King WiFiMax KWM1000 Installation And Operating Instructions Manual

Automatic Directional Wi-Fi Antenna

includes the KING

WiFiMax Router

KWM1000

KF1000 • White

KF1001 • Black

CONTENTS

OPERATION ....................................................................................... 1-20

INSTALLATION ................................................................................ 22-29

TROUBLESHOOTING ........................................................................... 30

SPECIFICATIONS ................................................................................. 31

LIMITED WARRANTY ........................................................................... 32

WIRELESS REGULATORY INFORMATION ......................................... 33

NOTE: Please read thru this manual before using or installing.

You will need to download the free KING Wi-Fi app to

use this product (see page 1).

Installation and Operating Instructions

Record your serial number.

Page 1

Do not power wash any part of the

KING Falcon antenna head or base mount.

Before using the KING Falcon, you must download the free KING Wi-Fi app

from the Apple

®

App Store

®

or Google Play

™

Store.

When in the store, search for “KING Wi-Fi.”

Make sure the power inserter and the KING WiFiMax router are connected

and plugged in as shown.

OPERATING NOTES

Do not operate the KING Falcon while the vehicle is in motion.

The KING Falcon will not locate Wi-Fi signals while the vehicle is in motion.

You must leave the power inserter and KING WiFiMax connected and plugged in while using your Wi-Fi.

Any time you move your vehicle, you will have to scan for a network again.

BEFORE USING YOUR KING FALCON ANTENNA

The KING Falcon is an outdoor, automatic directional 2.4GHz Wi-Fi antenna. Using

the KING Wi-Fi app, the KING Falcon automatically rotates and scans 360 degrees

and shows you all of the available networks. Simply tap the network you want and the

KING Falcon automatically aims itself to get the best performance from that network.

The KING WiFiMax Wi-Fi Router/Range Extender creates your own private and secure

Wi-Fi network, just like you have in your home. When you are in range of an available

network, simply congure your KING WiFiMax to connect to that network, and it then

extends the internet access from that network to your own private Wi-Fi network.

Thank you for choosing a KING Falcon antenna!

FIRST-TIME USE: Go to the next page and follow the rst-time use instructions.

IF YOU HAVE COMPLETED FIRST-TIME USE: Go to STANDARD OPERATION on

page 16.

Page 2

1. Go to your smart phone or tablet’s Wi-Fi settings page

and connect to the KING 5G network:

If you do not see KING_XXXXXX_5G (5GHz network), connect to KING_XXXXX (2.4GHz

network).

Always choose the 5G network if possible, as it is faster than the 2.4GHz network.

KING_XXXXXX_5G

Graphics will vary.

Back to Settings

WiFi

KC1074

ON

KING_XXXXXX_5G

KING_XXXXXX

Fun Lake Campground

Dad’s Campground

Chat Cafe

Campit Here

Choose a Network...

FIRST-TIME USE

1. SET UP KING WIFIMAX

NOTE: Make sure your KING WiFiMax and power injector are connected and powered on as

shown on page one (blue lights on both devices will turn on when power is connected).

XXXXXX is a number/letter combination

unique to your router and can be found on the

bottom of your router in the SSID row.

TIP

To maintain the best connection to your KING WiFiMax, it is

suggested that the cellular network on your smart phone or

tablet be turned off while completing the rst-time setup.

TIP

Page 3

Let’s Get Started

WiFiMax Setup

Antenna Pairing to Device

Scanning, Selecting, Locating Networks

Back

Continue

KC1

132

Please configure your WiFi

Max’s network name.

Cancel OK

Back

KC1121

4. Tap “OK” on the pop up screen.

2. Open the KING Wi-Fi app and tap “Get Started.”

Get Started

KC1131

3. Tap “Continue” to begin your

KING WiFiMax setup.

Page 4

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

KC1096

6. This screen should appear. Tap “WiFi Name & Password.”

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

Current Speed

KC1095

Upstream Router My Router

WiFi Extender

Online: 1

Repeating failed.

-- --

WAN IP Address

2.4 GHz: King_XXXXXX

5 GHz: King_XXXXXX_5G

Firmware Version

V15.03.05.16_multi

5. This screen should appear. Tap “WiFi Settings” in the left-hand column.

Use your phone or tablet's zoom functionality

to change the view of your screen.

TIP

Page 5

7. The screen below should appear. Here you MUST change your Wi-Fi name and password to

personalize it and keep it secure. Do steps A and B for both the 2.4 GHz and 5GHZ networks

(you will only have to do this once).

• Enter a new

Wi-Fi name.

• Enter a password.

When you have entered names and passwords for both networks, tap “Save.”

Tap the “X” to exit the KING WiFiMax setup screen.

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

Enter name here

2.4 GHz Network

WiFi Name: Hide

Encryption Mode:

WiFi Password:

WPA/WPA2-PSK

Enter password here

Enter name here_5G

5 GHz Network

WiFi Name: Hide

Encryption Mode:

WiFi Password:

WPA/WPA2-PSK

Enter password here

WiFi Name & Password

X

KC1097

You have personalized your router setup.

Continue on next page.

2.4G

5G

Write your network name here: Write your password here:

A

B

TIP

When entering your new names, make sure to completely erase the

existing names in the boxes.

Add “_5G” after your 5GHz network name to differentiate it from your

2.4GHz network name.

KING highly recommends password protecting your name. Choose

WPA/WPA2-PSK under “Encryption Mode” to enable password protection.

Passwords can be the same for both networks if you wish, and must be at

least 8 characters.

Choose this

encryption mode to

enable password

protection.

Page 6

2. Go to your smart phone or tablet’s Wi-Fi settings page

and connect to the Wi-Fi Network with your personalized

network name.

If your device cannot connect to your 5GHz network,

connect to your other network.

Example:

“MyWiFiName_5G”

This will be the name you

created in step 7, page 5.

Back to Settings

WiFi

KC1075

ON

MyWiFiName_5G

MyWiFiName

Fun Lake Campground

Dad’s Campground

Chat Cafe

Campit Here

Choose a Network...

Please connect this device

to your WiFiMax network.

OK

Back

KC1121

2. CONNECT TO THE KING WIFIMAX WITH YOUR

PERSONALIZED NETWORK NAME

1. Once you have congured your KING WiFiMax network names

in the previous step, this pop up will appear.

Do not click on “OK.” Instead, exit the app.

For best performance, choose the 5GHz

network whenever possible.

TIP

STOP STOP

Page 7

Please connect this device

to your WiFiMax network.

OK

Back

KC1121

Let’s Get Started

WiFiMax Setup

Antenna Paired

Scanning, Selecting, Locating Networks

Back

Continue

KC1122

3. Once you have connected, return to the app and

tap "OK" in the pop up window.

When the next screen appears, tap the “X” in the

upper left hand corner.

The KING WiFi app will conrm your KING WiFiMax

setup and that the connection was successful.

(Check mark turns green.)

4. To pair your antenna, tap "Continue"

and go to the next page.

Page 8

KC1120

Select Device

1234

If you have previously reset this device or if this is a

new device, enter 0000.

Continue

2 2

A B C

3

D E F

4

G H I

5

J K L

6

M N O

7

P Q R S

7

T U V

7

W X Y Z

0

KC1135

KC1134

KSA02541

Back

Tap below to pair you KING Falcon

3. PAIR YOUR KING FALCON ANTENNA

1. A list of available KING Falcon antennas to connect to will appear.

Identify your antenna and tap to select it.

Example only:

your number will be different.

TIP

If more than one antenna appears in the list:

Match the last 5 digits of the antenna number to the

serial number on the back of your KING Falcon to

ensure you are selecting the correct antenna.

2. Enter the default PIN number, "0000" and tap “Continue”

to pair your antenna.

You will be prompted to change your PIN - see next page.

KSA02541

Page 9

Let’s Get Started

WiFiMax Setup

Antenna Paired

Scanning, Selecting, Locating Networks

Back

Continue

KC1122

KC1120

Select Device

0000

If you have previously reset this device or if this is a

Continue

2 2

A B C

3

D E F

4

G H I

5

J K L

6

M N O

7

P Q R S

7

T U V

7

W X Y Z

0

KC1136

Reset PIN

Cancel Set

1234

Enter a new 4 digit numerical PIN

TIP

Only one smart phone or tablet can be paired with your KING Falcon antenna at a time.

In the event you need to switch control of the KING Falcon antenna to a different device,

and don’t have the PIN, a PIN reset may be required.

Being paired with the antenna allows the user to aim and select upstream networks.

You do NOT need to be paired to the KING Falcon to be connected to your personalized

KING WiFiMAX network.

To UN-pair from a KING Falcon antenna, choose a different Wi-Fi network from your

smart phone or tablet’s settings or shut off your smart phone or tablet’s Wi-Fi connectivity.

3. For increased security, you can change your PIN.

A second dialog box will allow you to do so.

If you do not wish to, tap “Cancel.”

Write your PIN here:

The app will conrm your KING Falcon antenna is

properly paired with your smart phone or tablet.

(Check mark turns green.)

4. To scan for and select available Wi-Fi networks,

tap "Continue” and go to the next page.

Page 10

Rescan

Available Networks

Fun Lake Campground

KC1138

Continue

Antenna Paired

Fun Lake Campground Found

4. LOCATE & CONNECT TO AVAILABLE WI-FI NETWORKS

TIP

“Upstream” network refers to any network you would like to connect to. This could be a

campground network, public Wi-Fi network, coffee shop, restaurant, hotel, etc.

Upstream networks may be password protected or accessible via captive portal.

Contact the ofce, front desk, service counter, etc. to obtain the password or captive

portal instructions at the location supplying the Wi-Fi.

1. The app will automatically begin to scan for available

upstream networks. Once the scan is complete, select the

upstream network that you would like to connect to.

2. The KING Falcon will locate your selected network

and conrm success.

3. Tap "Continue."

KC1137

Fun Lake Campground

Dad’s Campground

Chat Cafe

Campit Here

Joe’s Cafe

Inter-fun

Back

Filter - Select a Network

Select the Internet you would

like to use.

OK

Example: Fun Lake Campground

Do not select either of the 2.4GHz or 5GHz

network names you created on page 5.

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

Enter name here

2.4 GHz Network

WiFi Name: Hide

Encryption Mode:

WiFi Password:

WPA/WPA2-PSK

Enter password here

Enter name here_5G

5 GHz Network

WiFi Name: Hide

Encryption Mode:

WiFi Password:

WPA/WPA2-PSK

Enter password here

WiFi Name & Password

X

KC1097

Page 11

KingGuest

KC1140

To begin WiFi experience you must

configure your KING WiFiMax.

KING WiFiMax Setup is located in the

menu at the top left corner of the page.

Antenna Paired Network Found Setup KING

WiFiMax

ALMOST THERE! FINAL STEP REQUIRED!

Continue

Menu Tab

Rescan

KingGuest

About

Help

KING WiFiMax Setup

Forget Antenna

Rescan

Available Networks

KingGuest

KC1139

About

Help

KING WiFiMax Setup

Forget Antenna

5. CONNECT TO YOUR KING WIFIMAX

1. Almost there! Tap "Continue.”

2. Tap the menu icon to display

menu options.

3. Tap on "KING WiFiMax Setup."

Scan

No Network Connected

KC1141

Page 12

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

Current Speed

Upstream Router My Router

WiFi Extender

Online: 1

Repeating failed.

-- --

WAN IP Address

2.4 GHz: MyWiFiName

5 GHz: MyWiFiName_5G

Firmware Version

V15.03.05.16_multi

KC1098

4. This screen should appear. Tap “WiFi Settings” in the left-hand column.

5. This screen should appear. Tap “Wireless Repeating.”

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

KC1096

Page 13

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

Wireless Repeating

X

Repeating Mode:

Wireless Repeating:

Upstream WiFi Name:

WISP

--Select--

--Enter WiFi name manually--

Fun Lake Campground

Dad’s Campground

Chat Cafe

Campit Here

Joe’s Cafe

Inter-fun

Client+AP

--Select--

KC1099

7. After the scanning process is complete, this screen should appear.

Tap the “Upstream WiFi Name” drop down menu to display a list of available networks.

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

Wireless Repeating

X

Repeating Mode:

Wireless Repeating:

Upstream WiFi Name:Scanning...

WISP Client+AP

Save

KC1112

6. This screen should appear.

The router is scanning for networks.

If the upstream

network you are

looking for does not

appear in this list,

scroll up and down

within the box to

nd it.

TIP

Page 14

8. Select the same upstream network as the one you pointed the KING Falcon at (page 10, step 1).

Example:

9. Tap “Save.”

--Select--

--Enter WiFi name manually--

Fun Lake Campground

Dad’s Campground

Chat Cafe

Campit Here

Joe’s Cafe

Inter-fun

--Select--

KC1113

KC1120

Fun Lake Campground

Dad’s Campground

Chat Cafe

Campit Here

Joe’s Cafe

Inter-fun

Back

Filter - Select a Network

This popup should appear. Tap “OK.”

Repeating Mode:

Wireless Repeating:

Upstream WiFi Name:

**********

KING Falcon 2

Upstream WiFi Password:

WISP Client+AP

Save

The router must reboot to activate your setting. Do

you want to reboot the router?

Cancel OK

KC1114

10. Your KING WiFiMax will reboot.

If your router gets stuck at 100% and won’t nish rebooting,

or if your Wi-Fi device does not have internet access, you may need to go back to your smart

phone or tablet’s settings page and ensure that it reconnected to the Wi-Fi network with

your personalized network name (page 5), as you may lose connection during the router’s

rebooting process.

Your KING WiFiMax is now

extending your network!

Page 10, Step 1

Rebooting... Please wait 100%

KC1113

KC1130

TIP

Your upstream network

may require a password

(screen not shown).

TIP

You may have

to zoom out or

scroll down to

see the progress.

If you turned off your cellular network during this

rst-time setup, it is now safe to turn it back on.

TIP

Page 15

This page intentionally left blank.

Page 16

STANDARD OPERATION

1. Go to your smart phone or tablet’s settings page and

connect to the Wi-Fi Network with your personalized

network name.

If your smart phone or tablet cannot connect to your

5GHz network, connect to your other network.

Example:

“MyWiFiName_5G”

This will be the name

you created on page 5.

Back to Settings

WiFi

KC1075

ON

MyWiFiName_5G

MyWiFiName

Fun Lake Campground

Dad’s Campground

Chat Cafe

Campit Here

Choose a Network...

Rescan

Available Networks

KingGuest

KC1119

2. Open the KING Wi-Fi app and follow the instructions to either:

Start a rescan with the KING Falcon

(for example you have moved and wish to

scan for new networks)

choose a list of previously scanned networks

(for example your current choice of networks is currently

unavailable and you wish to switch to an alternate one).

OR

TIP

The “Available Network” button will not appear if:

Smart phone or tablet loses power.

KING Falcon antenna loses power.

Connection between KING Falcon and smart phone or tablet is

lost.

App is closed.

To maintain the best connection to your KING WiFiMax, it is

suggested that the cellular network on your smart phone or

tablet be turned off while using standard operation.

TIP

Page 17

5. This screen should appear. Tap “WiFi Settings” in the left-hand column.

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

Current Speed

KC1095

Upstream Router My Router

WiFi Extender

Online: 1

Repeating failed.

-- --

WAN IP Address

2.4 GHz: King_XXXXXX

5 GHz: King_XXXXXX_5G

Firmware Version

V15.03.05.16_multi

4. Follow the app instructions to locate the “KING WiFiMax Setup” screen (see page 11 if you don’t

remember how to do this).

Tap on “KING WiFiMax Setup.”

3. Choose a network from the list generated by step 2.

Example: Fun Lake Campground

KC1120

Fun Lake Campground

Dad’s Campground

Chat Cafe

Campit Here

Joe’s Cafe

Inter-fun

Back

Filter - Select a Network

Do not select either of the 2.4GHz or 5GHz

network names you created on page 5.

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

Enter name here

2.4 GHz Network

WiFi Name: Hide

Encryption Mode:

WiFi Password:

WPA/WPA2-PSK

Enter password here

Enter name here_5G

5 GHz Network

WiFi Name: Hide

Encryption Mode:

WiFi Password:

WPA/WPA2-PSK

Enter password here

WiFi Name & Password

X

KC1097

Page 18

6. This screen should appear. Tap “Wireless Repeating.”

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

KC1096

Internet Status

Internet Settings

WiFi Settings

Parental Control

VPN

Advanced Settings

System Settings

English Exit

WiFi Settings

WiFi Name & Password

Enable Enable Channel/Bandwidth 2.4 GHz High/5 GHz High

AutoDisableEnable

Beamforming+

Wireless Repeating

AP Mode

Channel & Bandwidth

Anti-interference

Transmit Power

Wireless Repeating

X

Repeating Mode:

Wireless Repeating:

Upstream WiFi Name:

Select your network

Fun Lake Campground

Upstream WiFi Password:

WISP Client+AP

Save

KC1115

7. This screen should appear. Tap the blue arrows to scan for networks.

La page charge ...

King WiFiMax KWM1000 Installation And Operating Instructions Manual

Ce manuel convient également à

King WiFiMax KWM1000 Installation And Operating Instructions Manual

dans d''autres langues

Documents connexes

Autres documents