Lenco XEMIO-768 Pink Le manuel du propriétaire

1

USER’S MANUAL

Xemio-768/ MP-208

MP3 / MP4 player with Bluetooth

For more information: www.lenco.com

2

Index

English ....................................................................................................................................................................................... 3

Nederlands .............................................................................................................................................................................. 28

Deutsch ................................................................................................................................................................................... 60

Français ................................................................................................................................................................................... 92

Español .................................................................................................................................................................................. 121

3

English

CAUTION:

Usage of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device

on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves,

candles and other heat-generating products or naked flame. The

apparatus can only be used in moderate climates. Extremely cold or

warm environments should be avoided. Working temperature between

0° and 35° C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so,

simply reset and restart the device following the instruction manual.

During file transmission, please handle with care and operate in a

static-free environment.

6. Warning! Never insert an object into the product through the vents or

openings. High voltage flows through the product and inserting an object

can cause electric shock and/or short circuit internal parts. For the same

reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or

near swimming pools.

8. The apparatus shall not be exposed to dripping or splashing and make

sure that no objects filled with liquids, such as vases, are placed on or

near the apparatus.

9. Do not use this device when condensation may occur. When the unit is

used in a warm wet room with damp, water droplets or condensation

may occur inside the unit and the unit could maybe not work properly;

let the unit stand in power OFF for 1 or 2 hours before turning on the

power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked

several times before leaving the factory, it is still possible that problems

may occur, as with all electrical appliances. If you notice smoke, an

excessive build-up of heat or any other unexpected phenomena, you

should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the

specification label. If you are not sure of the type of power supply used in

your home, consult your dealer or local power company.

12. Keep away from rodents. Rodents enjoy biting on power cords.

4

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol

based fluids. To remove severe stains, you may use a damp cloth with

dilute detergent.

14. The supplier is not responsible for damage or lost data caused by

malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or

transferring files. Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the usb memory stick should be

plugged into the unit directly. Don’t use an usb extension cable because it

can cause interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the

apparatus.

18. This device is not intended for use by people (including children) with

physical, sensory or mental disabilities, or a lack of experience and

knowledge, unless they’re under supervision or have received

instructions about the correct use of the device by the person who is

responsible for their safety.

19. This product is intended for non professional use only and not for

commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by

using this product in an unstable position vibrations or shocks or by

failure to follow any other warning or precaution contained within this

user manual will not be covered by warranty.

21. Never remove the casing of this apparatus.

22. Never place this apparatus on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as the power

supply cord or the plug, when liquid has been spilled or objects have

fallen into the apparatus, when the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

26. Prolonged exposure to loud sounds from personal music players may lead

to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor :

 If any trouble occur, disconnect the AC power card and refer servicing

to qualified personnel.

 To completely disconnect the power input, the mains plug of the

apparatus shall be disconnected from the mains, as the disconnect

device is the mains plug of apparatus.

 Don’t step on or pinch the power adaptor. Be very careful,

particularly near the plugs and the cable’s exit point. Do not place

heavy items on the power adaptor, which may damage it. Keep the

entire device out of children’s reach! When playing with the power

cable, they can seriously injure themselves.

5

 Unplug this device during lightning storms or when unused for a long

period.

 The socket outlet must be installed near the equipment and must be

easily accessible.

 Do not overload ac outlets or extension cords. Overloading can cause

fire or electric shock.

 Devices with class 1 construction should be connected to a main

socket outlet with a protective earthed connection.

 Devices with class 2 construction do not require a earthed connection.

 Always hold the plug when pulling it out of the main supply socket. Do

not pull the power cord. This can cause a short circuit.

 Do not use a damaged power cord or plug or a loose outlet. Doing so

may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing

coin / cell batteries:

Warning:

 “Do not ingest battery, Chemical Burn Hazard” or equivalent working.

 [The remote control supplied with] This product contains a coin /

button cell battery is swallowed, it can cause severe internal burns in

just 2 hours and can lead to death.

 Keep new and used batteries away from children.

 If the battery compartment does not close securely, stop using the

product and keep it away from children.

 If you think batteries might have been swallowed or placed inside any

part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:

 Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type.

 Battery cannot be subjected to high or low extreme temperatures,

low air pressure at high altitude during use, storage or transportation.

 Replacement of a battery with an incorrect type that can result in an

explosion or the leakage of flammable liquid or gas.

 Disposal of a battery into fire or a hot oven, or mechanically crushing

or cutting of a battery, that can result in an explosion.

 Leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or that leakage of flammable

liquid or gas.

 A battery subjected to extremely low air pressure that may result in

an explosion or the leakage of flammable liquid or gas.

 Attention should be drawn to the environmental aspects of battery

disposal.

INSTALLATION

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage

and before all other connections have been made.

6

WARNING: When participating in the traffic listening to a personal

music player can make the listener less aware of potential dangers

such as approaching cars.

WARNING: To prevent possible hearing damage, do not listen at

high volume levels for long periods.

7

1. Get to know the controls on Player

Item

Description

1

TFT LCD Display

2

Button (ON / OFF, Play / Pause, Select / Enter)

3

Button (Previous / Fast-Rewind, Item up)

4

Button (Next / Fast-Forward, item down)

5

M Button (Call Menu / Submenu)

6

Button (Exit; Back to Previous Menu / Main Menu)

7

Micro USB Port (PC Connection / Charge)

8

Microphone Position (inside Micro USB port)

9

Micro SD Memory Card Slot

10

Earphone Output Jack (3.5mm Stereo)

11

Button (Volume Down)

12

Button (Volume Up)

2. Insert Micro SD Memory Card

This device is design without an internal memory; before you use it,

please must insert a Micro SD memory card into player.

 Turn “Off” the play, then plug in the Micro SD memory card into player

card slot;

 Now you can use the player for upload / download the desired media

files with your PC computer.

 Or, Upload the desired media files direct to the Micro SD memory card

with your computer before insert it into player.

 However, “Card error / no card” will display if Micro SD memory card is

not in place or not in proper position when you want to enter into related

menu.

8

Note: Make sure the player power is in “Off” status when insert / remove the

Micro SD memory card from mem ory card slot. Otherwise, the player

functional may result dead halt or the internal data / files will be lost or

damaged.

3. About Player Battery

Player has an internal, non–user-replaceable battery. For best results,

the first time you use player, let it charge for about 3 ~ 4 hours or until the

battery status icon in the “Connect” screen shows that the battery is in full.

Battery is full

Note: Player may continue use battery power after it’s been turned off. For

maintain the battery life and performance, if unit isn’t used for a while, the

battery need to be recharged, recharging the battery at least once per

month.

Warning: better use the original USB cable delivered with your MP3

player. This cable is a data and charging cable. Some other USB cables in

the market are charging only cables. If you use a charging only cable to

transfer data from your computer to your player, it will only show the

battery symbol on the screen and will not be detected by your computer

as an external drive; this means that you cannot transfer any files from

your computer to your MP3 player.

Note :

The player contains a built-in temperature monitor sensor. If it senses that

the battery pack temperature is not in good condition it will control and

stop the charging function. The charging function will be automatically

restored when the detected battery pack temperature returns to within

normal limits.

a. Charging the Battery:

You can charge the player battery in two ways:

 Connect player to your computer. Or,

 Use the USB power charger. (not included)

b. Connection and Charging:

 Once you have connected player with computer / power charger, then

you will see the “Choose connection” screen appear to choose and it will

switch to Charge & Transfer” mode automatically if no action in 4 ~ 5

seconds.

 Choose “Charge & Transfer” to upload or download the media files with

9

your computer and charging the Player’s battery.

 Choose “Charge & Play” to operates the Player’s function and the battery

charging in background.

 The level bars are running in battery icon at the “Connect” screen. The

battery is in charging.

“Choose connect type” “Charge & Transfer” “Charge & Play”

or

In Charging

Important: The battery does not charge when your computer is in sleep. The

USB port on most keyboards does not provide enough power to charge the

player. Connect player to a USB port on your computer only to prevent

charge problem.

4. Connecting and Disconnecting Player

a. To Connecting Player:

 To connect player to your computer, plug the connector of USB Cable into

a USB port on your computer, and connect the other end to player,

 Then the player is ready for media files transfer with your computer and

the battery is charging when “Charge & Transfer” mode is selected. And

the “Connect” screen is appearing for view.

 Now you can transfer the media files by using the computer mouse use

drag and place, or copy and paste, in between the player and your

computer.

b. To Disconnecting Player:

It’s important not to disconnect player while it’s syncing or transferring

files. Eject the player before disconnect it.

 To eject player, press once M button, the “Connect” screen will switch to

“Main Menu” screen. And now is safe to disconnect the player with your

computer. Unplug the USB cable from the player. Or,

 If you’re using a Windows PC, you can also eject player in My Computer

or by clicking the “Safely Remove Hardware” icon in the Windows

system tray, select the correspondence name of USB Device and choose

10

“Stop” or “Eject” follow by the pop-up windows you’re your computer.

 If you’re using a Mac, you can also eject player by dragging the player

icon on the desktop to the Trash.

 Disconnect the USB cable from the player and computer, simply remove

it.

 If you accidentally disconnect player without ejecting it, reconnect it to

your computer and sync again. However, some media file may loss.

5. Getting Start the Player

Turn ON / OFF the player and use of Main Menu:

 To turn ON the player, press and hold the button for 3 seconds, then

you will see any one of the following shown Main Menu screen,

“Bluetooth / Music / Movie / Record / Picture / Setup / eBook”, will

appear on LCD after the Loading and Opening screen have displayed.

 To turn OFF the player, press and hold the button for 3 seconds.

“Main Menu” screens

6. Use Setup Menu

You might need to set date & time or change some default setting as you

desired in setup menu before you start to use the player.

 To go into setup menu, from main menu, choose “Setup” by using /

and buttons, a “Setup” menu appears to use;

 For back to previous menu or main menu, press or pressing button

during in setup menu and submenu.

11

“Setup” Menu

a. Sleep timer:

 In Setup menu, choose “Sleep timer”, by using / and buttons

then choose “Off” to switch off it. ( factory default is “Off”)

 In Setup menu, choose “Set sleep timer” to switch On the sleep timer, a

levels bar with number appear to use, then choose “1 ~ 99” (Minutes) as

you want by using / buttons and buttons.

 The Player will turn off itself automatically as your desired time set.

b. Display settings:

You can set the backlight to illuminate the screen for a certain amount of

time as you desired, or make the backlight to “always On” when every time

you turn ON the player.

 In Setup menu, choose “Display settings” > choose “Backlight timer”, a

list appear to use, then chose “Always On / 10 / 20 / 30 seconds” as you

desired by using / buttons and buttons. Choose “Always On”

to prevent the LCD backlight from turning to off. (choosing this option

decrease battery performance)

 Choose “Screen saver” > choose “Digital clock” or “Screen off” to turn

On and Off the screen saver function. Chosen digital clock to display the

date and time when the screen saver if in On.

c. Date & Time:

 In Setup menu, choose “Date and time” by using / button and

button, a list appears to use.

Set Time

 Choose “Time settings” to set clock, then choose “Set time format” or

“Set time” as you want;

 Choose “Set time format” then choose “12 Hours / 24 Hours” show

format as you desired.

 Choose “ Set time”, a clock interface will appear to set;

 The “Hour / Minute” set item is highlighted, press M button to switch in

between Hour and Time which you want to set. And adjusting hour and

minute to current time by pressing the / button.

 Finally, you need to press the button to confirm the adjustment and

the screen will back to previous menu.

Set Date

 Choose “Date settings” to date, then choose “Set date format” or “Set

12

date” as you want;

 Choose “Set date format” then choose ““YYYY MM DD / MM DD YYYY /

DD MM YYYY”” which format as you desired.

 Choose “ Set date”, a date interface will appear to set;

 The “MM / DD / YY” set item is highlighted, press M button to switch in

between day, month and year which you want to set. And adjusting them

to current date by pressing the / button.

 Finally, you need to press the button to confirm the adjustment and

the screen will back to previous menu.

d. Language:

This player can use difference OSD languages.

 To set the language, choose “Language”, and then choose which

language as you desired by using / buttons and button.

e. Information:

You can view about the player information and Micro SD memory card

status, such as firmware version, remaining memory space available and the

number of support media files available in player.

 In Setup menu, choose “Information” by using / button and

button, a list appears to use.

 Choose “Player information” or “Disk space” which you want to view.

f. Factory Settings:

 In Setup menu, choose “Factory settings”, a dialog “Restore factory

settings?” will pop up to confirm;

 Choose “Yes” to confirm. Or, “No” to abort.

 Press button to exit Setup menu.

7. Use Bluetooth Menu

To Turn On the Bluetooth Function:

 From the main menu, choose the Bluetooth menu by using /

and buttons, a Bluetooth sub menu appears.

Search and Pair Bluetooth device.

NOTE: Before pairing, please make sure your Bluetooth Receiver Device

supports the Bluetooth A2DP profile.

 Keep the device within a 1 meter range of your Bluetooth receiver device.

Power it On and set it into searching/pairing mode;

 Turn the BT On in “BT Control” menu.

 Then, in the Bluetooth list menu choose “Search Device” by using the

/ and buttons, the device will start searching for approximately

10 ~ 20 seconds. Devices found will be listed on the screen.

 Choose your device from the on screen list and choose “Pair/connect” by

using the / and button.

13

 Choose “Folders & songs” in the Music menu list to directly select your

favorite music.

 The player will switch to the “Now Playing” screen and a Bluetooth icon

“ ” will show on the display indicating the Bluetooth connection is ok. If

the connection is lost the color of the Bluetooth symbol will change to

grey.

 You now can select Previous/Next/Play/Pause and adjust Volume by

using the / , and / buttons.

 To exit the Bluetooth Transmission function, press the button until

you see the main menu icons. Select the Bluetooth menu. Select

‘BTcontrol’ from the list and select ‘Turn BT off’.

Bluetooth Function notes:

1. When using the Bluetooth audio transmitting mode, the players earphone

output will be turned off automatically;

2. There is no fast-forward/backward function in Bluetooth mode.

8. Use Music Menu

You can use this music player to playback with almost full format of music

file of audio coding. To open the music player in Main Menu:

 From main menu, choose “Music” by using / and button, a

list menu appears to use;

 Choose “Folders & songs / Artists / Albums / Genres / Update

Playlist” as you desired;

 Choose “Folders & songs”, you will see all supported song files will list

out in playlist when item selected > choose a song file in list where start

the play.

 Choose “Artists” to enter folder(s) list menu grouping by Artist name,

then choose who name of Artist folder > choose a song file in list where

start the play.

 Choose “Albums” to enter folder(s) list menu grouping by Album name,

then choose who name of Album folder > choose a song file in list where

start the play.

 Choose “Genres” to enter folder(s) list menu grouping by Genres name,

then choose who name of Genres folder > choose a song file in list where

start the play.

 Choose “Playlists” > choose “Playlist on the go [1] / Playlist on the go [2]

/ Playlist on the go [3]” > Select the song which you want to start with.

14

(you have to add songs to the selected playlist before you can use it. read

the “add to playlist” section of the “Music submenu” part, on page 13,

for more information.

 Choose “Update playlist” to update the playlist when you found it show

incorrect; actually, it is normal due to some media files could be manual

deleted in Micro SD memory card by user in some case. However, update

the playlist when necessary.

“Music Menu”

“Music Now Playing Interface” “Music Submenu Menu”

To Play Music

 In Folder & songs / Artists / Albums / Genres list menu, choose a song

file to start the play by using / and button. Then the Music

interface will appear to view and use;

Play / Pause Song

 In music now playing interface;

 Press button to pause the playing music. Press it again to resume.

Next / Fast-forward and Previous / Fast-backward Song file

 Press button to play next music file.

 Press button to play previous music file.

 Press and hold button to use fast-forward

 Press and hold button to use fast-backward.

Adjust volume level

 Press or pressing / button to adjust volume levels to up / down

and a volume control screen is appear for viewing.

 Wait for 6 seconds or press button to return to music now playing

screen.

For hearing protection; a beep warning will be heard from earphone, or

15

display warning pop-up on TFT screen, when every time you increase the

volume level and reach to the default setting level which may exceed 85dB.

Press M button to accept the warning and enter into the volume control for

increase the level and until to maximum level.

Use Lyric Display

This player supports “*.LRC” lyric files and lyrics can synchronous

displayed while playing music if you music has lyric included.

 When the playing music included with lyrics file, then the lyrics display

mode will switched on automatically and the lyrics will display at the

music now playing interface.

9. Music Submenu

 In music now playing interface, press M button to enter to music

submenu, a music submenu “Play mode / Equalizer / Add to Playlist /

Remove from Playlist / Delete” is appear to choose;

a. Play Mode:

 In Music submenu, choose “Play mode”, a list menu “Repeat / Shuffle”

appears to choose;

 Choose “Repeat” > choose “choose “Repeat off / Repeat 1 / Repeat all /

Repeat folder” as you desired play mode by using / and

buttons.

 Choose “Shuffle” > choose “Off / On” as you desired.

b. Equalizer

 In Music submenu, choose “Equalizer”, then choose “Normal / Rock /

Funk / Hip hop / Jazz / Classical / Techno” as you desired sound effect by

using / and buttons.

Note : The equalizer function don’t work when using a Bluetooth

earphone/headphone. Only when using a cabled device the equalizer

function will work.

c. Add to playlist

 When playing a song you would like to add to a playlist, press the “M”

button and use the / keys to go to the “add to playlist” option

and select with Then you can select the playlist you want to add this

song to;

 Repeat the above steps to add more songs to your playlist(s)

 To use the playlist you made. Select “playlist”on the main menu and then

select your favorite playlist

NOTE: It is possible to manually create a playlist for use with your mp3 player.

You can use MediaMonkey for Windows computer. This is a freeware mp3

manager/player in which you can create your own playlists. The Xemio-768 /

16

MP-208 is compatible with .M3u playlist files. Instructions on how to create

playlists can be found on the website from MediaMonkey. You can find the

information and download MediaMonkey from www.mediamonkey.com

d. Remove from playlist

 When you are playing music from the playlist and want to remove the

current song from the list the you press the “M” button.

 Select “Remove from playlist” and select the playlist you’re currently

using.

 A dialog screen will appear

 Choose “Yes” to confirm or choose “No” to abort.

 Repeat the above steps if you want to remove more music files from the

playlist.

e. Delete:

 In Music submenu, choose “Delete file” by using / and

buttons;

 A “song name…” delete? dialog is appear to confirm, choose “Yes” to

confirm delete the current song file in Micro SD memory card;

 A “deleting” dialog is appears for few seconds and the current song file is

deleted. And the next song’s file is selected to play automatically.

 Choose “No” to abort.

10. Movie Menu

To Play Movie

 From Main Menu, choose “Movie” by using / and buttons, a

files list appears to choose;

 Choose the desired movie file to start the play and the screen switch to

movie now playing screen. The movie is playing automatically.

Play /Pause Movie

 In movie now playing screen, press button to pause the playing.

 Press it again to continue the play.

 Press button to go back files list screen for choose another movie file

to play if you want it.

Play Previous or Next Movie file

 Press button to play next movie file.

 Press button to play previous movie file.

Fast-Forward or Fast-Backward

 Press and hold button to play fast-forward.

 Press and hold button to play fast-backward.

Adjust Volume Level

 In movie now playing screen,

17

 Press or pressing button to increase the volume level.

 Press or pressing button to decrease the volume level.

For hearing protection; a beep warning will be heard from earphone, or

display warning pop-up on TFT screen, when every time you increase the

volume level and reach to the default setting level which may exceed 85dB.

Press M button to accept the warning and enter into the volume control for

increase the level and until to maximum level.

11. Use Movie Submenu

You might need to change the play mode or delete some unwanted

movie files. To do this:

 In movie now playing screen, press M button, a movie submenu “Repeat

/ Delete video / Update Playlist” is appear to choose;

a. Repeat:

 Choose “Repeat” > choose “Repeat off / Repeat 1 / Repeat all” as you

desired play mode by using / and buttons.

b. Delete Video:

 Choose “Delete Video” by using / and buttons;

 A “video name…” delete? dialog is appear to confirm, choose “Yes” to

confirm delete the current song file in Micro SD memory card;

 A “deleting” dialog is appears for few seconds and the current song file is

deleted. And the next movie’s file is selected to play automatically.

 Choose “No” to abort.

c. Update playlist:

 Choose “Update playlist” to update the playlist when you found it show

incorrect; actually, it is normal due to some media files could be manual

deleted in Micro SD memory card by user in some case. However, update

the playlist when necessary.

12. Convert Video files into AVI/AMV

This tool can be used to transform those video files into AVI/AMV files on

the computer before upload them to your player.

 To install this video convert tool to your computer, open a folder named

“UTILITIES > Video Conversion Software” which stored in a provided

Micro SD memory card. (Download it onto your computer for copy and

installation)

 Select “Setup” to start the install program, the software will

automatically install to your computer.

 After installation is done, open folder “Media Player Utilities” > click

program “AMV&AVI Video converter” in All Program bar on your

window PC. The program interface as shown below:

18

Noted: This program is used to convert video files into AVI/AMV format,

currently AVI/AMV format is supported by this player.

 Then click to choose the folder where to save the AVI/AMV files, and

then click to select the folder where the original files are. The

original file will show in the file window once selected.

 Move the mouse arrow and left click mouse on the unconverted source

files to select with highlight in the file window, then the icon will be

highlighted into icon. Now click this icon and a dialog box will be

shown.

19

 Now click this icon and a dialog box will be shown.

 Make sure Video type is “AVI” or “AMV”, Screen width and height is

“160x120 / 320x240” selected. Video convert and Image quality should

be “Normal” and “High” as defaulted. Click “OK” to confirm the setting.

 Now click to start converting.

20

 After conversion, the AVI/AMV files will play automatically for preview.

 And now, the converted AVI/AMV file is ready to transfer, you can simply

copy and place those converted AVI/AMV files to the media player.

Note: Only pixels in “160x120 / 320x240 (max.)” can be supported by this

player.

13. Use Record Menu

You can use the player as a Voice Recorder and recording voice memos

using the built-in microphone. Besides, look for the recorded file(s) and

playback them in same menu. To do this:

 From main menu, choose “Record” by using / and buttons,

a list menu appear to choose;

a. Start Voice Recording:

 From list menu, choose “Start Voice Recording”, a “Now Recording”

screen appear to view and it is in recording;

“Now Recording” Screen

To Start / Pause Recording

 In recording mode, press button to pause the recording.

 Press button again to start the recording again.

To Save and Stop Recording File

 Press button, a “save recording?” dialog pop up to confirm;

La page charge ...

Lenco XEMIO-768 Pink Le manuel du propriétaire

Ce manuel convient également à

Lenco XEMIO-768 Pink Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents