Device 3

Device 4

Device 5

Lock/Unlock

Connect/Disconnect

Delete

Lock/Unlock

Connect/Disconnect

Delete

BT Device

Device 1

...

Device 5

Pairing a Bluetooth Device

Before you begin, consult the owner’s manual for the

Bluetooth device you want to pair with the JHD962BT.

Bluetooth Quick Pair:

1. On your personal Bluetooth device, enter the Bluetooth

settings list. Make sure your device has Bluetooth turned

on and is searching for new devices.

2. Press and hold the MODE/PAIR button (2) for three

seconds to make the JHD962BT available on your

Bluetooth device.

3. On your Bluetooth device, select JHD962BT once it

becomes available to pair and connect your device. Enter

the pairing password (0000), if requested.

After connecting successfully, you will be able to listen to

music stored on your Bluetooth enabled device through the

radio.

BT Audio (A2DP)

The A2DP music is available for Bluetooth enabled phones

when the phone is connected. To access Bluetooth mode

and play songs stored on your phone, press the MODE/PAIR

button. While in Bluetooth mode, the Bluetooth Audio icon

will appear on the LCD.

Selecting Tracks

During playback, press the or buttons (9, 8) to play the

previous or next track.

Pausing Playback

During playback, press the button (18) to pause the

Bluetooth AUDIO player. “Pause” will appear on the LCD. Press

again to resume playback. If you change to another mode,

the mobile phone audio will pause. Press the MODE/PAIR

button (2) to return to Bluetooth mode and resume mobile

phone audio playback.

NOTE: If a Bluetooth device is disconnected due to the power

being turned oﬀ or if the device is disconnected inadvertently,

the unit will automatically search for the matching Bluetooth

device when the power is restored.

Incoming/Outgoing calls

While the mobile device is connected through Bluetooth, the

phone number for incoming calls will appear on the LCD. The

incoming ring will be output through the unit.

Answer Call

If the Bluetooth Auto Answer function is turned “O, ” the

user must press the "CALL" button (7) to receive an incoming

call. If the BT Auto Answer function is turned “On,” the unit

will automatically receive the incoming call after 5 seconds of

ringing.

While the microphone (JMICHFP/JMICHFP2) is connected

to the unit, the user can answer incoming calls through the

Microphone.

Transfer Call

During the call, press and hold the "CALL" button transfer the

call between the unit and the mobile device.

End Call

Press the “CALL” button to end a call. The unit will return to

the previous mode.

Reject Incoming Call

To reject an incoming call, press and hold the “CALL” button.

Outgoing Call

Press the “CALL” button to call last call out number.

APP OPERATION

ASA Audio App Controller is the ultimate wireless remote

control for your JENSEN stereo system. Store away your

old remotes and enjoy the convenience of all the primary

functions of your JENSEN stereo right from your phone or

tablet by transforming your mobile device into a functional

stereo remote control!

Features

This app controls all of the primary functions of your stereo

features including:

• Power on/o

• Volume and mute

• Source mode selection

• Playback, tuning, switch song

• Audio menu controls - bass, treble, balance, fader,

loudness, volume and speaker

Connecting and using ASA Audio Control app

The ASA Audio Control app can be found on the App Store for

Apple Devices and the Google Play Store for Android Devices.

After downloading and installing ASA Audio Control app on

your device, pair your device to the JHD962BT as stated above

for Bluetooth pairing. Once your device is paired you can

open and begin using the app.

When ASA Audio Control is installed on Android operating

system, close the app before Bluetooth pairing, otherwise

there may be errors on Bluetooth connection.

CARE AND MAINTENANCE

• Keep the product away from dust and dirt, which can

cause premature wear of parts.

• Handle the product gently and carefully. Dropping it

can damage circuit boards and cases, and can cause the

product to work improperly.

• Wipe the product with a dampened cloth occasionally to

keep it looking new. Do not use harsh chemicals, cleaning

solvents, or strong detergents to clean the product.

• Use and store the product only in normal temperature

environments. High temperature can shorten the life of

electronic devices, damage batteries, and distort or melt

plastic parts.

Ignition

The most common source of noise in reception is the ignition

system. This is a result of the radio being placed close to the

ignition system (engine). This type of noise can be easily

detected because it will vary in intensity of pitch with the

speed of the engine.

Usually, the ignition noise can be suppressed considerably

by using a radio suppression type high voltage ignition wire

and suppressor resistor in the ignition system. (Most vehicles

employ this wire and resistor but it may be necessary to check

them for correct operation.) Another method of suppression

is the use of additional noise suppressors. These can be

obtained from most CB radio or electronic supply shops.

Interference

Radio reception in a moving environment is very dierent

from reception in a stationary environment (home). It is very

important to understand the dierence.

AM reception will deteriorate when passing under a bridge

or when passing under high voltage lines. Although AM

is subject to environmental noise, it has the ability to be

received at great distance. This is because broadcasting

signals follow the curvature of the earth and are reected

back by the upper atmosphere.

Symptom Cause Solution

No power The vehicle’s

accessory switch

is not on

If the power supply is

properly connected to

the vehicle’s accessory

terminal, switch the

ignition key to “ACC.”

Fuse is blown Replace the fuse.

No sound Volume too low Adjust volume to

audible level.

Wiring is

not properly

connected

Check wiring

connections.

The

operation

keys do not

work

Built-in

microcomputer

is not operating

properly due to

noise

Press the RESET

button.

Cannot tune

to radio

station,

auto-seek

does not

work

Antenna cable is

not connected

Insert the antenna

cable rmly.

Signals are too

weak.

Select a station

manually.

ERROR-01

on LCD

Database or

decoder error

Change to another

mode.

TROUBLESHOOTING

SPECIFICATIONS

FM Radio

Frequency Coverage (USA) .......................................................................................................................................................................... 87.5-107.9MHz

Frequency Coverage (Europe/Russia/Japan) .................................................................................. 87.5-108MHz/87.5-108MHz/76.0-90.0MHz

Sensitivity (S/N=30dB) ...............................................................................................................................................................................................≤14dBμV

Stereo Separation .............................................................................................................................................................................................................>25dB

AM/MW

Frequency Range (USA) ....................................................................................................................................................................................530-1710kHz

Frequency Range (Europe/Russia/Japan) ........................................................................................... 522-1620kHz/522-1620kHz/522-1629kHz

Sensitivity (S/N=20dB) ...............................................................................................................................................................................................≤25dBμV

General

Frequency band(s) (for Bluetooth) ............................................................................................................................................................................ 2.4GHz

Maximum radio-frequency power transmitted (for Bluetooth) ......................................................................................................................4dBm

Operating Voltage. ................................................................................................................................................................................................. DC 12-Volts

Grounding System ...................................................................................................................................................................................................... Negative

Ground Speaker Impedance ..........................................................................................................................................................4-8 ohms per channel

Tone Controls:

Bass (at 100Hz) ...............................................................................................................................................................................................................±10dB

Treble (at 10kHz) ............................................................................................................................................................................................................ ±10dB

Max Power Output ........................................................................................................................................................................................................ 25W x 2

RMS Power Output ....................................................................................................................................................................................................... 10W x 2

Idle/Standby Current..................................................................................................................................................................................................... <50mA

Fuse Rating .................................................................................................................................................................................................................10Ampere

Max Dimensions ..........................................................................................................................................................131.5 (W) x 57.5 (D) x 86.1 (H)mm