TaoTronics TT-HE002 Le manuel du propriétaire

Marque: TaoTronics

Modèle: TT-HE002

Taper: Le manuel du propriétaire

描图

借（通）

用件登记

描校

旧底图

总号

底图

总号

签字

日期

广东世联电器有限公司

共张

第张

设计

批准

审核

包装件图纸

版次：A/0

9850100110

HP-K3899-23

2023美国NO BRAND

HPQ15J-E2 WIFI

NB-HE002 8100200035

说明书

颜色：黑色印刷

材质：封面128g铜版纸，内页80g双胶纸

成品尺寸： 160mm*110mm

材质和油墨必须符合环保要求

NB-HE002

Smart Space Heater

[email protected]

Manufacturer: Shenzhen Aspiron Technology Company Limited

Address: 3rd Floor, Yiben Building, No.1063 Chaguang Road,

Xili Street, Nanshan District, Shenzhen, Guangdong, China

FCC ID: 2A94QNB-HE002

Pairing Your Smart Heater with App

APP Troubleshooting

FCC Statement

FCC Radio Frequency Exposure Statement

Smart Space Heater

Pairing Your Smart Heater

with App

1. Confirm that the mobile phone has been successfully connected to 2.4G

Wi-Fi, and Bluetooth has been turned on.

2. Scan the QR code or search for “CozyLife” in the APP Store (iOS version)

or Google Play (Android version), download and install the “Cozylife” APP.

Open the APP, register and log in to the APP;

Note

If you don't want to register an account, you can also use the APP by

clicking "Experience Now" in the upper right corner of the APP.

If you want to share the device so that other phones can control the unit

at the same time , scan the code in the sharing function of settgs.

3. Plug the device into the socket with a proper voltage;

4. Press and hold the "M" and "OSC" buttons for 3 seconds at the same

time, and the device will enter the automatic network configuration state;

5. Click “+” in the upper right corner of the “CozyLife” APP, click the “Add”

button, enter the “Wi-Fi account name" and "Wi-Fi password", and click

"OK";

6. Enter the add device page, and the APP will automatically start adding the

device. After the addition is successful, "√" will be displayed on the APP.

Click the "Finish" button in the upper right corner;

Please make sure your Wi-Fi device network connection is normal,

and that you are using a 2.4GHz network. The APP only supports

2.4GHz Wi-Fi network.

Please make sure that the mobile phone and the device must be

connected to the same Wi-Fi.

Make sure the Bluetooth on your smartphone is turned on and close to

the device during the connection process.

Please make sure that the Wi-Fi account or password has been

entered correctly.

Please make sure to complete the Wi-Fi connection within 3 minutes.

If 3 minutes expire, please start over the connection process.

Note:

7 8

APP Troubleshooting

1.Cannot connect to App.

● Make sure the Bluetooth of your smartphone is enabled.

● Enable the smartphone’s Location Services.

● Try connecting with another smartphone.

● Make sure your app is updated to the latest version.

● Make sure you have connected to the 2.4GHz network, and confirm the

network is working correctly.

● Make sure the Wi-Fi password you entered is correct.

● Shorten the distance between the device, Wi-Fi router, and the

smartphone.

● Make sure your device and the Wi-Fi router are not placed near.

appliances that produce electromagnetic radiation (e.g. microwave ovens,

refrigerators, etc.).

● If you are using a VPN, try turning it off and then connecting the device.

Disable portal authentication for your Wi-Fi network. If portal authentication

is enabled, this device will not be able to access your Wi-Fi network, and

setup will fail. Portal authentication means that you need to sign in to your

Wi-Fi network through a web page before you can use the Internet.

2.The device is offline.

● Make sure your router is connected to the internet, and your phone’s

network connection is working.

● If the Wi-Fi password has changed, the device will automatically go

offline. Try connecting it to the network again.

● Delete the offline device from the App, then add and reconfigure the

device again in the app.

Note

● Please make sure your Wi-Fi device network connection is normal, and

that you are using a 2.4GHz network. The APP only supports 2.4GHz

Wi-Fi network.

● Please make sure that the mobile phone and the device must be

connected to the same Wi-Fi.

● Make sure the Bluetooth on your smartphone is turned on and close to

the device during the connection process.

● Please make sure that the Wi-Fi account or password has been entered

correctly.

● Please make sure to complete the Wi-Fi connection within 3 minutes. If 3

minutes expire, please start over the connection process.

FCC STATEMENT :

FCC Radiation Exposure Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interfer-

ence that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

23 24

This device contains licence-exempt transmitter(s)/receiver(s) that comply

with Innovation, Science and Economic Development Canada’s licence-ex-

empt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that

may cause undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil

est conforme aux CNR d’Innovation, Sciences et Développement

économique Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

(1) L' appareil ne doit pas produire de brouillage;

(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d' en compromettre le fonctionnement.

Radio Frequency Exposure Statement for IC

The device has been evaluated to meet general RF exposure requirements.

The device can be used in mobile exposure conditions. The min separation

distance is 20cm.

Déclaration d'exposition aux radiofréquences pour IC

L’appareil a été utilisé pour répondre aux exigences générales en matière

d’exposition aux radiofréquences.

TaoTronics TT-HE002 Le manuel du propriétaire

Marque: TaoTronics

Modèle: TT-HE002

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: TaoTronics TT-HE002 Owner's manual

TaoTronics TT-HE002 Le manuel du propriétaire

TaoTronics TT-HE002 Le manuel du propriétaire

dans d''autres langues

Autres documents