Ingenico Self-2000 Mode d'emploi

Marque: Ingenico

Modèle: Self-2000

Taper: Mode d'emploi

Self/2000

Quick start

www.ingenico.com

13-17 rue Pagès, 92150 Suresnes – France

Banks and Acquirers International Holding SAS / 814 767 216 RCS Nanterre

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

Contents

1. Introduction 3

2. Recommendation 6

2.1 Safety 6

2.2 Security of your terminal 8

2.3 Integration 8

2.4 Approval and markings 9

2.5 IC statements 10

2.6 FCC statement 10

3. Maintenance 11

3.1 Transport and storage 13

3.2 Environment (WEE, Bateries and Packaging 13

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

1. Introduction

Thank you for choosing a payment terminal Ingenico.

We recommend you to read carefully this guide : It gives you the necessary

information about safety precautions, unpacking, installation, and

maintenance of your terminal.

Danke, dass Sie sich für einen Zahlungsterminal von Ingenico

entschieden haben.

Wir empfehlen Ihnen, diese Installationsanleitung sorgfältig

durchzulesen. Sie enthält die erforderlichen Informationen zu den

Sicherheitsvorkehrungen, dem Auspackung, der Installation und der

Wartung Ihres Terminals.

Merci d’avoir choisi un terminal de paiement Ingenico.

Nous vous recommandons de lire attentivement ce guide d’installation : Il vous

donne les informations nécessaires sur les précautions de sécurité, le

déballage, l’installation et l’entretien de votre terminal.

GEWÄHRLEISTUNG / SICHERHEIT

Um die Gewährleistung für dieses Produkt in Anspruch

nehmen zu

können und die Sicherheit zu gewährleisten,

bitten

wir Sie, nur die in der mit dem Produkt im

Karton gelieferten und enthaltenen Zubehörteile zu

verwenden und die Wartung nur einer dazu befugten

Person zu überlasseneiner dazu befugten Person

anzuvertrauen.

GARANTIE / SECURITE

Pour bénéficier de la garantie liée au produit, et afin de

respecter

la sécurité, nous vous demandons de

n’utiliser que des accessoires livrés dans la boîte avec

produit, en confiant les opérations de maintenance

seulement à une personne autorisée.

WARRANTY / SAFETY

To benefit from the guarantee related product, and to

respect the security, we ask you to use only accessories

delivered in box with the product, entrusting

maintenance operations only to an authorized person.

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

The Self/2000 can be powered by different sources please respect

these recommendations :

The power sources should comply with Standards IEC60950-1:2013

Edition 2.2 and EN60950-1:2006 + A11/2009 + A1/2010 + A12/2011

+ A2:2013. or IEC 62368-1 : 2014. Moreover, they should be safety

Extra-Low Voltage circuits and Power Limited Sources according

to §2.2 and §2.5 (EN 60950-1) or classified ES1/PS2 according

EN62368-1 §6.2.2 and §5.2.1.

The power source should be powered thanks to socket-outlets

installed near the equipment and easily accessible.

Self/2000 power ratings : 9 – 16 V max 2A

Der Self/2000 kann an verschiedene Stromquellen angeschlossen

werden; beachten Sie bitte diese Empfehlungen.

Die Stromquellen sollten den Normen IEC60950-1:2013 Auflage

2.2 und EN60950-1:2006 + A11/2009 + A12/2011 + A2:2013 oder

IEC 62368-1 : 2014 entsprechen. Zudem solite es sich dabei um

Schutzkleinspannungen und begrenzte Stromquelien gemäß den

Bestimmugen 2.2 und 2.5 (EN60950-1) oder um ES1/PS2 gemäß

EN62368-1 §6.2.2 und §5.2.1 handeln.

Die Stromquelle sollte über Steckdosen fließen, die in der Nähe des

Geräts installiert und leicht zugänglich sind.

Nennleistungen des Self/2000: 9 – 16 V max 2A

Les Self/2000 peuvent être alimentés par différentes alimentations

électriques. Merci de respecter les recommandations suivantes :

Les alimentations électriques doivent être conformes aux normes

IEC60950-1:2013 Edition 2.2 et EN60950-1:2006 + A11/ 2009 +

A12/2011 + A2:2013. De plus, elles doivent être des circuits Très Basse

Tension de Sécurité et des sources à Puissance Limitée conformément

aux chapitres §2.2 and §2.5 (EN 60950-1) ou classées ES1/PS2 selon

EN62368-1 §6.2.2 et §5.2.1.

Les alimentations électriques doivent être connectées via des

socles de prises de courant installés à proximité du matériel et

aisément accessibles.

Caractéristiques électriques d’alimentation des Self/2000: 9 –

16 V max 2A

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

The screw from the kiosk near the ground marks must be used to connect

the product to the earthing.

Die 2 Bolzen die durch die Bohrungen (GND Markierung) des Terminals´s

führen müssen entsprechend geerdet werden.

La vis du kiosk à côté du logo de mise à la terre doit être utilisée pour relier

les produits à la terre.

Nota : Failure to comply with these instructions will

void the manufacturer’s responsibility.

Hinweis : Bei Nichteinhaltung dieser Anweisungen wird

die Haftung des Herstellers aufgehoben.

Nota : le non respect de ces instructions annule la

responsabilité du fabricant.

This symbol indicates an important Warning.

Dieses Symbol stellt ein wichtiges Warnzeichen dar.

Ce symbole indique un avertissement important.

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

2. Recommendation

2.1 Safety

Power on / Power down

To power on or power down the Self/2000 connect or disconnect the cable

connected to power plug 9-16V.

Starten / stoppen

Für starten oder stoppen Self/2000 anschließen oder abziehen Kabel an 9-

16V stromanschluss angeschlossen.

Mise en marche / Arrêt

Pour allumer ou éteindre Self/2000 connectez ou débranchez le câble

connecté à la prise d’alimentation 9-16V.

Lithium battery

The Self/2000 is fitted with a lithium battery which is not accessible to

the user. Only a qualified technician may be authorized to open the unit and

change this component.

For switzerland annex 2.15 of SR 814.81 applies for batteries.

Lithium Batterie

Die Self/2000 sind mit einer Lithium-Batterie ausgestattet, die nicht für den

Benutzer zugänglich.

Nur ein qualifizierter Techniker können ermächtigt werden, das Gerät zu

öffnen und ändern Sie die Komponente werden

Für die Schweiz 2,15 2,15 Anhang von SR 814.81 gilt für Batterien

Pile au lithium

Les Self/2000 sont munis d’une pile au lithium qui n’est pas accessible

à l’utilisateur. Seul un technicien qualifié peut être autorisé à ouvrir l’appareil

et à changer ce composant.

Pour la Suisse l’annexe 2.15 de la SR 814.81 s’applique pour les batteries.

SAM, µSD connectors

They are operator accessible parts.

This is an Electrostatic (ESD) sensitive area and ESD precautions

must be taken when fitting it As a minimum, the operator should be

“Electrostatically Discharged” via his/her hand to a suitable safe metallic

earthing point prior to opening this area.

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

SAM-, µSD- Steckverbinder

Ersatzteile sind für den Bediener erhältlich.

Dies ist ein elektrostatisch (ESD) empfindlicher Bereich und

ESDVorsichtsmassnahmen müssen bei der Anbringung ergriffen werden.

Zumindest sollte der Bediener vor dem Öffnen dieses Bereichs an einem

geeigneten, sicheren metallenen Erdungspunkt über die Hand

„elektrostatisch entladen”werden.

Connecteurs SAM, µSD

Ces connecteurs sont accessibles par l’opérateur.

Il s’agit de zones sensibles aux décharges électrostatiques (DES)

et des précautions DES doivent être prises lors du montage. Avant

toute intervention l’opérateur doit au minimum se décharger

électrostatiquement en posant la main sur un point métallique de mise

à la terre approprié et sécurisé.

Connections to external equipment and circuits

All external circuits and equipment connected to Self/2000 should be

Safety Extra-Low Voltage circuits according to clause 2.2 of Standards

IEC60950-1:2013 Edition 2.2 and EN60950-1:2006 +A11/2009 + A1/2010

+ A12/2011 + A2:2013.

Verbindungen zu externen Geräten und Schaltungen

Alle externen Schaltungen und Geräten, die an Self/2000 sollte Safety

Extra-Low Voltage-Schaltungen werden nach Ziffer 2.2 des Standards

IEC60950-1: 2013 Ausgabe 2.2 und EN60950-1:2006 + A11/2009 +

A12/2011 + A2:2013.

Connexion aux équipements et circuits externes

Tous les circuits et équipements externes connectés aux Self/2000 doivent

être des circuits Très Basse Tension de Sécurité conformément au

chapitre 2.2 dans normes IEC60950-1 : 2013 Edition 2.2 et EN60950-1

: 2006 + A11 / 2009 + A12/2011 + A2:2013.

Operating conditions / Betriebsbedingungen / En fonctionnement :

Temperature/ Temperatur/ Température -20°C to +65°C

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

2.2 Security of your terminal

Your device fulfils current applicable PCI PTS security requirements.

Upon receipt of your terminal you should check for signs of tampering

of the equipment. It is strongly advised that these checks are performed

regularly after receipt. You should check, for example: that the keypad is

firmly in place; that there is no evidence of unusual wires that have been

connected to any ports on your terminal or associated equipment, the chip

card reader or any other part of your terminal.

Such checks would provide warning of any unauthorized modifications

to your terminal, and other suspicious behavior of individuals that have

access to your terminal. Your terminal detects any “tampered state”. In this

state the terminal will repeatedly flash the message” Irruption!” and further

use of the terminal will not be possible. If you observe the “Irruption!”

message, you should contact the terminal helpdesk immediately.

You are strongly advised to ensure that privileged access to your

terminal is only granted to staff that have been independently verified

as being trustworthy.

The terminal must never be put in or left at a location where it could be

stolen or replaced by another device.

2.3 Integration

See Integration guide.

CAUTION

Positioning of the terminal on check stand must be

in such a way to make cardholder PIN (Personal

Identification Number) spying infeasible.

NEVER ask the customer to divulge their PIN Code.

Customers should be advised to ensure that they are

not being overlooked when entering their PIN Code.

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

2.4 Approvals and markings

Mandatory conformity marking for products sold within

the European Economic Area (EEA). It states that the product

is assessed before being placed on the market and meets

EU safety, health and environmental protection

requirements.

Indicates that the product has been certified to applicable

standards including standards written or administered by

the American National Standards Institute (ANSI),

Underwriters Laboratories (UL), CSA Group (CSA), NSF

International (NSF), and other North American and global

Organizations.

Indicates that when the end-user wishes to discard this

product, it must be sent to separate collection facilities for

recovery and recycling.

Indicates that the product operates with a continuous

voltage. This symbol is followed by the ratings (voltage

and current for instance).

SAM1

SAM2

µSD

audio output

IP 65 Indicates the internal protection. Based on IEC60529

1er digit .6 : Effective against dust tight

2nd digit .5 : Protection against water jets

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

2.5 IC statements

Under Industry Canada regulations, this radio transmitter may only operate

using an antenna of a type and maximum (or lesser) gain approved for the

transmitter by Industry Canada. To reduce potential radio interference to

other users, the antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (e.i.r.p.) is not more than that

necessary for successful communication.

Conformément à la réglementation d’Industrie Canada, le présent émetteur

radio peut fonctionner avec une antenne d’un type et d’un gain

maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada.

Dans le but de réduire les risques de brouillage radioélectrique à

l’intention des autres utilisateurs, il faut choisir le type d’antenne et

son gain de sorte que la puissance isotrope rayonnée équivalente

(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une

communication satisfaisante.

“This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions : (1) this

device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation

of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada

applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas

produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible

d’en compromettre le fonctionnement.

2.6 FCC statement

FCC standard compliance marking certifies that the product stipulated

below : Self/2000

conforms to the following harmonized standards :

/ part 15 subpart B of the FCC rules

This class (B) digital apparatus complies with Canadian ICES-003.

Information to users :

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

NOTE : This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception which can

be determined by turning the equipment off and on, the user is encouraged

to try to correct interference by one or more of the following measures :

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for

help.

This device complies with FCC and IC radiation exposure limits set

forth for general population. This device must be installed to provide

a separation distance of at least 20cm from all persons and must not

be co-located or operating in conjunction with any other antenna or

transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

3. Maintenance

ATTENTION

Before making any operations of maintenance in the terminal, make sure

that power supply is disconnected.

ACHTUNG

Stellen Sie vor der Durchführung von Wartungsarbeiten am Terminal sicher,

dass die Stromzufuhr abgeschaltet ist.

ATTENTION

Avant toute opération de maintenance du terminal, s’assurer que

l’alimentation électrique est déconnectée.

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

Cleaning of the terminal

First of all, unplug all the wires from the terminal.

Reinigung des Terminals

Zunächst entfernen Sie alle Kabel vom Terminal.

Nettoyage du terminal

Avant cette opération, débrancher tous les câbles du terminal.

Good rules for proper cleaning of the terminal are :

Use a soft cloth that is very slightly soaked with soapy water

to clean the outside of the terminal.

Do not clean the electrical connections.

Do not use in any case, solvents, detergents or abrasive

products : Those materials might damage the plastic or

electrical contacts.

Avoid exposing the terminal to the direct rays of the sun.

Regeln zur Reinigung des Terminals :

Verwenden Sie zur Reinigung des Äußeren des Terminals ein

weiches Tuch, das leicht in Seifenwasser getaucht wurde.

Die elektrischen Anschlüsse dürfen nicht gereinigt werden.

Auf keinen Fall dürfen Lösungsmittel, Waschmittel oder

Scheuermittel verwendet werden : diese könnten die

Kunststoffteile oder Kontakte beschädigen.

Der Terminal sollte keiner direkten Sonnenbestrahlung

ausgesetzt werden.

Les règles de bonne pratique pour le nettoyage du terminal sont le

suivantes :

Utiliser un chiffon doux très légèrement imbibé d’eau

savonneuse pour nettoyer l’extérieur du terminal.

Ne pas nettoyer les connexions électriques.

Ne jamais utiliser de solvants, détergents ou produits abrasifs

: ces produits peuvent endommager les contacts électriques

ou les parties plastiques.

Eviter une exposition directe du terminal aux rayons du soleil.

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

3.1 Transport and storage

Use the original packaging for any unit transported or stored.

Disconnect all cables from the terminal during the transport.

Verwenden Sie die Originalverpackung zur Aufbewahrung des

Geräts.

Entfernen Sie während des Transports alle Kabel vom Terminal.

Utiliser l’emballage d’origine pour le transport et le stockage des

produits.

Débrancher tous les câbles du terminal avant le transport.

3.2 Environment (WEEE, Bateries and

packaging)

This product is labeled in accordance with European Directives 2012/19/ EU

concerning Waste Electrical and Electronic Equipment (WEEE) and

2006/66/EC concerning Batteries and Accumulators. Those provisions

are requiring producers and manufacturers to become liable for take- back,

treatment and recycling upon end of life of equipment and batteries.

The associated symbol means that WEEE and waste batteries

must not be thrown away but collected separately and recycled.

Ingenico ensures that efficient collection and recycling schemes

are set-up for WEEE and batteries according to the local

regulation of your country. Please contact your retailers for

more detailed information about the compliance solution in

place for disposing of your old product and used batteries.

Packaging waste must also be collected separately to assure a proper

disposal and recycling.

Please note that proper recycling of the electrical and electronic equipment

and waste batteries will ensure safety of human health and environment.

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

NOTES

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

NOTES

Banks and Acquirers

International Holding SAS

Self/2000 - Quick start

900053103 R11 000 01/0323

retains full copyright ownership, rights and protection in all material

contained in this document. The recipient can receive this document on the

condition that he will keep the document confidential and will not use its

contents in any form or by any means, except as agreed beforehand,

without the prior written permission of INGENICO. Moreover, nobody

is authorized to place this document at the disposal of any third party

without the prior written permission of INGENICO. If such permission is

granted, it will be subject to the condition that the recipient ensures that

any other recipient of this document, or information contained therein, is

held responsible to INGENICO for the confidentiality of that information.

Care has been taken to ensure that the content of this document is as

accurate as possible. INGENICO however declines any responsibility

for inaccurate, incomplete or outdated information. The contents of

this document may change from time to time without prior notice, and

do not create, specify, modify or replace any new or prior contractual

obligations agreed upon in writing between INGENICO and the user.

INGENICO is not responsible for any use of this device, which would be non

consistent with the present document.

All trademarks used in this document remain the property of their rightful

owners.”

www.ingenico.com

13-17 rue Pagès, 92150 Suresnes – France

Banks and Acquirers International Holding SAS / 814 767 216 RCS Nanterre

Your contact

Ingenico Self-2000 Mode d'emploi

Marque: Ingenico

Modèle: Self-2000

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Ingenico Self-2000 User guide
Deutsch: Ingenico Self-2000 Benutzerhandbuch

Ingenico Self-2000 Mode d'emploi

Ingenico Self-2000 Mode d'emploi

dans d''autres langues

Documents connexes