Panasonic Toughbook CF-W8EWEZZAM Operating Instructions Manual

Marque: Panasonic

Modèle: Toughbook CF-W8EWEZZAM

Catégorie: Des cahiers

Taper: Operating Instructions Manual

Ce manuel convient également à

Please read these instructions carefully before using this product, and save this manual for future use.

Contents

Getting Started

Useful Information

Troubleshooting

Getting StartedUseful InformationTroubleshootingAppendix

Appendix

OPERATING INSTRUCTIONS

Personal Computer

Model No. CF-W8 series

Introduction.................................................2

Read Me First ..............................................3

(Precautions)

Description of Parts .....................................11

First-time Operation .....................................13

On-screen Manual.......................................16

Handling and Maintenance.............................17

Expanding Memory......................................20

Intel

Active Management Technology ...............22

Troubleshooting (Basic)/Error Code/Message.......24

Hardware Diagnostics...................................28

Installing Windows Vista................................31

LIMITED USE LICENSE AGREEMENT..............33

Specifications ............................................35

LIMITED WARRANTY ..................................38

For further information about the com-

puter, you can refer to the on-screen

manual.

To access the on-screen manual

 page 16 “On-screen Manual”

For your technical support office, refer to

“LIMITED WARRANTY.”

Getting StartedUseful InformationTroubleshootingAppendix

Introduction

Thank you for purchasing the Panasonic product. For optimum performance and safety, please read these instructions

carefully.

 Terms and illustrations in these instructions

 Some illustrations are simplified to help your understanding and may look different from the actual unit.

 If you do not log on as an administrator, you cannot use some functions or cannot display some screens.

 Refer for the latest information about optional products to the catalogs, etc.

 In these instructions, the names and terms are referred as follows.

• “Microsoft

Windows

XP Professional Service Pack 2 with Advanced Security Technologies” as “Windows” or

“Windows XP”

• “Windows Vista

Business with Service Pack 1” as “Windows” or “Windows Vista”

• “WinDVD™ 8 (OEM Version)” as “WinDVD”

 The display modes are referred as follows. ( ) indicates the terms in [Intel

Graphics Media Accelerator Driver for

mobile] screen. To display the screen, right-click the desktop and click [Graphics Properties].

• Internal LCD (Notebook): The computer’s display

• External display (Monitor): External display

• Simultaneous display (Intel (R) Dual Display Clone): The same screen is displayed on the internal LCD and the

external display.

• Extended Desktop: The extended working area across the internal LCD and the external display.

 Disclaimer

Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability

for damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manu-

als.

 Trademarks

Microsoft

, Windows

, Windows Vista

and the Windows logo are registered trademarks of Microsoft Corporation of

the United States and/or other countries.

Intel, Core, Centrino and PROSet are either registered trademarks or trademarks of Intel Corporation.

SDHC Logo is a trademark.

Adobe, the Adobe logo and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorpo-

rated in the United States and/or other countries.

Bluetooth™ is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Panasonic Corporation.

Corel, InterVideo, WinDVD™, the InterVideo logo and the Corel logo are trademarks or registered trademarks of Corel

Corporation and/or its subsidiaries in Canada, the United States and/or other countries.

Sonic and Roxio are trademarks or registered trademarks of Sonic in the United States and/or other countries.

Computrace

is a registered trademark of Absolute

Software Corp.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective

own companies.

: Conditions that may result in minor or moderate injury.

: Useful and helpful information.

Enter

: Press [Enter] key.

: Press and hold [Fn] key, and then press [F5] key.

[start] - [Run] : Click [start], and then click [Run].

 : Page in these Operating Instructions.

 : Reference to the on-screen manuals.

CAUTION

NOTE

Getting StartedUseful InformationTroubleshootingAppendix

Read Me First

Federal Communications Commission Radio Fre-

quency Interference Statement

Note: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and

receiver.

 Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

 Consult the Panasonic Service Center or an experi-

enced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded inter-

face cables when connecting to a computer or peripheral.

Also, any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)

This device must accept any interference received, includ-

ing interference that may cause undesired operation.

FCC RF Exposure Warning:



This equipment is provided with PC Card slot that could

be used with wireless transmitters, which will be specif-

ically recommended when they become available.

Other third-party wireless transmitters have not been

RF exposure evaluated for use with this computer and

may not comply with FCC RF exposure requirements.

 This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

 This equipment has been approved for portable opera-

tion, and does not require any minimum spacing be

provided between antennas and all person’s body.

 This equipment may not be co-located or operated

with any other antenna or transmitter.

25-M-3

 This PC with WWAN transmitter installed, has been

approved for mobile operation and to assure compli-

ance with RF exposure requirements, a minimum of 20

cm (8 inches) must be maintained between the WWAN

antenna located in top of LCD and all person’s body

(excluding extremities of hands, wrist and feet) during

wireless modes of operation.

 This product is restricted to indoor use due to its oper-

ation in the 5.15 to 5.25 GHz frequency range.

FCC requires this product to be used indoors for the

frequency range 5.15 to 5.25 GHz to reduce the poten-

tial for harmful interference to co-channel Mobile Satel-

lite systems. High power radars are allocated as

primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85

GHz bands. These radar stations can cause interfer-

ence with and /or damage this product.

25-M-W-3

Responsible Party: Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5 (1-800-527-8675)

6-M-1

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

1. This equipment complies with CFR47 Part 68 rules.

On the computer is a label that contains, among other

information, the FCC registration number and ringer

equivalence number (REN) for this equipment. If

required, this information must be provided to the tele-

phone company.

2. An FCC compliant telephone cord and modular plug is

provided with this equipment. This equipment is

designed to be connected to the telephone network or

premises wiring using a compatible modular jack

which is Part 68 compliant. See Installation Instruc-

tions for details.

The REN is used to determine the quantity of devices

which may be connected to the telephone line. Exces-

sive RENs on the telephone line may result in the

devices not ringing in response to an incoming call. In

most, but not all area, the sum of RENs should not

exceed five (5.0). To be certain of the number of

devices that may be connected to a line, as determined

by the total RENs, contact the local telephone company.

4. If your telephone equipment cause harm to the tele-

phone network, the telephone company will notify you

in advice that temporary discontinuance of service

may be required. But if advice notice isn’t practical, the

telephone company will notify the customer as soon as

possible. Also, you will be advised of your right to file a

complaint with the FCC if you believe it is necessary.

5. The telephone company may take changes in its facili-

ties, equipment, operations or procedures that could

affect the operation of the equipment. If this happens

the telephone company will provide advance notice in

order for you to make necessary modifications to

maintain uninterrupted service.

6. If trouble is experienced with this equipment, for repair

or warranty information, please contact Panasonic

Corporation of North America at DIAL TOLL FREE 1-

800-LAPTOP5 (1-800-527-8675). If the equipment is

causing harm to the telephone network, the telephone

company may request that you disconnect the equip-

ment until the problem is resolved.

Models for U.S.A.

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

7. There are no user serviceable parts contained in this

equipment.

8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party

lines is subject to state tariffs.

9. The Telephone Consumer Protection Act of 1991

makes it unlawful for any person to use a computer or

other electronic device to send any message via a

telephone fax machine unless such message clearly

contains in a margin at the top or bottom of each trans-

mitted page or on the first page of the transmission,

the date and time it is sent and an identification of the

business or other entry, or other individual sending the

message and the telephone number of the sending

machine or such business, other entity, or individual. In

order to program this information into your fax soft-

ware, you should refer to the manual of the Fax soft-

ware being used.

10.According to the FCC's electrical safety advisory, we

recommend that you may install an AC surge arrestor

in the AC outlet to which this equipment is connected.

Telephone companies report that electrical surges,

typically lightning transients, are very destructive to

customer terminal equipment connected to AC power

sources and that this is a major nationwide problem.

“Caution : To reduce the risk of fire, use only No.26 AWG or

larger (e.g., 24 AWG) UL listed or CSA certified telecommu-

nication line cord”

“ATTENTION : Pour reduire le risque d’fincendie, utiliser

uniquement des conducteurs de telecommunications 26

AWG ou de section superieure (p.ex. 24 AWG) UL

énumérés ou CSA certifié.”

16-M-1

Notice for the products using LCD

This product has a fluorescent lamp that contains mer-

cury. Disposal may be regulated in your community due to

environmental considerations.

For disposal or recycling information, please contact your

local authorities, or the Electronic Industries Alliance:

<www.eiae.org/>

24-M-1

The following safety precautions must be observed during all phases of the operation, usage, service or repair of any

Personal Computer or Handheld Computer incorporating Wireless WAN. Manufacturers of the cellular terminal are

advised to convey the following safety information to users and operating personnel and to incorporate these guidelines

into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design,

manufacture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these

precautions.

When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch

Personal Computer or Handheld Computer incorporating Wireless WAN off, if instructed to do so by the

guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy. The operation of

cardiac pacemakers, other implanted medical equipment and hearing aids can be affected by interference

from Personal Computer or Handheld Computer incorporating Wireless WAN placed close to the device. If in

doubt about potential danger, contact the physician or the manufacturer of the device to verify that the

equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or

Handheld Computer incorporating Wireless WAN away from the pacemaker, while it is on.

Switch off Personal Computer or Handheld Computer incorporating Wireless WAN before boarding an

aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft

is forbidden to prevent interference with communications systems. Failure to observe these instructions may

lead to the suspension or denial of cellular services to the offender, legal action, or both.

Do not operate Personal Computer or Handheld Computer incorporating Wireless WAN in the presence of

flammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots,

chemical plants or where blasting operations are in progress. Operation of any electrical equipment in

potentially explosive atmospheres can constitute a safety hazard.

Your Personal Computer or Handheld Computer incorporating Wireless WAN receives and transmits radio

frequency energy while switched on. Remember that interference can occur if it is used close to TV sets,

radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off

Personal Computer or Handheld Computer incorporating Wireless WAN wherever forbidden, or when you

suspect that it may cause interference or danger.

This product contains a CR Coin Cell Lithium Bat-

tery which contains Perchlorate Material- special

handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate/

38-M-1

Safety Precautions

Getting StartedUseful InformationTroubleshootingAppendix

Road safety comes first! Do not use a Personal Computer or Handheld Computer incorporating Wireless

WAN while driving a vehicle. Do not place the computer with Wireless WAN in an area where it could cause

personal injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage

area while driving. Do not place the computer with Wireless WAN in an area over an air bag or in the vicinity

where an air bag may deploy. Air bags inflate with great force and if the computer with Wireless WAN is

placed in the air bag deployment area may be propelled with great force and cause serious injury to

occupants of the vehicle.

IMPORTANT!

Personal Computer or Handheld Computer incorporating Wireless WAN operate using radio signals and

cellular networks cannot be guaranteed to connect in all conditions. Therefore, you should never rely solely

upon any wireless device for essential communications, for example emergency calls.

Remember, in order to make or receive calls, Personal Computer or Handheld Computer incorporating

Wireless WAN must be switched on and in a service area with adequate cellular signal strength.

Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g.

lock functions, fixed dialing etc.). You may need to deactivate those features before you can make an

emergency call.

Some networks require that a valid SIM card be properly inserted in Personal Computer or Handheld

Computer incorporating Wireless WAN.

27-1-2

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved

modem unit.

The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHEMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified equip-

ment. This certification means that the equipment meets tele-

communications network protective, operational and safety

requirements as prescribed in the appropriate Terminal Equip-

ment Technical Requirements document(s). The Department

does not guarantee the equipment will operate to the user’s

satisfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local tele-

communications company. The equipment must also be

installed using an acceptable method of connection. The cus-

tomer should be aware that compliance with the above condi-

tions may not prevent degradation of service in some

situations.

Repairs to certified equipment should be coordinated by a rep-

resentative designated by the supplier. Any repairs or alter-

ations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company

cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical

ground connections of the power utility, telephone lines and

internal metallic water pipe system, if present, are connected

together. This precaution may be particularly important in rural

areas. Caution: Users should not attempt to make such con-

nections themselves, but should contact the appropriate elec-

tric inspection authority, or electrician, as appropriate.”

“NOTICE: The Ringer Equivalence Number (REN) assigned to

each terminal device provides an indication of the maximum

number of terminals allowed to be connected to a telephone

interface. The termination on an interface may consist of any

combination of devices subject only to the requirement that the

sum of the Ringer Equivalence Numbers of all the devices

does not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT

DE MATÉRIEL

“AVIS: L’étiquette d’Industrie Canada identifie le matériel

homologué. Cette étiquette certifie que le matériel est con-

forme aux normes de protection, d’exploitation et de sécurité

des réseaux de télécommunications, comme le prescrivent les

documents concernant les exigences techniques relatives au

matériel terminal. Le Ministère n’assure toutefois pas que le

matériel fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est

permis de le raccorder aux installations de l’entreprise locale

de télécommunication. Le matériel doit également être installé

en suivant une méthode acceptée de raccordement.

L’abonné ne doit pas oublier qu’il est possible que la confor-

mité aux conditions énoncées ci-dessus n’empêche pas la

dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent être coordon-

nées par un représentant désigné par le fournisseur.

L’entreprise de télécommunications peut demander à l’utili-

sateur de débrancher un appareil à la suite de réparations ou

de modifications effectuées par l’utilisateur ou à cause de

mauvais fonctionnement.

Pour sa propre protection, l’utilisateur doit s’assurer que tous

les fils de mise à la terre de la source d’énergie électrique, des

lignes téléphoniques et des canalisations d’eau métalliques,

s’il y en a, sont raccordés ensemble. Cette précaution est par-

ticulièrement importante dans les régions rurales. Avertisse-

ment: L’utilisateur ne doit pas tenter de faire ces

raccordements lui-même; il doit avoir recours à un service

d’inspection des installations électriques, ou à un électricien,

selon le cas.”

“AVIS: L’indice d’équivalence de la sonnerie (IES) assigné à

chaque dispositif terminal indique le nombre maximal de ter-

minaux qui peuvent être raccordés à une interface. La termi-

naison d’une interface téléphonique peut consister en une

combinaison de quelques dispositifs, à la seule condition que

la somme d’indices d’équivalence de la sonnerie de touts les

dispositifs n’excède pas 5.”

IES: Voir sous le fond de l’ordinateur

17-Ca-1

Models for Canada

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

Canadian ICES-003

This Class B digital apparatus complies with Canadian

ICES-003.

Cet appareil numérique de la classe B est conforme à la

norme NMB-003 du Canada.

7-M-2

Industry Canada

Operation is subject to the following two conditions;

(1) this device may not cause interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation of

the device.

30-Ca-1-1

This product (local network devices) for the band 5150-

5250 MHz is only indoor usage to reduce potential for

harmful interference to co-channel Mobile Satellite sys-

tems.

High power radars are allocated as primary users (mean-

ing they have priority) of 5250-5350 MHz and 5650-5850

MHz and these radars could cause interference and/or

damage to LELAN devices.

30-Ca-2-1

Declaration of Conformity (DoC)

“Hereby, Panasonic Corporation declares that this Personal Computer is in compliance with the

essential requirements and other relevant provisions of the Directive 1999/5/EC.”

Hint:

If you want to get a copy of the original DoC of our above mentioned products, please contact our

web address: http://www.doc.panasonic.de

Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Network connection of Wired Modem.

The terminal equipment is intended for connection to the following public network;

In all the countries of European Economical Area;

- Public Switched Telephony Networks

Technical Features of Wired Modem.

The terminal equipment includes the following features;

- DTMF dialing

- Maximum bitrate receiving mode: 56 kbit/s

- Maximum bitrate sending mode: 33.6 kbit/s

18-E-1

When using your telephone equipment, basic safety pre-

cautions should always be followed to reduce the risk of

fire, electric shock and injury to persons, including the fol-

lowing:

1. Do not use this product near water, for example, near

a bath tub, wash bowl, kitchen sink or laundry tub, in a

wet basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote risk

of electric shock from lightning.

3. Do not use the telephone to report a gas leak in the

vicinity of the leak.

4. Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a fire. They may

explode. Check with local codes for possible special

disposal instructions.

SAVE THESE INSTRUCTIONS

19-E-1

Certaines mesures de sécurité doivent être prises pen-

dant l’utilisation de matérial téléphonique afin de réduire

les risques d’incendie, de choc électrique et de blessures.

En voici quelquesunes:

1. Ne pas utiliser l’appareil près de l’eau, p.ex., près d’une

baignoire, d’un lavabo, d’un évier de cuisine, d’un bac à

laver, dans un sous-sol humide ou près d’une piscine.

2. Éviter d’utiliser le téléphone (sauf s’il s’agit d’un appareil

sans fil) pendant un orage électrique. Ceci peut présenter

un risque de choc électrique causé par la foudre.

3. Ne pas utiliser l’appareil téléphonique pour signaler

une fuite de gaz s’il est situé près de la fuite.

4. Utiliser seulement le cordon d’alimentation et le type de

piles indiqués dans ce manual. Ne pas jeter les piles

dans le feu: elles peuvent exploser. Se conformer aux

règlements pertinents quant à l’élimination des piles.

CONSERVER CES INSTRUCTIONS

19-F-1

Models for Europe

Important Safety Instructions / Importantes Mesures De Sécurité

Getting StartedUseful InformationTroubleshootingAppendix

This product and your Health

This product, like other radio devices, emits radio fre-

quency electromagnetic energy. The level of energy emit-

ted by this product however is far much less than the

electromagnetic energy emitted by wireless devices like

for example mobile phones.

Because this product operates within the guidelines found

in radio frequency safety standards and recommenda-

tions, we believe this product is safe for use by consum-

ers. These standards and recommendations reflect the

consensus of the scientific community and result from

deliberations of panels and committees of scientists who

continually review and interpret the extensive research lit-

erature.

In some situations or environments, the use of this prod-

uct may be restricted by the proprietor of the building or

responsible representatives of the organization. These sit-

uations may for example include:

 Using this product on board of airplanes, or

 In any other environment where the risk of interference

to other devices or services is perceived or identified

as harmful.

If you are uncertain of the policy that applies on the use of

wireless devices in a specific organization or environment

(e.g. airports), you are encouraged to ask for authoriza-

tion to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interfer-

ence caused by unauthorized modification of this product.

The correction of interference caused by such unautho-

rized modification will be the responsibility of the user. We

and its authorized resellers or distributors are not liable for

damage or violation of government regulations that may

arise from failing to comply with these guidelines.

26-M-1

<Uniquement les modèles avec réseau local sans fil,

seau large sans fil et/ou Bluetooth>

Ce produit et votre santé

Ce produit, comme tout autre appareil radio, émet de l’éner-

gie radioélectrique. Toutefois, la quantité d’énergie émise par

ce produit est beaucoup moins importante que l’énergie

radioélectrique émise par des appareils sans fil tels que les

téléphones portables. L’utilisation de ce produit ne comporte

aucun risque pour le consommateur du fait que cet appareil

opère dans les limites des directives concernant les normes

et les recommandations de sécurité sur les fréquences radio.

Ces normes et recommandations reflètent le consensus de

la communauté scientifique et résultent de délibérations de

jurys et comités de scientifiques qui examinent et interprètent

continuellement les nouveautés de la vaste littérature sur les

recherches effectuées. Dans certaines situations ou environ-

nements, l’utilisation de ce produit peut être restreinte par le

propriétaire du bâtiment ou par les représentants respons-

ables de l’organisation. Ces situations peuvent être les suiv-

antes par exemple :

 A bord d’un avion, ou

 Dans tout autre environnement où les risques d’inter-

férence sur d’autres appareils ou services sont perçus

ou identifiables comme dangereux.

Si vous n’êtes pas sûr de la réglementation applicable à

l’utilisation d’appareils sans fil dans une organisation ou

un environnement spécifique, (par exemple dans un

aéroport) nous vous invitons à demander l’autorisation

d’utiliser ce produit avant sa mise en marche.

Informations concernant la réglementation

Nous déclinons toute responsabilité pour toute interférence

radio ou télévision causée par des modifications non

autorisées apportées à ce produit. La correction d’inter-

férences causées par de telles modifications non autorisées

sera la seule responsabilité de son utilisateur. Nousmêmes, les

revendeurs officiels et les distributeurs ne sommes pas respon-

sable de tout dégât ou de toute violation des règlements de

l’État pouvant découler du non-respect de ces directives.

26-F-1

Lithium Battery!

This computer contains a lithium battery to enable the

date, time, and other data to be stored. The battery should

only be exchanged by authorized service personnel.

Warning! A risk of explosion from incorrect installation or

misapplication may possibly occur.

15-E-1

Pile au lithium!

Le micro-ordinateur renferme une pile au lithium qui per-

met de sauvegarder certaines données, notamment la

date et l’heure. La pile ne doit être remplacée que par un

technicien qualifié.

Danger ! Risque d’explosion en cas de non respect de

cette mise en garde!

15-F-1

Information to the User / Informations destinées aux utilisateurs

Lithium Battery / Pile au lithium

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

12-E-1

AVERTISSEMENT!

CET APPAREIL UTILISE UN LASER.

L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L’EXÉCU-

TION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEU-

VENT PROVOQUER UNE EXPOSITION À DES RADIATIONS

DANGEREUSES.

NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER

SOIMÊME.

CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL QUALIFIÉ.

12-F-1

12-1-1

These symbols are only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask

for the correct method of disposal.

53-M-1

If a Malfunction or Trouble Occurs, Immediately Stop

Use

If a Malfunction Occurs, Immediately Unplug the AC

Plug (and the Battery Pack)

• This product is damaged

• Foreign object inside this product

• Smoke emitted

• Unusual smell emitted

• Unusually hot

Continuing to use this product while any of the above con-

ditions are present may result in fire or electric shock.

• If a malfunction or trouble occurs, immediately turn the

power off and unplug the AC plug(, and then remove the

battery pack). Then contact your technical support office

for repair.

Do Not Touch This Product and Cable When It Starts

Thundering

Electric shock may result.

Do Not Connect the AC Adaptor to a Power Source

Other Than a Standard Household AC Outlet

Otherwise, a fire due to overheating may result. Connect-

ing to a DC/AC converter (inverter) may damage the AC

adaptor. On an airplane, only connect the AC adaptor/

charger to an AC outlet specifically approved for such use.

CD/DVD Drive Caution

Information on Disposal in other Countries outside the European Union

Precautions

THIS PRODUCT IS NOT INTENDED FOR USE AS,

OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS,

AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS,

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS

MEDICAL DEVICES OR ACCESSORIES

, LIFE

SUPPORT SYSTEMS OR OTHER EQUIPMENTS/

DEVICES/SYSTEMS THAT ARE INVOLVED WITH

ENSURING HUMAN LIFE OR SAFETY. PANASONIC

WILL NOT BE RESPONSIBLE FOR ANY LIABILITY

RESULTING FROM THE USE OF THIS PRODUCT

ARISING OUT OF THE FOREGOING USES.

AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS

include Class2 Electrical Flight Bag (EFB) Systems

and Class1 EFB Systems when used during critical

phases of flight (e.g., during takeoff and landing)

and/or mounted on to the aircraft. Class1 EFB Sys-

tems and 2 EFB Systems are defined by FAA: AC

(Advisory Circular) 120-76A or JAA: JAA TGL (Tem-

porary Guidance Leaflets) No.36.

As defined by the European Medical Device Direc-

tive (MDD) 93/42/EEC. Panasonic cannot guaran-

tee any specifications, technologies, reliability,

safety (e.g. Flammability/Smoke/Toxicity/Radio Fre-

quency Emission, etc) requirements related to avia-

tion standards and medical equipment standards

that differ from the specifications of our COTS

(Commercial-Off-The-Shelf) products.

Getting StartedUseful InformationTroubleshootingAppendix

Do Not Do Anything That May Damage the AC Cord,

the AC Plug, or the AC Adaptor

Do not damage or modify the cord, place it near hot tools,

bend, twist, or pull it forcefully, place heavy objects on it,

or bundle it tightly.

Continuing to use a damaged cord may result in fire, short

circuit, or electric shock.

Do Not Pull or Insert the AC Plug If Your Hands Are Wet

Electric shock may result.

Clean Dust and Other Debris of the AC Plug Regularly

If dust or other debris accumulates on the plug, humidity,

etc. may cause a defect in the insulation, which may result

in a fire.

• Pull the plug, and wipe it with a dry cloth.

Pull the plug if the computer is not being used for a long

period of time.

Insert the AC Plug Completely

If the plug is not inserted completely, fire due to overheat-

ing or electric shock may result.

• Do not use a damaged plug or loose AC outlet.

Do Not Place Containers of Liquid or Metal Objects on

Top of This Product

If water or other liquid spills, or if paper clips, coins, or for-

eign matter get inside this product, fire or electric shock

may result.

• If water spills in the keyboard, refer to page 19. If foreign

matter has found its way inside, immediately turn the

power off and unplug the AC plug and remove the bat-

tery pack. Then contact your technical support office.

Do Not Disassemble This Product

The high-voltage areas inside may give you an electric

shock, or foreign matter may enter and result in a fire.

Keep SD Memory Cards Away from Infants and Small

Children

Accidental swallowing will result in bodily injury.

• In the event of accidental swallowing, see a doctor

immediately.

Do Not Place This Product on Unstable Surfaces

If balance is lost, this product may fall over or drop, result-

ing in an injury.

Avoid Stacking

If balance is lost, this product may fall over or drop, result-

ing in an injury.

Do Not Keep This Product Wherever There is a Lot of

Water, Moisture, Steam, Dust, Oily Vapors, etc.

Otherwise, possibly resulting in fire or electric shock.

Do Not Leave This Product in High Temperature Envi-

ronment for a Long Period of Time

Leaving this product where it will be exposed to extremely

high temperatures such as near fire or in direct sunlight

may deform the cabinet and/or cause trouble in the inter-

nal parts. Continued use in such a resulting condition may

lead to short-circuiting or insulation defects, etc. which

may in turn lead to a fire or electric shocks.

Do Not Block the Ventilation Hole

Otherwise, heat will build up inside, possibly resulting in a fire.

Hold the Plug When Unplugging the AC Plug

Pulling on the cord may damage the cord, resulting in a

fire or electric shock.

Do Not Move This Product While the AC Plug Is Con-

nected

The AC cord may be damaged, resulting in fire or electric

shock.

• If the AC cord is damaged, unplug the AC plug immedi-

ately.

Use Only the Specified AC Adaptor With This Product

Using an AC adaptor other than the one supplied (sup-

plied with the unit or one sold seperately as an accessory)

may result in a fire.

Do Not Subject the AC Adaptor to Any Strong Impact

Using the AC adaptor after a strong impact such as being

dropped may result in electric shock, short circuit, or fire.

Take a Break of 10-15 Minutes Every Hour

Using this product for long periods of time may have detri-

mental health effects on the eyes or hands.

Do Not Look into the CD/DVD Drive

Looking directly at the internal laser light source may

result in damage to eyesight.

Do Not Use Discs That Are Cracked or Deformed

Because the discs rotate at high speeds, damaged discs

may break apart causing injury.

• Discs that are not round and discs that have been

repaired using adhesives are similarly dangerous, and

so should not be used.

Do Not Turn the Volume Up to Loud When Using

Headphones

Listening at high volumes that overstimulate the ear for

long periods of time may result in loss of hearing.

Use the Modem with a Regular Telephone Line

Connection to an internal phone line (on-premise

switches) of a company or business office, etc. or to a dig-

ital public phone or use in a country or area not supported

by the computer may result in a fire or electric shocks.

Do Not Connect a Telephone Line, or a Network Cable

Other Than the One Specified, into the LAN Port

If the LAN port is connected to a network such as the

ones listed below, a fire or electric shock may result.

• Networks other than 1000BASE-T, 100BASE-TX or

10BASE-T

• Phone lines (IP phone (Internet Protocol Telephone),

Telephone lines, internal phone lines (on-premise

switches), digital public phones, etc.)

Do Not Use with Exposing the Skin to This Product

for a Long Period of Time

Using this product with exposing the skin to the heat

source of this product or AC adaptor for a long period of

time can cause a low-temperature burn.

 Do not place the computer near a television or radio

receiver.

 Keep the computer away from magnets. Data stored

on the hard disk may be lost.

 This computer is not intended for the display of images

for use in medical diagnosis.

 This computer is not intended for a use with connec-

tion of medical equipment for the purpose of medical

diagnosis.

 Panasonic shall not be liable for loss of data or other

incidental or consequential damages resulting from the

use of this product.

Read Me First

Getting StartedUseful InformationTroubleshootingAppendix

Do Not Use with Any Other Product

The battery pack is rechargeable and was intended for

the specified product. If it is used with a product other

than the one for which it was designed, electrolyte leak-

age, generation of heat, ignition or rupture may result.

Do Not Charge the Battery Using Methods Other Than

Those Specified

If the battery is not charged using one of the specified

methods, electrolyte leakage, generation of heat, ignition

or rupture may result.

Do Not Throw the Battery Pack into a Fire or Expose It

to Excessive Heat

Generation of heat, ignition or rupture may result.

Avoid Extreme Heat (Near the Fire, in Direct Sunlight,

for Example)

Electrolyte leakage, generation of heat, ignition or rupture

may result.

Do Not Insert Sharp Objects into the Battery Pack,

Expose It to Bumps or Shocks, Disassemble, or Modify It

Electrolyte leakage, generation of heat, ignition or rupture

may result.

• If this product is subjected to a strong impact, stop using

it immediately.

Do Not Short the Positive (+) and Negative (-) Contacts

Generation of heat, ignition or rupture may result.

• Do not place the battery pack together with articles such as

necklaces or hairpins when carrying or storing.

Do Not Use This Product with a Battery Pack Other

Than the One Specified

Use only the specified battery pack (CF-VZSU51W/CF-

VZSU52W) with your product. Use of battery packs other than

those manufactured and supplied by Panasonic may present

a safety hazard (generation of heat, ignition or rupture).

When the Battery Pack Has Deteriorated, Replace It

with a New One

Continued use of a damaged battery pack may result in

heat generation, ignition or battery rupture.

 Do not touch the terminals on the battery pack. The

battery pack may no longer function properly if the

contacts are dirty or damaged.

 Do not expose the battery pack to water, or allow it to

become wet.

 If the battery pack will not be used for a long period of

time (a month or more), charge or discharge (use) the

battery pack until the remaining battery level becomes

30% to 40% and store it in a cool, dry place.

 This computer prevents overcharging of the battery by

recharging only when the remaining power is less than

approx. 95% (when Economy Mode (ECO) is enabled:

75%) of capacity.

 The battery pack is not charged when the computer is

first purchased. Be sure to charge it before using it for

the first time. When the AC adaptor is connected to the

computer, charging begins automatically.

 Should the battery leak and the fluid get into your

eyes, do not rub your eyes. Immediately flush your

eyes with clear water and see a doctor for medical

treatment as soon as possible.

NOTE



The battery pack may become warm during recharg-

ing or normal use. This is completely normal.

 Recharging will not commence if internal tempera-

ture of the battery pack is outside of the allowable

temperature range (0 °C to 55 °C {32 °F to

131 °F}). ( Reference Manual “Battery

Power”) Once the allowable range requirement is

satisfied, charging begins automatically. Note that

the recharging time varies based on the usage

conditions. (Recharging takes longer than usual

when the temperature is 10 °C {50 °F} or below.)



In high-temperature environments, the battery takes

longer to fully recharge. In low-temperature environ-

ments, the battery takes longer to fully recharge and

the operating time is shorter. Only use the computer

within the allowable temperature range.

 The battery pack is a consumable item. If the

amount of time the computer can be run by using a

particular battery pack becomes dramatically

shorter and repeated recharging does not restore

its performance, the battery pack should be

replaced with a new one.



When transporting a spare battery inside a package,

briefcase, etc., it is recommended that it be placed in

a plastic bag so that its contacts are protected.

 Always power off the computer when it is not in

use. Leaving the computer on when the AC adap-

tor is not connected will exhaust the remaining bat-

tery capacity.

Precautions (Battery Pack)

CAUTION:

Risk of Explosion if Battery is replaced by an Incorrect Type.

Dispose of Used Batteries According to the Instructions.

58-E-1

A lithium ion battery that is recy-

clable powers the product you

have purchased.

Please call 1-800-8-BATTERY

for information on how to recycle

this battery.

L’appareil que vous vous êtes

procuré est alimenté par une bat-

terie au lithium-ion.

Pour des renseignements sur le

recyclage de la batterie, veuillez

composer le 1-800-8-BATTERY.

48-M-1

Getting StartedUseful InformationTroubleshootingAppendix

Description of Parts

A :Function Key

 Reference Manual “Key Combinations”

B :Keyboard

C :Touch Pad

 Reference Manual “Using the Touch Pad”

D :Bluetooth Antenna

 Reference Manual “Bluetooth”

E : Wireless LAN Antenna

 Reference Manual “Wireless LAN”

F : Power Switch

 page 14

Power Indicator

• Off: Power off/Hibernation

•Green: Power on

• Blinking green: Standby

G :Wireless Switch

Switch the wireless devices to on (right side) or to off (left side).

 Reference Manual “Disabling/Enabling Wire-

less Communication”

H :LED Indicator

: SD/SDHC Memory Card status

: Caps lock

: Numeric key (NumLk)

: Scroll lock (ScrLk)

: Hard disk drive status

ECO

: Economy Mode (ECO) status

 Reference Manual “Battery Power”

: Battery status

 Reference Manual “Battery Power”

: CD/DVD drive status

• Off: Drive power is off.

• Green: Drive power is on, but the drive is not

accessed.

• Blinking green: Drive power is on, and the

drive is being accessed.

I : LCD

J : Security Lock

You can connect a Kensington cable. Refer to the instruc-

tion manual of the cable. The security lock and cable is a

theft prevention device. Panasonic Corporation will bear

no responsibility in the event of theft.

K :Modem Port

• Be sure to use the included modem telephone cable,

and insert the ferrite core side of modem telephone

cable into the modem port on the computer

• Do not move/remove the ferrite core of modem tele-

phone cable.

 Reference Manual “Modem”

L : LAN Port

If the Mini Port Replicator is connected to the computer,

connect the LAN cable to the LAN port on the Mini Port

Replicator. You cannot use the LAN port on the computer.

 Reference Manual “LAN”

M :USB Ports

 Reference Manual “USB Devices”

N :CD/DVD Drive

 Reference Manual “CD/DVD Drive”

CAUTION

When closing the disc

cover, press down the disc

cover (position of the

arrow) to ensure that the

cover is locked.

90 mm {3.5 "} or less

Getting Started

Description of Parts

EXT.

A :DC-IN Jack

B :External Display Port

If the Mini Port Replicator is connected to the com-

puter, connect the external display to the external dis-

play port on the Mini Port Replicator. You cannot use

the external display port on the computer.

 Reference Manual “External Display”

C :Mini Port Replicator Connector

Connect the Mini Port Replicator (optional).

 Reference Manual “Mini Port Replicator”

D :Ventilation Hole

E : PC Card Slot

 Reference Manual “PC Cards”

F : SD Memory Card Slot

 Reference Manual “SD/SDHC Memory Card”

G :CD/DVD Drive Power/Open Switch

• Slide the switch to the right to open the disc cover.

• Slide the switch to the left to turn on/off the drive power.

H :Microphone Jack

A condenser microphone can be used. If other types

of microphones are used, audio input may not be pos-

sible, or malfunctions may occur.

•

When recording in stereo using a stereo microphone: Click

[start] - [All Programs] - [SoundMAX] - [Control Panel] and

select [Microphone], and then select [No Filtering] in [Micro-

phone Enhancements].

•

When using a monaural microphone with a 2-terminal plug:

Click [start] - [All Programs] - [SoundMAX] - [Control Panel]

and select [Microphone], and then select [Voice Recording] in

[Microphone Enhancements]. Otherwise only audio on the left

track will be heard when recorded in stereo.

I : Headphone Jack

You can connect headphones or amplified speakers.

When they are connected, audio from the internal

speakers is not heard.

J : Battery Latches

 page 13

K :Battery Pack

 page 13

 Reference Manual “Battery Power”

L : RAM Module Slot

 page 20

M :Speaker

N :Emergency Hole

 Reference Manual “CD/DVD Drive”

SIM Card Slot

Wireless WAN Antenna

Getting StartedUseful InformationTroubleshootingAppendix

First-time Operation

 Preparation

A Check and identify the supplied accessories.

If you do not find the described accessories, contact your technical support office.

B Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging

( page 33).

Slide the battery pack in parallel with the arrow direction and attach it so that the

left and right projections on the new battery pack match the dents of the com-

puter.

In case that the projection does not match the dents of the computer, detach the

battery pack once, then slide it while pushing it lightly to avoid floating.

 To remove

Slide both the left and right latches to the unlocked

position, and push out the battery pack in parallel with

the computer.

CAUTION

 Make sure the latches are securely locked. Otherwise the battery pack may fall

when you carry the computer.

 Do not touch the terminals of the battery pack and the computer. Doing so can

make the terminals dirty or damaged, and may cause malfunction of the battery

pack and the computer.

Hold the side of the computer with either of your hands and then hold and lift the

(A) part to open the display.

 Be careful not to press the SIM card slot cover (B) by mistake.

CAUTION

 Do not open the display wider than necessary (140° or more), and do not apply

excessive pressure to the LCD. Do not open or close the computer holding the

edge of the LCD segment.

• AC Adaptor . . . . 1

Model No: CF-AA1633A

• AC Cord . . . . . . 1 • Battery Pack . . .1

Model No: CF-VZSU51W

• Modem Telephone Cable . . . 1

• Operating Instructions (This book) . . . . . . . . . . . . . . . . . . . . . . . . .1

• Product Recovery DVD-ROM Windows Vista

Business SP 1 . .1

1 Insert the battery pack.

Battery

Latches

2 Open the display.

Getting Started

First-time Operation

The battery charging starts automatically.

CAUTION

 Do not disconnect the AC adaptor and do not switch the wireless switch to

on until the first-time operation procedure is completed.

 When using the computer for the first time, do not connect any peripheral device

except the battery pack and AC adaptor.

 Handling the AC adaptor

• Problems such as sudden voltage drops may arise during periods of thunder and

lightning. Since this could adversely affect your computer, an uninterruptible power

source (UPS) is highly recommended unless running from the battery pack alone.

Slide and hold the power switch for approximately one second until the

power indicator lights.

CAUTION

 Do not slide the power switch repeatedly.

 The computer will forcibly be turned off if you slide and hold the power switch for

four seconds or longer.

 Once you turn off the computer, wait for ten seconds or more before you turn on

the computer again.



Do not perform the following operation until the hard disk drive indicator turns off.

• Connecting or disconnecting the AC adaptor

• Sliding the power switch or CD/DVD drive power/open switch

• Touching the keyboard or touch pad

• Closing the display

 Do not change the Setup Utility until completing step 5. If you do so, Windows

setup may not operate properly.

Follow the on-screen instructions.

 The computer will restart after the setup is complete.

To go to the next step, wait until the hard disk drive indicator has turned

off.

CAUTION

 Do not turn off the computer until completing the first-time operation procedure.

 When you set date/time/time zone and click [Next], the screen may not go to the

next step for a few minutes. Do not touch the keyboard or touch pad, and wait

until the screen changes.

 If “An unexpected error has occurred ...” (or a similar message) is displayed,

click [OK]. This is not a malfunction.

Click [start] - [Control Panel] - [User Accounts] - [Create a new account].

CAUTION



Remember your password. If you forget the password, you cannot use the Windows

operation system. Creating a password reset disk beforehand is recommended.

 Reference Manual “CD/DVD Drive”

3 Connect your computer to a power outlet.

4 Turn on the computer.

5 Setup Windows.

6 Create a new account.

7 Change the internal CD/DVD drive letter if necessary.

Getting StartedUseful InformationTroubleshootingAppendix

NOTE

 Regarding Windows XP

You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs

on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).

 Windows Update

You can update to the latest patches and service packs for Windows with the following menus.

[start] - [All Programs] - [Windows Update]

Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required,

contact your technical support office.

 If the message “Your computer might be at risk” is displayed

Select (red icon) on the notification area and make the appropriate settings. The Windows Security Center reg-

ularly gives you notice so that you can make the optimum settings. This is not an error message and you can use the

computer. However, making appropriate measures is recommended to reduce the risk of virus and other attacks.

 PC Information Viewer

This computer periodically records the management information of the hard disk, etc. The maximum data volume for

each record is 1024 bytes. This information is only used for estimating the cause when the hard disk goes down by

any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose

described the above.

To disable the function, add the check mark for [Disable the automatic save function for management information

history] in [Hard Disk Status] of PC Information Viewer, and click [OK].

When you disable the function, information on how to use the hard disk of PC Information Popup is not displayed.

( Reference Manual “Check the Computer’s Usage Status” and “PC Information Popup”)

 If you hear the sounds from CD/DVD drive

In the following situations, the sounds from the CD/DVD drive can be heard.

• Immediately after the CD/DVD drive is turned on

• Just after turning on the computer with [Optical Drive Power] set to [On] in the Setup Utility

• When a CD or DVD is playing

The sounds you hear are normal operating sounds created by the motor in the CD/DVD drive operating; it is not a

malfunction.

 To conserve power, the following power saving methods are set at the time of purchase. (When AC adaptor

is connected)

• The screen automatically turns off after 15 minutes of inactivity.

• The computer automatically enters standby

after 20 minutes of inactivity.

Refer to Reference Manual “Standby or Hibernation Functions” about resuming from standby.

 Power consumption in each mode is as follows. (When AC adaptor is connected)

• When the screen is off Approx. 9 W

• In standby Approx. 2.2 W

• The battery pack is fully charged (or not being charged) and the computer is off Approx. 0.9 W

 Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.5 W) simply by

having the AC adaptor plugged into an AC outlet. (When using with 115 V AC)

 Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully

charged, the battery will be fully discharged in the following period of time:

If “Wake Up from wired LAN” is disabled, the period of time will become slightly longer.

If “Wake Up from wireless LAN” is enabled, the period of time will become shorter.



When the CD/DVD drive power is turned off, the message “The ‘Standard Dual Channel PCI IDE Controller’ device

can now be safely removed from the system” will appear, but the CD/DVD drive is an internal device, so it cannot

be removed.

 When Starting Up/Shutting Down

 Do not do the following

• Connecting or disconnecting the AC adaptor

• Sliding the power switch or CD/DVD drive power/open switch

• Touching the keyboard, touch pad or external mouse

• Closing the display

When using the supplied battery pack (CF-VZSU51W) When using the optional battery pack (CF-VZSU52W)

• In standby: Approx. 3 days (If “Wake Up from wired

LAN” is enabled: 2 days)

• In hibernation: Approx.1.5 months (If “Wake Up

from wired LAN” is enabled: 3 days)

• When power is off: Approx. 1.5 months (If “Power

On by wired LAN” is enabled: 3 days)

• In standby: Approx. 1.5 days (If “Wake Up from

wired LAN” is enabled: 1 days)

• In hibernation: Approx. 0.7 months (If “Wake Up

from wired LAN” is enabled: 1.5 days)

• When power is off: Approx. 0.7 months (If “Power

On by wired LAN” is enabled: 1.5 days)

Getting StartedUseful InformationTroubleshootingAppendix

On-screen Manual

You can access the following manuals on the computer screen after completing the “First-time Operation”.

When you access the on-screen manual for the first time, the License Agreement of the Adobe Reader may be dis-

played. Read it carefully and select [Accept] to proceed.

 Reference Manual

The Reference Manual contains the practical information to help you fully enjoy the computer’s performance.

To access the Reference Manual:

Click [start] - [Reference manual].

 Important Tips

The Important Tips will provide you with the helpful information about the battery. Read to use the battery pack in the

optimum condition to obtain longer operation time.

To access the Important Tips:

Double-click on the desktop.

 Alternatively click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Important Tips].

 Hard Disk Handling

The Hard Disk Handling will provide you with the helpful information on how to use the hard disk.

To access the Hard Disk Handling:

Click [start] - [All Programs] - [Panasonic] - [On-Line Manuals] - [Hard Disk Handling].

NOTE

 When Adobe Reader update notice is displayed, we recommend you follow the on-screen procedure to update.

See http://www.adobe.com/ for the latest version of Adobe Reader.

Contents

 Read Me First

 Using the Touch Pad

 Key Combinations

 Battery Power

 Computing on the Road

 Standby or Hibernation Functions

 Security Measures

 CD/DVD Drive

 WinDVD

 Writing to CD/DVD

 PC Cards

 SD/SDHC Memory Card

 Mini Port Replicator

 External Display

 USB Devices

 Modem

 LAN

 Disabling/Enabling Wireless Com-

munication

 Wireless LAN

 Bluetooth

 Setup Utility

 Icon Enlarger

 Loupe Utility

 Troubleshooting (Advanced)

 Check the Computer’s Usage Sta-

tus

 PC Information Popup

 Protecting Your Computer from

Viruses

 Technical Information

Getting StartedUseful InformationTroubleshootingAppendix

Handling and Maintenance

 Place the computer on a flat stable surface. Do not place the computer upright. If the computer is exposed to an

extremely strong impact, it may become inoperable.

 Temperature: Operation: 5 °C to 35 °C {41 °F to 95 °F}

Storage: -20 °C to 60 °C {- 4 °F to 140 °F}

Humidity: Operation: 30% to 80% RH (No condensation)

Storage: 30% to 90% RH (No condensation)

Even within the above temperature/humidity ranges, using for a long time in an extreme environment will result in

the product deterioration and will shorten the product life.

• Be sure to use the computer in an environment with sufficient heat ventilation.

- Avoid using the computer on a highly heat retentive surfaces (e.g., rubber pads and blankets). If possible, use

the computer on surfaces that can dissipate heat, such as a steel desk.

- Do not cover the computer with towels, keyboard covers, etc., as this prevents heat dissipation.

- When using the computer, always keep the display open. (Note, however, that closing the display while the com-

puter is in use does not cause generation of heat, ignition, or other malfunctions.)

 Do not place the computer in the following areas, otherwise the computer may be damaged.

• Near electronic equipment. Image distortion or noise may occur.

• Near magnets or in magnetic fields.

• In extremely high or low temperature.

 As the computer can become hot during operation, keep it away from items that are sensitive to heat.

This computer is designed to minimize shock to parts such as the hard disk drive, but no warranty is provided against

any trouble caused by shock. Be extremely careful when handling the computer.

 When carrying the computer:

• Turn off the computer.

• Remove all external devices, cables, cards and other protruding things.

• Remove a disc in the CD/DVD drive.

• Do not drop or hit the computer against solid objects.

• Do not leave the display open.

• Do not pick up or hold the computer by the display part.

 When you board an airplane, take the computer with you and never put it in your

checked luggage. When using the computer on airplane, follow the airline’s

instructions.

 When carrying a spare battery, put it in a plastic bag to protect its terminals.

 This computer contains a magnet and magnetic products at the locations circled in

the illustration at right. Avoid leaving metallic object or magnetic media in contact

with these areas.

 The touch pad is designed to be used with a finger tip. Do not place any object on

its surface and do not press down strongly with sharp-pointed or hard objects that

may leave marks (e.g., nails, pencils and ball point pens).

 Avoid any harmful substances such as oil from getting into the touch pad. The cur-

sor may not work correctly.

 If the computer is being carried in a soft bag with the battery pack removed, avoid undue pressure on the body of the

computer in a crowded place, etc., as this may result in damage to the LCD.

 If the computer becomes warm during usage

 Check the following

• If you are not using a wireless LAN, turn the wireless LAN off.

• If the computer becomes warm while the screen saver is displayed, set the screen saver to [Windows XP]. Screen

savers that use 3-D images or other complex images increase the CPU utilization rate.

• Use recommended RAM module products. Non-recommended RAM modules may not operate properly, and may

cause damage to your computer.

 Double-click on the desktop and click [High speed], then click [OK].

• When you set [High speed], rotation of the cooling fan speeds up and the computer can be cooled down. Note that

the battery operating time will be shorter.

• When you do not frequently use CPU or the rotation noise of the fan bothers you, set [Standard] or [Low speed] as

necessary.

Operation Environment

Handling Cautions

Bottom

Getting StartedUseful InformationTroubleshootingAppendix

Handling and Maintenance

 When using peripheral devices

Follow these instructions and the Reference Manual to avoid any damage to the devices. Carefully read the instruction

manuals of the peripheral devices.

 Use the peripheral devices conforming to the computer’s specifications.

 Connect to the connectors in the correct direction.

 If it is hard to insert, do not try forcibly but check the connector’s shape, direction, alignment of pins, etc.

 If screws are included, fasten them securely.

 Preventing your computer from unauthorized use via wireless LAN/wireless WAN/Bluetooth

 Before using wireless LAN/wireless WAN/Bluetooth, make the appropriate security settings such as data encryption.

 Computrace

Software

Computrace

software tracks your stolen computer.

 Computrace

software is not included or installed in this computer.

 Consult Absolute Software Corp. before disposal.

 Refer to the following URL for Computrace

software for installation and available service regions. Note that this

service is only available in certain regions.

http://www.absolute.com

To clean the LCD panel and touch pad

Wipe lightly with a gauze or other dry, soft cloth.

To clean areas other than the LCD panel and touch pad

Wet a soft cloth with water or a diluted kitchen cleanser (neutral), wring the cloth out thoroughly, and wipe the dirty area gently.

Using a detergent other than a neutral kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect painted surfaces.

CAUTION



Do not use benzene, thinner, or rubbing alcohol since it may adversely affect the surface causing discoloration, etc. Do not

use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface.

 Do not apply water or detergent directly to the computer, since liquid may enter inside of the computer and cause

malfunction or damage.

Maintenance

Getting StartedUseful InformationTroubleshootingAppendix

The keyboard on this computer incorporate a drain system (a moisture protection mechanism) that minimizes the

amount of liquid reaching the inside of the computer even if water is spilled on the keyboard.

Any water that comes in contact with the keyboard is drained off through holes in the bottom of the computer, so that vir-

tually no water is left inside the computer. However, this is not a guarantee against damage to the hard disk or other

internal parts, or against the loss or deletion of data.

The drain system is incorporated into only the keyboard. It does not apply to any other components.

 If you spill water or any other liquid on the keyboard, even a small amount, be sure to perform the following steps.

Failure to perform these steps may result in damage to the computer. The drain system will not provide complete

protection against water entering the computer.

1 Immediately turn off the computer, and remove the AC adaptor.

2 Wipe any water droplets off of the top of the keyboard using a

soft, dry cloth.

3 Slowly lift up the computer, keeping it level,

and wipe any water coming out of the holes

on the bottom using a soft, dry cloth.

If the computer is tilted during this step, liquid may seep

inside the computer resulting in damage.

4 Keeping the computer level, move

the computer to a dry place.

If the computer is placed back on the wet

surface, water may seep inside the computer

from the bottom.

5 Insert the tip of a ball-point pen or other object into the emer-

gency hole on the bottom of the computer, and move it in the

direction of the arrow to open the disc cover.

The computer should be kept level, without tilting, while the disc cover is being

opened. Move the computer to the edge of the desk or table to perform this oper-

ation.

6 Check to see whether there is any water inside the CD/DVD drive.

If there is water inside, wipe it using a soft, dry cloth.

7 Remove the battery pack.

8 Be sure to contact your technical support office to have the computer checked for any

malfunctions.

If You Spill Water on the Keyboard

Note that repairs resulting from liquids being spilled on the computer are not free of charge, and not covered by war-

ranty.

Getting StartedUseful InformationTroubleshootingAppendix

Expanding Memory

Use RAM modules that comply with the specifications below. Using any other module may cause malfunction or result

in computer failure.

RAM module specifications:

DDR2 SDRAM, 200 pins, SO-DIMM, 1.8 V, PC2-5300

CAUTION

 Use recommended RAM module products. Do not use non-recommended RAM modules. Non-recommended RAM

modules may not operate properly, and may cause damage to your computer. Some non-recommended RAM mod-

ules may overheat, causing the cover to warp. Refer to various sources for recommended RAM module.

 RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the

human body has adversely affected such RAM modules. When inserting or removing a RAM module, do not touch

the terminals or internal components, insert objects other than the module, or allow foreign particles to enter. Doing

so has been known to cause damage, fire or electric shock.

 Panasonic Corporation will bear no responsibility whatsoever for failures or damage caused by the use of non-rec-

ommended RAM modules, or by incorrect installation or removal of such RAM modules. Before installing a RAM

module, confirm the product type and the correct installation method.

Preparation

A Turn off your computer.

• Do not use the standby or hibernation.

B Disconnect the AC adaptor and remove the battery pack.

C Remove the screw (A) and the cover on the bottom of the computer.

• Use the appropriate screw driver so as not to strip the thread of screw.

1 Place the RAM module lightly in parallel with the RAM module slot so that the notch (B)

of the RAM module and the protrusion (C) of the RAM module slot is in the same direc-

tion.

 The gold terminals are visible at this point.

 RAM module is at an angle of 20

° - 30° with the horizontal line.

Inserting the RAM Module

RAM Module

Slot

B C Gold Terminals

La page est en cours de chargement...

Panasonic Toughbook CF-W8EWEZZAM Operating Instructions Manual

Marque: Panasonic

Modèle: Toughbook CF-W8EWEZZAM

Catégorie: Des cahiers

Taper: Operating Instructions Manual

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Panasonic Toughbook CF-W8EWEZZAM

Panasonic Toughbook CF-W8EWEZZAM Operating Instructions Manual

Ce manuel convient également à

Panasonic Toughbook CF-W8EWEZZAM Operating Instructions Manual

dans d''autres langues

Documents connexes

Autres documents