Insignia NS-MCHMRJ9P2 Guide d'installation rapide

Taper
Guide d'installation rapide

Ce manuel convient également à

PACKAGE CONTENTS
• Landline Phone Headset
Quick Setup Guide
FEATURES
CONNECTING YOUR HEADSET
1 Turn down the volume on your headset.
2 Plug the RJ9 connector into the RJ9 Headset Ready
Jack on your phone.
Standard telephone
Dial pad
USING YOUR HEADSET
1 Place your headset on the top of your head (not
around the back).
2 Adjust the reversible boom microphone so that it
is about 1-inch (2.54 cm) from your mouth and
o to one side.
3 Slide the channel switch to another channel if
the headset is not working. Try each channel to
see which one works the best, including volume
level for listening and speaking. Note the correct
channel for future use.
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Landline Phone
Headset
NSMCHMRJ9P2
MUTE
ON
MUTE
ON
MUTE
ON
Cable clip
Mute button
Volume control
Reversable boom
microphone
RJ9 connector
8 channels line switch
V2 ENGLISH 18-0317
4 Begin talking and adjust the volume to a
comfortable level.
Warning: Extended exposure to high volumes when
using your headset may result in permanent hearing
loss.
5 To mute your conversation, press the Mute
button.
LEGAL NOTICES
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Caution: Changes or modications to this unit not
expressly approved by the party responsible for
compliance could void the users authority to
operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment o
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit dierent from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
ICES-003
This Class B digital apparatus complies with
Canadian ICES-003; Cetappareil numérique de la
classe B est conforme à la normeNMB-003 du
Canada.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
MUTE
ON
MUTE
ON
Mute button
MUTE
ON
  • Page 1 1
  • Page 2 2

Insignia NS-MCHMRJ9P2 Guide d'installation rapide

Taper
Guide d'installation rapide
Ce manuel convient également à

dans d''autres langues