Faure FWG3125 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
User
manual
Washing
Machine
ZWF12170W
ZWF14170W
126293505.qxd 14/11/07 13:10 Página 1
Por Susana Ruiz Moreno fecha 9:09 , 15/11/2007
2
Content
Safety information - - - - - - - - - - - - - - - - - - -3
Description of the appliance - - - - - - - - - - - -5
Detergent dispenser drawer - - - - - - - - - - - -5
Control panel and functions - - - - - - - - - - - -6
Programme table - - - - - - - - - - - - - - - - - - -7
Programme information - - - - - - - - - - - - - - -9
Washing Hints - - - - - - - - - - - - - - - - - - - - -10
Before the first use - - - - - - - - - - - - - - - - -12
Operating Sequence - - - - - - - - - - - - - - - -13
Care and cleaning - - - - - - - - - - - - - - - - - -17
Something not working - - - - - - - - - - - - - - 19
Technical data- - - - - - - - - - - - - - - - - - - - - 22
Consumption values - - - - - - - - - - - - - - - - 23
Installation instruction - - - - - - - - - - - - - - - 24
Environmental concerns - - - - - - - - - - - - - 28
Guarantee conditions - - - - - - - - - - - - - - - 29
European guarantee - - - - - - - - - - - - - - - - 30
Thank you for selecting our appliance
We wish you lots of enjoyment with your new appliance and we hope that you will consider our
brand again when purchasing household appliances.
Please read this user manual carefully and keep it throughout the product life cycle as a reference
document. The user manual should be passed on to any future owner of the appliance.
The following symbols are used in this manual:
Important information concerning your personal safety and information on how to avoid
damaging the appliance.
General information and tips
Environmental information
126293505.qxd 14/11/07 13:10 Página 2
3
Safety information
In the interest of your safety and to ensure
the correct use, before installing and first
using the appliance, read this user manual
carefully, including its hints and warnings.
To avoid unnecessary mistakes and
accidents, it is important to ensure that all
people using the appliance are thoroughly
familiar with its operation and safety
features. Save these instructions and make
sure that they remain with the appliance if it
is moved or sold, so that everyone using it
through its life will be properly informed on
appliance use and safety.
General safety
It is dangerous to alter the specifications or
attempt to modify this product in any way.
During high temperature wash programmes
the door glass may get hot. Do not touch it!
Make sure that small pets do not climb into
the drum. To avoid this, please check into
the drum before using.
Any objects such as coins, safety pins, nails,
screws, stones or any other hard, sharp
material can cause extensive damage and
must not be placed into the machine.
Only use the advised quantities of fabric
softener and detergent. Damage to the fabric
can ensue if you over-fill. Refer to the
manufacturers recommendations of
quantities.
Wash small items such as socks, laces,
washable belts etc in a washing bag or
pillow case as it is possible for such items to
slip down between the tub and the inner
drum.
Do not use your washing machine to wash
articles with whalebones, material without
hems or torn material.
Always unplug the appliance and turn off the
water supply after use, clean and
maintenance.
Under no circumstances should you attempt
to repair the machine yourself. Repairs
carried out by inexperienced persons may
cause injury or serious malfunctioning.
Contact your local Service Centre. Always
insist on genuine spare parts.
Installation
This appliance is heavy. Care should be
taken when moving it.
When unpacking the appliance, check that it
is not damaged. If in doubt, do not use it and
contact the Service Centre.
All packing and transit bolts must be
removed before use. Serious damage can
occur to the product and to property if this is
not adhered to. See relevant section in the
user manual.
After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not pressing the
electrical supply cable.
If the machine is situated on a carpeted floor,
please adjust the feet in order to allow air to
circulate freely under the appliance.
Always be sure, that there is no water
leakage from hoses and their connections
after the installation.
If the appliance is installed in a location
subject to frost, please read the «dangers of
freezing» chapter.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
126293505.qxd 14/11/07 13:10 Página 3
4
Use
This appliance is designed for domestic use.
It must not be used for purposes other than
those for which it was designed.
Only wash fabrics which are designed to be
machine washed. Follow the instructions on
each garment label.
Do not overload the appliance. See the
relevant section in the user manual.
Before washing, ensure that all pockets are
empty and buttons and zips are fastened.
Avoid washing frayed or torn articles and
treat stains such as paint, ink, rust, and
grass before washing. Underwired bras must
NOT be machine washed.
Garments which have been in contact with
volatile petroleum products should not be
machine washed. If volatile cleaning fluids
are used, care should be taken to ensure
that the fluid is removed from the garment
before placing in the machine.
Never pull the power supply cable to remove
the plug from the socket; always take hold of
the plug itself.
Never use the washing machine if the power
supply cable, the control panel, the working
surface or the base are damaged so that the
inside of the washing machine is accessible.
Child safety
This washing machine is not intended for
use by young children or infirm persons
without supervision.
Young children should be supervised to
ensure that they do not play with the
appliance.
The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children -
danger of suffocation! Keep them out of
children’s reach
Keep all detergents in a safe place out of
children’s reach.
Make sure that children or pets do not climb
into the drum. To avoid this the machine
incorporates special feature.
To disable this device
and restore the
possibility of closing the
door, rotate the button
anti-clockwise until the
groove is vertical.
To activate this device,
rotate the button
(without pressing it)
inside the door
clockwise until the
groove is horizontal. If
necessary use a coin.
126293505.qxd 14/11/07 13:10 Página 4
5
Description of the appliance
Detergent dispenser drawer
Control panel
Door opening handle
Drain pump
Adjustable feet
5
4
3
2
1
Detergent dispenser drawer
Prewash
Wash
Fabric Softener
126293505.qxd 14/11/07 13:10 Página 5
Control panel and functions
6
Programme selector dial and
On/Off switch
The programme selector dial allows to select a
programme and/or to switch the machine on/off. It can be
turned either clockwise or anticlockwise. The light
Start/Pause light starts to flash.
Spin reduction button
Press the Spin button repeatedly to change the spin
speed, if you want your laundry to be spun at a speed
different from the one proposed by the washing machine
or to select the Night cycle and Rinse Hold. The relevant
light will light up.
Options button
By means of the Options button, you can select only one
of the following options: Prewash, Intensive, Super Quick
(see the relevant chapter «Operating sequence»).
The relevant light will light up.
Extra Rinse button
The machine performs some additional rinses.
Start/Pause button
The Start/Pause button allows to start the selected
programme; the corresponding green pilot light stops
flashing.
This button also interrupts a programme which is running,
the corresponding green pilot light starts to flash.
Delay Start button
This button makes it possible to delay the start of the
washing programme by 3, 6, or 9 hours.
Programme progress display
The different pilot lights illuminate depending on the
running programme phase.
1
3
4
5
6
8
7
Temperature selector dial
This selector dial allows you to choose the temperature
for the washing cycle.
2
126293505.qxd 14/11/07 13:10 Página 6
7
Programme table
Max load for Cottons..................................6 kg
Max load for Synthetics..............................3 kg
Max load for Delicates ..............................3 kg
Cottons
(90º-40º)
White cotton (heavy
soiled cotton items): e.g.
sheets, tablecloths,
household linen, towels.
Rinse hold
Night cycle
Prewash
Extra rinse
Super quick
Eco
Main wash at selected
temperature
3 rinses
Long spin
Cottons
(30º-Cold)
Coloured cotton lightly
soiled, shirts, blouses,
underwear.
Rinse hold
Night cycle
Prewash
Extra rinse
Super quick
Main wash at selected
temperature
3 rinses
Long spin
Synthetic
(60º-40º)
Synthetic or mixed
fabrics, underwear,
coloured garments,
nonshrink shirts, blouses.
Rinse hold
Night cycle
Prewash
Extra rinse
Super quick
Eco
Main wash at selected
temperature
3 rinses
Short spin
Synthetic
(30º-Cold)
Coloured cotton lightly
soiled, shirts, blouses,
underwear.
Rinse hold
Night cycle
Prewash
Extra rinse
Super quick
Main wash at selected
temperature
3 rinses
Short spin
Easy iron
(60º - cold)
Synthetic or mixed
fabrics to be gentle
washed and spun.
Rinse hold
Prewash
Extra rinse
Main wash at 40°
4 rinses
Short spin
Delicate
(40º - cold)
Delicate fabrics, for
example curtains.
Rinse hold
Night cycle
Prewash
Extra rinse
Super quick
Main wash at selected
temperature
3 rinses
Short spin
Programme/
Temperature
Type of laundry Options
Description of
programme
126293505.qxd 14/11/07 13:10 Página 7
8
Programme table
Max load for Wool/Handwash .............................. 2 kg
Max load for Mini 30‘.......................................... 2.5 kg
Max load for Silk ....................................................1 kg
Max load for Sport Shoes 40° ............................1 pair
Max load for Sport 40° ..........................................3 kg
Programme/
Temperature
Type of laundry Options
Description of
programme
Delicate rinses
Separate rinse cycle for
hand washed items of
delicate fabric.
Rinse hold
Night cycle
Extra rinse
3 rinses
Short spin
Drain
For emptying out the last
rinse water in
programmes with the
Rinse Hold or Night
Cycle option.
Draining of water
Spin
Separate spin for
cottons.
Drain and long spin
Delicate spin
Separate spin for
delicate fabrics.
Drain and short spin
Wool
(40º - cold)
Programme for wool
«Pure new wool,
nonshrink, machine
washable» label.
Rinse hold
Night cycle
Main wash at selected
temperature
3 rinses
Short spin
Handwash
(40º - cold)
Special programme for
hand washing fabrics
Rinse hold
Night cycle
Main wash at selected
temperature
3 rinses
Short spin
Silk 30
Silk items to be gentle
washed and spun.
Rinse hold
Night cycle
Super quick
Main wash at 30º
3 rinses
Short spin
Mini 30’
Short cycle for lightly
soiled fabrics
Super quick
Main wash at 30º
2 rinses
Short spin
Soak 30’
Short cycle to keep
clothes in water
Prewash
Prewash 30º
No rinses
Rinse
Separate rinse cycle for
hand washed items of
cotton fabric.
Rinse hold
Night cycle
Extra rinse
3 rinses
Long spin
126293505.qxd 14/11/07 13:10 Página 8
9
Washing hints
Sorting the laundry
Follow the wash code symbols on each
garment label and the manufacturers washing
instructions. Sort the laundry as follows: whites,
coloureds, synthetics, delicates, woollens.
Temperatures
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first wash;
they should therefore be washed separately
the first time.
Make sure that no metal objects are left in
the laundry (e.g. hair clips, safety pins,
pins). Button up pillowcases, close zip
fasteners, hooks and poppers. Tie any belts
or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove hooks
or tie them up in a bag or net.
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly
packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more
than one third full.
Washing a maximum load makes the most
efficient use of water and energy.
For heavily soiled laundry, reduce the load
size.
Laundry weights
The following weights are indicative:
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to
treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
special detergent then rub in the soap and
water.
90° or 95°
for normally soiled white cottons
and linen (e.g. tea cloths, towels,
tablecloths, sheets...)
50°/60°
for normally soiled, colour fast
garments (e.g. shirts, night
dresses, pyjamas....) in linen,
cotton or synthetic fibres and for
lightly soiled white cotton (e.g.
underwear).
30°-40°-Cold
for delicate items (e.g. net
curtains), mixed laundry including
synthetic fibres and woollens
bearing the label «pure new wool,
machine washable, non-shrink».
1200 gbathrobe
100 gnapkin
700 gquilt cover
500 gsheet
200 gpillow case
250 gtablecloth
200 gtowelling towel
100 gtea cloth
200 gnight dress
100 gladies’ briefs
600 gman’s work shirt
200 gman’s shirt
500 gman’s pyjamas
100 gblouse
100 gmen’s underpants
126293505.qxd 14/11/07 13:10 Página 9
10
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and
dab the stain; treat several times.
Dried grease stains: moisten with turpentine,
lay the garment on a soft surface and dab the
stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since the
cellulose structure will have already been
damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone (*), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above, then
treat stains with methylated spirits. Remove
any residual marks from white fabrics with
bleach.
Red wine: soak in water and detergent, rinse
and treat with acetic or citric acid, then rinse.
Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the
fabric first with acetone (*), then with acetic
acid; treat any residual marks on white fabrics
with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the
environment. Although biodegradable,
detergents contain substances which, in large
quantities, can upset the delicate balance of
nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine
detergents may be used in this appliance:
powder detergents for all types of fabric,
powder detergents for delicate fabrics (60°C
max) and woollens,
liquid detergents, preferably for low
temperature wash programmes (60°C max)
for all types of fabric, or special for woollens
only.
The detergent and any additives must be
placed in the appropriate compartments of the
dispenser drawer before starting the wash
programme.
If using concentrated powder or liquid
detergents, a programme without prewash
must be selected.
Pour liquid detergent into the dispenser drawer
compartment marked just before starting
the programme.
Any fabric softener or starching additives must
be poured into the compartment marked
before starting the wash programme.
Follow the product manufacturers
recommendations on quantities to use and do
not exceed the «MAX» mark in the
detergent dispenser drawer.
126293505.qxd 14/11/07 13:10 Página 10
11
Quantity of detergent to be used
The type and quantity of detergent will depend
on the type of fabric, load size, degree of
soiling and hardness of the water used.
Water hardness is classified in so-called
«degrees» of hardness. Information on
hardness of the water in your area can be
obtained from the relevant water supply
company.
Follow the product manufacturers’ instructions
on quantities to use.
Use less detergent if:
you are washing a small load,
the laundry is lightly soiled,
large amounts of foam form during washing.
Degrees of water hardness
Level
Degrees
German
°dH
French
°T.H.
Characteristic
1 0-7 0-15soft
2 8-14 16-25medium
3 15-21 26-37hard
4 > 21 > 37very hard
Before the first use
WARNING!
Ensure that the electrical and water
connections comply with the installation
instructions.
IMPORTANT!
Remove the polystyrene block and any
material from the drum.
IMPORTANT!
Pour 2 litres of water into the main wash
compartment of the detergent drawer in
order to activate the ECO valve. Then run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue
from the drum and tub. Pour 1/2 a measure of
detergent into the dispenser drawer and start
the machine.
126293505.qxd 14/11/07 13:10 Página 11
12
Operating sequence
1. Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in the
drum, one item at a
time, shaking them out
as much as possible. Close the door.
2. Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
pour it into the main wash compartment
and, if you wish to carry out a programme with
the prewash phase, pour it into the
compartment marked .
If required, pour fabric softener into the
compartment marked (the amount used must
not exceed the «MAX» mark in the drawer).
Close the drawer gently.
3. Select the required programme
The selector dial is
divided into following
sections:
Cottons,
Synthetics,
Delicates,
Special
The green Start/Pause light starts to flash.
The selector dial can be turned either
clockwise or anticlockwise.
Position «Off» to Reset programme/Switching
OFF of the machine.
At the end of the programme the selector
dial must be turned to position «Off», to
switch the machine off.
IMPORTANT!
If you turn the programme selector dial to
another programme when the machine is
working, the red Start/Pause pilot light will
flash 3 times to indicate a wrong selection. The
machine will not perform the new selected
programme.
4. Select the required temperature
Turn the temperature
selector dial to select the
washing temperature.
Maximum temperatures
are 90°C for cottons,
60°-50°C for synthetic
fabrics, 40°C for delicate
fabrics, wool and fabrics to be hand-washed.
By selecting position (Cold) the machine will
wash with cold water. To be used for extremely
delicate items, such as curtains.
5. Select the spin speed or Night Cycle or
Rinse Hold option
ZWF 12170W ZWF 14170W
Press the Spin button repeatedly to change the
spin speed, if you want your laundry to be spun
at a speed different from the one proposed by
the appliance.
126293505.qxd 14/11/07 13:10 Página 12
13
Operating sequence
The relevant light will light up.
Maximum speeds are:
Cottons: 1200, 1400 rpm depending on the
Model;
Synthetics, Wool, Handwash, Sport Shoes
40° and Sport 40°: 900 rpm
Delicates, Mini 30’ and Silk: 700 rpm;
Night Cycle : by selecting this option, the
machine will not drain the water of the last rinse,
so as not to crease the laundry. As all spinning
phases are suppressed, this washing cycle is
very quiet and it can be selected at night or in
times with a more economical power rate. On
Cotton, Synthetic, Delicates, Silk, Sport Shoes
40°, and Sport 40° programmes the rinses will
be performed with more water. When the
programme has finished the «Door» and «End»
pilot lights are alight, the Start/Pause and
«Wash» lights are off and the door is locked to
indicate that the water must be emptied out.
Rinse Hold : by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. When the
programme has finished the pilot lights «Door»
and «End» are alight, the Start/Pause and
«Wash» lights are off and the door is locked to
indicate that the water must be emptied out.
To empty out the water:
1.turn the programme selector dial to «Off»
2.select the Drain or Spin programme
3.reduce the spin speed if needed, by means of
the relevant button
4.depress Start/Pause button
5. at the end of programme, only the pilot
End light comes on.
6. Select Prewash, Eco, Super Quick option
Press the «Options»
button repeatedly, to
select only one of the
available options. The
relevant light will light
up.
Prewash: select this option if you wish your
laundry to be prewashed at 30°C before the
main wash
(not available for Wool, Handwash,
Mini 30’ and Silk). The prewash ends with a short
spin in programmes for cotton and synthetic
fabrics, and Sport 40°, whereas in the
programmes for delicate fabrics and Sport 40°
Shoes the water is only drained.
Eco: This option can be selected to choose a
program with a more economical washing cycle.
You can select this option with cottons (40º-90º)
and synthetic (40º-60º) programs. It is not
available with the option "Super Quick".
Super Quick: a very short cycle for slightly
soiled items that have been used or worn for a
short time.
This option is not available with the Wool,
Handwash programmes and Eco option.
The max. load recommended for cotton: is 3 kg
and for synthetic and delicate is 1.5 kg.
IMPORTANT!
If an option is chosen that is not allowed with the
selected programme, the red pilot light of the
Start/Pause button will flash 3 times.
The washing time will be reduced according to
the type of fabric and the selected temperature.
126293505.qxd 14/11/07 13:10 Página 13
14
Operating sequence
7. Select the Extra Rinse option
This button can be
selected with all
programmes except the
Mini 30’, Silk, Wool and
Hand wash
programmes. The
machine performs some
additional rinses.
This option is recommended for people who are
allergic to detergents, and in areas where the
water is very soft.
8. Select the Start/Pause
To start the selected programme, press the
Start/Pause button; the corresponding green pilot
light stops flashing.
The «Wash» and
«Door» lights are alight
to indicate that the
appliance starts
operating and the door
is locked.
To interrupt a programme which is running,
depress the Start/Pause button: the
corresponding green pilot light starts to flash.
To restart the programme from the point at
which it was interrupted, press the Start/Pause
button again.
If you have chosen a delayed start, the machine
will begin the countdown.
IMPORTANT!
If an incorrect option is selected, the red pilot
light of the Start/ Pause button flashes 3 times.
9. Select the Delay Start
Before you start the
programme, if you wish
to delay the start, press
the Delay Start button
repeatedly, to select the
desired delay.
The relevant light illuminates.
This button makes it possible to delay the
starting of the washing programme by 3, 6, or
9 hours.
You must select this option after you have set
the programme and before you press the
Start/Pause button.
You can cancel the delay time at any moment,
before you press the Start/Pause button.
If you have already pressed the Start/Pause
button, and you wish to cancel the delay time,
proceed as follows:
set the washing machine to PAUSE by
pressing the Start/Pause button;
press the Delay Start button once, the light
relevant to the selected delay goes off.
press the Start/Pause button again to start
the programme.
IMPORTANT!
The selected delay can be changed only
after selecting the washing programme
again.
The door will be locked throughout the delay
time. If you need to open the door, you must
first set the washing machine to PAUSE by
pressing the Start/Pause button and then
wait about 2 minutes untill the «Door» light
has gone off. After you have closed the door,
press the Start/Pause button again.
The Delay Start can not be selected with Drain
programmes.
126293505.qxd 14/11/07 13:10 Página 14
15
Programme progress display
After pressing the Start/Pause button, the
«Wash» pilot light illuminates and stays on
while the machine is working.
The «Door» pilot light indicates if the door can
be opened:
light on: the door cannot be opened.
The appliance is running.
light off: the door can be opened.
The washing programme is finished.
flashing light: the door is opening.
When the programme has finished, the «End»
pilot light illuminates and the «Wash» light
goes off.
Altering an option or a running programme
It is possible to change any option before the
programme carries it out. Before you make any
change, you must pause the washing machine
by pressing the Start/Pause button.
Changing a running programme is possible
only by resetting it. Turn the programme
selector dial to Off and then to the new
programme position. The washing water in the
tub will not be emptied out. Start the new
programme by depressing the Start/Pause
button again.
Interrupting a programme
Depress the Start/Pause button to interrupt a
programme which is running, the
corresponding light starts to flash. Depress the
button again to restart the programme.
Cancelling a programme
Turn the selector dial to Off to cancel a
programme which is running. Now you can
select a new programme.
Opening the door after the programme has
started
First set the machine to pause by pressing the
Start/Pause button.
The «Door» light flashes and after 2 minutes
and the door can be opened.
If the «Door» light does not flash, this means
that the machine is already heating, that the
water level is above the bottom edge of the
door or that the drum is turning.
In this case the door can not be opened.
If you cannot open the door but you need to
open it you have to switch the machine off by
turning the selector dial to «Off».
After about 2 minutes the door can be opened
(pay attention to the water level and
temperature!).
At the end of the programme
The machine stops automatically. The
Start/Pause and «wash» lights go off and the
«end» phase light illuminates. The door can be
opened (the Door light is off).
If the «Rinse Hold» or «Night Cycle» option
has been selected, the «end» and «door»
lights illuminate but the door remains locked to
indicate that the water must be emptied out
before opening the door.
To empty out the water please read the steps
on the Rinse Hold option paragraph.
Turn the programme selector dial to «Off» to
switch the machine off. Remove the laundry
from the drum and carefully check that the
drum is empty.
If you do not intend to carry out another wash,
close the water tap. Leave the door open to
prevent the formation of mildew and
unpleasant smells.
126293505.qxd 14/11/07 13:10 Página 15
16
IMPORTANT!
You must DISCONNECT the appliance from
the electricity supply, before you can carry out
any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a
good idea to periodically use a water softening
powder in the machine. Do this separately from
any laundry washing, and according to the
softening powder manufacturer's instructions. This
will help to prevent the formation of lime deposits.
Maintenance Wash
With the use of low temperature washes it is
possible to get a build up of residues inside the
drum.
We recommend that a maintenance wash be
performed on a regular basis.
To run a maintenance wash:
The drum should be empty of laundry.
Select the hottest cotton wash programme.
Use a normal measure of detergent, must be
a powder with biological properties.
External cleaning
Clean the exterior cabinet of the appliance with
soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser
drawer should be cleaned regularly.
To aid cleaning, the top part of the additive
compartment should be removed.
Remove the drawer by pressing the catch
downwards and by pulling it out. Flush it out
under a tap, to remove any traces of
accumulated powder.
Cleaning the drawer recess
Having removed the
drawer, use a small brush
to clean the recess,
ensuring that all washing
powder residue is
removed from the upper
and lower
part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
Cleaning the pump
The pump should be inspected if
the machine does not empty and/or spin
the machine makes an unusual noise during
draining due to objects such as safety pins,
coins etc. blocking the pump.
Proceed as follows:
Pull out the plug from the power socket.
If necessary, wait until the water has cooled
down.
Open the drainage area door.
Place a bowl to collect
the water.
Turn slowly the lid of
the filter towards left
side and allow that the
water of the washing
machine goes flowing
slowly to the bowl.
When the bowl is full, turn and close the lid of
the diaphragm.
Empty the bowl. Repeat the procedure until you
have completely emptied the washing machine.
To continue, unscrew the lid of the diaphragm
by turning it counter clockwise and pull it out.
Always keep a rag nearby to dry up spillage of
water when removing the cover.
Remove the objects such as buttons, coins and
the lint that has been accumulated in the area
of the pump impeller by rotating it.
Care and cleaning
126293505.qxd 14/11/07 13:10 Página 16
17
Screw the lid of the filter clockwise, be sure it
is completely tightened.
Close the drainage area door.
IMPORTANT!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When
replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of
lime deposit, the water inlet filter may become
clogged.
It is therefore a good idea to clean it from time
to time.
Turn off the water tap.
Unscrew the water inlet
hose. Clean the filter
using a hard bristle
brush. Tighten up the
inlet hose.
The dangers of freezing
If the machine is exposed to temperatures
below 0°C, certain precautions should be
taken.
Turn off the water tap.
Unscrew the inlet hose.
Place the end of the emergency emptying
hose and that of the inlet hose in a bowl
placed on the floor and let water drain out.
Screw the water inlet hose back on and
reposition the emergency emptying hose
after having put the cap on again.
When you intend to start the machine up
again, make sure that the room temperature
is above 0°C.
IMPORTANT!
Every time you drain the water through the
emergency emptying hose you must pour 2
litres of water into the main wash compartment
of the detergent drawer and then run the drain
programme. This will activate the ECO VALVE
device.
Emergency emptying out
If the water is not discharged, proceed as
follows to empty out the machine:
pull out the plug from the power socket;
close the water tap;
if necessary, wait until the water has cooled
down;
open the pump door;
place a bowl on the floor and place the end
of the emergency emptying hose into the
bowl. Remove its cap. The water should
drain by gravity into the bowl. When the bowl
is full, put the cap back on the hose. Empty
the bowl. Repeat the procedure until water
stops flowing out;
clean the pump if necessary as previously
described;
replace the emergency emptying hose in its
seat after having plugged it;
refit the filter and close the door.
126293505.qxd 14/11/07 13:10 Página 17
18
Malfunction Possible Cause / Solution
The washing machine does not start:
The door has not been closed. (Red Start/Pause
pilot light flashes)
Close the door firmly.
The plug is not properly inserted in the power socket.
Insert the plug into the power socket.
There is no power at the socket.
Please check your domestic electrical installation.
The main fuse has blown.
Replace the fuse.
The selector dial is not correctly positioned and the
Start/Pause button has not been depressed.
Please turn the selector dial and press the
Start/Pause button again.
The delay start has been selected.
If the laundry is to be washed immediately, cancel
the delay start
The machine does not fill:
The water tap is closed. (Red Start/Pause pilot light
flashes)
Open the water tap.
The inlet hose is squashed or kinked.
(Red Start/Pause pilot light flashes)
Check the inlet hose connection.
The filter in the inlet hose is blocked.
(Red Start/Pause pilot light flashes)
Clean the water inlet hose filter.
The door is not properly closed.
(Red Start/Pause pilot light flashes)
Close the door firmly.
Something not working
IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
checks listed below.
During machine operation it is possible that the red Start/Pause pilot light flashes to indicate that
the machine is not working.
Once the problem has been eliminated, press the Start/Pause button to restart the programme. If
after all checks, the problem persists, contact your local Service Centre.
126293505.qxd 14/11/07 13:10 Página 18
19
Malfunction Possible Cause / Solution
The machine fills then empties
immediately:
The end of the drain hose is too low.
Refer to relevant paragraph in «water drainage»
section.
The machine does not empty and/or
does not spin:
The drain hose is squashed or kinked.
(Red Start/ Pause pilot light flashes)
Check the drain hose connection.
The drain pump is clogged.
(Red Start/Pause pilot light flashes)
Clean the drain pump.
The option or has been selected.
Select the Drain or Spin programmes
The laundry is not evenly distributed in the drum.
Redistribute the laundry.
There is water on the floor:
Too much detergent or unsuitable detergent (creates
too much foam) has been used.
Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.
Check the water inlet hose connection.
The inlet hose is damaged.
Change it with a new one.
The cap on the emergency emptying hose has not
been replaced after cleaning the pump.
Put the cap back on the emergency emptying
hose and place the latter back in its seat.
Unsatisfactory washing results:
Too little detergent or unsuitable detergent has been
used.
Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to
washing.
Use commercial products to treat the stubborn
stains.
The correct temperature was not selected.
Check if you have selected the correct
temperature.
Excessive laundry load.
Reduce the amount of laundry.
126293505.qxd 14/11/07 13:10 Página 19
20
The machine vibrates or is noisy:
The transit bolts and packing have not been
removed.
Check the correct installation of the appliance.
The support feet have not been adjusted.
Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
Redistribute the laundry.
Maybe there is too little laundry in the drum.
Load more laundry.
Malfunction Possible Cause / Solution
The door will not open:
The programme is still running.
Wait until the end of washing cycle.
The door lock has not been released.
Wait about 2 minute.
There is water in the drum.
Select drain or spin programme to empty out the
water.
Spinning starts late or the machine
does not spin:
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can
resume. If, after 10 minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin. In this case, redistribute the load manually and
select the spin programme.
Redistribute the laundry.
The machine makes an unusual noise
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a softer
start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of
the machine.
No water is visible in the drum
Machines based on modern technology operate very
economically using very little water without affecting
performance.
If you are unable to identify or solve the
problem, contact our service centre.
Before telephoning, make a note of the model,
serial number and purchase date of your
machine: the Service Centre will require this
information.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
M
o
d
.
.
.
.
.
.
.
.
.
.
P
r
o
d
.
N
o
.
.
..
.
.
.
.
.
S
e
r
.
N
o
.
.
.
.
.
.
.
.
.
.
126293505.qxd 14/11/07 13:10 Página 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Faure FWG3125 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

dans d''autres langues