Sony VPLHW45ES Manuel utilisateur

M:\081\XPML A7.0\ML\New Folder\4580176042_VPL-

HW65_ML\01GB-VPLHW65SY\010COV.fm

masterpage:Ba ck

Cover

Video

Projector

VPL-HW65

VPL-HW45

VPL-HW65/HW45

4-580-176-04 (2)

Quick Reference Manual ____________ GB

Guide de référence rapide __________ FR

Manual de referencia rápida _________ ES

Kurzreferenz_______________________ DE

Guida rapida all’uso ________________ IT

Краткое справочное руководство __ RU

______________________ CT

F:\#Work#\0127\4580176021\4580176021VPLHW65SYQ\01GB-

VPLHW65SY\100BCO.fm

masterpage:Ba ck

Cover

VPL-HW65/HW45

4-580-176-02 (1)

©

2015 Sony Corporation Printed in China

GB

2

This Quick Reference Manual explains the installation and basic operations for projecting

pictures. It also describes important notes and cautions to which you have to pay attention when

handling and using this unit.

Refer to “Warning Indicators,” “Replacing the Lamp,” and “Cleaning the Air Filter” as

necessary.

For details on the operations, refer to the Operating Instructions contained in the supplied CD-

ROM.

About the Quick Reference Manual

Preparing ..................................................Page 12

Installing the Unit..................................Page 13

Connecting the Unit.............................Page 15

Selecting the Menu Language........Page 16

Projecting..................................................Page 17

Error Handling

Warning Indicators.........................................Page 19

Maintenance

Replacing the Lamp .......................................Page 20

Cleaning the Air Filter ....................................Page 23

Step 1

Step 2

Step 3

Step 4

Step 5

3

GB

Before operating the unit, please read this

manual thoroughly and retain it for future

reference.

WARNING

To reduce the risk of fire or electric

shock, do not expose this apparatus

to rain or moisture.

To avoid electrical shock, do not open

the cabinet. Refer servicing to

qualified personnel only.

WARNING

THIS APPARATUS MUST BE

EARTHED.

WARNING

When installing the unit, incorporate a

readily accessible disconnect device in the

fixed wiring, or connect the power plug to an

easily accessible socket-outlet near the unit.

If a fault should occur during operation of

the unit, operate the disconnect device to

switch the power supply off, or disconnect

the power plug.

CAUTION

About the LAN connector (VPL-HW65

only)

For safety, do not connect the connector for

peripheral device wiring that might have

excessive voltage to this port.

WARNING

1. Use the approved Power Cord (3-core

mains lead) / Appliance Connector / Plug

with earthing-contacts that conforms to

the safety regulations of each country if

applicable.

2. Use the Power Cord (3-core mains lead) /

Appliance Connector / Plug conforming

to the proper ratings (Voltage, Ampere).

If you have questions on the use of the above

Power Cord / Appliance Connector / Plug,

please consult a qualified service personnel.

About 3D Glasses

The 3D Glasses communicate with the

projector via Bluetooth technology to

display 3D signals.

(a) frequency band(s) in which the radio

equipment operates:

2.4 - 2.4835 GHz

(b) maximum radio-frequency power

transmitted in the frequency band(s) in

which the radio equipment operates:

4.30 dBm (E.I.R.P.)

As with any bright

light source, do not

stare into the beam,

RG2 IEC 62471-5:

2015.

For the customers in the U.S.A.

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in

a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct

the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and receiver.

- Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced

radio/TV technician for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate

this equipment.

GB

4

All interface cables used to connect

peripherals must be shielded in order to

comply with the limits for a digital device

pursuant to Subpart B of part 15 of FCC

Rules.

This device complies with part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and (2)

this device must accept any interference

received, including interference that may

cause undesired operation.

If you have any questions about this product,

you may call;

Sony Customer Information Service Center

1-800-222-7669 or http://www.sony.com/

This transmitter must not be co-located or

operating in conjunction with any other

antenna or transmitter.

For the customers in Canada

This device complies with Industry Canada

licence-exempt RSS standard(s). Operation

is subject to the following two conditions:

(1) this device may not cause interference,

and (2) this device must accept any

interference, including interference that may

cause undesired operation of the device.

For the customers in the U.S.A. and

Canada

Radiated Exposure Statement:

The product complies with the US/Canadian

portable RF exposure limit set forth for an

uncontrolled environment and is safe for

intended operation as described in this

manual. The further RF exposure reduction

can be achieved if the product can be kept as

far as possible from the user body or if the

device is set to lower output power if such

function is available.

For the customers in Canada

CAN ICES-3 (B)/NMB-3(B)

For kundene i Norge

Dette utstyret kan kobles til et IT-

strømfordelingssystem.

For the customers in Europe

Notice for customers: the following information is only applicable to equipment sold in

Countries applying EU directives.

Declaration of Conformity

Trade Name: SONY

Model: VPL-HW65

VPL-HW45

Responsible party: Sony Electronics Inc.

Address: 16535 Via Esprillo,

San Diego, CA 92127

U.S.A.

Telephone Number:858-942-2230

This device complies with part 15 of the

FCC Rules. Operation is subject to the

following two conditions: (1) This device

may not cause harmful interference, and

(2) this device must accept any interference

received, including interference that may

cause undesired operation.

Bulgarian

С настоящето Сони Корпорация декларира, че VPL-HW65/VPL-HW45

отговаря на основните изисквания и другите съответстващи клаузи на

Директива 1999/5/ЕС.

Подробности може да намерите на Интернет страницата :

http://www.compliance.sony.de/.

Croatian

Ovime Sony Corporation izjavljuje da je VPL-HW65/VPL-HW45 u

skladu s osnovnim zahtjevima i ostalim relevantnim odredbama direktive

1999/5/EZ. Dodatne informacije potražite na sljedećoj internet adresi:

http://www.compliance.sony.de/

5

GB

Czech

Sony Corporation tímto prohlašuje, že tento VPL-HW65/VPL-HW45 je

ve shodě se základními požadavky a dalšími příslušnými ustanoveními

směrnice 1999/5/ES.

Podrobnosti lze získat na následující URL: http://

www.compliance.sony.de/

Danish

Undertegnede Sony Corporation erklærer herved, at følgende udstyr VPL-HW65/

VPL-HW45 overholder de væsentlige krav og øvrige relevante krav i direktiv

1999/5/EF.

For yderligere information gå ind på følgende hjemmeside: http://

www.compliance.sony.de/

Dutch

Hierbij verklaart Sony Corporation dat het toestel VPL-HW65/VPL-HW45 in

overeenstemming is met de essentiële eisen en de andere relevante bepalingen

van richtlijn 1999/5/EG.

Nadere informatie kunt u vinden op: http://www.compliance.sony.de/

English

Hereby, Sony Corporation, declares that VPL-HW65/VPL-HW45 is in

compliance with the essential requirements and other relevant provisions of the

Directive 1999/5/EC.

For details, please access the following URL :http://www.compliance.sony.de/

Estonian

Sony Corporation kinnitab käesolevaga seadme VPL-HW65/VPL-HW45

vastavust 1999/5/EÜ direktiivi põhinõuetele ja nimetatud direktiivist

tulenevatele teistele asjakohastele sätetele.

Üksikasjalikum info: http://www.compliance.sony.de/.

Finnish

Sony Corporation vakuuttaa täten että VPL-HW65/VPL-HW45 tyyppinen laite

on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin

muiden ehtojen mukainen.

Halutessasi lisätietoja, käy osoitteessa: http://www.compliance.sony.de/

Greek

Hungarian

Alulírott, Sony Corporation nyilatkozom, hogy a(z)

VPL-HW65/VPL-HW45

megfelel a vonatkozó alapvető követelményeknek és az 1999/5/EC irányelv

egyéb előírásainak.

További információkat a következő weboldalon találhat: http://

www.compliance.sony.de/

Latvian

Lithuanian

Norwegian

Sony Corporation erklærer herved at VPL-HW65/VPL-HW45 er i samsvar med

de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

For flere detaljer, vennligst se: http://www.compliance.sony.de/

VPL-HW65/VPL-HW45

GB

6

Caution on replacement/disposal of

the battery for the 3D glasses

Danger of explosion if battery is incorrectly

replaced.

Replace only with the same or equivalent

type recommended by the manufacturer.

When you dispose of the battery, you must

obey the law in the relative area or country.

For the Customers in Brazil only

Apenas para clientes no Brasil

DESCARTE DE PILHAS E BATERIAS

Pilhas e Baterias não recarregáveis

Atenção:

Verifique as instruções de uso do aparelho

certificando-se de que as polaridades (+) e

(-) estão no sentido indicado. As pilhas

poderão vazar ou explodir se as polaridades

forem invertidas, expostas ao fogo,

desmontadas ou recarregadas.

Evite misturar com pilhas de outro tipo ou

com pilhas usadas, transportá-las ou

armazená-las soltas, pois aumenta o risco de

vazamento.

Retire as pilhas caso o aparelho não esteja

sendo utilizado, para evitar possíveis danos

na eventualidade de ocorrer vazamento.

As pilhas devem ser armazenadas em local

seco e ventilado.

Polish

Niniejszym Sony Corporation oświadcza, że VPL-HW65/VPL-HW45 jest

zgodne z zasadniczymi wymaganiami oraz innymi stosownymi

postanowieniami Dyrektywy 1999/5/WE.

Szczegółowe informacje znaleźć można pod następującym adresem URL:

http://www.compliance.sony.de/

Portuguese

Sony Corporation declara que este VPL-HW65/VPL-HW45 está conforme com

os requisitos essenciais e outras disposições da Directiva 1999/5/CE.

Para mais informacoes, por favor consulte a seguinte URL: http://

www.compliance.sony.de/

Romanian

Prin prezenta, Sony Corporation declară că VPL-HW65/VPL-HW45

respectă cerinţele esenţiale și este în conformitate cu prevederile

Directivei 1999/5/EC.

Pentru detalii, vă rugăm accesaţi următoarea adresă: http://

www.compliance.sony.de/

Slovak

Sony Corporation týmto vyhlasuje, že VPL-HW65/VPL-HW45 spĺňa

základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.

Podrobnosti získate na nasledovnej webovej adrese: http://

www.compliance.sony.de/

Slovenian

Sony Corporation izjavlja, da je ta VPL-HW65/VPL-HW45 v skladu z

bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.

Za podrobnosti vas naprošamo, če pogledate na URL: http://

www.compliance.sony.de/

Swedish

Härmed intygar Sony Corporation att VPL-HW65/VPL-HW45 står I

överensstämmelse med de väsentliga egenskapskrav och övriga relevanta

bestämmelser som framgår av direktiv 1999/5/EG.

För ytterligare information gå in på följande hemsida: http://

www.compliance.sony.de/

Tu r ki sh

VPL-HW65/VPL-HW45

7

GB

No caso de vazamento da pilha, evite o

contato com a mesma. Lave qualquer parte

do corpo afetado com água abundante.

Ocorrendo irritação, procure auxílio médico.

Não remova o invólucro da pilha.

Mantenha fora do alcance das crianças. Em

caso de ingestão procure auxílio médico

imediatamente.

For Customers in UAE (United Arab

Emirates)

TRA

REGISTERED No: ER0115212/13

DEALER No: DA0065531/11

For the customers in the U.S.A.

SONY LIMITED WARRANTY

- Please

visit http://www.sony.com/psa/warranty

for important information and complete

terms and conditions of Sony’s limited

warranty applicable to this product.

For the customers in Canada

SONY LIMITED WARRANTY

- Please

visit http://www.sonybiz.ca/pro/lang/en/

ca/article/resources-warranty-product-

registration for important information

and complete terms and conditions of

Sony’s limited warranty applicable to this

product.

For the customers in Europe

Sony Professional Solutions Europe -

Standard Warranty and Exceptions on

Standard Warranty.

Please visit http://www.pro.sony.eu/

warranty for important information and

complete terms and conditions.

For the customers in Korea

SONY LIMITED WARRANTY

- Please

visit http://bpeng.sony.co.kr/handler/

BPAS-Start for important information

and complete terms and conditions of

Sony’s limited warranty applicable to this

product.

GB

8

Precautions

On safety

• Check that the operating voltage of your

unit is identical with the voltage of your

local power supply.

• Should any liquid or solid object fall into

the cabinet, unplug the unit and have it

checked by qualified personnel before

operating it further.

• Unplug the unit from the wall outlet if it is

not to be used for several days.

• To disconnect the cord, pull it out by the

plug. Never pull the cord itself.

• The wall outlet should be near the unit and

easily accessible.

• The unit is not disconnected to the AC

power source (mains) as long as it is

connected to the wall outlet, even if the

unit itself has been turned off.

• Do not look into the lens while the lamp is

on.

• Do not place your hand or objects near the

ventilation holes. The air coming out is

hot.

On preventing internal heat build-

up

After you turn off the power with the ?/1

(ON/STANDBY) button, do not disconnect

the unit from the wall outlet while the

cooling fan is still running.

Caution

This unit is equipped with ventilation holes

(intake) and ventilation holes (exhaust). Do

not block or place anything near these holes,

or internal heat build-up may occur, causing

picture degradation or damage to the unit.

On repacking

Save the original shipping carton and

packing material; they will come in handy if

you ever have to ship your unit. For

maximum protection, repack your unit as it

was originally packed at the factory.

On watching 3D video images

Safety precautions

• You should only use the 3D glasses for

watching 3D video images.

• If you observe flickering or flashing, turn

off the lighting in the room.

• Not for use by children without proper

adult supervision.

• Be careful not to pinch your fingers in

hinges of the 3D glasses when bending the

temple frames.

• Do not drop or modify these 3D glasses.

• If these glasses are broken, keep broken

pieces away from your mouth or eyes.

On LCD Projector

The LCD projector is manufactured using

high-precision technology. You may,

however, see tiny black points and/or bright

points (red, blue, or green) that continuously

appear on the LCD projector. This is a

normal result of the manufacturing process

and does not indicate a malfunction.

Also, when you use multiple LCD projectors

to project onto a screen, even if they are of

the same model, the color reproduction

among projectors may vary, since color

balance may be set differently from one

projector to the next.

On condensation

If the room temperature where the projector

is installed changes rapidly, or if the

projector is moved suddenly from a cold to a

warm place, condensation in the projector

may occur. As the condensation may cause

malfunction, be careful in adjusting

temperature settings of the air conditioner. If

condensation occurs, leave the projector

turned on for about two hours before use.

Notes on security (VPL-HW65 only)

• SONY WILL NOT BE LIABLE FOR

DAMAGES OF ANY KIND

RESULTING FROM A FAILURE TO

IMPLEMENT PROPER SECURITY

MEASURES ON TRANSMISSION

DEVICES, UNAVOIDABLE DATA

LEAKS RESULTING FROM

TRANSMISSION SPECIFICATIONS,

9

GB

OR SECURITY PROBLEMS OF ANY

KIND.

• Depending on the operating environment,

unauthorized third parties on the network

may be able to access the unit. When

connecting the unit to the network, be sure

to confirm that the network is protected

securely.

• From a safety standpoint, when using the

unit connected with the network, it is

strongly recommended to access the

Control window via a Web browser and

change the access limitation settings from

the factory preset values (refer to “Using

Network Features” in the Operating

Instructions).

Changing the password regularly is also

recommended.

• Do not browse any other website in the

Web browser while making settings or

after making settings. Since the login

status remains in the Web browser, close

the Web browser when you complete the

settings to prevent unauthorized third

parties from using the unit or harmful

programs from running.

Notes on Installation

and Usage

Do not place the unit in the following

situations, which may cause malfunction or

damage to the unit.

Near walls

To maintain the performance and reliability

of the unit, leave space between walls and

the unit as illustrated.

Poorly ventilated location

Leave space of more than 30 cm (11

7

/

8

inches) around the unit.

Note

SONY WILL NOT BE LIABLE FOR

DAMAGES OF ANY KIND

RESULTING FROM THE USE OF

THIS UNIT FOR PURPOSES OTHER

THAN GENERAL HOME USE,

EITHER DURING THE WARRANTY

PERIOD OR AFTER EXPIRATION OF

THE WARRANTY.

Unsuitable installation

30 cm

(11

7

/

8

inches)

30 cm

(11

7

/

8

inches)

30 cm

(11

7

/

8

inches)

30 cm

(11

7

/

8

inches)

GB

10

Hot and humid

Locations subject to direct cool or

warm air from an air-conditioner

Installing the unit in such a location may

cause a malfunction of the unit due to

moisture condensation or rise in

temperature.

Near a heat or smoke sensor

Malfunction of the sensor may occur.

Very dusty and extremely smoky

locations

Do not do any of the following while using

the unit.

Blocking the ventilation holes (intake

or exhaust)

Tilting front/rear and left/right

Avoid using the unit tilted at an angle of

more than 15 degrees.

Do not install the unit anywhere other than

on a level surface or on the ceiling. Installing

the unit in such a location may result in

uneven color uniformity or reduce the

reliability of the effects of the lamp.

If the unit is tilted up or down, the image on

the screen may be trapezoidal.

Position the unit so that the lens is parallel to

the screen.

Unsuitable Conditions

Ventilation holes

(exhaust)

Ventilation holes

(intake)

15° or more

11

GB

When installing the unit at high

altitudes

When using the unit at an altitude of

1,500 m (approx. 4,900 ft) or higher, set

“High Altitude Mode” on the Setup

menu to “On”. Failing to set this mode when

using the unit at high altitudes could have

adverse effects, such as reducing the

reliability of certain components.

• Never mount the projector on the ceiling

or move it by yourself. Be sure to consult

with qualified Sony personnel (charged).

• When installing the unit on a ceiling, be

sure to use a safety wire, etc., to prevent

the unit from falling. Entrust the

installation to an experienced contractor or

installer.

For dealers

• When the projector is mounted on the

ceiling, a Sony bracket or recommended

equivalent must be used for installation.

• Be sure to secure the cabinet cover firmly

when installing to the ceiling firmly.

Safety precautions for

installing the unit on a ceiling

15° or more

GB

12

Check the carton to make sure it contains the

following items:

• Remote control RM-PJ28 (1)

• Size AA (R6) manganese batteries (2)

• AC power cord (1)

•Lens cap (1)

When you have purchased the projector,

the lens cap is put onto the lens. Remove

this lens cap when you use the projector.

• Quick Reference Manual (this manual) (1)

• Operating Instructions (CD-ROM) (1)

CAUTION

Danger of explosion if battery is incorrectly

replaced.

Replace only with the same or equivalent

type recommended by the manufacturer.

When you dispose of the battery, you must

obey the law in the relative area or country.

Caution

Two size AA (R6) batteries are supplied for

Remote Control.

To avoid risk of explosion, use size AA (R6)

manganese or alkaline batteries.

Caution about handling the remote

control

• Handle the remote control with care. Do

not drop or step on it, or spill liquid of any

kind onto it.

• Do not place the remote control in a

location near a heat source, a place subject

to direct sunlight, or a damp room.

The manual can be read on a computer with

Adobe Reader installed.

You can download Adobe Reader free from

the Adobe website.

1 Open the index.html file in the CD-

ROM.

2 Select and click on the manual that

you want to read.

If you have lost or damaged the CD-ROM, you

can purchase a new one from your Sony dealer

or Sony service counter.

Preparing

Step 1

Checking the Supplied

Accessories

Inserting the Batteries into

the Remote Control

Push and slide to

open.

Insert the batteries E

side first.

Using the CD-ROM manual

Note

13

GB

1 Position the unit so that the lens is

parallel to the screen.

2 After connecting the AC power cord to

the unit, plug the AC power cord into

a wall outlet.

After connecting the AC power cord to the unit,

the ON/STANDBY indicator may blink in

orange.

You may not be able to control the unit while

the indicator is blinking, but this is not a

malfunction. Wait until it stops blinking and

remains lit in red.

3 Press the ?/1 (ON/STANDBY) button

to turn on the unit.

4 Press the PATTERN button to display

a test signal for performing

adjustments.

a Move both lens shift dials to

adjust the picture position.

b Adjust the picture size using the

zoom lever.

Installing the Unit

Step 2

Note

Lights in red.

Top of the unit

Flashes in green for a

while (tens of seconds)

and then lights in green.

Top of the unit

To adjust the vertical

position

To adjust the horizontal

position

Zoom lever

GB

14

c Adjust the focus using the focus

ring.

Lens adjustment window (test pattern)

Focus ring

2.35:1

4:3

1.85:1

The dashed lines show the screen sizes of each

aspect ratio.

For more information, refer to

“Connections and Preparations” in the

Operating Instructions contained in the

supplied CD-ROM.

15

GB

When making connections, be sure to do the following:

• Turn off all equipment before making any connections.

• Use the proper cables for each connection.

• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor

picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable

itself.

• Refer to the operating instructions of the connected equipment.

Connecting the Unit

Step 3

Right side of the unit

AV amplifier

Speakers

Equipment with HDMI

output connectors

Computer

to HDMI output

HDMI cable (not supplied)

: Video signal flow Use a high speed HDMI cable on which the cable type logo

is specified. (Sony products are recommended.)

For more information, refer to “Connections and

Preparations” in the Operating Instructions contained in

the supplied CD-ROM.

GB

16

You can select the language for displaying

the menu and other on-screen displays. The

factory default setting is English. To change

the current menu language, set the desired

language with the menu screen.

1 Press MENU.

The menu appears.

2 Press M/m to select the Setup

menu, and press , or .

The setting items of the selected menu

appear.

3 Press M/m to select “Language,” and

press , or .

4 Press M/m/</, to select a

language, and press .

The menu changes to the selected

language.

To clear the menu

Press MENU.

Selecting the Menu Language

Step 4

17

GB

1 Turn on both the unit and the

equipment connected to the unit.

2 Press INPUT to display the input

palette on the screen.

3 Select the equipment from which you

want to display images.

Press INPUT repeatedly or press M/m/

(enter) to select the equipment from

which to project.

1 Press the ?/1 (ON/STANDBY)

button.

A message “POWER OFF?” appears on

the screen.

2 Press the ?/1 (ON/STANDBY) button

again before the message disappears.

The ON/STANDBY indicator flashes in

green and the fan continues to run to

reduce the internal heat.

The fan stops and the ON/STANDBY

indicator changes from flashing green to

remaining red.

The power is turned off completely, and you

can disconnect the AC power cord.

Never disconnect the AC power cord while the

indicator is flashing.

You can turn off the unit by holding the ?/1

(ON/STANDBY) button for about 1 second,

instead of performing the above steps.

Projecting

Step 5

Projecting the Picture

Turning Off the Power

Example: To view the picture from the

video equipment connected to the HDMI

1 connector of this unit.

Note

For more information, refer to

“Projecting” in the Operating Instructions

contained in the supplied CD-ROM.

GB

18

Press one of the CALIBRATED PRESET

buttons.

Selecting the Picture Viewing Mode

CALIBRATED

PRESET buttons

Setting items Description

CINEMA FILM 1 Picture quality suited to reproducing the highly dynamic and

clear images typical of master positive film.

CINEMA FILM 2 Picture quality suited to reproducing the rich tone and color

typical of a movie theater.

REF A picture quality setup suitable for when you want to reproduce

faithfully the original image quality, or for enjoying image

quality, without any adjustment.

TV Picture quality suited for watching TV programs, sports,

concerts, etc.

PHOTO Ideal for projecting still images taken with a digital camera.

GAME Picture quality suited to gaming, with well-modulated colors

and fast response.

BRT CINE Picture quality suited for watching movies in a bright

environment, such as a living room.

BRT TV Picture quality suited for watching TV programs, sports,

concerts, and other video images in a bright environment, such

as a living room.

USER Adjusts the picture quality to suit your taste then saves the

setting. The factory default setting is the same as “REF.”

For more information, refer to “Projecting” in the

Operating Instructions contained in the supplied CD-

ROM.

19

GB

The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with

your projector.

When a warning indicator other than the above starts flashing, and the symptom persists even after

carrying out the above methods, consult with qualified Sony personnel.

Error Handling

Warning Indicators

Flashing/Lighting indicators The number of

flashes

Cause and Remedy

Twice Close the lamp cover securely, then tighten

the screws securely.

Close the filter holder securely.

Three times The temperature of lamp is unusually high.

Turn off the power and wait for the lamp to

cool, then turn on the power again.

If the symptom persists, the lamp may be at

the end of its service life. In this case,

replace the lamp with a new one.

Twice The internal temperature is unusually high.

Check to ensure that if nothing is blocking

the ventilation holes or whether or not the

unit is being used at high altitudes.

Three times The fan is broken. Consult with qualified

Sony personnel.

Note

ON/STANDBY

indicator

WARNING

indicator

(Flashes in red)

Both indicators flash

If there is any problem or an error message appears on the

screen, refer to “Troubleshooting” in the Operating

Instructions contained in the supplied CD-ROM.

GB

20

Tools you need to get started:

• Projector Lamp LMP-H210 (optional)

• Standard Phillips screwdriver

• Cloth (for scratch protection)

The lamp used for the light source has a

certain lifespan. When the lamp dims, the

color balance of the picture becomes

strange, or “Please replace the Lamp/Filter.”

appears on the screen, the lamp may be

exhausted. Replace the lamp with a new one

without delay.

Use an LMP-H210 Projector Lamp as the

replacement lamp.

The air filter is supplied with the LMP-H210

Projector Lamp. When you replace the lamp,

it is also time to replace the air filter.

Whenever you replace the lamp, be sure to

replace the air filter with a new one. Also

clean the ventilation holes (intake).

Tip

The lifespan of the lamp used for the light

source changes depending on the installation

environment or use conditions. You can use the

lamp longer by avoiding turning the lamp off

until several minutes pass after turning the

lamp on.

Caution

• The lamp remains hot after the unit is

turned off with the ?/1 (ON/STANDBY)

button. If you touch the lamp, you may

burn your fingers. When you replace the

lamp, wait for at least 1 hour for the lamp

to cool.

• Do not touch the surface of the lamp. If

you touch it, wipe off the fingerprints with

a soft cloth.

• Pay special attention to replacing the lamp

when the unit is installed on the ceiling.

• When removing the lamp unit, make sure

it remains horizontal, then pull straight up.

Do not tilt the lamp unit. If you pull out the

lamp unit while tilted and if the lamp

breaks, the pieces may scatter, causing

injury.

• When you remove the air filter, be careful not

to let any dust fall into the projector.

• Replacing the air filter is crucial to maintain

the good performance of the projector or to

prevent malfunction to it. When a warning

message for replacing the air filter appears,

replace the air filter immediately.

• Be sure to use an LMP-H210 Projector Lamp

for replacement. If you use lamps other than

the LMP-H210, the unit may malfunction.

• Be sure to turn off the unit and unplug the

power cord before replacing the lamp, then

check the ON/STANDBY indicator has

already been turned off.

1 Turn off the projector and unplug the

AC power cord.

2 When setting the projector on a flat

surface such as a desk etc., put a cloth

to prevent the surface from being

scratched. Reverse the projector as

illustrated, then place it on the cloth.

• When the lamp is damaged the broken

pieces of the lamp may become

scattered, if you do not reverse the

projector. This may cause injury.

Maintenance

Replacing the Lamp

Notes

La page charge ...

Sony VPLHW45ES Manuel utilisateur

Ce manuel convient également à

Sony VPLHW45ES Manuel utilisateur

dans d''autres langues

Documents connexes