Lenco Xemio-668 Black Le manuel du propriétaire

1

Xemio-668 / MP-108

User manual – MP3 player with 8GB micro SD card

Gebruikshandleiding – MP3-speler met 8GB microSD-kaart

Bedienungsanleitung – MP3-Player mit 8 GB microSD-Speicherkarte

Mode d’emploi – Lecteur MP3 avec carte micro SD de 8 Go

Manual de usuario – reproductor de MP3 con tarjeta micro SD de 8 GB

2

Index

English ................................................................................................... 3

Nederlands .......................................................................................... 26

Deutsch ............................................................................................... 52

Français ............................................................................................... 77

Español .............................................................................................. 102

3

English

Xemio-668/MP-108

CAUTION:

Usage of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device

on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves,

candles and other heat-generating products or naked flame. The

apparatus can only be used in moderate climates. Extremely cold or

warm environments should be avoided. Working temperature between

0° and 35° C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so,

simply reset and restart the device following the instruction manual.

During file transmission, please handle with care and operate in a

static-free environment.

6. Warning! Never insert an object into the product through the vents or

openings. High voltage flows through the product and inserting an object

can cause electric shock and/or short circuit internal parts. For the same

reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or

near swimming pools.

8. The apparatus shall not be exposed to dripping or splashing and make

sure that no objects filled with liquids, such as vases, are placed on or

near the apparatus.

9. Do not use this device when condensation may occur. When the unit is

used in a warm wet room with damp, water droplets or condensation

may occur inside the unit and the unit could maybe not work properly;

let the unit stand in power OFF for 1 or 2 hours before turning on the

power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked

several times before leaving the factory, it is still possible that problems

may occur, as with all electrical appliances. If you notice smoke, an

excessive build-up of heat or any other unexpected phenomena, you

should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the

specification label. If you are not sure of the type of power supply used in

your home, consult your dealer or local power company.

12. Keep away from rodents. Rodents enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol

based fluids. To remove severe stains, you may use a damp cloth with

dilute detergent.

4

14. The supplier is not responsible for damage or lost data caused by

malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or

transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the usb memory stick should be

plugged into the unit directly. Don’t use an usb extension cable because it

can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the

apparatus.

18. This device is not intended for use by people (including children) with

physical, sensory or mental disabilities, or a lack of experience and

knowledge, unless they’re under supervision or have received

instructions about the correct use of the device by the person who is

responsible for their safety.

19. This product is intended for non professional use only and not for

commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by

using this product in an unstable position vibrations or shocks or by

failure to follow any other warning or precaution contained within this

user manual will not be covered by warranty.

21. Never remove the casing of this apparatus.

22. Never place this apparatus on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as the power

supply cord or the plug, when liquid has been spilled or objects have

fallen into the apparatus, when the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

26. Prolonged exposure to loud sounds from personal music players may lead

to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor :

 If any trouble occur, disconnect the AC power card and refer servicing

to qualified personnel.

 To completely disconnect the power input, the mains plug of the

apparatus shall be disconnected from the mains, as the disconnect

device is the mains plug of apparatus.

 Don’t step on or pinch the power adaptor. Be very careful,

particularly near the plugs and the cable’s exit point. Do not place

heavy items on the power adaptor, which may damage it. Keep the

entire device out of children’s reach! When playing with the power

cable, they can seriously injure themselves.

 Unplug this device during lightning storms or when unused for a long

period.

 The socket outlet must be installed near the equipment and must be

easily accessible.

5

 Do not overload ac outlets or extension cords. Overloading can cause

fire or electric shock.

 Devices with class 1 construction should be connected to a main

socket outlet with a protective earthed connection.

 Devices with class 2 construction do not require a earthed connection.

 Always hold the plug when pulling it out of the main supply socket. Do

not pull the power cord. This can cause a short circuit.

 Do not use a damaged power cord or plug or a loose outlet. Doing so

may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing

coin / cell batteries:

Warning:

 “Do not ingest battery, Chemical Burn Hazard” or equivalent working.

 [The remote control supplied with] This product contains a coin /

button cell battery is swallowed, it can cause severe internal burns in

just 2 hours and can lead to death.

 Keep new and used batteries away from children.

 If the battery compartment does not close securely, stop using the

product and keep it away from children.

 If you think batteries might have been swallowed or placed inside any

part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:

 Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type.

 Battery cannot be subjected to high or low extreme temperatures,

low air pressure at high altitude during use, storage or transportation.

 Replacement of a battery with an incorrect type that can result in an

explosion or the leakage of flammable liquid or gas.

 Disposal of a battery into fire or a hot oven, or mechanically crushing

or cutting of a battery, that can result in an explosion.

 Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or that leakage of

flammable liquid or gas.

 A battery subjected to extremely low air pressure that may result in

an explosion or the leakage of flammable liquid or gas.

 Attention should be drawn to the environmental aspects of battery

disposal.

INSTALLATION

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage

and before all other connections have been made.

6

WARNING:

 When participating in the traffic listening to a personal

music player can make the listener less aware of potential

dangers such as approaching cars..

WARNING:

 To prevent possible hearing damage, do not listen at high

volume levels for long periods.

7

1. Get to know the controls on Player

Item

Description

1

TFT LCD Display

2

Button (ON / OFF, Play / Pause, Select / Enter)

3

Button (Previous / Fast-Rewind, Item up)

4

Button (Next / Fast-Forward, item down)

5

M Button (Call Menu / Submenu)

6

Button (Exit; Back to Previous Menu / Main Menu)

7

Micro USB Port (PC Connection / Charge)

8

Microphone Position (inside Micro USB port)

9

Micro SD Memory Card Slot

10

Earphone Output Jack (3.5mm Stereo)

11

Button (Volume Down)

12

Button (Volume Up)

2. Insert Micro SD Memory Card

This device is design without an internal memory; before you use it,

please must insert a Micro SD memory card into player.

 Turn “Off” the play, then plug in the Micro SD memory card into player

card slot;

 Now you can use the player for upload / download the desired media

files with your PC computer.

 Or, Upload the desired media files direct to the Micro SD memory card

with your computer before insert it into player.

 However, “Card error / no card” will display if Micro SD card is not in

place or not in proper position when you want to enter into related

menu.

Note: Make sure the player power is in “Off” status when insert / remove the

Micro SD memory card from memory card slot. Otherwise, the player

functional may result dead halt or the internal data / files will be lost or

damaged.

8

3. About Player Battery

Player has an internal, non–user-replaceable battery. For best results,

the first time you use player, let it charge for about 2 ~ 3 hours or until the

battery status icon in the “Connect” screen shows that the battery is in full.

Battery is in full

Note: Player may continue use battery power after it’s been turned off. For

maintain the battery life and performance, if unit isn’t used for a while, the

battery need to be recharged, recharging the battery at least once per

month.

Warning:

Better use the original USB cable delivered with your MP3 player. This cable

is a data and charging cable. Some other USB cables in the market are

charging only cables. If you use a charging only cable to transfer data from

your computer to your player, it will only show the battery symbol on the

screen and will not be detected by your computer as an external drive; this

means that you cannot transfer any files from your computer to your MP3

player.

Note :

The player contains a built-in temperature monitor sensor. If it senses that

the battery pack temperature is not in good condition it will control and stop

the charging function. The charging function will be automatically restored

when the detected battery pack temperature returns to within normal limits.

a. Charging the Battery:

You can charge the player battery in two ways:

 Connect player to your computer. Or,

 Use the USB power charger. (not included)

b. Connection and Charging:

 Once you have connected player with computer / power charger, then

you will see the “Connect” screen appear on screen,

 The level bars are running in battery status icon at the “Connect” screen.

The battery is in charging.

“Connect” Screen

9

In Charging

Important: The battery does not charge when your computer is in sleep. The

USB port on most keyboards does not provide enough power to charge the

player. Connect player to a USB port on your computer only to prevent

charge problem.

4. Connecting and Disconnecting Player

You can connect the player with your computer to transfer those media

files and recorded voice memos when necessary, and to charge the battery.

a. To Connecting Player

 To connect player to your computer, plug the connector of USB Cable into

a USB port on your computer, and connect the other end to player, then

the “Connect” screen appear for view.

 Now the player is ready for media files transfer with your computer and

the battery is charging.

 You can transfer the media files by using the computer mouse use drag

and place, or copy and paste, in between the player and your computer.

Disconnect it when you’re done.

b. To Disconnecting Player

It’s important not to disconnect player while it’s syncing or transferring

files. Eject the player before disconnect it.

 To eject player, press and hold M button for about 2 seconds, the

“Connect” screen will switch to “Main Menu” screen. And now is safe to

disconnect the player with your computer. Unplug the USB cable from

the player. Or,

 If you’re using a Windows PC, you can also eject player in My Computer

or by clicking the “Safely Remove Hardware” icon in the Windows

system tray, select the correspondence name of USB Device and choose

“Stop” or “Eject” follow by the pop up windows you’re your computer.

 If you’re using a Mac, you can also eject player by dragging the player

icon on the desktop to the Trash.

 Disconnect the USB cable from the player and computer, simply remove

it.

 If you accidentally disconnect player without ejecting it, reconnect it to

your computer and sync again. However, some media file may loss.

5. Getting Start the Player

10

Turn ON / OFF the player and use of Main Menu.

 Press and hold the button for 3 seconds to turn ON, then you will see

any one of the following shown Main Menu screen, Music / Movie /

Record / Voice / Photo / Setup / eBook / Game, will appear on LCD after

the Loading and Opening screen have displayed.

To OFF the player, press and hold the button for 3 seconds.

“Main Menu” screens

6. Use Setup Menu

You might need to set date & time or change some default setting as you

desired in setup sub menu before you start to use the player.

 To go into setup menu, from main menu, choose “Setup” by use /

button and then press button, a “Setting” menu appears to use.

 You can go back to previous menu by press the button during in

setup menu. Or, press and hold the button to return to main menu.

Setup Menu

(Menu Page 1) (Menu Page 2)

a. To Setup “System time” (Date & Time):

 Choose “System time” by using / button and then press

button, a date & time setting screen appears to use.

 Press “ ” button, the year is highlighted then adjusting to current year by

pressing the / button. And repeating the adjusting methods by

“ / ” and / button again for finished those items; Month,

11

Date, Hour, Minute and seconds setting adjustment.

 Finally, you need to press the button to confirm the adjustment and

back to Setup menu, if not the date & time will not to memorize and you

need to adjust them again.

Note: the set date & time will be losses if internal rechargeable battery is

fully emptied in protection mode. Adjust the clock again if you want it to use.

b. To change “LCD set”

You can set the backlight to illuminate the screen for a certain amount of

time as you desired or make the backlight to always ON when every time

you turn ON the player.

 To change LCD backlight, choose “LCD set” > choose “Dark mode”, a

level bar with number appear then chose “0 (always On) / 5 / 10 / 15 / 20

/ 25 / 30 / 35 / 40 / 45 / 50 seconds” as you desired by using and

/ buttons. Choose “0” to prevent the LCD backlight from turning to

off. (choosing this option decrease battery performance)

c. To Change “Language”

This player can use difference OSD languages.

 To set the language, choose “Language”, and then choose which

language as you desired by using and / buttons.

d. To Set “Power Off”

The Power Off setting can extend the time between battery charges by

turning OFF the player when you are not using the controls or no operation.

Also, Sleep function provided for more choice.

 To set power off time, choose “Power off”, then choose “Off time”, a

levels bar with number menu appear, then choose “0 - 200 seconds” as

you want by using and / buttons.

 To set sleep time, choose “Power off”, then choose “Sleep time”, a levels

bar with number menu appear, choose “0 / 10 / 20 /30 / 40 / 50 / 60 / 70

/ 80 / 90 / 100 / 110 / 120 minutes” as you want by using and /

buttons.

e. To View “Memory info”

You can view about the memory status of Micro SD card, such as the

numbers of remaining memory space available and the percentage of

memory have used.

 To view the status, choose “Memory info” by using and /

buttons. An information screen, remaining memory space available and

percentage of memory used, appear for view.

 To return to setup menu or main menu press button or press and

hold button.

f. To View “Firmware Version”

You might need to view the details about firmware information inside the

Player.

 Choose “Firmware version” by using and / buttons, an

information screen appear for view.

 To return to setup menu or main menu, press button or press and

hold button.

12

g. To “Exit”

 Select Exit to back to main menu. Or, press and hold the button to go

back main menu.

7. Use Music Menu

You can use music player to playback with supported music file format of

audio coding; WMA and MP3 are supported by the player. To open the music

player in Main Menu:

 From main menu, choose “Music” by using / and button, a

“Music Now Playing” screen appears to use.

“Music Now Playing” Screen

a. To Play / Pause Music

 In Music Now Playing screen, press button to start the play.

 Press button to pause the playing music.

 Press it again to resume.

b. Play Previous or Next Music

 Press button to play next music.

 Press button to play previous music.

c. Use Fast-Forward or Fast-Backward

 Press and hold button to use fast-forward

 Press and hold button to use fast-backward.

d. Adjust volume level

 In music playing, press / buttons to adjust volume levels to Up /

Down.

 Wait for 6 – 8 seconds or press button to return to music now playing

screen.

For hearing protection; A display warning pop-up on TFT screen, when every

time you increase the volume level and reach to the default setting level

which may exceed 85db. Press M button to accept the warning and press

Button to increase the volume level.

e. Use Lyric Display

This player supports “*.LRC” lyric files and lyrics can synchronous

displayed while playing music if you music has lyric included. How to know

whether the lyrics exist? If the current song has matching lyric files, the color

dot beside the Lyric Message icon will be turned to green color from

red in Music Now Playing screen.

 Make sure the music file name and “*.LRC” file name must be same and

upload into player together.

 Playing the music with lyrics, and then press and hold M button to enter

13

the lyric display mode and the lyrics is displaying and moving up

accordingly with the playing music.

 Press M button to cancel the lyrics display and go back to Music Now Play

screen if you want.

8. Use Music Submenu in Music Stop Mode

You might need to selecting folders for music play and delete music files.

To do this:

 In Music Now Playing screen, press the button to stop the playing

music if player is in playing. Then,

 Press the M button to pop-up the Music Submenu;

a. Card Folder

 In Music Submenu screen, choose “Card folder” a list menu appear, and

then select folder and / or choose a music file by using / and

button.

 It will go back to music now playing screen once a music file is selected.

Then press button to play.

b. Artists

 Choose “Artists” to enter folder(s) list menu grouping by Artist name,

then choose who name of Artist folder > choose a song file in list where

start the play.

c. Album

 Choose “Album” to enter folder(s) list menu grouping by Album name,

then choose who name of Album folder > choose a song file in list where

start the play.

d. Genre

 Choose “Genre” to enter folder(s) list menu grouping by Genres name,

then choose who name of Genres folder > choose a song file in list where

start the play.

e. Update playlist

 Choose “Update playlist” to update the playlist when you found it show

incorrect; actually, it is normal due to some media files could be manual

deleted in Micro SD card by user in some case. However, update the

playlist when necessary.

f. Delete file

 Choose “Delete file” a list menu appear, and then choose which music

file that you want to delete by using / and buttons.

 Once file is selected, press button and choose Yes to confirm or No to

cancel.

g. Delete All

 Choose “Delete all”, a dialog appear to choose, then selects “Yes / No” by

using the / and buttons.

 Choose Yes to confirm or No to cancel and press the button to

confirm.

 All music files will be deleted once YES is selected and confirmed, a

“Deleting” screen appear for a while and deleting process is in progress,

14

then “Empty disk!” message will shown on screen for few seconds.

h. Exit

 Select Exit to back to music now playing screen.

9. Use Music Submenu in Music Playing Mode

You might need to do some changes for music playing, such as repeat, EQ

settings for music files… etc. To change setting:

a. To Set Repeat

 In music playing mode, press M button, a Music Submenu appear；

 Choose “Repeat”, then choose “Normal / Repeat one / Repeat All /

Repeat folder / Random All / Random Folder” as you desired by using

/ and buttons.

b. To Change Equalizer

 Choose “Equalizer”, then choose “Natural / Rock / Pop / Classic / Soft /

Jazz / DBB” as you desired.

c. Exit

 Select Exit to back to music now playing screen.

10. Use Movie Menu

a. To Play Movie

 From Main Menu, choose “Movie” by using / and button, a

“Movie Now Playing” screen appears to use.

 In “Movie Now Playing” screen, press key to start the play.

 Press button to pause and to back to Movie Now Playing screen.

Press it again, the video will play continue.

b. To Play Previous or Next Video

 Press button to play next movie file.

 Press button to play previous movie file.

c. Use Fast-Forward or Fast-Backward

 Press and hold button to play fast-forward.

 Press and hold button to play fast-backward.

d. Adjust Volume Level

 In movie playing, press / buttons to adjust volume levels to Up /

Down.

For hearing protection; warning will pop up at the display, when every time

you increase the volume level and reach to the default setting level which

may exceed 85dB. Press M button to accept the warning and press button

to increase the volume level.

11. Use Movie Submenu

You might need to selecting folders, delete movie files and set repeat for

movie play. You can make change during in the playing mode at Movie Now

playing screen, To do this:

 In “Movie Now Playing” screen, press M button to enter to movie

submenu.

a. Card Folder

 In movie submenu screen, choose “Card Folder”, a file list menu appear,

15

and then select folder and / or choose a desired movie file to play by

using / and button.

 It will go back to movie now playing screen once a movie file is selected.

Then press button to play.

b. Delete File

 In movie submenu screen, choose “Delete file” a file list menu appear,

and then choose which movie file that you want to delete by using /

buttons.

 Once file is selected, press button and choose “Yes” to confirm or

“No” to cancel.

c. Delete All

 In movie submenu screen, choose “Delete all” then selects “Yes / No” by

using / button.

 One “YES” or “NO” appear then press button to confirm.

 All movie files will be deleted once YES is selected and confirmed, a

“Deleting” screen appear for a while and deleting process is in progress,

then “Empty disk!” message will shown on screen for few seconds.

d. Repeat

 In movie submenu, choose “Repeat”, then choose “Normal / Repeat one

/ Repeat all / Repeat folder / Random all / Random folder” as you

desired by using / and buttons.

e. Exit

 Select Exit to back to music now playing screen.

12. Convert Video files into AMV/AVI

This tool can be used to transform those video files into AMV/AVI files on

the computer before upload them to your player.

 To install this video convert tool to your computer, open a folder named

“UTILITIES > Video Conversion Software” which stored in a provided

Micro SD card. (Download it onto your computer for copy and

installation)

 Select “Setup” to start the install program, the software will

automatically install to your computer.

 After installation is done, open folder “Media Player Utilities” > click

program “AMV&AVI Video converter” in All Program bar on your

window PC. The program interface as shown below:

16

Noted: This program is used to convert video files into AMV/AVI format,

currently only AMV/AVI format is supported by this player.

 Then click to choose the folder where to save the AMV/AVI files, and

then click to select the folder where the original files are. The

original file will show in the file window once selected.

 Move the mouse arrow and left click mouse on the unconverted source

files to select with highlight in the file window, then the icon will be

highlighted into icon. Now click this icon and a dialog box will be

shown.

17

 Now click this icon and a dialog box will be shown.

 Make sure Video type is “AMV” or “AVI”, Screen width and height is

“160x120” selected. Video convert and Image quality should be

“Normal” and “High” as defaulted. Click “OK” to confirm the setting.

 Now click to start converting.

 After conversion, the AMV/AVI files will play automatically for preview.

 And now, the converted AMV/AVI file is ready to transfer, you can simply

copy and place those converted AMV/AVI files to the media player.

Note: Only pixels in 160x120 or 320x240 can be supported by this player.

13. Use Record Menu

You can use the player as a Voice Recorder and recording voice memos

using the built-in microphone.

a. To Start Recording Voice Memo

 From main menu, choose “Record” by using / and buttons,

a “Now Recording” screen appear to use.

18

“Now Recording” Screen

b. To Start / Pause Recording

 Press button to start the recording and the recording time is running.

 Press button to pause the recording and recording time will stop and

flashing. Press it again the recording and time will run continue.

c. To Save and Stop Recording File

 Press or press and hold button, the recorded file will save into

Micro SD memory card and ready for next recording.

 Press and hold button, the recorded file will save into Micro SD

memory card and to exit.

14. Use Record Submenu (in Stop Mode)

You might need to change the folder locations which want to store the

record file and / or change record quality to better compression values.

 In Now Recording screen at stop mode, press M button, a “Record

Submenu” appear to use.

a. Card folder

 In record submenu, choose “Card folder” and then choose the folder

name which you want to save the record file by using / and

buttons.

 Once folder name selected, press and hold the M button, then the folder

location is changed and go back to Now Recording screen.

 And now you can see the folder name is changed at the Record Folder

icon in “Now Recording” screen.

b. Record Type

 In record submenu, choose “REC type”, then choose “32K BPS / 64K BPS /

128K BPS / 256K BPS” values as you desired by using / and

buttons.

c. Exit

 Select Exit to back to music now recording screen.

15. Use Voice Menu

For playback and manage the recorded voice memos file.

 From main menu, choose “Voice” menu by using / and

buttons, a “Voice Now Playing” screen appear to use.

19

“Voice Now Playing” Screen

a. To Play and Pause Recorded Voice Memos

 In Voice Now Playing screen, press button to start to play the

recorded file.

 Press button to pause the playing file.

b. To Play Previous or Next File

 Press button to play next file.

 Press button to play previous file.

c. To Fast-Forward or Fast-Backward

Press and hold buttons to use fast-forward

Press and hold button to use fast-backward.

d. Adjust volume level

 In music playing , press / button, a change volume control screen

appears, then press / buttons to adjust volume levels to up /

down.

 Wait for 6 – 8 seconds or press button to return to music now playing

screen.

For hearing protection; warning will pop up at the display, when every time

you increase the volume level and reach to the default setting level which

may exceed 85dB. Press M button to accept the warning and press button

to increase the volume level.

16. Use Voice Submenu in Stop Mode

You might need to change some setting as you desired, in Voice Now Playing

screen, press button to pause / stop the playing file, if in playing mode,

then press M button to call up the voice submenu.

a. Card Folder

 In Voice submenu screen, choose “Card folder” a list menu appear, and

then select folder and / or choose a voice file by using / and

button.

 It will go back to voice now playing screen once a record file is selected.

Then press button to play.

b. Delete File

 In voice submenu screen, choose “Delete file” a list menu appear, and

then choose which voice file that you want to delete by using /

and buttons.

 Once file is selected, press button and choose Yes to confirm or No to

20

cancel.

c. Delete All

 In voice submenu screen, choose “Delete all” then selects “Yes / No” by

using / button.

 One “YES” or “NO” appear then press button to confirm.

 All Recorded files will be deleted once YES is selected and confirmed, a

“Deleting” screen appear for a while and deleting process is in progress,

then “Empty disk!” message will shown on screen for few seconds.

d. Exit

 Select Exit to back to voice now playing screen.

17. Use Voice Submenu in Playing Mode

You might need to do some changes for voice playing, such as repeat for

recorded files… etc. To change setting:

a. Repeat

 In voice playing mode, press M button, a Voice Submenu appear, then

choose “Repeat”, then choose “Normal / Repeat one / Repeat all / Repeat

folder / Random all / Random folder” as you desired by using /

and buttons.

b. Exit

 Select Exit to back to voice now playing screen.

Note: Press and hold the button will go back to Main Menu directly.

18. Use Photo Browse

You can use the player as a picture / photo viewer:

 To browse picture / photo file, from main menu choose “Photo” by using

/ and button, a list menu appear to use.

 Choose a file by using / button, and then press button to

play.

 Press button to stop and to go back to list menu for other files

selection.

 To change previous / next photo, press / button.

 Press and hold button to back to main menu.

19. Use Photo Submenu in List Screen

You might need to change some setting for photo browse. To change

setting:

a. Card Folder

 In list menu, press M button to call up the photo submenu.

 In photo submenu, choose “Card folder” a list menu appear, and then

choose folder and file to browse by using / and M button.

 Once photo file is selected, press button to play.

b. Playback Set

 In photo submenu, choose “Playback set” and then choose “Manual

play”. However, you need to use / button to browse next /

La page charge ...

Lenco Xemio-668 Black Le manuel du propriétaire

Ce manuel convient également à

Lenco Xemio-668 Black Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents