Whirlpool GJC3055RP06 Le manuel du propriétaire

Marque: Whirlpool

Modèle: GJC3055RP06

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

W10162165A

ELECTRICCOOKTOP

For questions about features, operation/performance,

parts, accessories or sewice, call: 1-800-253-1301

or visit our website at www,whidpool,corn

in Canada call 1-800-807-6777 or visit our website at

www.whidpooLcB

TABLEDECUISSON

ELECTRIQUE

Au Canada, pour assistance, installation ou service, compccez le

1-800-807-6777 ou visit ez notre site web & www.whidpool.ca

Table of Contents/Table des matieres .................. 2

Models/ModUles

GJC3055, GJC3655, GJC3054,

GJC3654, GJC3034, GJC3634,

RCC3024

TABLEOFCONTENTS

COOKTOP SAFETY ........................................................................ 2

PARTS AND FEATURES -

TOUCH-ACTIVATED CONTROLS ................................................ 4

COOKTOP CONTROLS -

TOUCH-ACTIVATED CONTROLS ................................................ 5

Dual Element ................................................................................ 6

Control LocWAII Off ...................................................................... 6

WARM HI/LO Function ............................................................... 6

PARTS AND FEATURES - KNOB CONTROLS ............................ 7

COOKTOP CONTROLS - KNOB CONTROLS ............................. 8

Dual Element ................................................................................ 8

Bridge Element ............................................................................. 9

Warm Zone Element .................................................................... 9

ACCUSIMMER ®Feature .............................................................. 9

COOKTOP USE ............................................................................ 10

Ceramic Glass ............................................................................ 10

Home Canning ........................................................................... 10

Cookware ................................................................................... 10

COOKTOP CARE .......................................................................... 11

General Cleaning ........................................................................ 11

TROUBLESHOOTING .................................................................. 12

ASSISTANCE OR SERVICE ......................................................... 13

In the U.S.A ................................................................................ 13

In Canada ................................................................................... 13

WAR RANTY .................................................................................. 14

TABLEDESMATIERES

SI_CURITI_ DE LA TABLE DE CUISSON .................................... 15

PILbCESET CARACTERISTIQUES -

COMMANDES TACTILES ............................................................ 17

COMMANDES DE LA TABLE DE CUlSSON -

COMMANDES TACTILES ............................................................ 18

€16ment double .......................................................................... 19

Control Lock/All Off (verrouillage des commandes/toutes

commandes eteintes) ................................................................. 20

Fonction WARM HI/LO (maintien au chaud - 61ev6/bas)...........20

PIECES ET CARACTERISTIQUES -

COMMANDES A BOUTON .......................................................... 21

COMMANDES DE LA TABLE DE CUlSSON -

COMMANDES A BOUTON .......................................................... 22

€16ment double .......................................................................... 22

EI6ment de pont ......................................................................... 23

EI6ment Warm Zone (zone de maintien au chaud) .................... 23

Caract6ristique ACCUSIMMER® ................................................ 24

UTILISATION DE LA TABLE DE CUlSSON ................................ 24

Vitroceramique ........................................................................... 24

Pr6paration de conserves h la maison ....................................... 24

Ustensiles de cuisson ................................................................ 25

ENTRETIEN DE LA TABLE DE CUlSSON .................................. 25

Nettoyage g6n@al ...................................................................... 25

DIePANNAGE ................................................................................. 26

ASSISTANCE OU SERVICE ......................................................... 27

GARANTIE ..................................................................................... 28

COOKTOPSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately/

follow instructions.

You can be killed or seriously injured if you don't follow

instructions,

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the cooktop, follow

basic precautions, including the following:

• CAUTION: Do not store items of interest to children in

cabinets above a cooktop - Children climbing on the

cooktop to reach items could be seriously injured.

• Proper Installation - Be sure your cooktop is properly

installed and grounded by a qualified technician.

• Never Use Your Cooktop for Warming or Heating the

Room.

• Do Not Leave Children Alone - Children should not be left

alone or unattended in area where cooktop is in use. They

should never be allowed to sit or stand on any part of the

cooktop.

• Wear Proper Apparel - Loose-fitting or hanging garments

should never be worn while using the cooktop.

• User Servicing - Do not repair or replace any part of the

cooktop unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

• Storage on Cooktop - Flammable materials should not be

stored near surface units.

• Do Not Use Water on Grease Fires - Smother fire or flame

or use dry chemical or foam-type extinguisher.

• Use Only Dry Potholders - Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

• DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS - Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not touch,

or let clothing or other flammable materials contact surface

units or areas near units until they have had sufficient time

to cool, Among those areas are the cooktop and surfaces

facing the cooktop.

• Use Proper Pan Size - This cooktop is equipped with one

or more surface units of different size. Select utensils

having flat bottoms large enough to cover the surface unit

heating element. The use of undersized utensils will

expose a portion of the heating element to direct contact

and may result in ignition of clothing. Proper relationship of

utensil to burner will also improve efficiency.

• Never Leave Surface Units Unattended at High Heat

Settings - Boilover causes smoking and greasy spillovers

that may ignite.

• Glazed Cooking Utensils - Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for cooktop service without breaking

due to the sudden change in temperature.

• Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units - To reduce the risk of burns,

ignition of flammable materials, and spillage due to

unintentional contact with the utensil, the handle of a

utensil should be positioned so that it is turned inward, and

does not extend over adjacent surface units.

• Do Not Cook on Broken Cooktop - if cooktop should

break, cleaning solutions and spillovers may penetrate the

broken cooktop and create a risk of electric shock. Contact

a qualified technician immediately.

• Clean Cooktop With Caution - if a wet sponge or cloth is

used to wipe spills on a hot cooking area be careful to

avoid steam burn. Some cleaners can produce noxious

fumes if applied to a hot surface.

For units with ventilating hood -

• Clean Ventilating Hoods Frequently- Grease should not

be allowed to accumulate on hood or filter.

• When flaming foods under the hood, turn the fan on.

For units with coil elements -

• Make Sure Reflector Pans or Drip Bowls Are in

Place - Absence of these pans or bowls during

cooking may subject wiring or components

underneath to damage.

• Protective Liners - Do not use aluminum foil to line surface

unit drip bowls, except as suggested in the manual.

Improper installation of these liners may result in a risk of

electric shock, or fire.

• Do Not Soak Removable Heating Elements - Heating

elements should never be immersed in water.

SAVE THESE INSTRUCTIONS

PARTSANDFEATURES. UCH-ACTIVA D CONTROLS

This manual covers different models. The cooktop you have purchased may have some or all of the items listed. The locations and

appearances of the features shown here may not match those of your model.

Control Panels

Model GJC3055 (30" [77.1 cm])

Touch-Activated Electronic Controls

_ _i__, _(,_

\'_ G O _'_j

................C

Model GJC3655 (36" [91.4 cm])

Touch-Activated Electronic Controls

A B C

o.L], J_.',.& Z: _i_ii!_'& L]/;.. =&o.,

G E D

H G

A. Left rear touch control (simmer

function; warming function)

B, Right rear touch control

(simmer function; warming

function; dual-size element)

C. Increase/decrease temperature

touch control

D, Hot surface indicator light

E.Right front touch control

(simmer function; warming

function)

E Control lock/All off

G. Left front touch control

(simmer function; warming

function; dual-size element)

A. Left rear touch control (simmer

function; warming function)

B, Center rear touch control (simmer

function; warming function; dual-

size element)

C, Right rear touch control (simmer

function; warming function)

D, Increase/decrease temperature

touch control

Cooktops

36" (91.4 crn) Touch-Activated Electronic Control Model shown

B C D

F E

E. Hot surface indicator lights

F. Right front touch control

(simmer function; warming

function)

G, Control lock/All oft

H. Left front touch control

(simmer function; warming

function; dual-size element)

H ....

A, Ceramic glass cooktop

B. Left rear surface cooking area

C. Center rear surface cooking area

(with dual-size element)

G F

D, Right rear surface cooking area

E.Control panel

F. Right front surface cooking area

G, Left front surface cooking area

(with dual-size element)

H. Model and serial number plate (located

underneath cooktop on metal cabinet)

COOKTOPCONTROLS- UCH-ACTWATED CONTROLS

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or tire.

The electronic touch controls offer a variety of heat settings for

optimal cooking results. When you are melting foods such as

chocolate or butter, or when proofing bread, the surface cooking

area can be set to WARM HI for minimal element operation.

For maximum element operation, all cooktop touch controls can

be set to HI when bringing liquids to a fast and rapid boil. Touch

the "minus" (-) keypad to immediately reach the HI setting.

Use the following chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

HI • Start food cooking.

• Bring liquid to a boil.

Medium High • Hold a rapid boil.

Between 9 - 6

• Quickly brown or sear food.

MED • Maintain a slow boil.

Medium • Fry or saute foods.

Medium Low • Cook soups, sauces and

Between 4 - 2 gravies.

• Stew or steam food.

SIMMER HI • Simmering larger quanitites of

food in large pots.

• Simmering without a lid.

SIMMER LO • Simmeringsmallerquantitiesof

food in medium to small pots.

• Simmer without a lid.

WARM HI • Keep larger amounts of food

warm.

• Melt chocolate or butter.

WARM LO • Keep smaller amounts of food

warm.

To Use:

1. Touch ON/OFE

2. Touch the "+" or "-" keypads to increase or decrease power.

3. To choose a power level between HI and WARM LO, touch

and hold either the "+" or "-" keypad until the desired level

has been reached.

4. When finished cooking, touch ON/OFF to turn surface

cooking area(s) off individually, or touch ALL OFF to turn all

elements off at the same time.

Dual Elements • Large-diameter cookware.

• Large quantities of food.

• Home canning.

I REMEMBER: When cooktop is in use, the entire cooktop I

area may become hot.

Hot Surface Indicator Lights

The Hot Surface Indicator Lights are located next to each of the

cooktop touch controls. The Hot Surface Indicator Lights will

glow as long as any surface cooking area is too hot to touch,

even after the surface cooking area(s) is turned off.

\,1:: o J

A. Hot surface indicator light

If the cooktop is on when a power failure occurs, the Hot Surface

Indicator Lights will remain on up to 45 minutes after the power is

restored to the cooktop.

Thedual-sizeelementsofferflexibilitytocookusingdifferent

sizesofcookware.Thesingleelementcanbeusedinthesame

wayasaregularelement.Thedualelementcombinestheinner

andouterelementsandisrecommendedforlargercookware,

largequantitiesoffood,andhomecanning.

i i

_f J

,\ //

A. Single size

B. Dual size

To Use:

1. Touch ON/OFE

2. Touch HEAT ZONE SIZE to select desired zone diameter.

3. Choose a power level between HI and WARM LO. Touch the

"+" or "-" keypad to increase or decrease power.

4. When finished cooking, touch ON/OFF to turn surface

cooking area(s) off individually, or touch ALL OFF to turn all

elements off at the same time.

The ALL OFF cooktop touch controls turn off all surface cooking

areas.

The Control Lock cooktop touch control averts unintended use of

the surface cooking areas. When the cooktop is locked out, the

surface cooking areas cannot be turned on by the cooktop touch

controls.

To Lock Cooktop: Press and hold the CONTROL LOCK/

ALL OFF keypad for 5 seconds. After 5 seconds, CONTROL

LOCK will glow red, indicating that the cooktop touch controls

are in the lockout position.

To Unlock Cooktop: Press and hold the CONTROL LOCK/

ALL OFF keypad for 5 seconds.

The WARM HI and WARM LO functions can be used to keep

cooked foods warm, and may be used whether or not the other

surface cooking zones are in use. One hour is the recommended

maximum time to maintain food quality.

The WARM HI and WARM LO functions are available on all the

surface cooking elements.

WARM HI provides higher temperature warming. The WARM HI

function is also ideal for melting chocolate or butter.

It is not recommended for heating cold foods. When the WARM

HI or WARM LO functions are in use, it will not glow red like the

cooking zones, but the indicator light will glow on the control

panel.

Use only cookware and dishes recommended for oven and

cooktop use, and that have fiat bottoms to make direct contact

with the cooktop surface. Use pot holders or oven mitts to

remove cookware.

Cover all foods with a lid or aluminum foil. Do not use plastic

wrap to cover food, as it may melt onto the cooktop surface.

When warming baked goods, allow a small opening inthe cover

for moisture to escape.

Food quality may deteriorate if food is kept on the WARM LO

function for an extended period of time. For best results, keep

food warm for no longer than 30 to 45 minutes.

To Use WARM LO:

1. Touch ON/OFE

2. Touch the "plus" (+) keypad once for WARM LO.

3. When finished cooking, touch ON/OFF to turn off surface

cooking area.

To Use WARM HI:

1. Touch ON/OFE

2. Touch the "plus" (+) keypad twice for WARM HI.

3. When finished cooking, touch ON/OFF to turn off surface

cooking area.

PARTSANDFEATURES.KNOBCONTROLS

This manual covers different models. The cooktop you have purchased may have some or all of the items listed. The locations and

appearances of the features shown here may not match those of your model.

Control Panels

Model GJC3654 (36" [91.4 cm]) shown

Model GJC3054 (30" [77.1 cm]) not shown

A B C

_1_* ,_ _I_o ,_ _,_,

Model GJC3634 (36" [91.4 cm]) shown

Model GJC3034 (30" [77.1 cm]) not shown

" _-_'-'J E

F E

G F

A. Left rear control knob

B. Center rear control knob

(dual-size element)

C. Right rear control knob

(_/arm zone control on some

models)

D. Power on light

E.Right front control knob

F ACCUStMMER _ control knob

G. Left front control knob

(dual-size element)

H. Hot surface indicator light

A. Hot surface indicator lights

B. Left rear control knob

C. ACCUStMMER _ control knob

D. Right rear control knob

(Warm zone control on some

models)

E. Center rear control knob

(dual-size element)

£ Poweron light

G. Right front control knob

H. Left front control knob

(dual-size bridge burner)

Cooktops: Model GJC 3634 (36" [91.4 cm]) shown

B C D

/ _1 ••_ • _•

iiiiill_ii_ii_i_i_i_i_i

q /

i /"_i /

• •• @

A. Ceramic glass cooktep

B. Left rear single surface cooking area

C. Center rear surface cooking area (with

dual-size element)

D. Right rear surface cooking area

(warm zone on some models)

E. Control panel

F. Right front surface cooking area

G. Left front single surface cooking area

(dual-size bridge burner)

H. Model and serial number plate (located

underneath cooktop on metal cabinet)

COOKTOPCONSOLS -KNOBCONTROLS

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

Hot Surface Indicator Lights (on Knob Control models)

The Hot Surface Indicator Lights will glow as long as any surface

cooking area is too hot to touch, even after the surface cooking

area(s) is turned off.

A ......................._

The controls can be set to anywhere between HI and LO.

A. Hot surface indicator light

If the cooktop is on when a power failure occurs, the Hot Surface

Indicator Lights will remain on after the power is restored to the

cooktop. They will remain on until the cookto ) has cooled

completely.

To Use:

1. Push in and turn knob to desired heat setting.

Use the following chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

HI • Start food cooking.

Medium High

Between MEDIUM - HI

MEDIUM

Medium Low • Stew or steam food.

Between MEDIUM - LO

• Simmer.

LO • Melt chocolate or butter.

• Low simmer using lids.

ACCUSIMMER ®setting • Precise simmer control.

(on some models)

Bring liquid to a boil.

Hold a rapid boil.

Quickly brown or sear food.

Maintain a slow boil.

Fry or saut6 foods.

Cook soups, sauces and

gravies.

High simmer or simmer

without lids.

Power Light

Each cooktop has a Power On light. The light will glow when any

burner is on.

The dual-size elements offer flexibility to cook using different

sizes of cookware. The single element can be used in the same

way as a regular element. The dual element combines the inner

and outer elements and is recommended for larger cookware,

large quantities of food, and home canning.

..............y)/

A. Single size

B. Dual size

A.S_g_zone

B. Dualzone

Dual Elements

(on some models)

• Large- or small-diameter

cookware.

• Large or small quantities of

food.

Warm Zone Element • Keep cooked foods warm.

(on some models) • Home canning.

To Use SINGLE:

1. Push in and turn knob from the OFF position to the SINGLE

zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

To Use DUAL:

1. Push in and turn knob from the OFF position to the DUAL

zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

I REMEMBER: When cooktop is in use, the entire cooktop m

area may become hot.

The bridge element allows flexibility in the left side cooking area.

Use the bridge area to create an oblong heated area to cook with

large cookware.

C ......

" C2--_

i.._ _-i

A. Single size

B. Bridge area

C. Single size

Use the bridge element to create an oblong heated area to cook

with oblong pans.

To use SINGLE (A):

1. Push in and turn front left knob from OFF position to the

SINGLE zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

To use SINGLE and BRIDGE area (A + B):

1. Push in and turn front left knob from OFF position to the

BRIDGE zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

To use SINGLE (C):

1. Push in and turn rear left knob from OFF position anywhere

between LO and HI.

2. Turn knob to OFF when finished.

To use both Single elements and Bridge (A + B + C):

1. Turn on Single and Bridge (A + B).

2. Turn on Single (C).

3. Turn knobs to OFF when finished.

The Warm Zone feature can be used to keep cooked foods

warm. One hour is the recommended maximum time to maintain

food quality.

Do not use it to heat cold foods.

When the Keep Warm function is in use, it will not glow red like

the cooking zones, but the indicator light will glow on the control

panel.

The Warm Zone feature can be used alone or when any of the

other surface cooking areas are being used, and can be set from

LO to HI for different levels of heating.

The Warm Zone Element area will not glow red when cycling on.

However, the hot surface indicator light will glow as long as the

Warm Zone Element area is too hot to touch.

• Use only cookware and dishes recommended for oven

and cooktop use.

• Cover all foods with a lid or aluminum foil. When warming

baked goods, allow a small opening in the cover for

moisture to escape.

• Do not use plastic wrap to cover food. Plastic wrap may

melt.

• Use pot holders or oven mitts to remove food.

OFi:

To Use:

1. Push in and turn Warm Zone knob to desired setting.

2. Turn knob to OFF when finished.

The ACCUSIMMER _feature setting is an adjustable heat setting

for more precise simmering.

The ACCUSIMMER '_control knob has two settings: SIMMER and

NORMAL BURNER. When the control is set on NORMAL

BURNER, the element will function as a single or dual element.

To Use:

1. Turn the ACCUSIMMER _control knob to the SIMMER

position.

2. Push in and turn control knob to a setting between LO and HI

setting.

Select LO for a low simmer or when using lids and medium

for a high simmer or when not using lids. Select either the

Single or Dual Zone settings. Increase heat as necessary to

achieve desired simmer. (See "Dual Element" section.)

3. Turn the ACCUSIMMER _control knob back to the Normal

Burner setting when finished cooking.

COOKTOPUSE

The surface cooking area will glow red when an element is on. It •

may cycle on and off to maintain the selected heat level.

It is normal for the surface of white or biscuit ceramic glass to

appear to change color when surface cooking areas are hot. As

the glass cools, it will return to its original color.

Wiping off the cooktop before and after each use will help keep it

free from stains and provide the most even heating. On cooktops

with white or biscuit ceramic glass, soils and stains may be more •

visible, and may require more cleaning and care. For more

information, see "General Cleaning" section.

• Do not store jars or cans above the cooktop. Dropping a

heavy or hard object onto the cooktop could crack the

cooktop.

Do not leave a hot lid on the cooktop. As the cooktop cools,

air can become trapped between the lid and the cooktop,

and the ceramic glass could break when the lid is removed.

For foods containing sugar in any form, clean up all spills and

soils as soon as possible. Allow the cooktop to cool down

slightly. Then, while wearing oven mitts, remove the spills

while the surface is still warm. If sugary spills are allowed to

cool down, they can adhere to the cooktop and can cause

pitting and permanent marks.

Do not slide cookware or bakeware across the cooktop.

Aluminum or copper bottoms and rough finishes on •

cookware or bakeware could leave scratches or marks on the

cooktop. •

Do not cook popcorn in prepackaged aluminum containers

on the cooktop. They could leave aluminum marks that

cannot be removed completely.

Do not allow objects that could melt, such as plastic or

aluminum foil, to touch any part of the entire cooktop.

Do not use the cooktop as a cutting board.

Use cookware about the same size as the surface cooking

area. Cookware should not extend more than 1/2"(1.3 cm)

outside the area.

z_& ..............B

I \

A. Surface cooking area

B. Cookware/canner

C. ½" (1.3 cm) Maximum overhang

Use flat-bottomed cookware for best heat conduction and

energy efficiency. Cookware with rounded, warped, ribbed or

dented bottoms could cause uneven heating and poor

cooking results.

Determine flatness by placing the straight edge of a ruler

across the bottom of the cookware. While you rotate the ruler,

no space or light should be visible between it and the

cookware.

Cookware designed with slightly indented bottoms or small

expansion channels can be used.

Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits

when heated.

• Do not cook foods directly on the cooktop.

When canning for long periods, alternate the use of surface

cooking areas, elements or surface burners between batches.

This allows time for the most recently used areas to cool.

• Center the canner on the grate or largest surface cooking

area or element. On electric cooktops, canners should not

extend more than 1/2"(1.3 cm) beyond the surface cooking

area or element.

• Do not place canner on 2 surface cooking areas, elements or

surface burners at the same time.

On ceramic glass models, use only flat-bottomed canners.

On coil element models, the installation of a Canning Unit Kit

is recommended. If a kit is not installed, the life of the coil

element will be shortened. See "Assistance or Service" for

ordering instructions.

For more information, contact your local agricultural

department. Companies that manufacture home canning

products can also offer assistance.

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides, and a

well-fitting lid and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop. Aluminum and copper

may be used as a core or base in cookware. However, when used

as a base they can leave permanent marks on the cooktop or

grates.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has

the same characteristics as its base material. For example,

aluminum cookware with a nonstick finish will take on the

properties of aluminum.

Use the following chart as a guide for cookware material

characteristics.

COOKWARE CHARACTERISTICS

Aluminum • Heats quickly and evenly.

• Suitable for all types of cooking.

• Medium or heavythickness is best for

most cooking tasks.

Cast iron • Heats slowly and evenly.

• Good for browning and frying.

• Maintains heat for slow cooking.

Ceramic or • Follow manufacturer's instructions.

Ceramic glass • Heats slowly, but unevenly.

• Ideal results on low to medium heat

settings.

Copper • Heats very quickly and evenly.

Earthenware • Follow manufacturer's instructions.

• Use on low heat settings.

Porcelain • See stainless steel or cast iron.

enamel-on-

steel or cast

iron

Stainless steel • Heats quickly, but unevenly.

• A core or base of aluminum or copper

on stainless steel provides even

heating.

COOKTOPCARE

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Always follow label instructions

on cleaning products.

Soap, water and a soft cloth or sponge are suggested first unless

otherwise noted.

STAINLESS STEEL (on some models)

Cleaning Method:

Rub in direction of grain to avoid damaging.

• Stainless Steel Cleaner & Polish Part Number 31462 (not

included):

See "Assistance or Service" section to order.

• Liquid detergent or all-purpose cleaner: Rinse with clean

water and dry with soft, lint-free cloth.

• Vinegar for hard water spots.

Do not use soap-filled scouring pads, abrasive cleaners, Cooktop

Polishing Creme, steel-wool pads, gritty washcloths or some

paper towels. Damage may occur.

COOKTOPCONTROLS

Cleaning Method:

When replacing knobs, make sure knobs are in the Off position.

On some models, do not remove seals under knobs.

• Soap and water or dishwasher:

Pull knobs straight away from control panel to remove.

Do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs.

CERAMIC GLASS

Cleaning Method:

Always wipe with a clean, wet cloth or sponge and dry thoroughly

to avert streaking and staining.

Cooktop Cleaner Part Number 31464 is recommended for regular

use to help avert scratches, pitting and abrasions, and to

condition the cooktop. It may be ordered as an accessory. See

"Assistance or Service" section to order.

Cooktop Scraper Part Number 3183488 is also recommended for

stubborn soils, and can be ordered as an accessory. See

"Assistance or Service" section to order. The Cooktop Scraper

uses razor blades. Store razor blades out of the reach of

children.

Light to moderate soil

• Paper towels or clean damp sponge:

Clean while the cooktop is still warm. You may want to wear

oven mitts while doing so.

Sugary spills (jellies, candy, syrup)

• Cooktop Scraper:

Clean while the cooktop is still warm. You may want to wear

oven mitts while doing so.

• Cooktop Polishing Creme and clean damp paper towel:

Clean as soon as cooktop has cooled down. Rub creme into

surface with a damp paper towel or soft cloth. Continue

rubbing until white film disappears.

Heavy soil, dark streaks, specks and discoloration

• Cooktop Polishing Creme or nonabrasive cleanser:

Rub product into soil with a damp paper towel or soft cloth.

Continue rubbing until white film disappears.

Burned-on soil

• Cooktop Polishing Creme and Cooktop Scraper:

Rub creme into soil with damp paper towel. Hold scraper as

flat as possible on surface and scrape. Repeat for stubborn

spots. Polish entire cooktop with creme and paper towel.

Metal marks from aluminum and copper

• Cooktop Polishing Creme:

Clean as soon as cooktop has cooled down. Rub creme into

surface with a damp paper towel or soft cloth. Continue

rubbing until white film disappears. The marks will not totally

disappear but after many cleanings become less noticeable.

Tiny scratches and abrasions

• Cooktop Polishing Creme:

Rub creme into surface with a damp paper towel or soft

cloth. Continue rubbing until white film disappears. Scratches

and abrasions do not affect cooking performance and after

many oleanings become less noticeable.

Do not use steel wool, abrasive powder cleansers, chlorine

bleach, rust remover or ammonia because damage may occur.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

Has a household fuse blown, or has a circuit breaker

tripped?

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

• Is the appliance wired properly?

See Installation instructions.

Cooktop will not operate A

• Is the control knob set correctly? __

Push in knob before turning to a setting.

• On ceramic glass Touch Activated models, is the "Control

Lock" set?

See "Control Lock/All Off" section _

• On coil element models, is the element inserted properly?

See "Coil Elements and Burner Bowls" section.

Excessive heat around cookware on cooktop

• Is the eookware the proper size?

Use cookware about the same size as the surface cooking

area, element or surface burner. Cookware should not extend

more than VZ' (1.3 era) outside the cooking area.

Cooktop has flashing lights

• Are there lights on the eooktop flashing on and off?

The following pattern of blinking lights on the cooktop control

panel indicates that one or more keys are permanently

pressed. Follow the steps below.

A B

©©@

©©

1. Make sure the cooktop controls are OFR

2. Clean the cooktop touch control panel thoroughly. See

"General Cleaning" section.

3. If the cooktop lights continue to flash, disconnect power

or unplug the cooktop.

4. After 1 minute, reconnect power or plug in the cooktop.

5. If the lights continue to blink on and off, call for service.

The following pattern of alternately blinking lights on the

cooktop control panel indicates a temporary standby

condition to avoid over temperatures in the cooktop.

©@©

@©

A. 30" (76.2 cm) models B. 36" (91.4 cm) models

• Let the cooktop cool down, and the blinking lights will stop.

Cooktop cooking results not what expected

• Is the proper cookware being used?

See "Cookware" section.

• Is the control knob set to the proper heat level?

See "Cooktop Controls" section.

• Is the appliancelevel?

Level the appliance. See the Installation Instructions.

• On coil element models, is the element inserted properly?

See "Coil Elements and Burner Bowls" section.

A. 30" (76.2 cm) models B. 36" (91.4 cm) models

ASSISTANCEORSERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only FSP® replacement parts. FSP®replacement parts will fit

right and work right because they are made with the same

precision used to build every new WHIRLPOOL '_ appliance.

To locate FSP®replacement parts in your area, call us or your

nearest Whirlpool designated service center.

Call the Whirlpool Customer eXperience Center

toll free: 1-800-253-1301.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Installation information.

• Use and maintenance procedures.

• Accessory and repair parts sales.

• Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

Referrals to local dealers, repair parts distributors, and

service companies. Whirlpool designated service technicians

are trained to fulfill the product warranty and provide after-

warranty service, anywhere in the United States.

To locate the Whirlpool designated service company in your

area, you can also look in your telephone directory Yellow

Pages.

For further assistance

If you need further assistance, you can write to Whirlpool

Corporation with any questions or concerns at:

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, M149022-2692

Please include a daytime phone number in your correspondence.

Accessories U.S_..

To order accessories, call the Whirlpool Customer eXperience

Center toll free at 1-800-442-9991 and follow the menu prompts.

Or visit our website at www.whirlpool.com and click on "Buy

Accessories Online."

Canning Unit Kit

(coil element models)

Order Part Number 242905

Cooktop Cleaner

(ceramic glass models)

Order Part Number 31464

Cooktop Protectant

(ceramic glass models)

Order Part Number 31463

Cooktop Care Kit

(includes cleaner, protectant, and applicator pads)

Order Part Number 31605

Cooktop Scraper

(ceramic glass models)

Order Part Number 3183488

All-Purpose Appliance Cleaner

Order Part Number 31662

Call the Whirlpool Canada LP Customer Interaction Centre toll

free: 1-800-807-6777.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Useand maintenance procedures.

• Accessory and repair parts sales.

• Referrals to local dealers, repair parts distributors, and

service companies. Whirlpool Canada LP designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in Canada.

For further assistance

ff you need further assistance, you can write to Whirlpool

Canada LP with any questions or concerns at:

Customer Interaction Centre

Whirlpool Canada LP

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

WHIRLPOOLCORPORATIONMAJORAPPLIANCEWARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter "Whirlpool") will pay for Factory Specified Parts

and repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company.

This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in

which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original purchase date

is required to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or

repair house fuses, or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is

contrary to published user or operator instructions and/or installation instructions.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of consumables or cleaning products not approved by Whirlpool.

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.

6. Any food loss due to refrigerator or freezer product failures.

7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be

repaired in the home and only in-home service is covered by this warranty.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Whirlpool servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance

with published installation instructions.

11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty

is void if the factory applied serial number has been altered or removed from your major appliance.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR

INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES

YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE

TO PROVINCE.

If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.

If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," you may find

additional help by checking the "Assistance or Service" section or by calling Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada,

call 1-800-807-6777. 9/07

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label located on the product.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

SECURI DELATABLEDECUISSON

Votre s_curit_ et celle des autres est trbs importante.

Nous donnons de nombreux messages de securite importants dans ce manuel et sur votre appareil menager. Assurez-vous de

toujours lire tousles messages de securite et de vous y conformer.

Voici le symbole d'alerte de securite.

Ce symbole d'alerte de s_curit_ vous signale les dangers potentiels de d_ces et de blessures graves _tvous

eta d'autres.

Tous les messages de securite suivront le symbole d'alerte de securit_ et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient :

Risque possible de d_cbs ou de blessure grave si vous ne

suivez pas imm_diatement les instructions.

Risque possible de d_cbs ou de blessure grave si vous

ne auivez pas les instructions,

Tous les messages de securite vous diront quel est le danger potentiel et vous disent comment r_duire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

IMPORTANTES INSTRUCTIONS DE SI=CURITle

AVERTISSEMENT : Pour reduire le risque d'incendie, de

choc electdque, de blessures ou de dommages lots de

I'utilisation de la table de cuisson, observer les precautions

elementaires suivantes, y compris ce qui suit :

• MISE EN GARDE : Ne pas remiaer dans les armoires

au-dessus d'une table de cuisson, des articles que des

enfants pourraient vouloir atteindre. Lea enfants pourraient

se brQler ou se blesser en gdmpant sur la table de cuisson.

• Installation appropdee - S'assurer que la table de cuisson

est correctement installee et reliee a la terre par un

technicien qualifie.

• Ne jamais utiliser la table de cuisson pour rechauffer ou

chauffer la piece.

• Ne pas laisser les enfants seuls -Les enfants ne doivent

pas ¢tre laisses seuls ou sans surveillance dans la piece

ou la table de cuisson esten service. Ne jamais laisser les

enfants s'asseoir ou se tenir sur une pattie quelconque de

la table de cuisson.

• Porter des v¢tements appropries - Des vetements amples

ou detaches ne doivent jamais ¢tre portes pendant

I'utilisation de la table de cuisson.

• Entretien par I'utilisateur- Ne pas reparer ou remplacer

toute piece de la table de cuisson si ce n'est pas

specifiquement recommande dans le manuel. Toute autre

operation d'entretien ou de reparation doit etre confiee _tun

technicien qualifie.

• Remisage sur la table de cuisson - Des materiaux

inflammables ne doivent pas etre remises pres des

elements a la surface.

• Ne pas utiliser d'eau sur un feu de graisse - €:touffer le feu

ou la flamme ou utiliser un extincteur a produits chimiques

seos ou tl mousse.

• N'utiliser que des mitaines de four s_ches - Des mitaines

de four mouillees ou humides sur des surfaces chaudes

peuvent provoquer des br01ures provenant de la vapeur.

Ne pas laisser les mitaines de four toucher les elements

chauffants. Ne pas utiliser une serviette ou autre tissu

epais.

• NE PAS TOUCHER LES ELC:MENTS b, LA SURFACE OU

L'ESPACE PRI_S DES I_LEMENTS -Les elements de

surface peuvent etre chauds m¢me Iorsqu'ils ont une teinte

foncee. Les endroits pres des elements t_la surface

peuvent devenir assez chauds pour provoquer des

brQlures. Pendant et apres I'utilisation, ne pas toucher les

elements chauffants et ne pas laisser les vetements ou

autres matedaux inflammables entrer en contact avec ces

elements de surface ou les endroits pres des elements,

avant qu'ils soient suffisamment refroidis. Ces endroits

comprennent la table de cuisson et les surfaces pres de la

table de la cuisson.

• Utiliser des ustensiles de format approprie - La table de

cuisson est munie d'un ou de plusieurs elements

chauffants de differentes grandeurs. Choisir les ustensiles

qui ont un fond plat assez grand pour couvrir I'element

chauffant de la surface de cuisson. L'utilisation d'ustensiles

trop petits exposera une partie de I'element chauffant, ce

qui peut provoquer I'inflammation des vetements.

L'utilisation d'un recipient de format correct ameliore

I'efficacite de la cuisson.

• Ne jamais laisser les elements de la table de cuisson sans

surveillance alors qu'ils chauffent a la puissance maximale

- II pourrait en resulter une ebullition qui cause de la

fumee et des renversements de corps gras qui peuvent

s'enflammer.

Ustensiles de cuisson vitrifies - Seulement certains types

d'ustensiles de verre, vitroceramique, ceramique, faience

ou autres surfaces vitdfiees conviennent pour le service

sur une table de cuisson, sans bris attdbuables aux

changements soudains de temperature.

Les poignees des ustensiles doivent etre tournees vers

I'intedeur et non vers le dessus des elements adjacents -

Pour reduire les dsques de brQlures, d'inflammation de

produits combustibles et de renversements dus

I'entrechoquement non intentionnel des ustensiles, la

poignee d'un ustensile dolt etre positionnee de sorte qu'elle

est tournee vers I'interieur et non au-dessus des elements

de surface adjacents.

• Ne pas faire cuire sur une table de cuisson endommagee -

Si la table de cuisson est brisee, les solutions de

nettoyage et les renversements peuvent penetrer dans la

table brisee et creer le risque d'un choc electrique.

Contacter immediatement un technicien qualifi&

• Nettoyer la table de cuisson avec prudence - Si une

eponge ou un chiffon mouille est utilise pour essuyer les

renversements sur une surface de cuisson chaude, eviter

les brOlures causees par la vapeur chaude. Certains

nettoyants peuvent produire des emanations desagreables

Iorsqu'ils sont utilises sur une surface chaude.

Pour lea appareils avee hotte de ventilation -

• Nettoyer les hottes de ventilation frequemment - La

graisse ne dolt pas s'accumuler sur la hotte ou le filtre.

• Lorsque vous flambez des aliments sous la hotte, mettre le

ventilateur en marche.

Pour lea appareils b _l_ments en spirale -

S'assurer que les cuvettes de proprete sont en place -

L'absence de ces ouvettes au oours de la cuisson peut

causer des dommages aux ills ou aux composants en

dessous des elements.

Garnissages protecteurs - Ne pas recouvdr les cuvettes

de papier d'aluminium saul tel que suggere dans le

manuel. L'installation incorrecte de papier d'aluminium ou

autre materiau peut causer un risque de choc electrique ou

d'incendie.

• Ne pas tremper les elements de chauffage amovibles -

Les elements de chauffage ne doivent jamais etre

immerges dans I'eau.

CONSERVEZ CES INSTRUCTIONS

• J

PIECESETCARAC RISTIQUES-COMMANDESTACTILES

Ce manuel couvre differents mod_les. La table de cuisson que vous avez achetee peut comporter tous les articles enum6r6s ou

seulement certains d'entre eux. L'emplacement et I'apparence des caract6ristiques illustr6es peuvent ne pas correspondre & ceux de

votre module.

Tableaux de commande

ModUle GJC3055 (30" [77,1 cm])

Commandes electroniques tactilee

ModUle GJ03655 (36" [91,4 cm])

Commandee electroniques tactiles

L L.......... C

A. Commande tactile arriere

gauche (fonction de mijotage;

fonction de maintien au chaud)

B. Commande tactile artiste droite

(fonction de mi/otage; fonction

de maintien au chaud; _l_ment

dimension double)

C. Commande tactile

d'augmentation/diminution de

la temperature

D. T#moin /umineux de surface

chaude

E D

E.Commande tactile avant

droite (tbnction de mijotage;

fonction de maintien au

chaud)

£ Control lock/Aft off

(verrouiftage des

commandes/toutes

commandes #teintes)

G. Commande tactile avant

gauche (fonction de

mijotage; fonction de

maintien au chaud; element #

dimension double)

H G F E

A, Commande tactile arriere gauche

(fonction de mijotage; fonction de

maintien au chaud)

B. Commande tactile centrale arriere

(fonction de mijotage; fonction de

maintien au chaud; element

dimension double)

C. Commande tactile arriere droite

(fonction de mi/otage; fonction de

maintien au chaud)

D. Commande tactile

d'augmentation/diminution de la

temperature

E. Temoins lumineux de surface

chaude

F, Commande tactile avant droite

(fonction de mijotage; fonction

de maintien au chaud)

G, Control lock/Aft off

(verrouillage des commandes/

toutes commandes eteintes)

H. Commande tactile avant

gauche (fonction de mijotage;

fonction de maintien au chaud;

el6ment a dimension double)

Tables de cuisson

Mod_le b commande _lectronique tactile de 36" (91,4 cm) illusb'_

B C D

i i

', / / ....., .....

A _

F E

A. Table de cuisson en vitroceramique

B. Zone de cuisson a la surface arri&re

gauche

C. Zone de cuisson a la surface centrale

arriere (avec element a dimension

double)

D.Zone de cuisson a la surface arriere droite

E. Tableau de commande

F. Zone de cuisson # la surface avant droite

G. Zone de cuisson b la surface avant

gauche (avec dl6ment # dimension

double)

H, Plaque signaletique de numero de

modele et de s6rie (situ6e sous la

table de cuisson sur la caisse en

m#tal)

COMMANDESDELATABLEDECUISSON-COMMANDESTACTILES

Risque d'incendie

Fermer tous les r_glages Iorsque la cuisson est

termin_e.

Le non-respect de cette instruction peut causer un

d_c_s ou un incendie.

Les commandes electroniques tactiles offrent une grande vari6t_

de r6glages de chaleur pour des r6sultats de cuisson optimaux.

Lorsqu'on fait fondre des aliments comme du chocolat ou du

beurre ou Iorsqu'on fait lever du pain, la zone de cuisson h la

surface peut 6tre r6gl6e a WARM HI (maintien au chaud - 61ev6)

pour un fonctionnement minimal de I'el6ment.

Pour un fonctionnement maximal de 1'616ment,toutes les

commandes tactiles de la table de cuisson peuvent 6tre r6gl6es

HI (61ev_) Iorsqu'on porte un liquide a _bullition rapidement.

Appuyer sur la touche "moins" (-) pour atteindre imm_diatement

le reglage HI (61ev_)

Utilisation :

1. Appuyer sur ON/OFF (marche/arr6t).

2. Appuyer sur les touches "+" ou "-" pour augmenter ou

diminuer la puissance.

3. Pour selectionner un niveau de puissance entre HI (eleve) et

WARM LO (maintien au chaud - bas), appuyer sur une des

touches "+" ou "-" jusqu'h ce que le niveau d_sir6 soit atteint.

4. A la fin de la cuisson, appuyer sur ON/OFF (marche/arr6t)

pour _teindre la ou les zone(s) de cuisson a la surface

individuellement, ou appuyer sur ALL OFF (routes

commandes 6teintes) pour _teindre tousles 61_ments en

m6me temps.

Utiliser le tableau suivant comme guide Iors du r6glage des

niveaux de chaleur.

REGLAGE UTILISATION RECOMMANDEE

HI (61ev6) • Pour commencer la cuisson

des aliments.

• Pour porter un liquide &

ebullition.

Medium High

(moyen 61ev6)

Entre 9et6

MED

Medium (moyen)

Pour maintenir une ebullition

rapide.

Pour brunir ou saisir

rapidement les aliments.

Pour maintenir une 6bullition

lente.

Pour faire frire ou sauter les

aliments.

Medium Low (moyen • Pour cuire les soupes et les

has) sauces.

Entre 4 et 2

• Pour faire mijoter ou 6tuver les

aliments.

SIMMER HI

(mijotage - 61ev6)

• Mijotage de plus grandes

quantites d'aliments dans des

ustensiles de grande taille.

• Mijotage avec un couvercle.

SIMMER LO

(mijotage - bas)

• Mijotage de plus petites

quantites d'aliments darts des

ustensiles de petite ou

moyenne taille.

• Mijotage sans couvercle.

WARM HI (maintien au • Pour maintenir au chaud de

ehaud - 61eve) plus grandes quantites

d'aliments.

• Pour faire fondre le choeolat

ou le beurre.

WARM LO (maintien • Pour maintenir au chaud de

au chaud - bas) plus petites quantit_s

d'aliments.

lelements doubles • Ustensile de cuisson &grand

diam_tre.

• Grandes quantites de

nourriture.

• Preparation de conserves a la

maison.

I N'OUBLIEZ PAS : Quand I'appareil est utilise, toute la I

surface de la table de cuisson peut devenir chaude.

T_moins lumineux de surface chaude

Les temoins lumineux de surface chaude sont situes pros de

chaque commande tactile de la table de cuisson. Les t6moins

lumineux de surface chaude restent allumes tant qu'une zone de

cuisson & la surface est trop chaude pour 6tre touchee, m6me

apr_s que la ou les zone(s) sont 6teintes.

A ................ dr

W m o"J

A. T_moin lumineux de surface chaude

Si une panne de courant survient alors que la table de cuisson

est allum6e, les t6moins lumineux de surface chaude resteront

allumes jusqu'a 45 minutes apr6s le r6tablissement de

I'alimentation 61ectrique & la table de cuisson.

Les 616ments a dimension double offrent une souplesse

d'utilisation en fonction de la taille de I'ustensile de cuisson.

L'61_ment simple peut 6tre utilis_ de la m6me mani_re qu'un

element ordinaire. L'el6ment double combine les 616ments

interne et externe; il est recommand6 pour les ustensiles de

cuisson de plus grande dimension, pour les grandes quantites de

nourriture et la preparation de conserves a la maison.

j/._ - .

/ \

A. Dimensionsimple

B. Dimensiondouble

Utilisation :

1. Appuyer sur ON/OFF (marehe/arr6t).

2. Appuyer sur HEAT ZONE SIZE (taille de la zene chauffee)

pour s61eetionner le diam_tre de la zone d6sir6.

3. S_leetionner un niveau de puissance entre HI et WARM LO.

Appuyer sur la touche "+" eu "-" pour augmenter ou diminuer

la puissance.

4. ,&la fin de la cuisson, appuyer sur ON/OFF (marche/arr6t)

pour 6teindre la ou les zone(s) de cuisson & la surface

individuellement, ou appuyer sur ALL OFF (routes

eemmandes 6teintes) pour _teindre tousles _l_ments en

m_me temps.

Les commandes tactiles ALL OFF de la table de cuisson

6teignent toutes les zones de cuisson a la surface.

La commande tactile de verrouillage des commandes de la table

de la cuisson pr6vient I'utilisation non intentionnelle des zones de

cuisson _ la surface. Lorsque la table de cuisson est verrouillee,

les zones de cuisson & la surface ne peuvent pas 6tre allumees

au moyen des commandes tactiles de la table de cuisson.

Pour verrouiller la table de cuisson : Appuyer sur la touche

CONTROL LOCK/ALL OFF pendant 5 secondes. Au bout de

5 secondes, CONTROL LOCK s'allume en rouge, indiquant que

les commandes tactiles de la table de cuisson sont en position

verrouill6e.

Pour d6verrouiller la table de cuisson : Appuyer sur la touche

CONTROL LOCK/ALL OFF pendant 5 secondes.

Risque d'empoisonnement alimentaire

Ne pas laisser des aliments reposer plus d'une heure

avant ou apr_s la cuisson.

Le non-respect de cette instruction peut causer un

empoisonnement alimentaire ou une maladle.

Les fonctions WARM HI (maintien au chaud - 61ev6) et WARM LO

(maintien au chaud - bas) peuvent 6tre utilisees pour garder des

aliments cuits au chaud; elles peuvent 6tre utilis6es que les

autres zones de cuisson a la surface soient utilisees ou non.

Une heure est la duree maximale recommandee pour maintenir la

qualit_ des aliments.

Les fonctions WARM HI et WARM LO sont disponibles sur tous

les 616ments de cuisson _ la surface.

La position WARM HI fournit un r6chauffage a temp@ature plus

elev6e. La fonction WARM HI est parfaite egalement pour faire

fondre du chocolat ou du beurre.

Elle n'est pas recommand6e pour faire chauffer des aliments

froids. Lorsqu'on utilise les fonctions WARM HI ou WARM LO, le

t6moin lumineux ne devient pas rouge comme les zones de

cuisson, mais il s'allume sur le tableau de commande.

Utiliser seulement les ustensiles et plats recommand6s pour

I'utilisation au four et sur la table de cuisson, et qui ont un fond

plat permettant un contact direct avec la surface de la table de

cuisson. Utiliser des mitaines de four ou des poign6es pour

retirer les ustensiles.

Couvrir tousles aliments avec un couvercle ou du papier

d'aluminium. Ne pas utiliser de pellicule de plastique pour couvrir

les aliments car elle pourrait fondre sur la surface de la table de

cuisson. Lors du r6chauffage de produits de boulangerie, pr6voir

une petite ouverture pour laisser I'humidit6 s'6chapper.

La qualit6 des aliments peut se d_t@iorer si on les laisse sur la

fonction WARM LO pendant une Iongue p@iode. Pour obtenir les

meilleurs resultats, ne pas maintenir les aliments au chaud plus

de 30 a 45 minutes.

Utilisation de la fonction WARM LO :

1. Appuyer sur ON/OFF (marche/arr6t).

2. Appuyer une fois sur la touche "plus" (+) pour WARM LO.

3. ,&,la fin de la cuisson, appuyer sur ON/OFF (marehe/arr6t)

pour 6teindre la zone de cuisson & la surface.

Utilisation de la fonction WARM HI :

1. Appuyer sur ON/OFF (marche/arr¢t).

2. Appuyer deux fois sur la touche "plus" (+) pour WARM HI.

3. h, la fin de la cuisson, appuyer sur ON/OFF (marche/arr¢t)

pour @teindre la zone de cuisson a la surface.

La page charge ...

Whirlpool GJC3055RP06 Le manuel du propriétaire

Marque: Whirlpool

Modèle: GJC3055RP06

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool GJC3055RP06 Owner's manual

Whirlpool GJC3055RP06 Le manuel du propriétaire

Whirlpool GJC3055RP06 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents