LG Electronics GVMRB Manuel utilisateur

Taper
Manuel utilisateur
Car RSE
User Manual
Model Name : GVMRB
Product Name : GVM (Generic Video Module)
(2) Specifications
*Product
1. Overview and Specifications
(1) Overview
1) The GVM (Generic Video Module) operates as a controller to two or more
touch-enabled displays in the rear seat, and/or in the front passenger seat
for infotainment purposes.
2) Utilizing internal An-droid Operating system it allows users to stream media
content from embedded apps, view vehicle information, and interact with HDMI
ports in the front/rear consumer port inputs.
3) The GVM will drive touch display for entertainment, and supports
audio streaming function for BT devices.
(device : BT headphone, BT earphone, BT speaker)
Item Categories Specifications
Specification
Product Name GVM (Generic Video Module)
Model GVMRB
Dimensions Refer to image
Weight 1.0kg
Power Source DC 12V
Operational
Temperature range -40 ℃ ~ 85 ℃
Dimensions : 230.82mm x 122mm x 40.8mm
< Basic Design Concept >
[ Bluetooth ]
*RF specifications
Item Specifications Unit
Frequency 2400 ~ 2483.5 MHz
Modulation Type GFSK, π/4 DQPSK, 8 DPSK
BT Power -2 (MIN.) / 1 (TYP.) / 4 (MAX.) dBm
Data rate 1 ~ 3 Mbps
Channel spacing 1MHz
BT version BT5.0MHz
*Max output power: 4dBm (Maximum average power including tolerance)
*Tolerance: +/- 3dBm
2. Component
Active Area
Item Descriptions
Display & Touch Display for viewing information and
Touch screen for user operation
3. Operation
< Touch Gesture >
Symbol Gesture Description
Tap (Press)
Double tap
Long tap
/ Long press
(Press & Hold)
Flick (Flicking)
Drag & Drop
Pinch & Spread
(only in the browser)
You touch a part of the screen with your
finger and then take the finger off from the
screen
A Double Touch gesture consists two
Touches in quick succession.
A Long Press is performed by touching the
screen and holding that touch location for
some period of time.
You move from one point to the other
point quickly and then take the finger off
from the screen (Factor: direction)
You touch a part of the screen for 1 second
or more while you move and then take the
finger off from the screen
Zoom out/in. Users place the two fingers a
little distance apart on the screen and move
them toward/spread each other without
lifting them from the screen.
< Home Screen >
1) Always operate the vehicle in a safe manner. Do not become distracted by
the vehicle while driving and always be fully aware of all driving conditions.
Do not change settings or any functions. Pull over in a safe and legal
manner before attempting such operations. To promote safety, certain
functions are disabled unless the parking brake is on.
2) To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
3) To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
4) When driving your vehicle, be sure to keep the volume of the unit low
enough to allow you to hear sounds coming from the outside.
5) Do not drop it and avoid heavy impacts at anytime.
6) The driver should not watch the monitor while driving. If the driver
watches the monitor while driving, it may lead to carelessness and cause an
accident.
4. Precautions
Federal Communications Commission(FCC) Statement (FCC Part 15.21)
You are cautioned that changes or modifications not expressly approved by
the part responsible for compliance could void the users authority to
operate the equipment.
FCC Part 15.105
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
-Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.19 Statements
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including
interference that may cause undesired operation of the
device.
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the
users authority to operate the equipment
5. FCC/ISED Statements
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for
an uncontrolled environment. This transmitter must not be co-
located or
operating in conjunction with any other antenna or transmitter.
End users
must follow the specific operating instructions for satisfying RF
exposure
compliance.
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other antenna
or transmitter. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
Responsible Party Information(Supplier'sDeclaration of
Conformity)
LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs New
Jersey, United States, 07632
Contact Number of Information
5.FCC/ISED Statements
Industry Canada Statement
[English]
Industry Canada Statement
(For Canada)
This device complies with Industry Canada’s licence-exempt RSS
Stadard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Avis d'industrie canada
Cet appareil est conforme aux normes CNR d’Industrie Canada
applicables aux dispositifs exempts de licence. Lexploitation est
autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
IC Radiation Exposure Statement
(For Canada)
This equipment complies with IC radiation exposure limits set
forth for an Uncontrolled environment.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
5. FCC/ISED Statements
[French]
Avis d'Industrie Canada
(Pour le Canada)
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. Lexploitation
est autorisée aux deux
conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Avis d’Industrie Canada sur l’exposition aux rayonnements
Avis d'industrie canada
(Pour le Canada)
Cet appareil est conforme aux limites d’exposition aux
rayonnements d’Industrie Canada pour un environnement non
contrôlé.
REMARQUE : LE FABRICANT N’EST PAS RESPONSABLE DES
INTERFÉRENCES RADIOÉLECTRIQUES CAUSÉES PAR DES
MODIFICATIONS NON AUTORISÉES APPORTÉES À CET APPAREIL.
DE TELLES MODIFICATIONS POURRAIENT ANNULER
LAUTORISATION ACCORDÉE À L’UTILISATEUR DE FAIRE
FONCTIONNER LAPPAREIL.
5. FCC/ISED Statements
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

LG Electronics GVMRB Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues