LG HBS-850 Le manuel du propriétaire

Catégorie
Casques mobiles
Taper
Le manuel du propriétaire
English
Français
Rev 1.0 CA
All rights reserved. LG Electronics Inc., 2015
Note: Please read all information carefully prior to using the HBS-850 in order to prevent product
damage and to enjoy the best performance.
Any modications or changes to this manual due to typographical errors or inaccuracies of stated
information shall only be made by LG Electronics Inc.
HBS-850 User Manual
Bluetooth
®
Stereo Headset
2
ENG
ENG
Introduction 3
- Included in the Package 3
Description of Parts 4
- Headset 4
- Stabilizer Tip Replacement 5
How to Use 6
- Power On/Power Off 6
- Charging 6
- Low Battery 6
- Battery Status Alert 6
- Retractable Earbuds 6
- Pairing 7
- Advanced Multipoint 7
- Auto Reconnect 8
- Calling 9
Answering a Call 9
Transferring a Call 9
• Voice Dialing 9
• Last Number Redial 9
• Ending a Call 9
• Call Waiting 9
• Rejecting a Call 9
• Microphone Mute 9
- Volume Control 10
- Vibration Control 10
- Audio Streaming 10
- Equalizer 10
- aptX
®
11
- Tone & Talk
TM
11
Summary of Button Functions 13
LED Indicator 14
Troubleshooting 15
Specications 16
Precautions 17
Declaration of Conrmation 18
Additional Information 20
Limited Warranty 23
Important Safety Information 24
Table of Contents
3
ENG
ENG
Introduction
The LG TONE Active
TM
(HBS-850) is a lightweight wireless headset that uses Bluetooth technology.
This product can be used as an audio accessory for devices supporting either the A2DP or hands-free Bluetooth
profile.
User Manual
Included in the Package
Extra Ear Gels
(1 Set - Small)
Extra Stabilizer Tips
(1 Set - Small)
*USB Charging
Cable
HBS-850
(Medium Ear Gels
and Stabilizer Tips
installed)
*Actual product design may differ from images shown in this manual.
4
ENG
ENG
Description of Parts
Headset
Charging Port
LED Indicator
Microphone
Power
Button
MFB
(Multi-Function
Button)
Volume Down
Button/
Next Song
Volume Up
Button/
Previous
Song
Stabilizer Tips
Earbud (R) Earbud (L)
5
ENG
ENG
Description of Parts
Stabilizer Tip Replacement
- An extra set of Stabilizer Tips is included. Depending on your neck size, you may want to change the size of the
Stabilizer Tips for comfort and fit.
1
2
3
1
3
2
4
Stabilizer Tip Removal
Stabilizer Tip Installation
6
ENG
ENG
How to Use
Power On/Power Off
- Power On: Press and hold the PWR button for 2 seconds.
- Power Off: Press and hold the PWR button for 3 seconds.
Charging
- When the charger is connected (with the power on or off)
the headset will power off.
- While charging, the LED indicator will show a solid red
light. When charged 80% or more, the indicator will show
a violet light.
- When the device is fully charged, the LED indicator will
show a solid blue light.
Low Battery
- A low battery alert will play once every 2 minutes.
- If the battery is not charged, the headset will power off.
Battery Status Alert
- Press and hold the Volume Down button for 3 seconds to
check the battery status of the headset.
Battery
Status
High Medium Low
Voice
Prompt
Battery High
Battery
Medium
Battery Low
LED
Indicator
Blinking
Blue
Blinking
Violet
Blinking
Red
NOTE: When paired, some mobile devices may display
the headset's battery level at the top of the screen.
Retractable Earbuds
- Pull the earbuds to extend them to the desired length.
- To retract the earbuds, pull the cords out slightly, and they
will automatically retract into place.
- If the earbuds do not retract, pull the earbuds out
completely to retract them.
7
ENG
ENG
How to Use
Pairing
- To use the headset, you must first pair it with your mobile
device. Once the devices have been paired, the headset
will automatically reconnect.
1) Easy Pairing
a) Press and hold the PWR button for 2 seconds to
power on the headset.
b) If it is your first time pairing the device or it does not
detect a previously paired device, it will enter Pairing
mode. The LED indicator will be solid blue.
c) On the device you wish to pair with, find the Bluetooth
menu and search for or add new devices.
d) Select LG HBS850 from the list of devices.
e) If asked for a Pass/Pin Code, enter 0000 (4 zeros).
f) Once the devices are paired, you will hear “Your
headset paired.”
NOTE: The headset will automatically power off if not
paired within 3 minutes.
2) Manual Pairing (pairing with another phone or
re-pairing)
a) With the power off, press and hold the MFB and the
PWR button at the same time for 2 seconds to enter
Manual Pairing mode.
b) When the headset enters Pairing mode, the LED
indicator will show a solid blue light. Repeat Easy
Pairing steps c through f.
Advanced Multipoint
The headset can be connected to two devices at the same
time. This will give you the freedom to use call waiting
between calls on both of your connected phones.
Pairing with Two Devices
- First, pair the headset with the Bluetooth-enabled mobile
device you want to use as your secondary device (see
Pairing instructions).
- Once paired, power off the headset.
- With the power off, press and hold the MFB and the
PWR button at the same time for 2 seconds. This will
activate Manual Pairing mode.
- Pair and connect the headset with your other Bluetooth-
enabled mobile device. This will be your primary device.
8
ENG
ENG
How to Use
- Once the primary mobile device is paired and connected
with the headset, reconnect the headset to the initially
paired mobile device.
NOTE: When the headset is connected to two mobile
devices at the same time (Multipoint), the headset calling
functions will work with the primary mobile device.
NOTE: If the headset fails to connect to the primary phone
through Easy Pairing, it will enter Pairing mode.
Calling Function
- Voice Dialing and Last Number Redial features work
with the primary mobile device (or the mobile device that
made the last outgoing call).
Call Waiting
- While on a call, press and hold the MFB for 1 second to
answer an incoming call.
- To switch between two active calls, press and hold the
MFB for 1 second.
- To end both calls, briefly press the MFB.
- If both paired mobile devices are receiving an incoming call,
the headset will default to the primary device.
Auto Reconnect
- If in range of each other when the headset is powered on,
the headset and the primary mobile device will automatically
reconnect.
- The secondary mobile device will need to be manually
connected. Select LG HBS850 from the list of devices in the
Bluetooth
menu and connect.
Out of Range
- If the paired devices are separated by a range of 33
feet (10 meters) or more, the headset and paired mobile
device(s) will disconnect, and the headset will vibrate
to alert you.
NOTE: To power off device vibration, press and hold the
Volume Up button for 3 seconds.
- If the headset and paired mobile device do not
automatically reconnect when they are back within the
required range, briefly press the MFB on the headset to
manually reconnect.
- While in multi-connection and streaming, the inactive
paired device will be disconnected when out of range.
The headset will alert you once with no attempt to
reconnect.
9
ENG
ENG
How to Use
Calling
Answering a Call
- When receiving an incoming call, the headset will ring
and vibrate.
- Briey press the Volume Down button to stop the vibration.
NOTE: The headset will not vibrate if vibration has been
deactivated.
- Briey press the MFB to answer the incoming call.
Transferring a Call
- You can manually transfer the call to or from the headset
by pressing the Volume Up button for 2 seconds on the
headset (mobile device and headset must be paired).
Voice Dialing
- Press and hold the MFB for 1 second to activate Voice
Command. For best results, record the voice dialing tag
through your headset.
NOTE: If your mobile device does not support voice dialing,
this action may activate Last Number Redial.
Last Number Redial
- Press and hold the MFB for 2 seconds to activate Last
Number Redial. The headset will call the last number
dialed.
Ending a Call
- Briey press the MFB.
Call Waiting
- Answer a second call without hanging up the rst call by
pressing the MFB for 1 second. Press and hold the MFB for
1 second to return to the rst call.
- Briey press the MFB to end both calls.
Rejecting a Call
- Activate Call Reject by pressing the MFB for 2 seconds
when the mobile device rings.
NOTE: These functions may not be available on all mobile
devices. For further information about using these features,
please consult your mobile device’s user manual.
Microphone Mute
- Press and hold the Volume Up and Volume Down
buttons at the same time for 1 second to mute/unmute the
microphone during conversation.
10
ENG
ENG
How to Use
Volume Control
- Press the Volume buttons to adjust the speaker volume.
Caution: Listening to music for long periods of time at
high volume levels may cause hearing damage or loss. To
prevent this, the headset will emit a warning beep when
you are using the upper six volume levels.
Vibration Control
- To activate or deactivate device vibration, press and
hold the Volume Up button for 3 seconds. You will
hear “Vibrate on” or “Vibrate off” when it is activated or
deactivated.
- When vibration is deactivated, the headset will not
vibrate when receiving an incoming call or when it is out
of range of a paired mobile device.
- Vibration will be automatically reactivated when the
device is powered on.
Audio Streaming
Play
- Briefly press the MFB.
Pause
- While playing music, briefly press the MFB.
Next song
- Press and hold the Volume Down button for 1 second.
Previous song
- Press and hold the Volume Up button for 1 second.
Equalizer
- While playing music, press and hold the MFB for
2 seconds to switch between Bass Boost (default),
Normal, and Treble Boost.
NOTE: The size of the ear gel can affect the amount of
bass you hear.
11
ENG
ENG
How to Use
aptX
- The headset features aptX technology that ensures
audio content transmitted via Bluetooth is seamless and
crystal clear.
- aptX is automatically enabled as long as the source
device supports it.
Tone & Talk
The HBS-850 Bluetooth headset supports SMS reading on
Android
TM
-based devices.
To download the app, search for Tone & Talk in Google
Play
TM
* or scan the QR code. Follow the installation
instructions.
*Google Play is a trademark of Google, Inc.
Function Action
Current time
alert
Press and hold the Volume Down button for
1 second.
Read latest
SMS or MMS
Press and hold the Volume Up button for
1 second.
Designated
contact
1. Select Designated contact in the headset
call settings of the app.
2. To call the Designated contact, press and
hold the Volume Up and Volume Down
buttons at the same time for 1 second.
Favorite
contacts
1. Select Favorite contacts in the headset call
settings of the app.
2. Press and hold the Volume Up and Volume
Down buttons at the same time for 1 second
on your headset.
3. Use the Volume buttons to choose the
contact.
4. To call the Favorite contact, press and hold
the Volume Up and Volume Down buttons at
the same time for 1 second.
12
ENG
ENG
Function Action
Call logs
1. Select Call logs in the headset call settings
of the app.
2. Press and hold the Volume Up and Volume
Down buttons at the same time for 1 second
on your headset.
3. Use the Volume buttons to choose the
contact.
4. To call the contact, press and hold the
Volume Up and Volume Down buttons at the
same time for 1 second.
How to Use
13
ENG
ENG
Function
Headset
Status
Action
Power on Power off
Press and hold the PWR button for
2 seconds.
Power off Power on
Press and hold the PWR button for
3 seconds.
Volume up
Talking/
Music on
Briey press the Volume Up button.
Volume down
Talking/
Music on
Briey press the Volume Down button.
Transferring
a call
Talking
Press and hold the Volume Up button for
2 seconds.
Answering
a call
Ringing Briey press the MFB.
Stop incoming
call vibration
Ringing Briey press the Volume Down button.
Vibration
on/off
Idle
Press and hold the Volume Up button
for 3 seconds.
Ending a call Talking Briey press the MFB.
Call waiting Talking Press and hold the MFB for 1 second.
Last number
redial
Idle Press and hold the MFB for 2 seconds.
Function
Headset
Status
Action
Voice dialing
(must be
supported on
mobile device)
Idle Press and hold the MFB for 1 second.
Call reject Ringing Press and hold the MFB for 2 seconds.
Microphone
mute on/off
Talking
Press and hold the Volume Up and
Volume Down buttons at the same time
for 1 second.
Pairing mode
(Manual)
Power off
Press and hold the MFB and the PWR
button at the same time for 2 seconds.
Battery status
check
Idle
Press and hold the Volume Down button
for 3 seconds.
Play Power on Briey press the MFB.
Pause Music on Briey press the MFB.
Next song Music on
Press and hold the Volume Down button
for 1 second.
Previous song Music on
Press and hold the Volume Up button
for 1 second.
Equalizer
settings
Music on Press and hold the MFB for 2 seconds.
Summary of Button Functions
14
ENG
ENG
LED Indicator
Function Headset Status Indicator
Operating
Pairing mode Solid blue LED light.
Headset/hands-free prole connected
The blue LED light ickers 1 time.
Call connected The blue LED light ickers 1 time.
Charging
Charging Solid red LED light, which changes to violet when charged 80% or more.
Charging complete
Solid blue LED light.
15
ENG
ENG
Troubleshooting
Problem Possible Causes Possible Solution
Does not power on
Check whether the battery of the headset is
fully charged.
Charge the battery.
Unable to communicate with
the LG Bluetooth
Headset
HBS-850
Check whether the mobile device you are trying
to pair supports the headset or hands-free
Bluetooth proles.
Determine whether your mobile device supports
the headset or hands-free Bluetooth proles.
Check whether the battery of the headset
is low.
Charge the battery.
Unable to pair the headset with
the Bluetooth device
Check to make sure the headset is on.
Press and hold the PWR button for 2 seconds to
power on the headset.
Check to make sure the headset is placed in
Pairing mode.
With the power off, press and hold the MFB and
the PWR button at the same time for 2 seconds
to place the headset in Manual Pairing mode.
Low sound (speaker) Check the speaker volume. lncrease the volume level.
16
ENG
ENG
Item Description
Bluetooth version
4.1 (Headset/Hands-Free/A2DP proles)
Battery
Battery 3.7 V/180 mAh Li-Polymer
Talk time Up to 13 hours
Music play time Up to 9.5 hours
Standby time Up to 430 hours
Charging time Less than 2 hours
Rated input power DC 4.75 V ~ 5.3 V, 400 mA
Operation temperature 14°F ~ 140°F (-10°C ~ 60°C)
Dimensions/weight 141 mm (W) x 140 mm (L) x 16.1 mm (H) / 51 g
Specications
17
ENG
ENG
Do not drop the device.
Do not modify, repair, or disassemble.
Do not expose directly to water, alcohol, benzene, etc., for cleaning.
Do not expose directly to ammables.
Do not place or keep the device near ammables.
Keep the device away from excessive humidity and dust.
Do not place heavy objects on the device.
Only charge the headset with an original LG charger, otherwise it may be damaged.
Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
• Risk of damage or explosion if incorrect battery is used.
• Dispose of used batteries according to the instructions.
This product contains small parts, including ear gels, earbuds, stabilizer tips, and cables. Keep out of reach of children.
If you have an implanted medical device, consult with a doctor prior to using this product.
To prevent potential discoloration, please make sure the product is not exposed to direct sunlight for an excessive period
of time.
Always unplug the charger from the wall socket after the product is fully charged to save unnecessary power
consumption of the charger.
Li-ion Battery is a hazardous component which can cause injury.
Battery replacement by non-qualied professional can cause damage to your device.
Do not replace the battery by yourself. The battery can be damaged, which can cause overheat and injury. The battery
must be replaced by the authorized service provider. The battery should be recycled or disposed separately from
household waste.
Precautions
18
ENG
ENG
FCC NOTICE TO USERS:
This device complies with part 15 of FCC rules and IC
license-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation of the device.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device
is permitted. Any change to the antenna or the device
could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the
device.
DECLARATION OF CONFORMITY :
Hereby, LG Electronics declares that this HBS-850 is in
compliance with the essential requirements and other
relevant provisions of Directive1999/5/EC. A copy of the
Declaration of Conformity can be found at http://www.
lg.com/global/declaration
Declaration of Conrmation
19
ENG
ENG
Declaration of Conrmation
IC NOTICE TO USER:
This radio transmitter has been approved by Industry
Canada to operate with the antenna types listed below
with the maximum permissible gain and required antenna
impedance for each antenna type indicated. Antenna
types not included in this list, having a gain greater than
the maximum gain indicated for that type, are strictly
prohibited for use with this device. Under Industry Canada
regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p) is not more
than that necessary for successful communication. This
device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1)this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Bluetooth
®
is a registered trademark of Bluetooth SIG,
Inc. worldwide.
FCC ID: BEJHBS850
IC : 2703C-HBS850
0168
20
ENG
ENG
Additional Information
1. Radio frequency exposure
This Bluetooth Stereo Headset HBS-850 is a radio
transmitter and receiver. When in operation it
communicates with a Bluetooth-equipped mobile device
by receiving and transmitting radio frequency (RF)
electromagnetic fields (microwaves) in the frequency
range 2.4 to 2.4835 GHz. Your Bluetooth headset is
designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and
international health agencies when used with any
compatible LG Electronics mobile device.
2. Potentially explosive atmosphere
Power off your electronic device when in any area with
a potentially explosive atmosphere. Although this is
uncommon, your electronic device could generate sparks.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Areas with a
potentially explosive atmosphere are often, but not always,
clearly marked.
3. Emergency calls
IMPORTANT!
This Bluetooth headset and the electronic device
connected to the headset operate using radio signals,
mobile and landline networks as well as user-programmed
functions, which cannot guarantee connection under all
conditions. Therefore you should never rely solely upon
any electronic device for essential communications (e.g.
medical emergencies). Remember, in order to make
or receive calls, the headset and the electronic device
connected to the headset must be powered on and in
a service area with adequate mobile signal strength.
Emergency calls may not be possible on all mobile phone
networks or when certain network services and/or phone
features are in use. Check with your local service provider.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

LG HBS-850 Le manuel du propriétaire

Catégorie
Casques mobiles
Taper
Le manuel du propriétaire

dans d''autres langues