Miele 52850705USA Mode d'emploi

Operating and Installation Instructions

PT 8257

PT 8337

PT 8407

PT 8507

To prevent accidents and machine damage

read these instructions before installing or use.

M.-Nr. 07 713 522

en, fr - US, CA

2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operating panel .............................................................................7

Drying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Before first use ..............................................................................9

Preparing the laundry .........................................................................9

1. Turn on the dryer .........................................................................10

2. Load the laundry..........................................................................10

3. Select a program .........................................................................11

4. Select [ "Blockplus" (if desired) ............................................................11

5. Adjust the program (if desired)...............................................................12

6. Select Delay Start (if desired) ................................................................13

7. Start a program...........................................................................14

8. End of program...........................................................................14

Extra features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Add or remove laundry during a program ........................................................15

Skip or repeat program sequences .............................................................15

Program stop ..............................................................................16

Canceling a program ........................................................................16

K Information ...............................................................................16

Estates ...................................................................................18

Program guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Basic programs ............................................................................21

Comforters ................................................................................23

Cleaning Contractors ........................................................................23

Fire Department ............................................................................24

Professional cleaners ........................................................................24

Chip card use / Coin mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Drying using the coin mechanism C 4060 / C 4065 / C 4070 .........................................26

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Cleaning the lint filter ........................................................................27

Dryer .....................................................................................27

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Fault messages.............................................................................28

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Leveling the dryer ...........................................................................34

Installation on an elevated base ................................................................34

Coin mechanism ............................................................................35

Communication module XKM RS232 ............................................................35

Electrical connection ........................................................................36

Air intake / Venting ..........................................................................36

Hot water connection ........................................................................36

Steam connection ...........................................................................36

Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . 37

Guide to the data plate symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Help to protect the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Quick Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Contents

3

Explanation of safety instructions and

warnings on the dryer

Read the operating instructions.

Read all the instructions, e.g. the

installation instructions.

Caution, hot surfaces.

Caution, voltage up to 1000 V

Grounding

,READ AND SAVE THESE INSTRUCTIONS

Keep these operating instructions in a safe place and

pass them on to any future user.

Read all instructions before installation or use of the

dryer to prevent injury and machine damage.

This dryer is only intended for industrial or institutional

use and should not be used by anyone who is not

specially trained to operate it. This also applies to

industrial applications performed in residential

environments.

This machine conforms to current safety requirements.

However, inappropriate installation and use can lead to

personal injury and property damage. Read the

operating and installation instructions carefully before

using this machine.

Installation, repair and maintenance work should be

performed by a Miele authorized service technician.

Work by unqualified persons could be dangerous

Improper use of the appliance can lead to personal

injury and material damage.

All personnel working with this machine must be fully

trained in all aspects of its use and safety.

Proper use of the dryer

~

The dryer is only intended for drying fabrics that were

washed with water as a cleaning agent. Check fabric care

labels to verify that the articles can be machine dried.

~

To prevent fire, do not dry the following (with the

exception of the textiles permitted in the special programs):

–

Articles containing foam rubber, rubber or rubber-like

materials.

–

Articles that have been treated with flammable cleaning

agents.

–

Articles that have been contaminated with hair spray,

nail polish remover, etc.

–

Articles that may be greasy, oily or that may contain

other residues, e.g. kitchen or salon laundry.

–

Mops, floor cloths, etc. if they contain substances such

as wax or chemical cleaning agents.

–

Damaged padded or filled fabrics such as jackets or

cushions.

–

Articles that are not sufficiently clean and are soiled with

grease or oil. Wash very dirty articles (e.g. work clothing)

with a special detergent. For information in this regard,

consult a cleaning agent retailer.

With sensitive fabrics there may be a danger of them

spontaneously combusting if dried too long. Immediately

remove the laundry at the end of the drying program and

after a power failure.

Keep a fire extinguisher near the dryer.

~

The laundry must not be removed from the dryer until

the cooling down phase has been completed.

If hot laundry items are stacked or packed they could

spontaneously combust.

~

Empty all pockets so that no flammable items such as

lighters, matches, candles and cosmetics end up in the

dryer.

~

If the dryer is operated in a publicly accessible area, the

operator must ensure the safe use of the appliance.

IMPORTANT SAFETY INSTRUCTIONS

4

Safety

,

The dryer is only intended for drying fabrics that

were washed with water as a cleaning agent.

~

Operate the dryer only if an exhaust air duct is

connected and the room is adequately ventilated.

~

Persons who lack physical, sensory or mental abilities,

or experience with the appliance should not use it without

supervision or instruction by a responsible person.

~

Do not let children play in, on or near the dryer. Do not

let them play with the controls or operate the unit.

~

Always close the door after loading or unloading the

dryer, to prevent:

–

children from climbing into the dryer, or hiding small

items in the dryer.

–

small animals from climbing into the dryer.

~

Do not operate the appliance if the control panel, wires

or cables are damaged.

~

Do not damage, remove, or bypass any of the safety

features and controls of the dryer.

~

Do not operate the dryer when housing parts have been

removed and the moving or electrical parts are exposed

and accessible.

~

High temperatures occur at the window and frame of

the drum door. The laundry is extremely hot if it is removed

too soon. Burn hazard!

~

Do not touch the steam components (depending on

model). Scalding hazard!

~

Always make sure the drum is stationary before

reaching in to remove laundry. Never put your hand into a

drum that is still moving.

~

Take care not to pinch or cut your fingers on the hinges

of the drum door or lint flap. Use the handles.

~

The area necessary to open the drum door completely

must not be obstructed by doors or other structures.

~

Do not use the dryer without the built-in lint filter in

place. Fire hazard!

If the lint filter is damaged it must be replaced immediately.

~

Never use or store gasoline, petroleum-based

substances or other easily flammable substances near the

machine. Fire and explosion hazard!

~

A build-up of lint will block the airflow, heating and

ventilation, which will impair the efficiency of the dryer. Be

sure to clean the lint filter before or after each load.

~

Do not use a power washer to clean the dryer.

~

Remove the door to the drying compartment before the

appliance is removed for service or discarded.

~

Disinfection and cleaning agents often contain chlorine

compounds. If these agents dry on stainless steel it will

cause it to rust. To protect the dryer use only chlorine-free

disinfection and cleaning agents for laundering and

disinfecting, and for cleaning the stainless steel surfaces. If

in doubt about a cleaning agent, contact the manufacturer.

If an agent containing chlorine is spilled, wash it off with

water and dry with a soft cloth.

Electrical safety

~

Be certain this appliance is properly installed and

grounded by an authorized technician. For electrical safety

this machine must be grounded z. It is imperative that this

basic safety requirement be tested by a qualified

electrician. Consult a qualified electrician if in doubt.

~

Before installation or service, disconnect the power

supply to the work area.

~

Repairs to electrical and gas appliances should only be

carried out by a Miele Service Technician in accordance

with local and national safety regulations. Unauthorized

repairs could cause injury or machine damage.

~

Use only genuine Miele parts. Use of non-Miele parts

may impair performance and void any guarantees.

~

Do not repair or replace any part of the appliance or

attempt any servicing unless specifically recommended in

these operating instructions. Contact Miele’s Technical

Service Department for assistance.

~

Do not operate the dryer in a room where cleaning

machines operate with solvents containing CFC. Vapors

from combustion turn into hydrochloric acid which

damages laundry and dryer. When operated in a separate

room, there must be no air exchange possible. Make sure

the dryer is supplied with clean fresh air only.

~

The air intake opening is located on the back of the

dryer. Never block this opening. Therefore, do not cover

the dryer top with any blankets or sheets.

~

The dryer needs timely and professional maintenance to

prevent performance loss, malfunctions and the risk of fire.

SAVE THESE

INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

5

a Emergency Stop button

Use only in case of an emergency.

After elimination of the problem, unlock the switch by

turning the dial to the right.

Do not use the Emergency Stop button to turn off

the dryer during normal operation!

b Control panel

c Drum door

Pull the door handle to open the drum door.

d Lint filter flap

Pull the handle to open the lint filter flap.

e Four height adjustable feet

f Electrical connection

g Air intake opening

h Exhaust air collar

i Potential equalizer

j Communication module slot

Description of the appliance

6

f

g

h

j

i

ab

c

d

e

Operating panel

a Display*

1 White Cottons 0%

2 Cottons 0%

3 Cottons Hot Wash 0%

FC A

After turning on, the "Welcome" display will appear for

a short time followed by the program list. The most

recently used program is highlighted.

b Function keys

The keys have different functions depending on the

appliance status. The functions are shown in the

display above the buttons.

c Start button

The light ring flashes if a selected program can be

started or a selection can be made.

Once a program has started the Start button can be

pressed to show the original display.

* Contents in the display will vary with program

offering.

d Optical PC interface

For data transfer between the machine’s controls and

a PC.

e Jog shuttle

Turn the jog shuttle for display selections and input

fields.

Press the jog shuttle to confirm display selections or

changes.

f Card reader

If the machine has been programmed for card

operation, you can only use those programs stored

on the card to dry laundry.

g I On button

h 0 Off button

Description of the appliance

7

Control keys

f Stop / End

Press to stop a selected program or end an already

stopped program.

[ Block plus

The respective program block (e.g. pre-drying) will

be added to the program.

FC Functions

Press this key to temporarily select another language

and/or access the Supervisor level.

mDelay start

Press this key to select a start time in the display.

K Information

To show program information

ü Skip

Cycles of a program in progress can be skipped or

repeated.

A Back to the previous display

e/- Next or previous line

S Save

See the Programming Manual

$ Program locked

If a program has a "locked" status it cannot be

stopped or ended with the Off-button after one

minute.

% Program unlocked

\ Operating data

Data transfer

Operator card

No programs are saved on this card. To transfer the

data from the control to the card and vice versa see

the Programming Manual.

30 programs with 6 blocks each can be saved on the

card.

The back of the card can be labeled.

Insert the card, arrow first.

Description of the appliance

8

Before first use

^

Wipe the interior of the drum with a soft dry cloth

Preparing the laundry

,

Not all fabrics are suitable for drying in a

tumble dryer. Check the manufacturer’s

instructions on the fabric care label.

q = Dry at normal temperature

r = Dry at low temperature

s = Do not tumble dry

^

Sort the laundry by fabric type and color. This will

ensure even drying results and will prevent

damage to fabrics.

,

To prevent fire, do not dry the following

(with the exception of the textiles permitted in the

special programs):

Articles containing foam rubber, rubber or

rubber-like materials.

Articles that have been treated with flammable

cleaning agents.

Articles that have been contaminated with hair

spray, nail polish remover, etc.

Articles that may be greasy, oily or saturated with

other residues, e.g. kitchen or salon laundry.

Mops, floor cloths, etc. if they contain substances

such as wax or chemical cleaning agents.

Damaged padded or filled fabrics, like jackets or

cushions.

Articles that are not sufficiently clean and are

soiled with grease or oil. Wash very dirty articles

(e.g. work clothing) with a special detergent.

Important drying information:

–

Articles made from pure wool and wool mixtures

may become matted. Dry these with the Woolens

program only.

–

Pure linen may become rough with tumble drying.

Consult the manufacturer’s instructions before

drying.

–

Items with metal buckles, hooks, snaps, zippers,

etc. should be put into the dryer in a cloth bag

(e.g. pillow case) to protect the drum from

scratches and dents.

–

Articles with closed metal zippers may cause a

short at the sensor electrodes on the drum ribs, so

that the drying process ends too late or does not

end at all. These items should be dried with the

zippers open.

–

Loop knit materials tend to shrink. Over-drying

increases this effect. Do not use the highest dry

program for such fabrics.

–

Starched laundry can be tumble dried. Select a

program with a suitable residual moisture for

ironing by hand or machine.

Sort the laundry according to the level of dryness

required. It is not necessary to sort according to

size.

– Pillow cases and duvet covers should be buttoned

to prevent smaller items from getting caught inside

them.

– For cost efficiency, only dry full loads. Overloading

provides poor drying results and has an adverse

effect on fabrics.

–

If the washing machine's last rinse cycle is with

warm water, a shorter drying time will be required

due to the lower residual moisture and the residual

heat in the laundry.

Drying

9

1. Turn on the dryer

^

Open the gas or steam valve (on site).

^

Turn on the power main (on site).

^

Press the l "On" button to turn the dryer on.

The Welcome screen shows.

M

PROFESSIONAL

PT 8xx7

Welcome

The program list is displayed. The program last

started is highlighted.

1 White Cottons 0%

2 Cottons 0%

3 Colors 0%

FC A

2. Load the laundry

^ Open the drum door.

^ Load the laundry loosely into the drum.

Check that there are no foreign objects in the

drum, e.g. wash dosage containers, coins, etc.

^ Close the drum door.

To prevent fabric damage, check that laundry will

not be caught in the closed door.

Maximum laundry weight

PT 8257 PT 8337 PT 8407 PT 8507

Drum volume

66 gal

(250 l)

86 gal

(325 l)

106 gal

(400 l)

132 gal

(500 l)

Cottons

22-29 lb

(10-13 kg)

29-35 lb

(13-16 kg)

35-44 lb

(16-20 kg)

44-55 lb

(20-25 kg)

Wrinkle-free

11 lb

(5 kg)

14.5 lb

(6.6 kg)

17.6 lb

(8 kg)

22 lb

(10 kg)

Woolens

9lb

(4 kg)

11.5 lb

(5.2 kg)

14 lb

(6.4 kg)

17.5 lb

(8 kg)

Delicates/Synthetics

4.5 lb

(2 kg)

6lb

(2.6 kg)

7lb

(3.2 kg)

9lb

(4 kg)

Hot/Cool air

22-29 lb

(10-13 kg)

29-35 lb

(13-16 kg)

35-44 lb

(16-20 kg)

44-55 lb

(20-25 kg)

Proofing, Outerwear

11-14.5 lb

(5-6.6 kg)

13-20 lb

(6-9 kg)

17.5-24 lb

(8-11 kg)

22-29 lb

(10-13 kg)

See "Adjust the program - Laundry weight" for more

information.

Drying

10

3. Select a program

The dryer uses an electronic sensor system which

monitors the residual moisture in the laundry and a

timer for extra safety.

Once the required level of dryness has been reached

the laundry is cooled and the drying program will

end.

1 White Cottons 0%

2 Cottons 0%

3 Colors 0%

FC A

^

Select a program by turning the jog shuttle (e.g.

Program 2 Hot Wash / Cottons dry).

See the "Program Guide" for more information on

the standard programs.

4. Select [ "Blockplus" (if desired)

(Not available for standard programs)

^

Confirm the selected program by pressing the jog

shuttle.

22 Hot Wash / Cottons dry 22.0 / 22.0 lb

15 % Drying 176 °F

Cool down e

[ m A

^

Press the [ "Blockplus" button to select a

program block, e.g. pre-drying if desired.

22 Hot Wash / Cottons dry 22.0 / 22.0 lb

24 % Pre-drying

0 % Drying e

[ m A

The field [ is highlighted.

The function can be deselected by pressing the

button again.

If you do not need to make any other changes to the

program:

^ Press the "START" button and the drying program

will begin.

Drying

11

5. Adjust the program (if desired)

To change program settings before starting the

program:

^

Confirm the selected program by pressing the jog

shuttle.

2 Cottons 22.0 / 22.0 lb

0 % Drying 176°F

Cool down e

m A

The maximum laundry weight is shown on the right

side in the display.

Laundry weight

The laundry weight can be manually selected.

2 Cottons 22.0 22 lb

0 % Drying 176°F

Cool down e

m A

^ Turn the jog shuttle until "Laundry weight" is

highlighted and press to confirm the selection. Turn

the jog shuttle to the desired laundry weight and

press to confirm the selection.

Temperature

In 1 °F or °C steps from 86 °F / 30 °C to max. 203 °F /

95 °C.

^ Turn the jog shuttle to "Temperature" and press to

confirm the selection.

2 Cottons 22.0 lb

0 % Drying 176°F

Cool down e

m A

^

Turn the jog shuttle to the desired temperature and

press it to confirm the selection.

Residual moisture

In 1 % steps from -4 to 40 %.

^

Turn the jog shuttle to "Residual moisture" (0 %)

and press to confirm the selection.

2 Cottons 22.0 lb

0% Drying 176°F

Cool down

m A

^

Turn the jog shuttle to the desired percentage and

press it to confirm the selection.

^

Press the "Start" button to begin the program.

The program sequence is shown in the display after

the start of the program.

2 Cottons

0 % Drying >40 %{

Cool down Finish at 12:35

mKf

In the second display line, "Drying" in the display

above, the actual residual moisture is shown (>40%)

and if the heating { is active. The third line shows the

following program block.

The "Finish at 12:35" on the right side shows the end

time of the program.

The "Finish at" display has a self learn function.

Several program cycles are necessary for an exact

display.

Drying

12

6. Select Delay Start (if desired)

Use the m "Delay start" button to start a program at a

later time.

Setting the delay start

^

Select a program.

^

Press m "Delay Start".

2 Cottons 22.0 lb

Start time: 2 :10 pm Start date: 2.13.2006

After setting the delay start press Start.

m A

The display shows the current time of day and date.

The hour entry field is highlighted.

^

Turn the jog shuttle to the "Hours" entry field. Press

the jog shuttle to select the hour. Turn the jog

shuttle to the desired hour and press it to confirm

the selection.

^

Turn the jog shuttle to the "Minutes" entry field.

Press the jog shuttle to select the minutes. Turn the

jog shuttle to the desired minutes and press it to

confirm the selection.

^ Turn the jog shuttle to the "Start date" entry field.

Press the jog shuttle to select the start date. Turn

the jog shuttle to the desired date and press it to

confirm the selection.

^ Press the "Start" button.

The program will start at the selected time.

2 Cottons 22.0 lb

0 % Drying

2:07pm -2.13.2006 Start: 2:10pm-2.13.2006

m A

The display shows the current time of day, date and

the start time.

^

If the door is opened before the delay start time

has elapsed, press the "Start" button again.

Canceling the Delay Start

^

Press the m "Delay Start" or A "Back" button to

cancel the delay start function.

Drying

13

7. Start a program

^

Press the "Start" button to begin the program..

8. End of program

2 Cottons

Program end

Anti-crease Finish at 12:35

m FC Kf

The program end is shown in the display and the

buzzer sounds.

^

Open the drum door.

^

Remove the laundry.

If the laundry is not removed from the machine at the

end of the program an anti-crease cycle will

automatically start. The drum turns in intervals to

minimize creasing in the laundry.

,

The laundry must not be removed from the

dryer before the drying program has finished. The

cooling down phase must be completed.

If hot laundry items are stacked or packed they

could spontaneously combust.

^ Check the lint filter and clean if necessary.

Close lint filter flap, trip hazard.

2 Cottons

Program end

Caution: Lint filter is clogged

A

A reminder will appear in the display when the filter

needs to be cleaned.

^

Clean the lint filter immediately after the program

ends.

^

Close the drum door.

^

Press the 0 "Off" button to turn off the machine.

^

Turn off power at the power mains (on site).

^

Close the on site gas or steam valve.

Drying

14

Add or remove laundry during a program

The drum door can be opened during a program to

add or remove laundry.

^

Open the door.

,

Make sure the drum is stationary before

removing laundry. Never put your hand into a

drum that is still moving.

2 Cottons

Program stop

Door is open. Close the door.

FC f

^

Add or remove a laundry item.

^

Close the door.

The fan may come on as a safety measure if the

temperature in the drum is too high.

^

Press the "Start" button.

The program continues.

Skip or repeat program sequences

Sequences of a program in progress can be skipped

or repeated.

^

Press the f "End" button to stop the program.

2 Cottons

Program stop

Press Start.

ü f

^

Press the ü "Skip/Repeat" button.

The display shows the current program segment. See

"Program structure" in the Programming Manual.

Skip/Repeat -> 2 Cottons

Program stop

Area 1: Drying e

S A

Area 1: Drying

Block 1: Pre-drying

-

S A

^ Turn the jog shuttle to "Area" and press it to confirm

the selection.

Area: Select 1 Drying or 2 Cooling and confirm.

^ Turn the jog shuttle to "Block" and press it to

confirm the selection.

Block: Select Drying 1-10 or Cooling 1-10 and

confirm.

^

Press the S "Save" and "Start" button to skip the

program cycles.

^

To go back without skipping program cycles:

Press the A "Back" to go back to the program

stop.

Extra features

15

Program stop

^

Press the f "End" button to stop the program.

2 Cottons

Program stop

Press Start.

ü f

^

Press the "Start" button to continue the program.

Canceling a program

To cancel a program, press the f "End" button twice.

K Information

^

Press the K "Information" button during the program

to see program information.

Examples:

2 Cottons

Delay start: 10.7.2003

Start time: 9:47 e

m K f

Time after Start:0h23min

Time left:0h11min

Program end time: 10:21 pm e

Area 1: Drying

Block 1: Pre-drying

Actual exhaust air temp.: 138 °F e

Reference supply air temperature : 302 °F

Peak load: No

Anti-crease: 3s./87s./60min e

2 Cottons

Recirculation/vent flap: Recirculation -

Block end signal: Yes

A

^ Press the A "Back" button to get back to the

program sequence.

Extra features

16

Language

The display language can be temporarily changed

with the flag symbol.

1 White Cottons 0%

2 Cottons 0%

3 Colors 20%

FC A

^

Press the FC function button.

Settings Back <-

Main menu Language

Programming level

FC A

^

Press the jog shuttle to select "Language".

Settings svenska

Language english (USA)

Back <-

FC A

^ Turn the jog shuttle to select the desired language

and press to confirm the selection.

When the selection is confirmed the display switches

to the selected language.

The language is set back to its original setting:

– if no activity was carried out for 5 minutes.

– 5 minutes after the program has ended.

–

when the door is opened.

Extra features

17

Estates

Program Fabric Type max. load

White Cottons White items made of cottons, linens PT 8257 22-29 lb

(10-13 kg)

PT 8337 29-35 lb

(13-16 kg)

PT 8407 35-44 lb

(16-20 kg)

PT 8507 44-55 lb

(20-25 kg)

165 °F

Cottons White or colored items made of cottons, linens or mixed fabrics

165 °F

Colors Colored items made of cottons, linens or mixed fabrics

165 °F

Darks Dark items made of cottons, linens or mixed fabrics

165 °F

Minimum iron Items made of synthetic fabrics, mixed fabrics PT 8257 11 lb

(5.0 kg)

PT 8337 14.5 lb

(6.6 kg)

PT 8407 17.5 lb

(8.0 kg)

PT 8507 22 lb

(10 kg)

140 °F

Delicates Items made of synthetic fabrics, mixed fabrics PT 8257 4.4 lb

(2 kg)

PT 8337 6 lb

(2.6 kg)

PT 8407 7 lb

(3.2 kg)

PT 8507 9 lb

(4 kg)

104 °F, Dry to 20% residual moisture

600+TC Sheets Hot Bed linens high thread count sheet

made of cottons, mixed fabrics

PT 8257 22-29 lb

(10-13 kg)

PT 8337 29-35 lb

(13-16 kg)

PT 8407 35-44 lb

(16-20 kg)

PT 8507 44-55 lb

(20-25 kg)

140 °F

600+TC Sheets

Warm

Bed linens high thread count sheet

made of cottons, mixed fabrics

PT 8257 11 lb

(5.0 kg)

PT 8337 14.5 lb

(6.6 kg)

PT 8407 17.5 lb

(8.0 kg)

PT 8507 22 lb

(10 kg)

140 °F

Silk and Rayon

Bed Linens

Bed linens made of silk, rayon, satin

140 °F

Down Comforters &

Pillows

Down comforters, duvet covers made of down PT 8257 22 lb

(10 kg)

PT 8337 29 lb

(13 kg)

PT 8407 35.5 lb

(16 kg)

PT 8507 44 lb

(20 kg)

165 °F, see load size in "Covers" section

Washable

Bedspreads

Blankets, covers made of synthetic fabrics

165 °F, see load size in "Covers" section

Extra features

18

Program Fabric Type max. load

Linen Tablecloths

165 °F

Tablecloths, napkins made of cottons, linens PT 8257 22-29 lb

(10-13 kg)

PT 8337 29-35 lb

(13-16 kg)

PT 8407 35-44 lb

(16-20 kg)

PT 8507 44-55 lb

(20-25 kg)

Mixed Fiber

Tablecloths

Tablecloths, napkins

made of synthetic fabrics, mixed fabrics

PT 8257 11 lb

(5.0 kg)

PT 8337 14.5 lb

(6.6 kg)

PT 8407 17.5 lb

(8.0 kg)

PT 8507 22 lb

(10 kg)

140 °F

Outerwear Coats and jackets made of mixed fabrics PT 8257 11-14.5 lb

(5-6,6 kg)

PT 8337 14.5-20 lb

(6,6-9 kg)

PT 8407 17.5-24.5 lb

(8-11 kg)

PT 8507 22-29 lb

(10-13 kg)

140 °F

Silks handcare Blouses, dresses, pants, skirts, coats, evening gowns,

wedding gown, faux furs made of silk, rayon, satin, acetate,

viscose

PT 8257 8.8 lb

(4 kg)

PT 8337 11.5 lb

(5.2 lb)

PT 8407 14 lb

(6.5 kg)

PT 8507 17.5 lb

(8 kg)

140 °F

Woolens handcare Woolens and mixed woolens

165 °F

Proofing Drying of waterproofed outdoor items PT 8257 11-14.5 lb

(5-6,6 kg)

PT 8337 14.5-20 lb

(6,6-9 kg)

PT 8407 17.5-24.5 lb

(8-11 kg)

PT 8507 22-29 lb

(10-13 kg)

140 °F

Hot air Drying small loads or finish drying single items PT 8257 22-29 lb

(10-13 kg)

PT 8337 29-35 lb

(13-16 kg)

PT 8407 35-44 lb

(16-20 kg)

PT 8507 44-55 lb

(20-25 kg)

165 °F

Cool air Airing/Fluffing items

Extra features

19

Program Fabric Type max. load

Smoothing

Cotton and linen fabrics

PT 8257 11 lb

(5.0 kg)

PT 8337 14.5 lb

(6.6 kg)

PT 8407 17.5 lb

(8.0 kg)

PT 8507 22 lb

(10 kg)

165 °F, Reduces wrinkles after the being washed. Remove items immediately after

program end and allow to air dry.

Denim

(Machine iron) 165 °F

Items made of denim

Shirts

(Machine iron) 165 °F

Shirts and blouses

Towelling

165 °F

Multi-layer fabrics and towels.

Towels, wash cloths, bath robes, etc.

PT 8257 22-29 lb

(10-13 kg)

PT 8337 29-35 lb

(13-16 kg)

PT 8407 35-44 lb

(16-20 kg)

PT 8507 44-55 lb

(20-25 kg)

Reactivate

140 °F

Outdoor clothing suitable for drying in a tumble dryer.

The fibers are straightened, improving water-repellency.

PT 8257 11-14.5 lb

(5-6,6 kg)

PT 8337 14.5-20 lb

(6,6-9 kg)

PT 8407 17.5-24.5 lb

(8-11 kg)

PT 8507 22-29 lb

(10-13 kg)

Automatic

140 °F

Mixed loads of fabrics for the Cottons and Wrinkle-free

programs.

PT 8257 11 lb

(5.0 kg)

PT 8337 14.5 lb

(6.6 kg)

PT 8407 17.5 lb

(8.0 kg)

PT 8507 22 lb

(10 kg)

Temperatures given refer to extracted air temperature.

Extra features

20

La page charge ...

Miele 52850705USA Mode d'emploi

Ce manuel convient également à

Miele 52850705USA Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents