Sena SP126 Manuel utilisateur

Marque: Sena

Modèle: SP126

Taper: Manuel utilisateur

Vous trouverez ci-dessous de brèves informations pour Adaptateur WiFi SP126. L'adaptateur WiFi est un appareil pour SENA WIFI2.4G qui charge et fournit une mise à niveau automatique du micrologiciel. L'adaptateur WiFi peut se connecter automatiquement au routeur via l'application mobile, télécharger automatiquement le dernier micrologiciel disponible pour l'appareil SENA et peut toujours être mis à niveau vers le dernier micrologiciel en comparant la version du micrologiciel lorsque l'utilisateur branche l'appareil SENA sur le port USB pour le chargement.

WiFi Adapter Manual

1. Introduction

WiFi Adapter is a device for SENA WIFI2.4G that charges and provides auto firmware upgrade.

WiFi Adapter can automatically connect to the router through the mobile app, automatically

download the latest firmware available for SENA Device, and can always upgrade to the latest

firmware through comparing firmware version when the user plugs SENA Device into the USB

port to charge.

2. WiFi Adapter features

●Supports WiFi related IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

●Smartphone App for iPhone and Android

●Firmware upgradeable

3. Contents

- Wifi Adapter

4. Product description

5. Getting started

a. Power On:

Insert the USB port into the charger and insert the Micro USB Port into the “USB power

port”

b. Connecting to WiFi

1. Open the mobile app

2. Connect to WiFi Docking

3. Setting WiFi Docking Station configuration

4. Select the WiFi router to connect to.

5. Enter the password of the selected WiFi router and click “Connect”

6. WiFi Adapter is connecting to the router.

7. Click “Setup Complete” when connected

8. After following these steps, WiFi Adapter should be connected to WiFi. “WiFi status” LED will

show blue light if the WiFi router is connected successful and show red light if there has

been a failure to connect.

9. To change the router connection, repeat the steps above.

10. You can update Sena devices such as 30K manually and update WiFi Docking Station

c. Charging SENA Bluetooth device

Plug in the Micro USB to sena Bluetooth device to charge the device. The “Charging status

LED” will show red light while charging and turn blue when the device is fully charged.

d. Upgrading Firmware

Firmware will be upgraded automatically while charging 30K through checking the firmware

version and downloading the latest firmware available.

“Firmware upgrade status” LED will show blue light when upgrade finished and blink while

firmware is upgrading.

FCC Warning

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed

and operated with minimum distance between 20cm the radiator your body: Use only the

supplied antenna.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

IC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is

subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

Pour maintenir la conformité avec les lignes directrices de l’exposition RF de FCC, cet

équipement devrait être installé et exploité à une distance minimale de 20 cm le

radiateur de votre corps : utilisez seulement l’antenne fournie.

Manufacturer's Name: SENA TECHNOLOGIES.Inc

Product Name: WiFi Adapter

Trade Mark: SENA

Model number: SP126

Operating Temperature: -10°C to 40° C

This device is in compliance with the essential requirements and other relevant provisions

of Directive 2014/53/EU. All essential radio test suites have been carried out.

Detailed DOC file see attachment

The device complies with RF specifications when the device used at 20cm from your

body.

. The product shall only be connected to a USB interface of version USB2.0

Care for the environment! Must not be discarded with household waste!

RF Secification:

Function

Operation Frequency

Max RF

outputpower:

Limit

WIFI 802.11b/g/n(HT20)

802.11b/g/n(20MHz): 2412~2472MHz;

802.11b: 17.08dBm;

802.11g: 17.21dBm;

802.11n20: 16.49dBm;

20 dBm.

This product can be used across EU member states.

Sena SP126 Manuel utilisateur

Marque: Sena

Modèle: SP126

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Sena SP126 User manual

Sena SP126 Manuel utilisateur

Sena SP126 Manuel utilisateur

dans d''autres langues

Autres documents