Amico A21 Guide d'installation

Marque: Amico

Modèle: A21

Taper: Guide d'installation

Installation Guide

MRI Compatible

Important Safety Instructions

When using electrical equipment, basic safety precautions should always

be followed including the following:

Read And Follow All Safety Instructions

Directive 2012/19/EU (WEEE - Waste Electrical and Electronic Equipment): Information for Users

This product complies with EU Directive 2012/19/EU. The crossed out wheeled bin symbol on the article means that at the end of its useful lifespan, this product must not be disposed

of with your other household or municipal waste. This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that

could impact health and the environment if not properly disposed. In order to avoid dissemination of those substances in our environment and to diminish the pressure on the natural

resources, the user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. The separate collection and recycling of your waste

equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information

on available collection facilities contact your local waste collection service or the place of purchase.

Amico Lights Corporation | 122-B East Beaver Creek Road, Richmond Hill, ON L4B 1G6, Canada | www.amico.com

Toll Free Tel: 1.877.462.6426 | Toll Free Fax:1.866.440.4986 | Tel: 905.764.0800 | Fax: 905.764.0862

For informational purposes only. Content is subject to change.

A21 - Retrofit LED Lamps

1. Warning: This luminaire must be installed in accordance with the NEC or

your local electrical code. If you are not familiar with these codes and re-

quirements, consult a qualied electrician. Ce produit doit être installé con-

formément à NEC ou votre code électrique local. Si vous n’êtes pas familier

avec ces codes et ces exigences, veuillez contacter un électricien qualié.

2. Warning: This equipment is not for use in hazardous combusble atmo-

spheres as dened by the Naonal Electrical Code.