Amico A21 Guide d'installation

Taper
Guide d'installation
Installation Guide
1
MRI Compatible
Important Safety Instructions
When using electrical equipment, basic safety precautions should always
be followed including the following:
Read And Follow All Safety Instructions
Directive 2012/19/EU (WEEE - Waste Electrical and Electronic Equipment): Information for Users
This product complies with EU Directive 2012/19/EU. The crossed out wheeled bin symbol on the article means that at the end of its useful lifespan, this product must not be disposed
of with your other household or municipal waste. This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that
could impact health and the environment if not properly disposed. In order to avoid dissemination of those substances in our environment and to diminish the pressure on the natural
resources, the user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information
on available collection facilities contact your local waste collection service or the place of purchase.
Amico Lights Corporation | 122-B East Beaver Creek Road, Richmond Hill, ON L4B 1G6, Canada | www.amico.com
Toll Free Tel: 1.877.462.6426 | Toll Free Fax:1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862
For informational purposes only. Content is subject to change.
A21 - Retrofit LED Lamps
1. Warning: This luminaire must be installed in accordance with the NEC or
your local electrical code. If you are not familiar with these codes and re-
quirements, consult a qualied electrician. Ce produit doit être installé con-
formément à NEC ou votre code électrique local. Si vous n’êtes pas familier
avec ces codes et ces exigences, veuillez contacter un électricien qualié.
2. Warning: This equipment is not for use in hazardous combusble atmo-
spheres as dened by the Naonal Electrical Code.
3. This device is not intended for use with emergency exits. Ne convient pas aux
sores de secours.
Save These Instructions For Future Reference
A21 LED Lamp
Installation:
Recessed Can Installation - New Construction (Wood)
Step 1:
Turn off the power supply.
Step 2:
Screw in the A21 LED Lamp to an apprpriately rated
recessed can or surface luminaire.
Step 3:
Turn on the power supply.
1-07-000019 1-07-000091
ALTINSTALLMRIRETROFITLEDLAMPA21 01.18.2021
  • Page 1 1

Amico A21 Guide d'installation

Taper
Guide d'installation

dans d''autres langues