Anself TR-BAS20-2USB Guide d'installation

Taper
Guide d'installation
INSTALLATION INSTRUCTIONS
TR-BAS
15
2 0
-2USB
Dual USB Charger with
15A/20A Duplex Tamper Resistant Receptacle
SPECIFICATION
Receptacle
Rating.......................................................15A/20Amp,125VAC
USB Rating...............................Two USB ports with total 4 Amp, 5VDC
Wire Teminals...................................................................#14-#10AWG
Operating Temperature....................................-4 to 140(-20 to 60)
USB Compatibility..USB 1.1/2.0/3.0 devices, including Apple products
Strip Length.................0.5inch(back wire holes). 1inch(screw terminal)
FEATURES
2USB ports with a super high-current power of 4 Amp, 5VDC
Charge most compatible electrical device directly without an adapter
Tamper-Resistant Shutters provide compliance with 2011 NEC Code
Replace a standard duplex receptacle
Back and side wire for easy installation
UL listed
DESCRIPTION
The TR-BAS
15
2 0
-2USB USB Charger/Tamper-Resistant Receptacle
offers two USB charging ports and duplex Tamper-Resistant
Receptacle. This TR-BAS
15
2 0
-2USB is able to charge any current
electronic devices simultaneously, including smart phones, tablets,
e-readers, cameras and MP3 players. Whats more, it has the
capability to charge new device required higher current rating in the
future. All you will need is a USB cable to connect to one of the two
USB ports.
APPLICATION
Cafes
Labs
Office
Hospital
Kitchens
Salons
Bedrooms
Hotels
Restaurants
Schools
Meeting Rooms
Libraries
Airport Lounges
Workstations
-01-
COMPATIBILITY
The TR-BAS
15
2 0
-2USB Charger-Resistant Receptable is compatible
with a wide range of electronic devices including, but not limited to the
following:
-iPad
®
-iPhone
®
-iPad
®
Mini
-iPod
®
-Tablets
-GPS
-Mobile Phones
-Galaxy Tab
TM
-Blackberry
®
, Android Phones
-Bluetooth
TM
Headsets
-Windows
®
Phone by HTC
-Digital Cameras
-Kindle
TM
, Nook e-reader
-Other USB compatible products
If the devices combined power requirements exceed the power
capacity of the USB Ports, the charger will automatically shut down to
protect your devices.
Charges most USB powered devices
INSTALLATION
WARNING:To avoid fire, shock, or death. Turn off power at circuit
breaker or fuse and test that power is off before wiring.
AVESTISSEMENT: Pour éviter un incendie, des chocs ou le décès,
couper le courant au disjoncteur ou au fusible et vérofoez que
Ialimentation est coupée avant de cabler.
To be installed and /or used in a accordance with appropriate electrical
codes and regulations.
Pour étre installé et/ou utilisé comformément aux codes et aux rè
glements électriques appropriés.
-02-
If you are unsure or uncomfortable about performing the installation,
please consult a qualified electrician.
Si vous nètes pas sür ou mal à Iaise deffecturer Iinstallation, vous á
pouvez consulter un électricien qualifiè.
1. For retrofit applications, remove wall plate and mounting screws.
2. Carefully remove the existing receptable from the box.
3. Disconnect the wiring from the old receptacle.
4. Connect the TR-BAS15-2USB per wiring diagram: black lead to hot
wire, white lead to neutral wire, green lead to ground wire.
5. Tighten every screws and no bare conductors are exposed, 9-12
pound inch(1.0-1.4Nm) of torque.
6. Insert the TR-BAS
15
2 0
-2USB in wall box with screws provided and
mount wall plate.
7. Restore power at circuit breaker, installation is complete.
Wiring Diagram
Cu Al
WARRANTY INFORMATION
Our company warranties this product to be free of defects in materials
and workmanship for a period of two(2) years, There are no
obligations or liabilities on the part of our company for consequential
damages arising out of, or in connection with, the use or performance
of this product or other indirect damages with respect to loss of
property, revenue, or profit, or cost of removal, installation or
reinstallation.
-03-
  • Page 1 1
  • Page 2 2

Anself TR-BAS20-2USB Guide d'installation

Taper
Guide d'installation

dans d''autres langues