Yamaha BD-S2900 Manuel utilisateur

Marque: Yamaha

Modèle: BD-S2900

Catégorie: Lecteurs DVD

Taper: Manuel utilisateur

Ce manuel convient également à

BD-S2900 - Blu-Ray Disc Player

BLU-RAY DISC PLAYER

LECTEUR BLU-RAY DISC

BD-S2900

OWNER’S MANUAL

MODE D’EMPLOI

i En

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

Rea

ese operat

nstruct

ons care

ore us

ng t

e un

t. Fo

ow t

e sa

ety

nstruct

ons on t

e un

t an

e app

e sa

ety

nstruct

ons

listed below. Keep these operating instructions handy for future reference.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with

the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury

from tip-over.

13 Unplug this apparatus during lightning storms or when unused for

long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

PRODUCT DAMAGE,

• DO NOT EXPOSE THIS APPARATUS TO RAIN,

MOISTURE, DRIPPING OR SPLASHING AND THAT

NO OBJECTS FILLED WITH LIQUIDS, SUCH AS

VASES, SHALL BE PLACED ON THE APPARATUS.

• USE ONLY THE RECOMMENDED ACCESSORIES.

• DO NOT REMOVE THE COVER (OR BACK); THERE

ARE NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-

IN CABINET OR IN ANOTHER CONFINED SPACE.

ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK

OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO

OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used

batteries according to the manufacturer’s instructions.

The socket outlet shall be installed near the equipment and easily accessible.

The mains plug of the power supply cord shall remain readily operable.

To completely disconnect this apparatus from the AC Mains, disconnect the

power supply cord plug from AC receptacle.

ii En

We Want You Listening For A Lifetime

Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by

playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion - and, most

importantly, without affecting your sensitive hearing.

Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic Industries Association’s

Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

LASER SAFETY

This unit employs a laser. Due to possible eye injury, only a qualified

service person should remove the cover or attempt to service this

device.

DANGER

This unit emits visible laser radiation when open. Avoid direct eye

exposure to beam.

When this unit is plugged into a wall outlet, do not place your eyes

close to the opening of the disc tray and other openings or look inside.

FCC INFORMATION (for US customers)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions

contained in this manual, meets FCC requirements. Modifications

not expressly approved by Yamaha may void your authority, granted

by the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or

another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reasonable

level of assurance that your use of this product in a residential

environment will not result in harmful interference with other

electronic devices.

This equipment generates/uses radio frequencies and, if not installed

and used according to the instructions found in the users manual,

may cause interference harmful to the operation of other electronic

devices.

Compliance with FCC regulations does not guarantee that

interference will not occur in all installations. If this product is found

to be the source of interference, which can be determined by turning

the unit “OFF” and “ON”, please try to eliminate the problem by

using one of the following measures:

Relocate either this product or the device that is being affected by the

interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna.

If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to

coaxial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please contact

Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave., Buena

Park, CA 90620.

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

LASER Specification:

Class 1 LASER Product

Wave length: 782 nm (CDs)/662 nm (DVDs)/405 nm (BDs)

Laser power: No hazardous radiation is emitted with the safety

protection

DANGER–VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN. AVOID

DIRECT EXPOSURE TO BEAM.

iii En

1 To assure the finest performance, please read this manual carefully.

Keep it in a safe place for future reference.

2 Install this unit in a well ventilated, cool, dry, clean place — away

from direct sunlight, heat sources, vibration, dust, moisture, or cold.

In a cabinet, allow about 2.5 cm (1 inch) of free space all around

this unit for adequate ventilation.

3 Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to

hot, nor locate this unit in an environment with high humidity (i.e., a

room with a humidifier) to prevent condensation inside this unit,

which may cause an electrical shock, fire, damage to this unit, and/

or personal injury.

5 Avoid installing this unit in a location where foreign objects may

fall onto this unit or where this unit may be exposed to liquid

dripping or splashing. On the top of this unit, do not place:

– Other components, as they may cause damage and/or

discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may cause fire,

damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall, spilling the

liquid and causing an electrical shock to the user and/or

damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in

order not to obstruct heat radiation. If the temperature inside this

unit rises, it may cause fire, damage to this unit, and/or personal

injury.

7 Do not plug in this unit to a wall outlet until all connections are

complete.

8 Do not operate this unit upside-down. It may overheat, possibly

causing damage.

9 Do not use excessive force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall outlet, grasp the

plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might damage the

finish. Use a clean, dry cloth.

12 Use only the voltage specified on this unit. Using this unit with a

higher voltage than specified is dangerous and may cause fire,

damage to this unit, and/or personal injury. Yamaha will not be held

responsible for any damage resulting from use of this unit with a

voltage other than as specified.

13 Do not attempt to modify or fix this unit. Contact qualified Yamaha

service personnel when any service is needed. The cabinet should

never be opened for any reason.

14 When not planning to use this unit for long periods of time (i.e.,

vacation), disconnect the AC power plug from the wall outlet.

15 Be sure to read the “TROUBLESHOOTING GUIDE” section on

common operating errors before concluding that this unit is faulty.

16 Before moving this unit, press STANDBY/ON to set the unit in

standby mode, then disconnect the AC power plug from the wall

outlet.

17 Install this unit near the AC outlet and where the AC power plug

can be reached easily.

18 The batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.

The unit is not disconnected from the AC power source as long as it

is connected to the wall outlet, even if this unit itself is turned off by

STANDBY/ON. This state is called the standby mode. In this state,

this unit is designed to consume a very small quantity of power.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to wide slot and

fully insert.

This Class B digital apparatus complies with Canadian ICES-003.

Region management information

BD-Video

This unit plays BD-Video marked with labels containing the region code A.

Example:

DVD-Video

This unit plays DVD-Video marked with labels containing the region number “1” or “ALL”.

Example:

ALL

TABLE OF CONTENTS

1 En

English

Please check and identify the supplied accessories.

TABLE OF CONTENTS

GETTING STARTED

ACCESSORY INFORMATION

Using remote control

GETTING STARTED

ACCESSORY INFORMATION......................................... 1

DISC AND CARD INFORMATION................................... 2

CONNECTION.................................................................. 4

CONTROL REFERENCE GUIDE..................................... 7

EASY SETTING................................................................ 8

PLAYBACK

BASIC PLAY (PLAYING VIDEO CONTENTS)................ 9

DIFFERENT KINDS OF PLAYBACK FOR BD-VIDEO.. 11

CHAPTER PLAYBACK.................................................. 12

PLAYING STILL PICTURES .......................................... 12

PLAYING MUSIC............................................................ 14

SHOWING FUNCTIONS MENU ..................................... 14

LINKED OPERATIONS WITH THE TV .......................... 15

SETTINGS

CHANGING SETTINGS WITH THE ON-SCREEN MENU

.....................................................................................16

CHANGING THE UNIT’S SETTINGS .............................18

REFERENCE

FREQUENTLY ASKED QUESTIONS.............................22

TROUBLESHOOTING GUIDE........................................23

MESSAGES ....................................................................26

DISC AND CARD HANDLING........................................26

MAINTENANCE ..............................................................26

SPECIFICATIONS...........................................................27

GLOSSARY.....................................................................28

INDEX..............................................................................29

Audio/Video cableRemote control Batteries (AA, R6, UM-3) (× 2)

for remote control

Power cable

• For use with this unit only. Do not use

it with other equipment.

Also, do not use power cables for

other equipment with this unit.

atter

Insert so the poles (+ and –) match those in

the remote control.

• Do not use rechargeable type batteries.

• Batteries shall not be exposed to excessive heat

such as direct sunlight, fire or the like.

• Do not mix old and new batteries.

• Do not use different types at the same time.

• Do not heat or expose to flame.

• Do not take apart or short circuit.

• Do not attempt to recharge alkaline or

manganese batteries.

• Do not use batteries if the covering has been

peeled off.

Mishandling of batteries can cause

electrolyte leakage which can damage items

the fluid contacts and may cause a fire.

Remove batteries if the remote control is not

going to be used for a long period of time.

Store in a cool, dark place.

AA, R6, UM-3

Remote control signal sensor

6 m (20 feet) directly

in front of the unit

GETTING STARTED

2 En

This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on the discs and/or

packaging.

This chart shows the different type of discs recorded with DVD recorders, DVD video cameras, personal computers, etc. that you can use.

This mark means you must finalize the disc with the DVD recorder, etc. before playback. For details about finalizing, refer to the operating

instructions for your equipment.

This chart shows the different type of cards recorded with High Definition Camcorder or personal computers, etc. that you can use.

DISC AND CARD INFORMATION

Packaged discs

Recorded discs

SD cards

Type of media/Logo

Features

Indicated as

BD-Video

High Definition (HD) movie and music

discs

Type of media/Logo

Features

Indicated as

DVD-Video

High quality movie and music discs

Compact Discs (CD’s) that contain audio

and music

• Operation and sound quality of CDs

that do not conform to CD-DA

specifications (copy control CDs,

etc.) cannot be guaranteed.

• It may not be possible to play the above discs in some cases due to the type of discs,

the condition of the recording, the recording method and how the files were created.

• When a disc recorded in the AVCHD format is being played, the video may be

paused for a few seconds at portions spliced, due to deletion or editing.

Type of media/Logo

Formats

Indicated as

BD-RE

• Version 3 of the BD-RE Recording

Format

•JPEG format

BD-R

• Version 2 of the BD-R Recording

Format

DVD-RAM

• Version 1.1 of the DVD Video

Recording Format

•JPEG format

• AVCHD format

DVD-R/RW

• DVD-Video Format

• Version 1.1 of the DVD Video

Recording Format

• AVCHD format

Type of media/Logo

Formats

Indicated as

DVD-R DL

• DVD-Video Format

• Version 1.2 of the DVD Video

Recording Format

• AVCHD format

DVD+R/+RW/

+R DL

• DVD+VR (DVD+R/+RW Video

Recording) Format

• AVCHD format

CD-R/RW

• CD-DA format

•MP3 format

•JPEG format

* Including miniSD Card and microSD Card

• When using from 4 GB to 16 GB SD cards, only SD cards that display the SDHC logo

can be used.

• This unit is compatible with SD Memory Cards that meet SD Card Specifications

FAT 12 and FAT 16 formats, as well as SDHC Memory Cards in FAT 32 format.

• In t

s owner

’

s manua

, t

e car

s s

own

n t

e ta

(] l

)

are compre

ens

called SD cards.

• A miniSD Card and a microSD Card must be used with the attached

adaptor that comes with the card.

• Usable memory is slightly less than the card capacity.

• If the SD card is formatted on a PC, you may not be able to use it on this

unit.

• Keep the Memory Card out of reach of children to prevent swallowing.

• When a card recorded in the AVCHD format is being played, the video

may be paused for a few seconds at portions spliced, due to deletion or

edition.

• Switch the write-protect switch to the “LOCK” position to protect the content from

accidental erasure.

Type of media Formats Indicated as

SD Memory Card*

(from 8 MB to 2 GB)

SDHC Memory Card

(from 4 GB to 16 GB)

•JPEG format

• AVCHD format

GETTING STARTED

3 En

English

• Enjoy Final Standard Profile functions (] 11), such as picture-in-picture. The various functions differ depending on the disc.

• When playing a set of two or more BD-Video discs, the menu screen of the previous disc may continue to display even if the disc has been ejected.

• Regarding high specification audio (7.1ch) of BD-Video such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-

HD Master Audio (] 19)

– they can be reproduced in the original format only when connected to a compatible amplifier/receiver with a HDMI AV OUT terminal (] 5) and when “BD-

Video Secondary Audio” is set to “Off” and “Bitstream” is selected in each format.

– they are output only as Dolby Digital bitstream when “BD-Video Secondary Audio” is set to “On” even when the unit is connected using the HDMI AV OUT

terminal.

– they are output only as Dolby Digital or DTS bitstream (depending to the original format) when the unit is connected using the DIGITAL AUDIO OUT terminal.

The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format

so play may not be possible.

*1: ISO9660 level 1 or 2 (except for extended formats), Joliet

This unit is compatible with multi-session.

This unit is not compatible with packet writing.

*2: Discs must conform to UDF 2.0.

*3: Discs must conform to UDF 2.5.

*4: Design rule for Camera File system: unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).

Structure of MP3 and still pictures (JPEG) folders

You can play MP3 and still pictures (JPEG) with this unit by making folders on disc as shown

(] right).

• Folder structure created on a DVD-RAM, BD-RE or an SD card is not displayed.

MP3 files and folders in CD-R/RW

Prefix with 3-digit numbers in the order you want to play them.

Still pictures (JPEG) in CD-R/RW

Files inside a folder are displayed in the order they were updated or taken.

When the highest level folders are “DCIM” folders, they are displayed first on the tree.

Regarding BD-Video

Note about using a DualDisc

Tips for making MP3/JPEG files

File format MP3 JPEG

Playable media

CD-R/RW

, DVD-RAM

, BD-RE

, SD card

Extension

Files must have the extension “.mp3” or “.MP3”. Files must have the extension “.jpg” or “.JPG”.

Picture resolution

– between 34 × 34 and 5120 × 3840 pixels

(sub sampling is 4:2:2 or 4:2:0)

Bit rates

32 kbps to 320 kbps –

Sampling frequency

44.1 kHz/48 kHz –

Reference

ID3 tags: version 1, 2.2, 2.3, 2.4

ID3 is a tag embedded in MP3 track to provide

information about the track.

This unit supports the versions listed above but only titles

and the names of artists can be displayed.

• If there is a large amount of still picture data etc. within

a MP3 file, play may not be possible.

• MOTION JPEG: not supported

• SD card: JPEG conforming DCF

(Design rule for

Camera File system)

Thawing Time: approx. 2 sec. (7M pixels)

• English alphabet and Arabic numerals are displayed correctly. Other characters may not be displayed correctly.

• The display order on this unit may differ from how the order is displayed on a computer.

• Depending on how you create the media (writing software), files and folders may not play in the order you

numbered them.

• This unit is not compatible with packet-write format.

• Depending on the recording conditions, the media may not play.

• Operation may take time to complete when there are many files and/or folders and some files may not display or

be playable.

Discs that cannot be played

e.g.,

•

e cartr

• 2.6 GB and 5.2 GB DVD-RAM

• 3.95 GB and 4.7 GB DVD-R for Authoring

• DVD-RAM that cannot be removed from their cartridges

• Version 1.0 of DVD-RW

• DVD+R 8 cm (3"), DVD-ROM, CD-ROM, CDV, Photo CD, MV-Disc and PD

• SACD (except for CD layer)

• DVD-Audio (exce

t for DVD-Video

art)

•

Vid

SVCD

• WMA discs

• DivX discs

•PAL discs

• HD DVD

• BD-Video discs recorded at a rate of 50 frame per second

• Other discs that are not specifically supported

GETTING STARTED

4 En

From the list below, please choose the connection method that fits your TV viewing environment best.

• If you connect to a television using an included Audio/Video cable ]

• If you connect to an HDMI (] 28) compatible television ]

• If you connect to an HDMI compatible television and an HDMI compatible amplifier/receiver to enjoy surround sound ] (] 5)

• For other connection methods, please see pages 5 and 6.

Connecting to a television with an Audio/Video cable

Connecting to an HDMI compatible television

You can enjoy high quality, digital video and audio.

CONNECTION

• Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.

• Turn off all equipment before connection and read the appropriate operating instructions.

Conserving power

This unit consumes a small amount of power even when it is turned off (less than 1 W). To save power when the unit is not to be used for

a long time, unplug it from the household AC outlet.

Please use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the cover).

Basic connections

Notes

• Connect terminals of the same color.

• High definition video cannot be output

with this connection.

Use connection , or (] 5) for

high definition video.

* With audio cables, connect the AUDIO OUT

terminals to the two-channel audio input

terminals of an analog amplifier/receiver or

system component in place of a television to

enjoy stereo sound.

To improve picture quality

• Use connections or (] 5).

To enjoy a richer sound

• Use connections or (] 6). (Unplug

the red and white plugs.)

Note

NECESSARY SETTINGS

• “HDMI Video Mode” and “HDMI Audio

Output” : “On” (] 20)

To enjoy a richer sound

• Use connections or (] 6)

additionally.

In this case, set “HDMI Video Mode” to

“On” and “HDMI Audio Output” to “Off”

(] 20).

With this connection, you can use linked

operations with the TV (] 15)

Television

Audio/Video cable

(included)

AUDIO/

VIDEO IN

VIDEO OUT

2ch AUDIO OUT*

Cooling fan

Back of the unit

Power cable (included)

Connect only after all other

connections are complete.

To a household AC outlet

(AC 120 V, 60 Hz)

Tips

HDMI

compatible

television

HDMI cable

HDMI AV OUT

Cooling fan

Back of the unit

Power cable (included)

Connect only after all other

connections are complete.

To a household AC outlet

(AC 120 V, 60 Hz)

HDMI IN

Tips

GETTING STARTED

5 En

English

Connecting to an HDMI compatible television and HDMI compatible amplifier/receiver

When connected to a compatible amplifier/receiver, you can enjoy surround sound recorded with Dolby Digital Plus, Dolby TrueHD or

DTS-HD.

With S VIDEO OUT

The S VIDEO OUT terminal provides a more vivid picture than the VIDEO OUT terminal.

With COMPONENT VIDEO OUT

You can enjoy high definition images by connecting to a component video terminals that supports 720p (750p) and 1080i (1125i) signals.

Notes

NECESSARY SETTINGS

• “HDMI Video Mode” and “HDMI Audio

Output” : “On” (] 20)

• “Speaker” : “Multi Channel” (] 20)

• “Digital Audio Output” : Depending on the

connected amplifier/receiver (] 19)

With this connection, you can use linked

operations with the TV (] 15)

Connection methods for using other video terminals

Notes

• High definition video cannot be output

with this connection.

Use connection (] 4), or for

high definition video.

• Unplug the yellow plug of Audio/Video

cable.

• Actual video quality depends on the

television.

Notes

• Connect terminals of the same color.

• Unplug the yellow plug of Audio/Video

cable.

• Set “Black Level Control” to “Darker”.

(] 18)

• Some discs prohibit high definition video

output from COMPONENT VIDEO OUT

terminals. In this case, video resolution is

converted to 480p.

To enjoy high definition/progressive video

• Connect to a television that supports 480p

or higher.

• Set “Component Video Resolution” to

“480p”, “720p” or “1080i”. (] 20)

• Set “HDMI Video Mode” to “Off”. (] 20)

Otherwise, the video is output as 480i.

HDMI

compatible

television

HDMI IN

Power cable (included)

Connect only after all

other connections are

complete.

To a household AC outlet

(AC 120 V, 60 Hz)

Multi channel speakers

Back of the unit

HDMI Cable

HDMI compatible

amplifier/receiver

HDMI IN

HDMI AV OUT

HDMI OUT

Cooling fan

Tip

Television

Audio/

Video cable

(included)

S Video cable

Back of the unit

Television

Audio/Video cable

(included)

Component

Video cable

Back of the unit

Tip

GETTING STARTED

6 En

With 5.1ch AUDIO OUT

When connected to a compatible amplifier/receiver using the 5.1ch AUDIO OUT terminals, you can enjoy surround sound.

With DIGITAL AUDIO OUT

You can enjoy surround sound, when connected to an amplifier/receiver using the COAXIAL or OPTICAL terminal.

Connecting an amplifier/receiver (excluding HDMI connection)

Notes

NECESSARY SETTINGS

• “Speaker” : “Multi Channel” (] 20)

• 7.1 channel disc is mixed down to 5.1

channel audio.

When connected to an HDMI compatible

television (] 4, )

• “HDMI Audio Output” : “Off” (] 20)

(Otherwise, the sound is output from the

television.)

• Depending on how the disc was recorded,

the audio may not be output properly on

the number of channels desired.

Notes

NECESSARY SETTINGS

• “Digital Audio Output” : Depending on the

connected amplifier/receiver (] 19)

When connected to an HDMI compatible

television (] 4, )

• “HDMI Audio Output” : “Off” (] 20)

(Otherwise, the sound may not be output

with the desired settings.)

Multi channel speakers

Connect Audio

cables to terminals

corresponding to

the speakers you

have connected.

Amplifier/receiver with

5.1ch AUDIO IN

Cable connections

Front speaker (L/R)

Surround speaker (L/R)

Center speaker

Subwoofer

Back of the

unit

Coaxial cable

With COAXIAL

Back of the unit

Amplifier/receiver with a

built-in decoder or a

decoder-amplifier/

receiver combination

Optical digital

audio cable

With OPTICAL

Back of the unit

Amplifier/receiver with a

built-in decoder or a

decoder-amplifier/

receiver combination

GETTING STARTED

7 En

English

1 Select disc drive or SD card drive (] 9)

2 Switch on/off Secondary Audio (] 11)

3 Switch on/off Secondary Video (Picture-in-picture) (] 11)

4 Basic playback control buttons (] 9, 10)

5 Show TOP MENU/DIRECT NAVIGATOR (] 9)

6 Selection/OK, Frame-by-frame (] 10)

7 Show sub menu (] 12)

8 Show on-screen menu (] 16)

9 Show FUNCTIONS menu (] 14)

0 Show status messages (] 10)

q These buttons are used when operating a BD-Video disc that

includes Java™ applications (BD-J). For more information about

operating this kind of disc, please read the instructions that came

with the disc.

The [A] and [B] buttons are also used with the “Title View”, “Picture

View” and “Album View” screens (

] 12).

w Numbered buttons

Select title numbers, etc./Enter numbers (] 10)

e Transmit the remote control signal

r Turn the unit on and off (] 8)

t Show Setup menu (] 18)

y Select audio (] 10)

u Show Pop-up menu (] 11)

i Return to previous screen

o Clear

p Provides the same function as OK button

This button is used to fix the setting immediately after pressing the

numbered buttons.

Using remote control functions

• For details about the SCENE function,

refer to the owner’s manual supplied with

your Yamaha AV amplifier/receiver.

• The REMOTE CONTROL (IN, OUT)

jacks are also used in custom installation.

• You can connect a Yamaha component

(such as DVD player and CD player)

corresponds with the SCENE function to

the REMOTE CONTROL (OUT) jack of

this unit.

Note

When using the SCENE function, do not

connect a power cable of this unit to AC

outlet on the rear panel of AV amplifier/

receiver.

REMOTE CONTROL (ON, OFF) switch

Switches the remote control (RS-232C) on or off. When using REMOTE CONTROL (RS-232C)

terminal, set this switch to ON.

REMOTE CONTROL (IN/OUT) jacks

Connect to the remote control output/input jack of your audio/video component. If your AV

amplifier/receiver is a Yamaha product and has the capability to transmit of SCENE control

signals, you can use the SCENE function by connecting REMOTE CONTROL IN jack of this

unit to the REMOTE OUT jack of the amplifier/receiver.

REMOTE CONTROL (RS-232C) terminal

Use as an expansion terminal for commercial use. Consult your dealer for details.

Amplifier/receiver

with REMOTE OUT

jack

Monaural 3.5mm

mini plug cable

Back of the unit

Tips

CONTROL REFERENCE GUIDE

CAUTION

Do not place objects in front of the unit. The disc tray may

collide with objects when it is opened, and this may cause injury.

GETTING STARTED

8 En

1 STANDBY/ON button (] 8)

Press to switch the unit from on to standby mode or vice versa. In

standby mode, the unit is still consuming a small amount of power.

2 Disc tray (] 9)

3 Display

The indicator blinks when reading data from a disc or card.

4 SD Card LED

• It is possible to set the LED to turn on/off. (] 20, SD Card

LED Control)

5 SD card slot (] 9)

6 Remote control signal sensor (] 1)

7 Open or close the disc tray (] 9)

8 Search/Slow-motion/Skip (] 10)

Search: Press and hold (During play)

Slow-motion: Press and hold (During pause)

Skip: Press

9 Start play (] 9)

0 Pause (] 10)

q Stop (] 10)

Rear panel terminals (] 4-6)

After connecting your new player and pressing the standby/on button, a screen for the basic settings will appear.

Disc indicator SD card indicator

EASY SETTING

Preparation

Turn on the television and select the appropriate video input on the television.

1 Press [ STANDBY/ON].

➜ Setup screen appears.

2 Follow the on-screen instructions and make the settings with

[, ] and [OK].

➜ “On-screen Language” and “TV Aspect” (] 20) are set.

• You can perform this setup anytime by

selecting “Easy Setting” in the Setup

menu. (] 18)

• You can also change these settings

individually. (] 18)

• If this unit is connected to a Panasonic TV

(VIERA) supporting HDAVI Control 2 via

an HDMI cable, then the “On-screen

Language” and “TV Aspect” setting

information on the TV are captured from

the TV.

Tips

PLAYBACK

9 En

English

Instructions for operations are generally described using the remote control in this owner’s manual.

Preparation

Turn on the television and select the appropriate video input on the television.

PLAYBACK

BASIC PLAY (PLAYING VIDEO CONTENTS)

1 Press [ STANDBY/ON] to turn on the unit.

2 Press [ OPEN/CLOSE] to open the disc tray and load the disc.

• Press the button again to close the tray.

• Load double-sided discs so the label for the side you want to play is facing

up.

• DVD-RAM: Remove discs from their cartridges before use.

Play starts.

• If a disc with data in different file formats is inserted, the file selection menu is displayed.

Press [ , ] to select the desired file format and press [OK].

• If play does not start, press [ ] (PLAY).

• If the menu is displayed, press [ , , , ] to select the item and press [OK].

• If the screen prompting you to use the color buttons appears, continue to operate with the color

buttons on the remote control.

Note

DISCS CONTINUE TO ROTATE WHILE

MENUS ARE DISPLAYED.

Press [ ] when you have finished playback

to protect the unit’s motor, your television

screen and so on.

To switch drives

Press [BD/SD] to select “BD” to play a disc.

• If a disc or an SD card is inserted while the

unit is stopped, the drive switches

automatically depending on the inserted

media.

To display menus

Press [TOP MENU/DIRECT

NAVIGATOR].

• The producers of the disc can control how

discs are played. So you may not always be

able to control play as described in this

owner’s manual.

Read the disc’s instructions carefully.

You can play data in AVCHD format

recorded on an SD card.

e.g.,

Video

Picture

9/ 5

9/ 6

9/ 7

Wed

Thu

Fri

IN 2

VHS

IN 2

10:00AM

11:30AM

11:59PM

10:00AM

11:30AM

11:59PM

10:00AM

10:30AM

11:30AM

11:59PM

No.

Date Day Channel

Title Name

SUB

Play

RETURN

Video Picture

DIRECT NAVIGATOR

DVD-RAM(VR)

Title View

Start

Previous Next

Page 01/02

Wed

A B

0:15 (SP)

Rec. Length

e.g.,

Tips

Tip

PLAYBACK

10 En

These functions may not work depending on the disc.

Other operations during play

Stop

The stopped position is memorized.

Resume play function

Press [ ] (PLAY) to restart from this position.

• The position is cleared if the tray is opened or you press [ ] several

times to display “STOP” on unit’s display.

• : The position is cleared if the unit is turned off.

Pause

• Press [ ] again or [ ] (PLAY) to restart play.

Search/Slow-motion

The speed increases up to 5 steps.

• Press [ ] (PLAY) to revert to normal playback speed.

• For some discs, the speed may not change.

While playing, press [ ] or [ ].

• Press and hold [ ] or [ ] on the main unit.

• :

Audio is heard during first level of forward search.

• : The speed is fixed to a single step.

Slow-motion

While paused, press [ ] or [ ].

• Press and hold [ ] or [ ] on the main unit.

• : Forward direction [ ] only.

• : If continued for approx. 5 minutes, slow-motion play pauses

automatically.

Skip

Skip to the title, chapter or track you want to play.

• Each press increases the number of skips.

Starting from a selected item

Play starts from the selected title or chapter.

• While stopped (the image on the right is

displayed on the screen), the title is designated.

While playing, the chapter is designated.

Frame-by-frame

While paused, press [ ] or [ ].

Each press shows the next frame.

• Press and hold to change in succession forward or backward.

• Press [ ] (PLAY) to revert to normal playback speed.

• : Forward direction [ ] only.

e.g., 5: [0] ] [0] ] [5]

15: [0] ] [1] ] [5]

e.g., 5: [0] ] [5]

15: [1] ] [5]

Screen Aspect

When black bars are shown at the top, bottom, left, and right sides of the

screen, you can enlarge the image to fill the screen.

1 Press [SUB MENU].

2 Press [ , ] to select “Screen Aspect” and press [OK].

3 Press [ , ] to select “Side cut” or “Zoom”.

Normal: Normal output

Side cut: The black bars on the right and left sides of the 16:9 image

disappear and the image is enlarged. Please note that the right

and left sides of the image are cut off when the black bar is not

displayed.

Zoom: The black bars on the top and bottom sides of the 4:3 image

disappear and the image is enlarged. Please note that the top

and bottom sides of the image are cut off when the black bar is

not displayed.

• When “TV Aspect” (] 20) is set to “4:3 Pan & Scan” or “4:3 Letterbox”,

the “Zoom” effect is disabled.

Status messages

The status messages give you information about what is currently being

played. Each time you press [STATUS], the information displayed will

change.

Changing audio during play

You can change the audio channel number each time you press the

button. This allows you to change the soundtrack language (] 16,

Soundtrack), etc.

Play

BD-Video

T1 C1 0:05.14

0:20.52

No display

e.g.,

Type of disc Play status

T: Title

C: Chapter

PL: Playlist

Items change depending on the disc

played.

Elapsed time in the title

Current position Total time

Depending on the kind of disc or the playback status,

this display may not appear.

1 ENG Digital 3/2.1ch

Soundtrack

e.g.,

English is selected.

Play

DVD-RAM(VR)

AudioLR

“AudioLR” is

selected

AudioLR AudioL AudioR

PLAYBACK

11 En

English

Some discs permit a variety of interactive functions in addition to the ordinary playback operation.

The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating method, refer to the

instructions for the disc.

Secondary video can be played from a disc compatible with the picture-in-picture function.

For the playback method, refer to the instructions for the disc.

DIFFERENT KINDS OF PLAYBACK FOR BD-VIDEO

Showing Pop-up menu

1 Press [POP-UP MENU].

2 Press [ , , , ] to select the item and press

[OK].

• Pop-up menu also appears by pressing [SUB MENU]

and selecting “Pop-up Menu”.

To exit the screen

• Press [POP-UP MENU].

•The Final Standard Profile [“Picture-in-picture”, “Virtual Package” (] below), etc.] is a new playback function of BD-Video. Contents of playback and

the operating method may vary with the disc. For details, refer to the instructions for the disc.

Playing secondary video (picture-in-picture) and secondary audio

To turn on/off secondary video

Press [PIP].

➜ Secondary video is played.

• “PiP ON” is displayed.

• Press the button to turn it ON and OFF.

To turn on/off audio with the secondary video

Press [SECONDARY AUDIO].

➜ The secondary audio is played.

• “Secondary Audio ON” is displayed.

• Press the button to turn it ON and OFF.

Notes

• Only the primary video is played during search/ slow-

motion or frame-by-frame.

• When “BD-Video Secondary Audio” in “Digital

Audio Output” is set to “Off”, secondary audio will

not be played even if [SECONDARY AUDIO] is

pressed. Please check the “BD-Video Secondary

Audio” is set to “On” (] 19).

Virtual package

For a disc compatible with the virtual package (] 28), data is copied to other media

(] 28, Local storage) from the disc to use the different functions while playing the data.

For this unit, data is copied to an SD card.

The methods for copy and playback and the required available capacity on the card may

vary with the disc. For details, refer to the instructions for the disc.

To use the above functions, it is recommended that you format the card on this unit.

Format the card using the following procedures. BD-Video data, such as secondary video

recorded on the card, can also be erased with the following procedures.

■ Formatting SD cards/Deleting data

1 Insert an SD card (] 12).

2 Press [FUNCTIONS].

3 Press [ , ] to select “Other Functions” and press [OK].

4 Press [ , ] to select “Card Management” and press [OK].

5 Press [ , ] to select “BD-Video Data Erase” or

“Format SD Card” and press [OK].

6 Press [ , ] to select “Yes” and press [OK].

7 Press [ , ] to select “Start” and press [OK].

Notes

• If the SD card is removed from this unit when using

data that was copied with the virtual package function,

disc playback stops.

• Images and audio may freeze momentarily during

playback.

• Data cannot be copied in the following cases.

– The card is protected.

– Available capacity on the card is too small.

Delete unnecessary data or use a new card.

• When the function fails to work properly, even if the

data is copied, format the card again with this unit. (In

this case, all data will be erased.)

If an SD card with files in different formats is used,

images and audio may not play back properly. It is

recommended that you use an SD card with no data or an

SD card formatted on this unit.

Note

It is impossible to restore data after formatting the card or

erasing the data. Once a card is formatted, all data

including those recorded on the PC is erased as well,

even if the data were protected with other equipment.

Confirm whether the card can be formatted.

e.g.,

Tips

Secondary video

Primary video

Free space 300 MB

SD card

Format this SD Card.

RETURN

BD-Video Data Erase

Format SD Card

Card Management No. of Files 6

Tip

PLAYBACK

12 En

You can play still pictures recorded onto a BD-RE, DVD-RAM, CD-R/RW and an SD card.

CHAPTER PLAYBACK

1 Insert a disc (] 9).

2 While “Title View” screen is displayed

Press [ , ] to select the title and press [SUB MENU].

3 Press [ , ] to select “View Chapters” and press [OK].

4 Press [ , ] to select the chapter and press [OK].

PLAYING STILL PICTURES

1 Insert a disc (] 9) or an SD card (] right).

• If a disc or an SD card containing data in different file formats

is inserted, the file selection menu may be displayed.

SD card:

Press [ , ] to select “Picture (JPEG) Navigator” and press

[OK].

CD-R/RW:

Press [ , ] to select “Pictures” and press [OK].

2 Press [ , , , ] to select the item and press [OK].

3 Press [ , , , ] to select the still picture and press [OK].

• Insert the SD card into the SD card slot.

– Press on the center of the card until it

clicks into place.

Removing the card

Press on the center of the card and pull it

straight out.

• Press [ , ] to display the previous or

next still picture.

• Press [ , ] to show other pages.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [TOP MENU/DIRECT

NAVIGATOR].

CD-R/RW

Discs containing data in different file formats.

To switch from the MP3 menu to JPEG

menu, perform steps below.

1 Press [FUNCTIONS].

2 Press [ , ] to select “Menu” and press

[OK].

3 Press [ , ] to select “Pictures” and

press [OK].

Note

Small-sized still pictures are displayed with a

frame.

Properties

View Chapters

To picture

To display the title properties

(recording date, etc.)

To select the chapter

Playing still pictures (] below)

e.g.,

Select an action or press [RETURN].

RETURN

SUB

SD Card

Picture (JPEG) Navigator

Playback HD Movie (AVCHD)

e.g.,

BD-RE, DVD-RAM

• “Album View” screen is displayed

• When the “Title View” screen is

displayed, press the [B] button to switch

to the “Album View” screen.

CD-R/RW, SD card

• “Picture View” screen is displayed

➜ Go to step 3

2008 9 12

SUB

Video

Picture

RETURN

Video Picture

DIRECT NAVIGATOR

DVD-RAM(VR)

Album View

106_DVD

Total 13

Total 8

Previous Next

Press [OK] to go to Picture View

Slideshow

Page 02/02

e.g.,

Pictures

CD(JPEG)

SUB

Play

RETURN

Picture View

dog_jpg

Page 01/01

From SUB MENU you can select a folder.

005

009

006

002 003

007

001

008

004

e.g.,

Video

Picture

SUB

Picture View

Play

RETURN

2008 9 12

DIRECT NAVIGATOR

DVD-RAM(VR)

Page 001/001

0008

00040001

0005

0009

0006 0007

0002 0003

e.g.,

Inserting a card

Insert the card label up with the

cut-off corner on the right.

Tips

PLAYBACK

13 En

English

Useful functions during still picture play

Start Slideshow

You can display still pictures one by one at a constant interval.

■ BD-RE, DVD-RAM

1 While the “Album View” screen is displayed

Press [ , , , ] to select the album and press [SUB MENU].

2 Press [ , ] to select “Start Slideshow” and press [OK].

• You can also start slideshow by pressing [ ] (PLAY) after selecting the

album.

■ CD-R/RW, SD card

1 While the “Picture View” screen is displayed

Press [SUB MENU].

2 Press [ , ] to select “Start Slideshow” and press [OK].

To stop slideshow

Press [ ].

Slideshow with music

■ SD card only

If a music CD is inserted in the disc tray while playing slideshows,

the music CD starts playing automatically as background music.

• You cannot search or skip on a music CD.

• When the slideshow stops, playback of the music CD also stops.

Slideshow settings

In step 2 in “Start Slideshow” above,

1 Press [ , ] to select “Slideshow settings” and press [OK].

2 To change the display interval

Press [ , ] to select “Display Interval” and press [ , ] to select

the interval (“Long”, “Normal” or “Short”).

• When a still picture with large number of pixels is played, the display

interval may become longer. Even if the setting is changed, the

display interval may not become shorter.

To repeat slideshow

Press [ , ] to select “Repeat Play” and press [ , ] to select

“On” or “Off”.

3 Press [ , , , ] to select “Set” and press [OK].

Rotate

1 While playing (except for slideshows)

Press [SUB MENU].

2 Press [ , ] to select “Rotate Right” or “Rotate Left” and press

[OK].

• The rotation information will be stored until the unit is turned off or the

media is removed.

Zoom out

This function is only available for small-sized still pictures.

1 While playing (except for slideshows)

Press [SUB MENU].

2 Press [ , ] to select “Zoom out” and press [OK].

• To cancel “Zoom out”, press [ , ] to select “Zoom in” in step 2 and

press [

OK].

• The zoom-out information will not be stored.

To select the still pictures in another folder

■ BD-RE, DVD-RAM

To switch to another higher folder

(Only if there is a multiple number of higher folders recognizable)

1 While the “Album View” screen is displayed

Press [SUB MENU].

2 Press [ , ] to select “Select Root folder” and press [OK].

3 Press [ , ] to select the higher folder and press [OK].

■ CD-R/RW

1 While the “Picture View” screen is displayed

Press [SUB MENU].

2 Press [ , ] to select “Select Folder” and press [OK].

3 Press [ , ] to select a folder and press [OK].

The “Picture View” screen for the folder appears.

To show the picture properties

While playing

Press [STATUS] twice.

To exit, press [STATUS].

Press [OK] to confirm

Select Root folder

Changes the Album folder to be accessed.

\DCIM

CD(JPEG)

006

008

021216_0026

RETURN

Pictures

Folder selection

001

002

003

004

005

007

009

010

103

104

105

F 7/25

Photo

11/12/2007

Folder - picture No.

102 - 0001

Total

3/9

Shooting date

e.g., JPEG on DVD-RAM

PLAYBACK

14 En

You can play generally available music CD or MP3 files recorded onto a CD-R/RW.

Some functions of this unit can be operated from the FUNCTIONS menu.

PLAYING MUSIC

1 Insert a disc. (] 9)

• If a disc containing data in different file formats is inserted,

the file selection menu may be displayed. Press [ , ] to

select “MP3 Music” and press [OK].

2 Press [ , ] to select the track and press [OK].

➜ Play starts on the selected track.

• Discs containing data in different file

formats.

• To switch from the JPEG menu to MP3

menu, perform steps below.

1 Press [FUNCTIONS].

2 Press [ , ] to select “Menu” and

press [OK].

3 Press [ , ] to select “MP3 Music”

and press [OK].

• You can use search and skip functions.

(] 10)

• When the “Screen Saver Function” is set to

“On” (] 20), the screen switches to

Screen Saver mode if there is no operation

for 10 minutes after starting playback.

(Playback continues.)

Playing a track in another folder

1 While the “Music list” is displayed

Press [SUB MENU], press [ , ] to select “Select Folder” and press [OK].

2 Press [ , ] to select a folder and press [OK].

The “Music list” for the folder appears.

Note

You cannot select folders that contain no

compatible tracks.

To return to the previous screen

Press [RETURN].

Playing music continuously even after turning off power to the television

When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 and an

amplifier/receiver, the power of the unit is turned off if the power to the television is turned off, since

“Power off link” (] 15) operates.

The following operations make it possible to keep the power of the unit ON and to play music

continuously.

1 While playing music

Press [SUB MENU].

2 Press [ , ] to select “TV Power” and press [OK].

Notes

• Sound may be discontinued for several

seconds when the power to the television is

turned off.

• If the operation mentioned left is executed

while audio is output from the television,

the sound may not be output from the

amplifier/receiver. It is recommended to

set the amplifier/receiver beforehand so

that audio will be output from the

amplifier/receiver.

SHOWING FUNCTIONS MENU

1 Press [FUNCTIONS].

• Items to be displayed may vary with the media.

2 Press [ , ] to select the item and press [OK].

• Top Menu

•Menu

• Playback

• SD card Switches to the SD drive.

• BD/DVD/CD Switches to the disc drive.

• Other Functions “Setup” (] 18)

“Card Management” (] 11)

“Playlists”:

You can play playlists created on DVD-VR.

Press [ , , , ] to select the playlist and press [OK].

MP3 Music

Select an action or press [RETURN].

Pictures

RETURN

SUB

0.09 4.30

4min30sec

3min41sec

4min30sec

3min11sec

5min 2sec

Play

RETURN

Music list

DIRECT NAVIGATOR

Track1

5 Tracks / Total Play Time 20min54sec

Track Name Play Time

Track1

Track2

Track3

Track4

Track5

“ ” indicates the track currently playing.

e.g.,

Tips

CD(MP3)

RETURN

DIRECT NAVIGATOR

Select Folder

F 7/25

MP3 music

001 My favorite

002 Brazilian pops

003 Chinese pops

004 Czech pops

005 Hungarian pops

006 Liner notes

007 Japanese pops

008 Mexican pops

009 Philippine pops

010 Swedish pops

011 Momoko

012 Standard number

013 Piano solo

014 Vocal

Selected folder No. /Total folders

If the folder has no track, “– –” is displayed as folder

number.

Tip

RETURN

SUB

Other Functions

SD card

FUNCTIONS

BD Player

DVD-Video

Top Menu

e.g.,

PLAYBACK

15 En

English

LINKED OPERATIONS WITH THE TV

What is linked operations with the TV

What you can do with linked operations with the TV

Easy control only with Panasonic TV (VIERA) remote control

This unit has a convenient function that offers linked operations

that control equipment through HDMI. You can use this function

by connecting TV and/or amplifier/receiver with an HDMI cable.

See the operating instructions for connected equipment for

operational details.

• With linked operations with the TV, you can do the following:

1. Automatic input switching

2. Power on link

3. Power off link

See below for the details.

• This unit offers linked operations with a Panasonic TV with VIERA Link

or EZ Sync™.

• Non-HDMI-compliant cables cannot be utilized.

■ Preparation

1 Connect this unit to your TV or amplifier/receiver with an HDMI

cable (] 4-5).

2 Set “HDMI Control” to “On” (] 20).

(The default setting is “Off”.)

3 Set the linked operations on the connected equipment (e.g., TV).

4 Turn on all connected equipments and select this unit’s input

channel on the connected TV so that the linked operations work

properly.

Also when the connection or settings are changed, repeat

this procedure.

■ Automatic input switching

When the following operations are performed, the television will

automatically switch the input channel and display the corresponding

action.

– When play starts on the unit

– When an action that uses the display screen is performed (e.g., Direct

Navigator screen)

■ Power on link

When the television is off and the following operations are performed,

the television will automatically turn on and display the corresponding

action.

– When play starts on the unit

– When an action that uses the display screen is performed (e.g., Direct

Navigator screen)

■ Power off link

All connected equipment compatible with linked operation through

HDMI, including this unit, automatically turns off when you switch the

television off.

• This unit automatically turns off even during playback or any other

operation.

■ Playing music continuously even after turning off power to

the television (] 14)

Notes

• When [ ] (PLAY) is pressed on this unit for “Automatic input

switching” or “Power on link”, the playback image is not immediately

displayed on the screen and it may not be possible to watch the contents

from where playback started.

• In this case, press [ ] or [ ] to go back to where playback started.

you connect t

s un

t to a TV t

“

ontro

2”

“

Control 3” function with an HDMI cable, you can operate this unit using the

following buttons on the TV remote control.

[ , , , ], [OK], [RETURN], [SUB MENU] and colored buttons

Use the remote control for this unit to operate any other buttons

(numbered buttons, etc.) that are not listed above.

• Refer to the TV operating instructions for operating TV.

■ Using the FUNCTIONS menu to operate this unit

By using the TV remote control, you can play media

using the FUNCTIONS menu.

1 Press the button for VIERA Link or EZ Sync™

on the remote control.

2 Select the player.

• The FUNCTIONS menu is displayed.

When you want to leave the TV on and set only

this unit to standby mode

Press [ STANDBY/ON] on this unit’s remote control and set to

standby mode.

When not using linked operations with the TV

Set “HDMI Control” in the Setup menu to “Off”. (

] 20)

■ U

e su

o opera

thi

s un

By using the TV remote control, you can play discs

using the “Control Panel” and display the Top Menu

(for BD-Video and DVD-Video) or Pop-up Menu (for

BD-Video).

1 Press [SUB MENU].

➜ This can also be displayed by using the

VIERA menu screen.

2 Select an item, then press [OK].

RETURN

SUB

Other Functions

SD card

FUNCTIONS

BD Player

DVD-Video

Top Menu

e.g.,

Control Panel Control Panel is displayed.

Follow the indications on

the screen.

Screen Aspect (] 10)

Top Menu Top menu is displayed.

Menu Menu is displayed.

Pop-up Menu Pop-up menu is displayed.

Rotate Right Rotate the still picture.

Rotate Left

Zoom in Enlarge or shrink the still

picture.

Zoom out

RETURN

SUB

Screen Aspect

Pop-up Menu

Top Menu

Control Panel

e.g.,

Note

You cannot use the sub menu while the Top

Menu for BD-Video or DVD-Video is

displayed.

SETTINGS

16 En

Some items may be changed only on the disc specific menu. (] 9, 11)

SETTINGS

CHANGING SETTINGS WITH THE ON-SCREEN MENU

On-screen menu operations

1 Press [ON SCREEN].

2 Press [ , ] to select the menu and

press [ ].

3 Press [ , ] to select the item and

press [ ].

4 Press [ , ] to select the setting.

Note

Depending on the condition of the unit

(playing, stopped, etc.) and disc contents,

there may be some items that you cannot

select or change.

• Some items can be changed by pressing

[OK].

To exit the on-screen menu

Press [ON SCREEN].

What you can change with the on-screen menu

Menus Items Settings and details

Disc Signal Type

• Primary Video

Video: The video recording method appears. (] below, Video recording method)

Soundtrack: Select the type of audio or language. (] below, Language, Audio attribute)

• Secondary Video

Video: Select on/off of images.

The video recording method appears. (] below, Video recording method)

Soundtrack: Select on/off of audio and the language. (] below, Language, Audio attribute)

Video

The video recording method appears. (] below, Video recording method)

Soundtrack

Select the type of audio or language. (] below, Language, Audio attribute)

The audio attributes appear. (] below, Audio attribute)

Subtitle

Turn the subtitle on/off and select the language. (] below, Language)

(Only discs that contain subtitle on/off information)

Turn the subtitle on/off.

Subtitle Style

Select the subtitle style.

Audio channel

(] 10, Changing audio during play)

Angle

Select the number of the angle.

Video recording method

MPEG-2 This is a standard for compressing and decompressing color motion pictures efficiently. This compression method is used for DVDs, etc.

MPEG-4 AVC

VC-1

These are standards for compressing and decompressing color motion pictures more efficiently than MPEG-2 and used for Blu-ray Discs,

etc.

Video

Play

Subtitle

Subtitle Style

Off PIP

- -

1ENG

Disc

Audio

Signal Type

Angle

e.g., BD-Video

Menus Items Settings

Tips

Language

ENG: English

FRA: French

DEU: German

ITA: Italian

ESP: Spanish

NLD: Dutch

SVE: Swedish

NOR: Norwegian

DAN: Danish

POR: Portuguese

RUS: Russian

JPN: Japanese

CHI: Chinese

KOR: Korean

MAL:Malay

VIE: Vietnamese

THA: Thai

POL: Polish

CES: Czech

SLK: Slovak

HUN: Hungarian

FIN: Finnish

*: Others

Audio attribute

LPCM/q Digital/q Digital+/

q TrueHD/DTS/DTS-HD

Signal type

ch (channel) Number of channels

k (kHz) Sampling frequency

b (bit) Number of bits

La page charge ...

Yamaha BD-S2900 Manuel utilisateur

Marque: Yamaha

Modèle: BD-S2900

Catégorie: Lecteurs DVD

Taper: Manuel utilisateur

Ce manuel convient également à

BD-S2900 - Blu-Ray Disc Player

Télécharger le PDF

rapport

dans d''autres langues

English: Yamaha BD-S2900 User manual

Yamaha BD-S2900 Manuel utilisateur

Ce manuel convient également à

Yamaha BD-S2900 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents