Marvel MP36BF2LS Le manuel du propriétaire

Catégorie
Congélateurs
Taper
Le manuel du propriétaire
Operation
and
Maintenance
Instructions
Built-In
Bottom-Freezer
Refrigerator
MP36BF2
2
Congratulations
We hope you will enjoy and appreciate the care and attention we have put into every detail of your new, state-of-the-art
Marvel Built-in Refrigerator.
Your appliance is designed to offer years of reliable service. This Use and Care Guide will provide you with the information you
need to become familiar with your refrigerator’s care and operation.
Your complete satisfaction is our ultimate goal. If you have any questions or comments about this product, please contact the
dealer from whom you purchased it, or contact our Consumer Support Center at 1-888-845-4641.
We appreciate your choice of our refrigerator and hope that you will again select our products for your other major appliance
needs.
For more information about the complete and growing selection of products, visit us online at www.agamarvel.com
Getting Started
Warnings _______________________________________________________________________________________ 3
Important Information __________________________________________________________________________ 4
Proper Disposal (of old refrigerator) ________________________________________________________________ 4
Features _______________________________________________________________________________________ 5
Product Controls
Settings and Functions ___________________________________________________________________________ 6
Operation
Refrigerator ____________________________________________________________________________________ 9
Freezer _______________________________________________________________________________________11
Automatic Ice Maker ____________________________________________________________________________11
Food Storage Guide ____________________________________________________________________________12
Product Care
Cleaning and Maintenance ______________________________________________________________________13
Troubleshooting ________________________________________________________________________________16
Service Information _____________________________________________________________________________17
Warranty ______________________________________________________________________________________18
Table of Contents
3
Warnings
WARNING
To reduce the risk of re, electric shock, or injury when
using your unit, follow these basic precautions:
• Read all instructions before using the unit.
NEVER allow children to operate, play with, or crawl inside
the unit.
NEVER clean unit parts with ammable uids. The fumes
can create a re hazard or explosion.
ALWAYS turn the power on/off switch (located behind
the air grille on top right side) to the OFF position before
attempting to change light bulbs, clean, or service the
unit.
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER
FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY
OF THIS OR ANY OTHER APPLIANCE. THE FUMES CAN
CREATE A FIRE HAZARD OR EXPLOSION.
WARNING
ELECTRICAL SHOCK HAZARD
• Plug into a grounded 3-prong outlet.
If a 2-prong wall receptacle is encountered,
contact a quali ed electrician.
DO NOT remove ground prong.
• Unit must be grounded at all times.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow these instructions can result
in death, re, or electrical shock.-
Your safety is important to us. This use and care manual contains safety symbols and statements. Please pay
special attention to these symbols and follow any instructions given.
This symbol alerts you to hazards such as fi re, electrical shock or other injuries.
WARNING
To avoid serious illness or death, do not use unit where water
is unsafe or of unknown quality without adequate disinfection
before or after use of lter.
WARNING
To avoid electrical shock which can cause severe personal
injury or death, turn power disconnect switch to OFF before
cleaning. After cleaning, return power disconnect switch to
ON position.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power or turn power disconnect switch
to OFF position before removing top grille. Failure
to do so can result in death or electrical shock.
WARNING
BURN HAZARD
DO NOT touch condenser coils near defrost
pan. Doing so can result in burns.
4
Getting Started
Important Safety Instructions
Proper Disposal
(of old refrigerator)
Install and level your refrigerator on a fl oor that will hold its weight,plus food weight (approximately 1200 pounds [540kg])
and in an area suitable for its size and use.
DO NOT install a refrigeration unit near a heat source, nor in a location where the surrounding temperature will fall below
60°F (16° C).
DO NOT allow your refrigerator to be exposed to the weather or outdoor elements.
Connect your refrigerator only to the appropriate kind of electrical outlet, with the correct power supply and grounding.
(Refer to the Electrical Requirements section of the Installation Instructions.)
• Use the refrigerator only for the uses described in this manual.
• Properly maintain the refrigerator.
• Be sure the refrigerator is not used by anyone unable to operate it properly.
IMPORTANT:
Now that you have a new refrigerator, it is extremely important that you dispose of your old appliance in a way that minimizes
the possibility that children will fi nd it. There have been many cases in years past of children crawling inside junked and
abandoned refrigerators and becoming trapped or suffocated.
Contact your municipal waste disposal authority to fi nd out the best and safest way to dispose of your old refrigerator.
WARNING
RISK OF CHILD ENTRAPMENT
Before You Throw Away Your Old Refrigerator or Freezer:
• Take off the doors.
• Leave the shelves in place so that children may not easily climb
inside.
5
Getting Started
ProChill™ Temperature Management System
The variable speed DC Overdrive™ Compressor is one of the quietest, most technologically advanced compressors
available. Electronic controls with digital temperature readouts, maintain temperatures and the multi-channel airfl ow system
and Odor Eliminator™ Evaporator remove odors and excess humidity.
Plasmacluster™* Ion Air Purifi er
The Plasmacluster™ Ion Air Purifi er uses ions to eliminate airborne bacteria and mold spores, remove odors and enhance
food preservation. Because of the unique technology, the Plasmacluster™ will continue to keep the refrigerator bateria and
mold free without ever having to be replaced.
Adjustable Humidity Zone™ Drawer(s)
Equipped with an adjustable humidity control, the Adjustable Humidity Zone™ Drawer(s) can be set on the high setting for
leafy greens or the low setting for fruits and vegetables with skins.
LED Lighting
Top and sidewall interior LED lighting provides bright illumination of refrigerator contents.
Super Clog-Resistant™ Condenser
The pin and tube design of the condenser coil prevents dust and other airborne particles from clogging the condenser.
Under normal operation, the condenser is maintenance-free.
*Plasmacluster is a trademark of Sharp Corporation.
Features
1
2
3
4
6
5
7
8
11
10
12
9
1. Variable Speed DC
Overdrive™ Compressor and
Super Clog-Resistant™
Condenser
2. Plasmacluster™ Ion Air
Purifi er
3. Electronic Controls with digital
temperature readouts
4. Spillpoof Plus Shelf w/
Nano Technology
Full-Width (1)
Spillproof Shelves
Full-Width (2)
5. Dairy Compartments (2)
6. Half-Width Adjustable Door
Bins (3)
Full-Width NonAdjustable
Door Bin (1)
(Patented )
7. Wire Freezer Basket (2)
8. Ice Bucket (1)
9. Large Pizza Box Storage
10. Adjustable Humidity Zone™
Drawers (2)
11. Deli Drawers
12. LED Lighting
6
Product Controls
Settings and Functions
I n order for your new refrigerator to work properly, it is important that you understand its various features, controls, and
how to use them.
Power On/Off Switch (Power Interruption Switch)
The power on/off switch is located behind your refrigerator’s top grille. It is used to turn the power off when cleaning the
refrigerator or changing the light bulbs. Your refrigerator arrives from the factory with the power interruption switch on.
To turn power off, remove the center grille louver. Press the power on/
off switch to the off position.
To turn power on, press power on/off switch to the on position. Replace
the center grille blade.
IMPORTANT: Be sure the power on/off switch is in the on position after cleaning or changing light bulbs.
Showroom Mode Initiation
Showroom mode allows electronic controls and interior lights to function independently of refrigeraton system.
To enter the showroom mode: Press and hold ”ACTIVATE CONTROLS” pad; while holding, press and hold the “HIGHER”
and “ALARM OFF” pads together for 3 seconds. Three beeps will sound and SHOW will be lit. Showroom mode is
entered.
To exit the showroom mode: press and hold “ACTIVATE CONTROLS” pad; while holding, press and hold the “HIGHER”
and “ALARM OFF” pads together. Three beeps will sound and control will revert to normal operation and display.
Power
Switch
FREEZER
FREEZER
MAX FRZ
MAX FRZ
MAX REF
MAX REF
F
FAST COOL
FAST COOL
SAB SHOW
SAB SHOW
REFRIGERATOR
REFRIGERATOR
DOOR OPEN
DOOR OPEN
POWER
POWER
HIGH TEMP
HIGH TEMP
C
Electronic Temperature Settings
Your refrigerator’s electronic controls are located behind the door above the cabinet interior. To activate the electronic
control panel, press “ACTIVATE CONTROLS” pad. All other pads, except the “ALARM OFF” pad, will remain inactive until
the ”ACTIVATE CONTROLS”pad is pressed. Once activated, pad remains programmable for at least ten minutes.
When you fi rst plug your new refrigerator in, you will fi nd that the refrigerator is factory set at 38° F in the refrigerator and
0° F in the freezer. Wait 24 hours after plug-in for the cabinets to reach this setting. After 24 hours, you may adjust controls
as desired.
To change from °F to °C, press and hold “ACTIVATE CONTROLS” then press and hold “ALARM OFF” for 3 seconds. To
change back, follow the same steps.
To adjust the refrigerator or freezer temperature, simply press the ”ACTIVATE CONTROLS” pad, then “Ref Temp” pad or
“Frz Temp” pad. Press the “HIGHER” or “LOWER” pad to adjust temperature setting one degree at a time.
Note: Allow 24 hours for temperature to reach desired setting after any change in set temperature.
7
Product Controls
Settings and Functions
Entry Tone
The entry tone is the “beep” you will hear when you press the control pad. You can deactivate the entry tone by pressing
and holding the ”ACTIVATE CONTROLS” pad for three to fi ve seconds. You will hear three short beeps to let you know
that the entry tone feature has been deactivated.
To activate the entry tone, simply press and hold the ”ACTIVATE
CONTROLS” pad for three to fi ve seconds.
Fast Cool
Fast Cool runs the compressor at high speed for 2 hours to cool the refrigerator as quickly as possible. After 2 hours, the
refrigerator will return to the previous setting.
To activate fast cool, press ”ACTIVATE CONTROLS” followed by the “FAST COOL” pad. The fast cool light will be lit.
Max Refrigerator Mode
Max refrigerator mode adjusts the refrigerator temperature to the coldest setting for four hours, at the end of which the
refrigerator’s temperature automatically returns to its previous setting.
To activate the max refrigerator mode, simply press the ”ACTIVATE CONTROLS” pad, followed by the “MAX REF” pad.
The “MAX REF” light will glow to let you know you’ve turned on the max refrigerator mode.
To deactivate the max refrigerator mode before the end of the four hour cycle, press the ”ACTIVATE CONTROLS” pad,
followed by the “MAX REF” pad.
Max Freezer Mode
Max freezer mode adjusts the freezer temperature to the coldest setting for 6 hours, at the end of which, the freezer
temperature automatically returns to its previous setting.
To activate the max freezer mode, press the ”ACTIVATE CONTROLS” pad, followed by the “MAX FRZ” pad. The
“MAX FRZ” light will glow to let you know you have turned on the max freezer mode.
To deactivate the max freezer mode before the end of the 6 hours cycle, simply press the ”ACTIVATE CONTROLS” pad,
followed by the “MAX FRZ” pad.
Door Open Alarm
Door open alarm sounds and the “DOOR OPEN” light blinks if either door is left open for more than three minutes.
To deactivate the door open alarm, press the “ALARM OFF” pad or close the door that is open.
High Temperature Alarm
High temperature alarm sounds and the “HIGH TEMP” light glows if the refrigerator or the freezer temperature is too
high for two hours. A blinking light signals which part of the appliance is affected. The alarm sound will end when the
temperature is brought back to a proper setting.
To deactivate the high temperature alarm, press the “ALARM OFF” pad.
Power Loss Alarm
No alarm sounds, however, the “POWER” indicator fl ashes indicating a power loss. Press “ALARM OFF” to clear.
Temperature Sensor Alarm
Temperature sensor alarm is a special feature that electronically senses temperature sensor problems. The temperature
sensor alarm will sound and the display will show either oPn or Shr. The alarm can be deactivated by pressing the “Alarm
Off” pad on your refrigerator’s control panel. If the display does not return to showing the temperature, contact an
authorized technician immediately.
8
Settings and Functions
Product Controls
Display
To activate temperature display, press the ”ACTIVATE CONTROLS” pad.
To deactivate temperature display, press the ”ACTIVATE CONTROLS” pad, followed by the “DISPLAY OFF” pad.
Sabbath Mode
Sabbath mode is used to disable interior lights and alarms for observance of the Sabbath.
Before the Sabbath mode is engaged, the bale arm of the ice maker needs to be raised until it clicks into the detent. This
turns off the power to the ice maker.
To enter Sabbath mode, press the ”ACTIVATE CONTROLS” pad to activate the control panel. Then, press and hold
“Activate Controls” and “Display Off” pads simultaneously for three seconds. It will beep three times and light the SAB
indicator so you will know that you have activated Sabbath mode.
When your refrigerator is in Sabbath mode, interior lights, display (excluding SAB indicator, temperature, and compartment
indicator), and alarms are disabled.
If your refrigerator loses power while in Sabbath mode, it will return to the Sabbath mode when power is reestablished.
To exit the Sabbath mode, press the ”ACTIVATE CONTROLS” pad. Then, press and hold “ACTIVATE CONTROLS” and
“DISPLAY OFF” pads simultaneously for three seconds. You will then hear three beeps letting you know that you have
turned the Sabbath mode off.
Once your refrigerator has left the Sabbath mode, the bale arm of the ice maker needs to be pushed downward until it is no
longer in the detent. This will restore power to the ice maker.
9
Spillproof Plus Shelves with Nano Technology
Some refrigerator models include Spillproof Plus shelves. These spillproof shelves contain liquids
with no raised edges in order to provide extra shelf capacity.
Standard Spillproof Shelves
Standard spillproof shelves are constructed of polypropylene molded around the glass and metal
rail. This design means that the shelves are completely enclosed and liquids can’t seep under the
glass. This localizes spills and makes clean-up easier.
Note: Foods and beverages placed on the uppermost shelf under the air vent may freeze.
Shelf Adjustment
You can adjust the shelves to match the way you use your refrigerator. To remove the shelves, push
up on the shelf, tilt upward at the front releasing the hooks from the shelf support, then pull the shelf
straight out.
To replace shelves, guide the rear hooks of the shelf into the slots in the shelf supports. Then, tilt the
shelf up at the front until the hooks drop into the slots, and lower the front of shelf to level position.
CAUTION
To avoid personal injury and property damage, con rm shelf is secure
before placing items on shelf.
CAUTION
To avoid personal injury or property damage, handle tempered glass
shelves carefully. Shelves may break suddenly if nicked, scratched, or
exposed to sudden temperature change.
Operation
Refrigerator
Door Bin Adjustment
Your refrigerator’s door bins hold two-liter bottles and can be placed in any position on the
refrigerator door. To remove a bin, simply grasp it, lift the bin up, and pull it out.
To replace the bin, place it over the glides in the refrigerator door, and push the door bin down
to lock it into place.
Dairy Compartments
Your refrigerator’s dairy compartment doors are surrounded by gaskets for a tighter seal. This
allows items to stay fresh much longer. The dairy compartments can be adjusted to meet your
unique storage needs.
To remove the dairy compartments, simply grasp, lift up and pull out. To replace, position the
dairy compartment over the glides in the refrigerator door, and push the compartment down
to lock it into place.
1
2
10
Refrigerator
Operation
Adjustable Humidity Zone™ Drawer(s)
The moisture control on your refrigerator produce drawer(s) gives you the ability to change the amount of moisture or
humidity in a drawer, and the clear top section allows you to see into a drawer without opening it.
The moisture control is located underneath the front trim. Slide the control to a higher setting for storing deli items
or produce with leaves, such as lettuce, spinach, or cabbage. Slide the control to a lower setting for storing fruits and
vegetables with skins, such as apples, corn, or tomatoes. See “Food Storage Guide” (pg. 12) for more information on storing
foods properly.
To remove drawer, roll the drawer out to the stop. Then, on each side of the drawer, locate the black lever on the glides and
lift up until the drawer disengages from the glides. Pull the drawer out the rest of the way.
To replace the drawer, extend the glides out to the stop. Next, place the drawer onto the glides and push it back until the
drawer engages the hook. Lower the front part of the drawer, grasp the glides/drawer and lightly squeeze until the drawer
snaps onto the glides. Then slide the drawer back until it stops.
M
OIS
TU
R
E
C
O
N
T
R
OL
L
OW
H
IGH
MOISTURE CONTROL
LOW
HIGH
Deli Drawers
To remove drawer, roll the drawer out to the stop. Then, on each side of the drawer,
locate the black lever on the glides and lift up until the drawer disengages from the
glides.
Pull the drawer out the rest of the way. To replace the drawer, extend the glides out
to the stop. Next, place the drawer onto the glides and push it back until the drawer
engages the hook. Lower the front part of the drawer, grasp the glides/drawer and
lightly squeeze until the drawer snaps onto the glides. Then slide the drawer back
until it stops.
Black
Lever
11
Operation
Freezer
Freezer Basket Divider
The freezer basket divider separates the freezer into sections for easy food organization.
WARNING
If the freezer basket divider is removed, there is enough space for
children to crawl inside. To prevent accidental child entrapment,
DO NOT allow children to play inside drawer.
Automatic Ice Maker
The ice maker and slide-out ice drawer on your refrigerator are not adjustable, but
the ice drawer slides forward for easy access to ice.
After the refrigerator reaches normal temperature, the ice maker fi lls with water and
begins operating. Under normal conditions, the ice maker will produce seven to nine
batches of ice per 24 hour period.
Note: Allow 24 to 48 hours after installation before looking for ice in your ice drawer.
You should discard the fi rst three full drawers of ice produced by your refrigerator,
and should also throw out the fi rst drawer full of ice your refrigerator produces after
extended periods of non-use.
During ice production, the ice maker arm raises and lowers. When the ice bin is
full, the ice maker arm automatically turns the ice maker off. To manually stop
ice production, raise the ice maker arm. You will hear a defi nite click when you have the arm in the right
position. The ice maker won’t produce any more ice until you lower the ice maker arm.
CAUTION
To avoid damage to ice maker, observe the following:
DO NOT force ice maker arm down or up past stop position.
DO NOT place or store anything in ice bucket.
On
Position
Ice
Maker
Arm
Off
Position
12
Food Storage Guide
Operation
Storing Fresh Food
Wrap or store food in the refrigerator in airtight and moisture-proof material. This prevents food odor and taste transfer. For
dated products, check use-by date to ensure freshness.
To store leafy vegetables, remove store wrapping. Then tear off bruised and discolored areas. Wash the vegetables in cold
water and drain, and then place them in a plastic bag or plastic container and store in your produce drawer.
For vegetables with skins, such as carrots and peppers, store in plastic bags or containers.
When refrigerating or freezing fruit, wash the fruit and then let it dry. Store the fruit in plastic bags. Don’t wash or hull berries
until they are ready to use. Instead, sort and keep berries in their original container in the produce drawer, or store in a
loosely closed paper bag on the refrigerator shelf.
Store eggs without washing them. Keep eggs in their original carton or in your refrigerator’s egg bin.
Wipe milk cartons. For best storage, place milk on an interior shelf.
Keep opened butter in covered dish or closed compartment. When storing butter in the freezer, wrap it in freezer packaging.
When you have leftovers, cover then with plastic wrap, aluminum foil, or store the leftovers in plastic containers with tight
lids.
Store meat in its original wrapping, as long as it’s airtight and moisture-proof. Rewrap meat if necessary.
Note: When storing meat longer than the recommended times, freeze the meat.
Recommended storage times:
Chicken 1-2 days Bacon 5-7 days
Ground Beef 1-2 days Cold Cuts 3-5 days
Steaks/Roasts 3-5 days Variety Meats 1-2 days
Cured Meats 7-10 days
Note: Use fresh fi sh and shellfi sh the same day as purchased.
Packaging Food for Freezing
The secret of successful freezing is in the packaging; the way you close and seal a package of food must not allow air or
moisture in or out, or the quality of the food will deteriorate while frozen.
Packaging you should not use for freezing includes:
• Bread wrappers
• Non-polyethylene plastic containers
• Containers without lids
• Wax paper or wax-coated freezer wrap
• Thin, semi-permeable wrap
Recommended packaging:
• Rigid plastic containers with tight-fi tting lids
• Straight-sided canning/freezing jars
• Heavy-duty aluminum foil
• Plastic-coated paper
• Non-permeable plastic wraps (made from saran fi lm)
• Zip-top freezer bags
Follow package or container instructions for proper freezing methods.
Freezing Foods
DO NOT expect your freezer to quick-freeze large quantities of food; DO NOT load more than two to three pounds of
unfrozen food per cubic foot within 24 hours. Leave enough space for air to circulate around packages, and be careful to
leave enough room at the front so the freezer door can close tightly.
A full freezer stays cold longer than a partially fi lled one, and a freezer full of meat stays cold longer than a freezer full of
baked goods. If food contains ice crystals, it may be safely refrozen, although the quality and fl avor may be affected. If the
condition of the food is poor, or if you feel it is unsafe, dispose of it.
Storage times will vary according to the quality of food, the type of packaging or wrap used (airtight and moisture-proof),
and the storage temperature, which should be 0° to 2°F (-18° to -17° C).
13
Cleaning & Maintenance
Product Care
Your refrigerator is built to give you many years of dependable service. However, there are a few things you can do to help
extend its life. This section tells you how to clean your refrigerator and what to do when going on vacation, moving, or
during a power outage.
Interior Surfaces
Wash the interior surfaces of your refrigerator with four tablespoons of baking soda dissolved in one quart of warm water.
Use a soft, clean cloth. Rinse these surfaces with warm water, and dry with a soft clean cloth.
DO NOT use the following to clean interior surfaces:
• Abrasive or harsh cleaners, such as ammonia or chlorine bleach
• Concentrated detergents or solvents
• Metal scouring pads
These products can scratch, crack and discolor your refrigerator’s surfaces. Also, NEVER wash the ice bucket or shelves in
the dishwasher. They must be cleaned by hand.
CAUTION
To avoid personal injury or property damage, read and
follow all cleaning product manufacturer’s directions.
WARNING
T o avoid electrical shock which can cause severe personal
injury or death, turn power disconnect switch to OFF
before cleaning. After cleaning, return power disconnect
switch to ON position.
Cleaning Chart
* Under normal conditions, condenser is maintenance-free.
Part What to Use How to Clean
Removable parts
(shelves, drawers)
Sponge or cloth with mild
detergent and warm water
Hand wash,
rinse, and
dry thoroughly.
Front door panels
• stainless steel
• painted
Stainless steel cleaner
Sponge or cloth with mild
detergent and warm water
DO NOT use cleaners containing
chlorine bleach.
Wipe with soft
cloth.
Hand wash,
rinse, and
dry thoroughly.
Interior walls
(allow freezer to
warm up so cloth
will not stick)
Sponge, soft cloth or paper
towel with baking soda or mild
detergent and warm water
Hand wash,
rinse, and
dry thoroughly.
Door liners and
gaskets
Sponge, soft cloth or paper
towel with mild detergent and
warm water.
DO NOT use cleaning waxes,
concentrated detergents, or
cleaners containing
chlorine bleach.
Wash, wipe, and
dry thoroughly.
Plastic parts
(covers, panels)
Soft, clean sponge or soft clean
cloth with mild detergent and
warm water.
DO NOT use paper towels,
window sprays, or scouring
pads. These can scratch
and damage the fi nish.
Wash, wipe, and
dry thoroughly.
Super
Clog-Resistant™
Condenser*
Vacuum cleaner with
extended narrow
attachment
Vacuum coils
when dusty or
dirty.
14
Product Care
Cleaning & Maintenance
Defrost Pan
To prevent condensation from overfl owing, check defrost pan periodically.
To check defrost pan, remove two screws securing kickplate to unit. Pull defrost pan forward until it stops. Remove any excess
water from pan. Wipe and clean defrost pan with a sponge. Return defrost pan to original position. Return kickplate to unit by
securing with two screws.
Door Stop Adjustment
Your refrigerator is factory set at the 110º door stop position. To change to either the 90° or 120° position, remove the door
stop pin using a 3/16” (0.5 cm) allen wrench.
Glass Shelves
To clean your refrigerator’s glass shelves, lift the shelf out by lifting the front and releasing the hooks from the metal track.
Then pull the shelf out. Be sure to allow the glass shelves to adjust to room temperature before cleaning.
To clean crevices, dilute mild detergent with water. Brush this solution into crevices using a plastic bristle brush. Let set for
ve minutes. Spray warm water into crevices using faucet spray attachment. Dry glass shelf thoroughly and replace shelf by
inserting hooks into metal track and lowering front.
Door Gaskets
Clean the door gaskets every three months using the same procedures used for interior surfaces. You should apply a light fi lm
of petroleum jelly to keep gaskets pliable.
CAUTION
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power or turn power disconnect switch
to OFF position before removing top grille. Failure
to do so can result in death or electrical shock.
WARNING
BURN HAZARD
DO NOT touch condenser coils near defrost
pan. Doing so can result in burns.
Bottom-Freezer
3
1
2
1
Open refrigerator door so door stop and
shoulder screw are accessible.
1
2
2
110˚
110˚
110˚
90˚
120˚
120˚
120˚
Remove shoulder screw and place in
90º or 120º position.
15
Product Care
Cleaning & Maintenance
Saving Energy
You can help your refrigerator use less electricity with these simple tips:
Open the door as few times as possible. Think about what you need before you open the door. Get everything out at one
time. Keep food organized so you will not have to search for what you want. Close door as soon as food is removed.
DO NOT overcrowd the unit so air movement is blocked.
DO NOT set the unit to temperature colder than necessary.
Vacation Tip
When you will be gone from home a short time (less than four weeks), there is no need to shut off your refrigerator. However,
be sure to:
• Use any perishables.
• Freeze other items.
• Raise the signal arm in the automatic ice maker to the off (up) position and shut off water supply to the ice maker.
If you will be away from home for a month or more, follow these guidelines:
• Remove all food.
• Turn the power disconnect switch to the off position.
• Clean the unit and door gaskets according to the “Cleaning and Maintenance” chart on page 13.
• Prop doors open with rubber or wood blocks so air can circulate inside. This will keep odor and mold from building up.
• Raise the signal arm in the automatic ice maker to the off (up) position and shut off water supply to the ice maker.
Power Interruptions
If electric service to your refrigerator will be interrupted for 24 hours or less, keep the doors to the freezer closed. This helps
food stay frozen.
If service will be interrupted longer than 24 hours, remove all frozen food and store it in a frozen food locker, or place two
pounds of dry ice inside the freezer for every cubic foot of interior volume. This will keep food frozen for two to four days. Be
sure to wear gloves to protect your hands from dry ice burns. If neither a food locker or dry ice is available, you should use or
can your perishable food at once.
16
Product Care
Understanding Sounds You May Hear
Your new refrigerator may make different sounds than your old one. Hard surfaces, such as the ceilings, walls, and cabinets
around the unit can make these sounds seem louder. However, these sounds are normal and will soon become familiar; they
indicate that your refrigerator is working properly.
Here are some of the noises you may hear and what they are:
• Freezer or refrigerator fresh food fan: sounds like air rushing or whirling
• Sealed system (evaporator and heat exchanger) refrigerant fl ow: sounds like gurgles, pops or boiling water
• Defrost heater: sizzles, hisses or pops
• Condenser fan: air rushes and whirls
• Compressor: has a high pitched hum or pulsating sound
Ice maker valve hookup: buzzes when ice maker fi lls with water. This occurs whether or not the unit is connected to water
supply. If the unit is not connected to water supply, stop sound by raising ice maker arm to off position.
Troubleshooting
Common Refrigerator Problems
Problem Possible Cause And/Or Remedy
Unit will not operate I s the power cord plugged into a live circuit with
the proper voltage? Has a household fuse blown or
circuit breaker tripped? Is the power switch in the
on position?
Unit makes
unfamiliar sounds
See “Understanding Sounds You May Hear” for
descriptions of normal sounds and what makes them.
Water in the defrost
pan
This is normal in hot, muggy weather. Make sure the
pan is level so it does not overfl ow.
Ice maker will not
operate
Is the freezer cold enough to make ice? It could
take overnight for the freezer to reach the proper
temperature. Is the signal arm in the on (down)
position? Is the water valve turned on? Is water getting
to the water valve? Check water line for leaks.
Lights do not work
Has a household fuse blown or circuit breaker tripped?
Is a bulb burned out? For models with LED lighting,
contact an authorized service agency.
Motor seems to run
too long
The motor naturally runs longer on hot days, if the
room is too warm, if a large amount of food has been
added, or if the doors are opened often.
Temperature display
does not match set
point
Just plugged in unit, just put in hot food, opened the
door for an extended time or frequently. Allow unit to
stabilize for 24 hours.
Ice crescents
attached at corners
This is normal. They break apart easily. Shake bin
occasionally to keep cubes seperated.
Ice maker will not
operate or ice is not
made fast enough
• On/off lever is in the OFF (up) position. Lower
lever to ON (down) position.
• Freezer is not cold enough. Adjust temperature
controls and wait 24 hours.
Off-taste or odor
in ice
• New plumbing connections can cause discolored or
off-fl avored ice. Discard the fi rst three harvests of ice.
• Cubes are stored too long. Throw them away
and make a new supply.
• Food is not wrapped properly
• Freezer and ice bin need to be cleaned
• Water may contain minerals. A fi lter may be needed
to remove them.
Most performance problems you might encounter with your new refrigerator will be minor and you should be able to
x them yourself without tools.
Listed below are the most common problems consumers run into with their appliances. Please read through this and see if it
can solve your problem before calling for service.
17
Product Care
Service Information
If service is required, call your authorized service agency.
Have the following information readily available:
• Model number
• Serial number
• Date purchased
• Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if
you continue to have service problems, call 1-888-845-4641 or write to:
PREFERRED SERVICE
111 Front Street
Greenwood, MS 38930
Record the information indicated below. You will need it if service is ever required. The serial number and model numbers for
your refrigerator are located on the upper wall, behind the lighting:
Model No. ______________________________________________ Serial No. _____________________________________
Date of Purchase ________________________________________ Date Installed __________________________________
Dealer’s Name__________________________________________________________________________________________
Address _______________________________________________________________________________________________
_______________________________________________________________________________________________________
If service requires installation of parts, use only authorized parts to insure protection under the warranty.
Keep this manual for future reference.
18
Product Care
Warranty
BUILT-IN BOTTOM-FREEZER REFRIGERATION WARRANTY
TWO YEAR FULL WARRANTY
Built-in bottom-freezer refrigerators and all of their component parts, except as detailed below*†, are warranted to be free from defective
materials or workmanship in normal residential use for a period of two (2) years from the date of original retail purchase or closing date for
new construction, whichever period is longer. AGA Marvel, warrantor, agrees to repair or replace, at its option, any part which fails or is found
to be defective during the warranty period.
*FULL NINETY (90) DAY COSMETIC WARRANTY: Product is warranted to be free from cosmetic defects in materials or
workmanship (such as scratches on stainless steel, paint/porcelain blemishes, etc.) for a period of ninety (90) days from the date
of original retail purchase or closing date for new construction, whichever period is longer. Any defects must be reported to the
selling dealer within ninety (90) days from date of original retail purchase. AGA Marvel uses high quality processes and materials
available to produce all color fi nishes. However, slight color variation may be noticed because of the inherent differences in
painted parts and porcelain parts as well as differences in kitchen lighting, product locations, and other factors. Therefore, this
warranty does not apply to color variation attributable to such factors.
†FULL NINETY (90) DAY WARRANTY IN “RESIDENTIAL PLUS” APPLICATIONS: This full warranty applies to applications
where use of the product extends beyond normal residential use, but the warranty period for products used in such applications
is ninety (90) days. Examples of applications covered by this warranty are bed and breakfasts, fi re stations, private clubs, churches,
yachts, etc. Under this “Residential Plus” warranty, the product, its components and accessories are warranted to be free from
defective material or workmanship for a period of ninety (90) days from the date of original retail purchase. This warranty excludes
use of the product in all commercial locations such as restaurants, food service locations and institutional food service locations.
SIX YEAR FULL WARRANTY ON SEALED REFRIGERATION PARTS AS LISTED
Any sealed refrigeration system component, as listed below, is warranted to be free from defective materials or workmanship in normal
household use during the third through the sixth year from the date of original retail purchase. AGA Marvel, warrantor, agrees to repair or
replace, at its option, any part which fails or is found to be defective during the warranty period.
Sealed Refrigeration System Components: Compressor, Evaporator, Condenser, Connecting Tubing, Dryer/Strainer
TWELVE YEAR LIMITED WARRANTY ON SEALED REFRIGERATION PARTS AS LISTED
Any sealed refrigeration system component, as listed above, which fails due to defective materials or workmanship in normal household use
during the seventh through the twelfth year from the date of original retail purchase will be repaired or replaced, free of charge for the part
itself, with the owner paying all other costs, including labor.
TERMS AND CONDITIONS
This warranty extends to the original purchaser of the product warranted hereunder and to each transferee owner of the product during the
term of the warranty and applies to products purchased and located in the United States, Canada, Mexico and the Caribbean (excluding
Cuba, Dominican Republic, and Haiti). Products must be purchased in the country where service is requested. If the product or one of its
component parts contains a defect or malfunction during the full warranty period after a reasonable number of attempts by the warrantor
to remedy the defect or malfunction, the owner is entitled to either a refund or replacement of the product or its component part or parts.
Replacement of a component part includes its free installation, except as specifi ed under the limited warranty. Under the terms of this
warranty, service must be performed by a factory authorized AGA Marvel service agent or representative. Service will be provided during
normal business hours, and labor performed at overtime or premium rates shall not be covered by this warranty.
Owner shall be responsible for proper installation, providing reasonable and necessary maintenance, providing proof of purchase upon
request, and making the appliance reasonably accessible for service. The return of the Owner Registration Card is not a condition of warranty
coverage. You should, however, return the Owner Registration Card so that AGA Marvel can contact you should any question of safety arise
which could affect you.
This warranty gives you specifi c legal rights, and you may also have other rights which may vary from jurisdiction to jurisdiction.
WHAT IS NOT COVERED BY THIS WARRANTY: This warranty shall not apply to damage resulting from abuse, failure to provide
reasonable and necessary maintenance, accident, delivery, negligence, natural disaster, loss of electrical power to the product for any reason,
alteration, outdoor use, improper installation, improper operation, or repair or service of the product by anyone other than an authorized
AGA Marvel service agency or representative. This warranty does not apply to commercial usage.
LIMITATION OF REMEDIES AND DURATION OF IMPLIED WARRANTY
OWNER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS PRODUCT SHALL BE THE
REMEDIES SET FORTH ABOVE. AGA Marvel IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGE,
INCLUDING BUT NOT LIMITED TO FOOD OR MEDICINE LOSS, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH
OF WARRANTY, BREACH OF CONTRACT OR OTHERWISE. Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusions may not apply to you. ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF
COVERAGE OF THE APPLICABLE EXPRESS WRITTEN LIMITED WARRANTIES SET FORTH ABOVE. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
WARRANTY SERVICE
To obtain warranty service, contact an authorized service agent, or Preferred Service at 111 Front Street, Greenwood, MS 38930. Provide
model and serial number and date of original purchase or closing date for a new construction. For the name of your nearest authorized AGA
Marvel service agency, call AGA Marvel.
IMPORTANT: Retain proof of original purchase to establish warranty period.
Specifi cations subject to change without notice.
19
061133-000 EN
AGA Marvel
1260 E. VanDeinse St.
Greenville MI 48838
For product information,
call 1-800-(223-3900)
or visit our web site at www.agamarvel.com
(111516)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Marvel MP36BF2LS Le manuel du propriétaire

Catégorie
Congélateurs
Taper
Le manuel du propriétaire