KitchenAid Dishwasher 8573754 Manuel utilisateur

Catégorie
Lave-vaisselle
Taper
Manuel utilisateur

Ce manuel convient également à

DRAWER DISHWASHER
Use & Care Guide
For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230 or visit our website at
www.kitchenaid.com
In Canada, for assistance, installation or service, call: 1-800-807-6777 or visit our website at www.KitchenAid.ca
LAVE-VAISSELLE DOUBLE TIROIR
Guide d’utilisation et d’entretien
Au Canada, pour assistance, installation ou service composez le 1-800-807-6777 ou visitez notre site web à www.KitchenAid.ca
Table of Contents/Table des matières.............................................................................2
Model/ Modèle KUDD01DPPA
528824/8573754
2
TABLE OF CONTENTS
DISHWASHER SAFETY .................................................................3
PARTS AND FEATURES................................................................4
START-UP GUIDE ..........................................................................5
Using Your New Dishwasher .......................................................5
Wash System ...............................................................................6
Sound System..............................................................................6
Drying System..............................................................................6
DISHWASHER LOADING...............................................................6
Loading Suggestions ...................................................................6
Loading Rack ...............................................................................6
Loading Silverware Basket ..........................................................8
DISHWASHER USE........................................................................9
Detergent Use ..............................................................................9
Rinse Aid Dispenser...................................................................10
Performance Tips.......................................................................10
Wash Cycles...............................................................................11
Canceling a Cycle ......................................................................12
Pausing a Cycle..........................................................................12
Changing a Cycle or Setting ......................................................12
Adding Items During a Cycle .....................................................12
Option Selections and Adjustments ..........................................12
WASHING SPECIAL ITEMS.........................................................14
DISHWASHER CARE ...................................................................15
Cleaning......................................................................................15
Drain Air Gap..............................................................................16
Storing........................................................................................16
TROUBLESHOOTING ..................................................................17
Error Codes ................................................................................19
ASSISTANCE OR SERVICE.........................................................20
In the U.S.A. ...............................................................................20
In Canada ...................................................................................20
WARRANTY ..................................................................................21
TABLE DES MATIÈRES
LA SÉCURITÉ DU LAVE-VAISSELLE .........................................22
PIÈCES ET CARACTÉRISTIQUES ..............................................23
GUIDE DE MISE EN MARCHE ....................................................24
Utilisation de votre nouveau lave-vaisselle................................24
Système de lavage.....................................................................25
Système sonore..........................................................................25
Système de séchage..................................................................25
CHARGEMENT DU LAVE-VAISSELLE .......................................26
Suggestions de chargement......................................................26
Chargement du panier ...............................................................26
Chargement du panier à couverts .............................................29
UTILISATION DU LAVE-VAISSELLE...........................................30
Utilisation du détergent..............................................................30
Distributeur d’agent de rinçage..................................................31
Conseils pour l'efficacité............................................................31
Programmes de lavage ..............................................................32
Annulation d’un programme ......................................................33
Marquer une pause dans le programme ...................................33
Changement d’un programme ou réglage ................................33
Ajout de vaisselle durant un programme...................................33
Sélection des options et ajustements........................................33
LAVAGE D’ARTICLES SPÉCIAUX ..............................................36
ENTRETIEN DU LAVE-VAISSELLE.............................................37
Nettoyage ...................................................................................37
Dispositif anti-refoulement .........................................................38
Remisage....................................................................................38
DÉPANNAGE.................................................................................39
Codes d'erreur............................................................................41
ASSISTANCE OU SERVICE.........................................................42
GARANTIE ....................................................................................43
3
DISHWASHER SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using the dishwasher, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
Read all instructions before using the dishwasher.
Use the dishwasher only for its intended function.
Use only detergents or rinse agents recommended for use
in a dishwasher, and keep them out of the reach of children.
When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
Do not wash plastic items unless they are marked
“dishwasher safe” or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
Do not touch the heating element during or immediately
after use.
Do not operate the dishwasher unless all enclosure panels
are properly in place.
Do not tamper with controls.
Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
Refer to Installation Instructions for instructions pertaining
to grounding.
WARNING
Tip Over Hazard
Do not open dishwasher drawer until inside cabinet opening.
Doing so can result in serious injury.
4
PARTS AND FEATURES
This manual covers several different models. The features on your dishwasher may vary from those shown below.
Control Panels
A. SURE-HOLD
®
medium rack insert
B. SURE-HOLD
®
large rack insert
C. SURE-HOLD
®
base rack
D. SURE-HOLD
®
light item clips
E. Control panel (on drawer front)
F. WHISPER QUIET
®
sound system
G. Model and serial number label
(on the left front edge between drawers)
H.FLEXI-BASKET
silverware basket
I. Fold-down cup shelves
J. Spray arm
K. Control panel (on drawer top edge)
L. Filter plate
M. Drain filter
N. Powdered detergent dispenser
(inside front drawer)
O. Rinse aid dispenser
(inside front drawer)
P. Water inlet (inside front drawer)
H
E
A
V
Y
N
O
R
M
A
L
F
A
S
T
D
E
L
IC
A
T
E
R
IN
S
E
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HI
TEMP
5
START-UP GUIDE
Before using your dishwasher, remove all packaging materials. Read this entire Use and Care Guide. You will find important safety
information and useful operating tips.
NOTE: Each drawer has its own control panel and can run independently of the other.
Using Your New Dishwasher
1. Rinse aid is essential for good drying. Be sure to fill the rinse
aid dispenser before you use your new dishwasher. Each
filling will last about 1 to 2 months depending on your usage.
(See “Rinse Aid Dispenser.”)
2. Scrape large food soil and hard items (toothpicks or bones)
from dishes.
3. Check drain filter and spray arm. (See “Cleaning.”) Ensure the
drain filter is flush with the filter plate, and the spray arm can
rotate about the center easily.
4. Properly load the dishwasher. (See “Dishwasher Loading.”)
Load dishes with space in between so water will reach the
soiled surfaces. Make sure nothing keeps the spray arm(s)
from spinning freely.
5. Add powdered detergent. Always use a high quality brand
detergent. (See “Dishwasher Use.”)
IMPORTANT: Only use powdered detergent recommended
for dishwashers. Do not use liquid or tablet detergents. Wash
performance could be negatively impacted if you use
anything other than powdered detergent.
6. Run hot water at the sink until the water is hot. (See
“Performance Tips.”) Turn off water.
7. Press the Power pad on the front of the drawer to turn the
dishwasher on or off. When the drawer is opened, the
dishwasher will automatically power up for 30 seconds even
if the Power pad has not been pressed. If no program
selection is made, it will power off again.
8. Press the (Cycle Select) or the HI TEMP pad on the top of
the drawer opening to select the desired wash cycle.
Continue to press the (Cycle Select) or the HI TEMP pad, and
the indicators will progress through the different cycles until
the desired cycle is selected. The next time you use the
dishwasher, it will remember the last cycle used. (See “Wash
Cycles.”)
9. Push drawer firmly closed. Press the Start/Resume button on
the front of the drawer to start the wash cycle.
NOTES:
If the dishwasher is operating and a power failure occurs,
it will stop. You may not be able to open the drawer at this
time. When the power supply is resumed, the dishwasher
will start in the same part of the wash cycle.
To end the wash cycle in mid-cycle, press the Power pad.
Any water in the drawer will be pumped out.
10. The dishwasher will beep 6 times to indicate the end of the
wash cycle. At the end of the wash cycle, the drying fan will
continue to run for a set time or until the drawer is opened.
The fan assists with drying and uses small amounts of energy.
NOTE: It is normal for some water to remain in the drain filter
area after the wash cycle is complete.
A. Spray arm
B. Filter plate
C. Drain filter
AB C
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HI
TEMP
6
Wash System
The wash system provides excellent cleaning results. Two levels
of filtration filter the wash water and keep food particles from
redepositing on the clean dishes.
A filter plate keeps bones, pits, and other large objects from
entering the pump system.
Items small enough to pass through the filter plate are caught
in the drain filter.
The wash water continuously flows through the drain filter,
trapping food particles.
IMPORTANT: Before each wash load, check the drain filter for
evidence of food particles and clean. (A small amount of water
will remain in the drain filter area.) Food scraps may collect on the
filter plate, and the spray arm and filter plate may need cleaning.
The spray arm and filter plate may need cleaning about once a
month in normal use or more often, should the need arise. (See
“Cleaning the Spray Arm, Drain Filter and Filter Plate” in
“Cleaning” section.)
Sound System
The WHISPER QUIET
®
sound insulation system helps to maintain
a quiet home environment during dishwasher operation.
NOTE: If you do not load dishes properly, the quiet operation of
your dishwasher could be affected. (See “Dishwasher Loading.”)
Drying System
At the end of the selected wash cycle, the drying fan will continue
to run for a set time or until the drawer is opened. The fan assists
with drying and uses a small amount of energy.
DISHWASHER LOADING
Loading Suggestions
Remove leftover food, bones, toothpicks and other hard
items from the dishes. To conserve water, energy and save
time it is not necessary to rinse dishes before putting them
into the dishwasher.
NOTE: Dishes soiled with tomato-based products should be
prerinsed to avoid staining.
It is important for the water spray to reach all soiled surfaces.
Load dishes so they are not stacked or overlapping if
possible. For best drying, water must be able to drain from all
surfaces.
Use special care when loading heavy pots and pans. Heavy
items can damage the interior of the door if they are dropped
or bumped.
Make sure pot lids and handles, etc., do not interfere with the
spray arm rotation.
Conserve water, energy and save time over hand rinsing by
running a rinse cycle to keep dishes moist if you do not plan
to wash them soon. Foods such as eggs, rice, pasta,
spinach, and cooked cereals may be hard to remove if they
are left to dry over a period of time.
Quiet operating tips
To avoid thumping/clattering noises during operation:
Make sure lightweight load items are secured in the rack.
Make sure pot lids and handles, etc., do not touch interior
walls or interfere with the rotation of the spray arm.
Load dishes so they do not touch one another.
Loading Rack
NOTE: If the rack is incorrectly placed in the drawer, the rack can
block the spray arm rotation. The rack is properly installed if it is
sitting flat on the bottom of the drawer.
The rack is designed for cups, glasses, plates, pans, casseroles
and utensils. Many items, up to 11" (28.38 cm), fit in the rack.
(See recommended loading patterns shown.)
IMPORTANT: Do not load anything above the inside top edge of
the drawer as it may keep the drawer lid from properly closing.
Suggested loading patterns
5 place setting
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HI
TEMP
7
Place items so open ends face down for cleaning and
draining.
China, crystal, and other delicate items must not touch each
other during dishwasher operation. Damage may occur.
Load small items in the rack only if they are secured in place.
Load plastic items so the force of the spray does not move
them during the cycle. Only plastic items marked
“dishwasher safe” are recommended.
To avoid chipping, do not let stemware touch other items.
Small bowls, pans, and other utensils can be placed in the
rack.
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
Load cake pans and other large items at the sides and back.
Loading such items in front can keep the water spray from
reaching the rinse aid dispenser.
Secure heavily soiled cookware face down in the rack.
NOTE: Do not load items between the rack and the detergent
dispenser because they might block the water inlet opening
located at the base of the dispenser.
Fold-Down Cup Shelves
Fold down the cup shelves on the sides of the drawer to hold
additional cups, stemware or long items such as utensils and
spatulas. Fold up when you need room for larger items in the
main rack.
SURE-HOLD
®
light item clips
The light item clips hold lightweight plastic items such as cups,
lids, or bowls in place during washing.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
SURE-HOLD
®
base rack and removable rack inserts
The SURE-HOLD
®
removable rack inserts (see illustration below)
allow you to adjust the rack for the type of load you are washing.
You can remove one or more of the inserts to customize the rack
for a particular load. This is useful when washing a variety of
dishes, pots and pans, or roasters.
NOTE: The removable inserts are not designed to be lifted out of
the drawer while loaded with dishes.
A. Large insert
B. Medium insert
C. Base rack
D. Drain filter access panel
H
E
A
V
Y
N
O
R
M
A
L
A
B
C
D
8
To remove either insert
1. Gently pull in and up on the handle to release the insert
handle from the base rack.
2. Once the handle is lifted up, tilt the insert to the left or right to
release the insert legs on the other end from their position
under the base rack wire.
To install either insert
1. Tilt the rack insert end to the left or right to insert the legs
under the base rack wires as shown below.
2. Straighten the insert into position along the bottom of the
base rack.
3. Gently pull in and push down on the insert handle until the
insert locks into position in the base rack.
Loading Silverware Basket
The FLEXI-BASKET™ silverware basket can be separated and
placed into the rack in several locations. Hold joined basket firmly
and slide each basket until the tab aligns with the keyhole on the
back of each basket and pull apart. Now use both sections or just
one to load silverware.
Load the silverware basket while it is in the rack or take the
basket out for loading on a counter or table. The silverware
basket can be removed for easy unloading.
Use the center section with cover down to load silverware in set
positions and avoid nesting. Mix items in end sections of the
basket with some pointing up and some down to avoid nesting.
Spray cannot reach nested items.
Place small items such as baby bottle caps, jar lids, corncob
holders, etc., in the middle section with the hinged cover. Close
the cover over the section to hold small items in place.
To remove the center basket cover
1. Slide the cover to one side until one hinge end pops out of
the holder.
2. Tilt cover and slide in the opposite direction until the other
hinge end pops out of holder. Remove cover.
1
2
9
To install the center basket cover
1. Insert a cover hinge end into holder on one side.
2. Slide the cover until you can insert the opposite hinge end
into the holder on the other side and slide into place.
IMPORTANT: Always load items (knives, skewers, etc.) pointing
down.
NOTES:
Do not load silver or silver-plated silverware with stainless
steel. These metals can be damaged by contact with each
other during washing.
Some foods (such as salt, vinegar, milk products, fruit juices,
etc.) can pit or corrode silverware. Run a rinse cycle if you do
not have a full load to wash immediately.
Check the bottom of the silverware basket to ensure items
have not come through as they may stop spray arm rotation.
DISHWASHER USE
Detergent Use
The detergent and rinse aid dispenser is located on the front
inside wall of the drawer. The detergent dispenser has two
sections, the pre wash section is the smaller and the other is for
the main wash detergent. The pre wash and main wash sections
both have inside fill line markings. The pre wash section has one
marking which represents 1 tsp (5 mL). When it is full, it holds
2 tsp (10 mL). The main wash section has two markings, the
lowest mark indicates 2 tsp (10 mL), the middle mark 4 tsp
(20 mL), and when it is full it contains 6 tsp (30 mL).
NOTE: The detergent dispenser is designed for use with
powdered detergent. Liquid and tablet detergents are not
suitable to be used in the dispenser. (Posts inside dispenser are a
reminder not to use detergent tablets.)
IMPORTANT:
Use powdered, automatic dishwashing detergent only. Other
detergents can produce excessive suds that can overflow out
of the dishwasher and reduce washing performance.
Add detergent just before starting a cycle.
Store tightly closed detergent in a cool, dry place. Using
fresh, automatic dishwasher detergent results in better
cleaning.
NOTE: Do not use detergent with a rinse cycle.
Filling the powdered detergent dispenser
1. Press the latch down and the door will open.
2. Pour in detergent. No detergent is needed for the Rinse cycle.
3. After filling the section(s), close the dispenser door until it
clicks shut. The detergent will automatically be released into
the drawer during the wash cycle.
How much powdered detergent to use
The detergent quantities suggested in the chart are for
individual drawer use.
The amount of detergent to use depends on the hardness of
your water and the type of detergent. If you use too little,
dishes will not be clean. If you use too much in soft water,
glassware will etch.
Water hardness can change over a period of time. Find out
your water’s hardness by asking your local water department,
water softener company, or county extension agent.
You can order, at no charge, a water hardness test strip. In
the U.S.A., call the Customer eXperience Center and ask for
Part Number 4171690. (See “Assistance or Service.”)
Different brands of dishwasher detergent have different
amounts of phosphorus for softening water. If you have hard
water and use a detergent with a phosphorous content of
less than 8.7%, you might need to use more detergent, or use
a detergent with a phosphorous content higher than 8.7%.
*tsp = teaspoon. 1 tsp = 5 mL.
**No detergent is required in pre wash section for the Quick
Clean and Light/China cycles.
A. Pre Wash section
B. Main Wash section
C. Posts
D. Detergent dispenser latch
E. Rinse aid dispenser plug
F. Rinse aid indicator light
G. Water inlet opening
A
B
C
D
E
F
G
Water Type Wash
Cycles
Detergent
Quantities
Pre
Wash
Main
Wash
Hard
(13 grains per U.S. gallon
or above)
All** 2 tsp*
(10 mL)
6 tsp*
(30 mL)
Medium
(7-12 grains per U.S. gallon)
All** 2 tsp*
(10 mL)
4 tsp*
(20 mL)
Soft
(0-6 grains per U.S. gallon)
Heavy
Normal
Quick
Clean
Light/
China
1 tsp*
(5 mL)
1 tsp*
(5 mL)
3 tsp*
(15 mL)
2 tsp*
(10 mL)
1 tsp*
(5 mL)
1 tsp*
(5 mL)
10
Rinse Aid Dispenser
The regular use of liquid rinse aid gives the best drying results.
Rinse aids keep water from forming droplets that can dry as
spots or streaks. They also help keep metal from tarnishing. They
improve drying by allowing water to drain off of the dishes during
the final rinse. Your dishwasher is designed to use a liquid rinse
aid. Do not use a solid or bar-type rinse aid.
The rinse aid dispenser is located on the front inside of the
drawer underneath the detergent dispenser.
How much rinse aid to use
The regulator may need adjusting to suit your water conditions.
The lowest setting is “1” and the highest is “5.” For hard water,
the rinse aid dispenser should be used with its setting fixed at 5.
(See “Option Selections and Adjustments” section.)
NOTE: If there is excessive foam at the end of the wash, reduce
the rinse aid dispenser setting. If dishes are wet or streaky after
drying, increase the rinse aid dispenser setting.
Filling the rinse aid dispenser
The rinse aid dispenser holds 1.7 oz (50.28 mL) of rinse aid.
Under normal conditions, this will last for about 1 to 2 months.
Try to keep it full, but be sure not to overfill it.
1. Turn the plug counterclockwise and remove.
2. Pour the rinse aid into the circular opening.
3. Take care not to spill rinse aid into the drawer. Any spills must
be wiped up to avoid excess foaming.
4. Fit the plug back into the original position.
Rinse Aid indicator
If the rinse aid indicator light is red, refill the dispenser. If the rinse
aid indicator light is not lit, there is enough rinse aid for the wash.
You do not have to wait until the dispenser is empty to refill.
Performance Tips
Hot water dissolves and activates the dishwashing detergent.
Hot water also dissolves grease on dishes and helps glasses dry
spot-free. For best dishwashing results, water should be 120°F
(49°C) as it enters the dishwasher. Loads may not wash as well if
the water temperature is too low. Water that is too hot can make
some soils harder to remove and cause certain detergent
ingredients not to function. If your water heater is located far from
the dishwasher, it may be necessary to run the hot water at the
faucet closest to the dishwasher to minimize the amount of cold
water in the water line.
To check water temperature
1. Run hot water at the faucet closest to your dishwasher for at
least 1 minute.
2. Place a candy or meat thermometer in a glass measuring
cup.
3. Check the temperature on the thermometer as the water is
running into the cup.
Additional efficiency tips
To save water, energy and time, do not rinse dishes before
putting them into the dishwasher.
Choose the cycle that describes the most difficult soil on your
dish load.
Do not worry about mixed loads. Any item that is dishwasher
safe can be washed using any cycle. (SeeNOTES: in the
“Loading Silverware Basket” section.)
Use a delay feature to run your dishwasher during off-peak
hours. Local utilities recommend avoiding heavy usage of
energy at certain times of day. (See “Option Selections and
Adjustments.”)
Use a rinse aid to improve drying.
Use cycles or options that add extra heat to the wash or rinse
portion of the cycle for better performance.
Run your dishwasher with full loads. Run a rinse cycle after
meals until the dishwasher is full.
If your home is equipped with a water softener, you may want
to avoid starting the dishwasher during the regeneration of
the softener, since this may contribute to poor wash
performance.
A. Rinse aid plug
B. Rinse aid indicator light
C. Rinse aid dispenser
A
B
C
11
Wash Cycles
Select the wash cycle desired. The indicator is lit above the selected cycle. Press the Start/Resume button.
This model meets the ENERGY STAR
®
guidelines for energy efficiency.
NOTE: Please refer to “Detergent Use” for recommended detergent dispenser sections and powdered detergent amounts to use.
NOTE: Wash times can vary depending on the incoming water temperature, type of dish load, and whether the drawer has been
opened during the wash.
Standard Cycles - when to use
(These cycles use less energy and time.)
Heavy Normal Quick Clean Light/China Rinse
Use this cycle for heavily
soiled, everyday dishes.
Use this cycle for normally
soiled dishes for optimum
energy use.
Use this cycle for a quick
wash and light dry to clean
up cookware prior to
entertaining. This cycle
uses a shortened dry time.
Towel drying may be
needed.
Use this cycle for china and
crystal. This cycle uses a
gentle light wash and gentle
dry.
Use this rinse
cycle for rinsing
dishes, glasses,
and silverware
that will not be
washed right
away.
Pre Wash 1
Pre Wash 2
Main Wash 149°F (65°C)
Rinse 1
Rinse 2
Final Rinse 149°F (65°C)
Dry
Pre Wash
Main Wash 131ºF (55°C)
Rinse
Final Rinse 131ºF (55°C)
Dry
Main Wash 113ºF (45°C)
Rinse
Final Rinse 113ºF (45°C)
Pre Wash
Main Wash 113ºF (45°C)
Rinse
Final Rinse 122º F (50°C)
Dry
Pre Wash
cycle description
Hi Temp Wash Cycles - when to use
(The red indicator is lit when this cycle is selected.)
Heavy Normal Quick Clean Light/China Rinse
Use this cycle for heavily
soiled, everyday dishes and
hard-to-clean cookware.
Use this cycle for normally
soiled dishes for optimum
wash and dry performance.
Use this cycle for a quick
wash and light dry for lightly
soiled dishes. Towel drying
may be needed.
Use this cycle for lightly
soiled china and crystal.
This cycle uses a gentle
light wash and gentle dry.
Use this rinse
cycle for rinsing
dishes, glasses,
and silverware
that will not be
washed right
away.
Pre Wash 1
Pre Wash 2
Pre Wash 3
Main Wash 149°F (65°C)
Rinse 1
Rinse 2
Final Rinse 163°F (73°C)
Dry
Pre Wash 1
Pre Wash 2
Main Wash 144ºF (62°C)
Rinse
Final Rinse 140ºF (60°C)
Dry
Pre Wash
Main Wash 131ºF (55°C)
Rinse
Final Rinse 122ºF (50°C)
Pre Wash
Main Wash 122ºF (50°C)
Rinse
Final Rinse 131º F (55°C)
Dry
Pre Wash
HI
TEMP
cycle description
12
Canceling a Cycle
To end a wash cycle in mid-cycle, press the Power button.
Any water in the drawer will be pumped out.
Pausing a Cycle
To pause the drawer during its wash cycle, press START/
RESUME and wait for 3 beeps before opening.
Restart by pressing START/RESUME.
IMPORTANT: Forcing the drawer open in mid-cycle may cause
damage to the dishwasher.
NOTE: If the drawer is operating and a power failure occurs, it
will stop. The drawer may not be opened during this time. When
the power supply resumes, the drawer will restart in the same
part of the wash cycle.
Changing a Cycle or Setting
1. Press the Power button to end the current cycle. Wait for the
drawer to drain.
2. When the draining stops, open the drawer.
3. Press the desired wash cycle button to select the desired
wash cycle. The lighted indicators will progress until the
desired cycle is selected.
4. Check the detergent dispensers. They must be filled properly
for the new cycle. (See “Detergent Use.”)
5. Close the drawer.
6. Press START/RESUME.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open
the drawer and check the detergent amount. If the detergent is
still visible, you can add items.
To add items
1. Press START/RESUME and wait for 3 beeps before opening
the drawer.
2. If the detergent is still visible in the detergent dispenser, you
may add the item.
3. Close the drawer firmly.
4. Restart by pressing START/RESUME.
IMPORTANT: Forcing the drawer open in mid-cycle may cause
damage to the dishwasher.
Option Selections and Adjustments
After using the dishwasher, you may want to use or adjust some
of the preset options available to suit your needs. You can select
the Lock button, Control lock, Keylock or Delay Start mode. You
can adjust the settings for Rinse Aid, Auto Power, and End of
Wash Program beeps.
NOTE: Indicator light colors vary depending on your dishwasher.
See following descriptions.
Lock button
The Lock button activates/deactivates the Control lock or the
Keylock functions.
Use the Lock button to prevent unintended use of the
dishwasher. You can also use either of the lock options to prevent
unintended cycle or option changes during a wash cycle.
Control lock
The Control lock feature disables all of the buttons on the
dishwasher.
1. To activate, press and hold the Lock button until you hear
1 beep (about 3 seconds).
2. To cancel, press and hold the Lock button until the light
disappears.
Keylock
The Keylock feature locks the drawer closed and disables the
dishwasher and all buttons.
1. To activate, press and hold the Lock button until you hear
the 2 beeps (about 5 seconds).
2. To cancel, press and hold the Lock button until the light
disappears.
OR
HI
TEMP
13
Delay Start mode
The start of the selected wash cycle can be delayed from 1 to
12 hours.
To activate the Delay Start
1. Press and hold the Start/Resume button until the light above
turns orange or lavender depending on model.
2. The dishwasher will beep as you hold down the button. Each
“beep” represents an hour delay, so for each beep while the
button is pressed an additional hour delay will be
programmed until the desired delay time is reached.
3. Make sure the drawer is closed.
4. The dishwasher will start after the set delay time has elapsed.
To cancel the Delay Start
1. Press the Power button to turn off the dishwasher or hold the
Start/Resume button until the light turns green or blue
(depending on model).
To enter the Option Adjustment Mode
1. Press the Power button to turn the dishwasher to the Normal
Operating Mode.
2. Press and hold the HI TEMP and Lock buttons at the same
time for 5 seconds. When the buttons have been correctly
pressed, one long beep is sounded and the Start/Resume
light is red.
3. Release the HI TEMP and lock buttons.
4. Use the appropriate buttons on the control panel to make the
necessary adjustments. These are explained below.
5. Once the changes have been made, press the Power button
to return to the Normal Operating Mode.
NOTE: The dishwasher automatically saves these changes.
To adjust the Rinse Aid setting
NOTE: If there is excessive foam at the end of the wash, reduce
the rinse aid dispenser setting. If dishes are wet or streaky after
drying, increase the rinse aid dispenser setting. (See “How much
rinse aid to use” in “Rinse Aid Dispenser” section.)
1. Enter the Option Adjustment Mode as explained above. The
light above the Start/Resume button is red to indicate this
setting has been chosen.
2. The current Rinse Aid setting is shown on the wash cycle
indicator panel. The number of red lights lit on the panel
shows what the current rinse aid setting is. For example, if
4 red lights are lit on the panel, then the Rinse Aid setting is
at 4.
3. Press the Lock button to increase or decrease the Rinse Aid
setting, the red lights will scroll up to 5 and then start from
1again.
4. Once you have selected the desired Rinse Aid setting, press
the Power button to return to the Normal Operating Mode.
To remove the Auto Power setting
When the dishwasher leaves the factory, it is programmed to
automatically power up whenever the drawer is opened even if
the Power pad has not been pressed. The dishwasher will not
start washing until the drawer is closed and the Start/Resume
button has been pressed. If you do not want the dishwasher to
automatically power up, this feature can be turned off.
1. Enter the Option Adjustment Mode as explained at the
beginning of this section.
2. Press the Start/Resume button until the light above is orange
or lavender (depending on model), and the light above the
HI TEMP button is red. If it is not, press the Power button to
return to Normal Operating Mode and start again.
3. Press the Lock button to turn the Auto Power feature on or
off. If all the red lights on the wash cycle panel are off, then
the Auto Power feature has been turned off.
4. Press the Power button to return to the Normal Operating
Mode.
OR
Power button Start/Resume button
Example of Rinse Aid setting at 4
Auto Power On
Auto Power Off
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
14
To remove the End of Wash cycle beeps
The factory has programmed the dishwasher to beep 6 times at
the end of the selected wash cycle. This feature can be turned
off.
1. Enter the Option Adjustment Mode as explained at the
beginning of this section.
2. Press the Start/Resume button until the light above is green
or blue (depending on model), and the HI TEMP light is red. If
it is not, press POWER to start again.
3. Press the Lock button to turn the “End of Wash” cycle beeps
on or off as desired. The “End of Wash” cycle beeps have
been turned off if all the red lights on the wash cycle panel are
off.
4. Press the Power button to return to the Normal Operating
Mode.
WASHING SPECIAL ITEMS
If you have doubts about washing a particular item, check with the manufacturer to see if it is dishwasher safe.
Beeps On
Beeps Off
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
Material Dishwasher Safe?/Comments
Aluminum Yes
High water temperature and detergents
can affect finish of anodized aluminum.
Disposable
Aluminum
No
Do not wash throwaway aluminum pans
in the dishwasher. These might shift
during washing and transfer black marks
to dishes and other items.
Bottles and Cans No
Wash bottles and cans by hand. Labels
attached with glue can loosen and clog
the spray arms or pump and reduce
washing performance.
Cast Iron No
Seasoning will be removed, and iron
will rust.
China/
Stoneware
Yes
Always check manufacturer’s
recommendations before washing.
Antique, hand-painted, or over-the-glaze
patterns may fade. Gold leaf can discolor
or fade.
Crystal Yes
Always check manufacturer’s
recommendations before washing. Some
types of leaded crystal can etch with
repeated washing.
Gold No
Gold-colored flatware will discolor.
Glass Yes
Milk glass yellows with repeated
dishwasher washing.
Material Dishwasher Safe?/Comments
Hollow-Handle
Knives
No
Handles of some knives are attached to
the blade with adhesives which can
loosen if washed in the dishwasher.
Pewter, Brass,
Bronze
No
High water temperatures and detergent
can discolor or pit the finish.
Disposable
Plastics
No
Cannot withstand high water
temperatures and detergents.
Plastics Yes
Always check manufacturer’s
recommendations before washing.
Plastics vary in their capacity to
withstand high temperatures and
detergents.
Stainless Steel Yes
Run a rinse cycle if not washing
immediately. Prolonged contact with
food containing salt, vinegar, milk
products, or fruit juice can damage
finish.
Sterling Silver or
Silver Plate
Yes
Run a rinse cycle if not washing
immediately. Prolonged contact with
food containing salt, acid, or sulfide
(eggs, mayonnaise, and seafood) can
damage finish.
Tin No
Can rust.
Wooden Ware No
Wash by hand. Always check
manufacturer’s instructions before
washing. Untreated wood can warp,
crack, or lose its finish.
15
DISHWASHER CARE
Cleaning
Cleaning the exterior
In most cases, regular use of a soft, damp cloth or sponge and a
mild detergent is all that is necessary to keep the outside of your
dishwasher looking nice and clean. Dry with a clean, lint-free
cloth.
Cleaning the interior
Hard water minerals can cause a white film to build up on the
inside surfaces.
Do not clean the dishwasher interior until it has cooled. You may
want to wear rubber gloves. Do not use any type of cleanser
other than dishwasher detergent because it may cause foaming
or sudsing.
To clean interior
Make a paste with powdered dishwasher detergent on a damp
sponge and clean.
OR
See the vinegar rinse procedure in “Spotting and filming on
dishes” in “Troubleshooting.”
NOTE: Run a Normal cycle with detergent after cleaning the
interior.
Cleaning the Spray Arm, Drain Filter and Filter Plate
To clean the Spray Arm
1. Gently remove the base rack. Lift from the back end first so
that you do not bump the detergent and rinse aid dispenser.
2. Lift the spray arm and shake out any foreign material.
3. Rinse the spray arm under running water and wipe it with a
damp cloth.
4. Place the spray arm back onto the impeller.
To clean the Drain Filter
1. If the base rack is in place, lift up the drain filter access panel
located under the silverware basket.
2. Lift and remove the drain filter out of the drawer.
3. Empty the drain filter, rinse under clean running water, and
place back into the drain space.
4. Make sure that the drain filter is flush with the filter plate.
To clean the Filter Plate
1. Make sure that the dishwasher is cool before you start
cleaning the filter plate and follow the instructions for
removing the spray arm and drain filter.
2. In the center of the filter plate, there are two rings — an outer
ring and a center ring. Hold the center ring still and turn the
outer ring counterclockwise, ¹⁄₈ turn, until the tabs and
notches in both rings align. This will release the filter plate.
3. Lift up the filter plate. Remove any soil, wash in hot soapy
water, and rinse thoroughly in clean water. The bottom of the
drawer can be wiped with a damp cloth.
4. Replace the filter plate so that it lies flat in the base of the
drawer.
5. Align the outer ring making sure that the tabs align with the
notches in the center ring.
6. To lock the filter plate into position, hold the center ring while
you turn the outer ring clockwise until the lines on the two
rings align. (See illustration above.)
7. When properly installed, you should not be able to move the
filter plate.
IMPORTANT: For best performance, the drawer must be used
with the filter plate, drain filter, and spray arm correctly in place.
A. Spray arm
B. Drain filter
C. Outer ring
D. Filter plate
E. Center ring
F. Impeller
A
B
C
D
E
F
A. Impeller
B. Center ring
C. Outer ring
Correct locking position of Filter Plate with motor assembly
A
B
C
16
Drain Air Gap
Check the drain air gap anytime your dishwasher isn’t draining
well.
Some state or local plumbing codes require the addition of a
drain air gap between a built-in dishwasher and the home drain
system. If a drain is clogged, the drain air gap protects your
dishwasher from water backing up into it.
The drain air gap is usually located on top of the sink or
countertop near the dishwasher. To order a drain air gap, call your
local dealer; or call us or your designated service center and ask
for Part Number 300096. For more information, see “Assistance
or Service.”
NOTE: The drain air gap is an external plumbing device that is
not part of your dishwasher. The warranty provided with your
dishwasher does not cover service costs directly associated with
the cleaning or repair of the external drain air gap.
To clean the drain air gap
Clean the drain air gap periodically to ensure proper drainage of
your dishwasher. Follow the cleaning instructions provided by the
manufacturer. With most types, you lift off the chrome cover.
Unscrew the plastic cap. Then check for any soil buildup. Clean if
necessary.
Storing
Storing for the summer
Protect your dishwasher during the summer months by turning
off the water supply and power supply to the dishwasher.
Winterizing your dishwasher
Protect your dishwasher and home against water damage due to
freezing water lines. If your dishwasher is left in a seasonal
dwelling or could be exposed to near freezing temperatures, have
your dishwasher winterized by authorized service personnel.
17
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid the cost of a service call...
Dishwasher is not operating properly
Dishwasher does not run or stops during a cycle
Is the drawer closed tightly?
Is the correct wash cycle selected? Refer to“Wash Cycles.”
Is there power to the dishwasher? Has a household fuse
blown, or has a circuit breaker tripped? Replace the fuse or
reset the circuit breaker. If the problem continues, call an
electrician.
Is an Error Code indicated? (See “Error Codes.”)
Dishwasher will not fill
Is the water shut-off valve (if installed) turned on?
Dishwasher seems to run too long
Is the water supplied to the dishwasher hot enough? The
drawer runs longer while heating water. Refer to the
“Performance Tips” section.
A delay automatically occurs in some wash and rinse cycles
until the water reaches the proper temperature.
Water remains in the dishwasher
Is the cycle complete? A small amount of water will remain in
the drain filter area.
Excess water in the dishwasher
Are there blocked drain filters? Clean the drain filter and filter
plate. (See “Cleaning.”)
Is the drain hose bent or kinked? Straighten or unblock
hoses. (See “Error Codes.”)
Odor in the dishwasher
Are dishes washed only every 2 or 3 days? Run a rinse cycle
once or twice a day until you have a full load.
Does the drawer have a new plastic smell? Run a vinegar
rinse as described in “Spotting and filming on dishes.”
Dishes are not completely clean
Food soil left on the dishes
Is the dishwasher loaded correctly? If not, it can block
rotation of the spray arm. Refer to the “Dishwasher Loading”
section.
Can the spray arm rotate freely? Check that no items are
obstructing the spray arm path.
Are the spray arm holes blocked? Clean the spray arm. See
“Cleaning the Spray Arm, Drain Filter and Filter Plate” in
“Cleaning” section.
Are the drain filter and filter plate clean and installed
correctly? See “Cleaning the Spray Arm, Drain Filter and Filter
Plate” in “Cleaning” section.
Is the base rack correctly installed? Refer to “Loading Rack.”
Is the water temperature too low? For best dishwashing
results, water should be 120°F (49°C) as it enters the
dishwasher. Refer to the “Performance Tips” section.
Is the correct cycle selected? Refer to “Wash Cycles.”
Did you use the correct amount of fresh detergent? Use
recommended dishwasher detergents only. Refer to the
“Detergent Use” section. Do not use less than 1 tsp (5 mL)
per load. Detergent must be fresh to be effective. Store
detergent in a cool, dry area. Heavy soil and/or hard water
generally require extra detergent.
Is the pump or spray arm clogged by labels from bottles and
cans?
Is the home water pressure high enough for proper
dishwasher filling? Home water pressure should be 20 to
120 psi (138 to 828 kPa) for proper dishwasher fill. If you have
questions about your water pressure, call a licensed, qualified
plumber.
Are high suds slowing the wash arm? Do not use soap or
laundry detergents. Use recommended powdered
dishwasher detergents only.
Spots and stains on dishes
Spotting and filming on dishes
Is your water hard or is there a high mineral content in your
water? Conditioning the final rinse water with a liquid rinse
aid helps eliminate spotting and filming. Keep the rinse aid
dispenser filled.
Is the water temperature too low? For best dishwashing
results, water should be 120°F (49°C) as it enters the
dishwasher. Refer to the “Performance Tips” section.
Did you use the correct amount of effective detergent? Use
recommended powdered dishwasher detergents only. Refer
to the “Detergent Use” section. Do not use less than 1 tsp
(5 mL) per load. Detergent must be fresh to be effective. Store
detergent in a cool, dry area. Heavy soil and/or hard water
generally require extra detergent.
Is the home water pressure high enough for proper
dishwasher filling? Home water pressure should be 20 to
120 psi (138 to 828 kPa) for proper drawer fill. If you have
questions about your water pressure, call a licensed, qualified
plumber.
NOTE: To remove spots and film from dishes, try a white
vinegar rinse. This procedure is intended for occasional use
only. Vinegar is an acid and using it too often could damage
your drawer.
1. Wash and rinse dishes. Remove all silverware or metal
items.
2. Put 1 cup (250 mL) white vinegar in a glass or
dishwasher-safe measuring cup on the rack.
3. Run the dishwasher through a complete washing cycle.
Do not use detergent. Vinegar will mix with the wash
water.
18
Silica film or etching (silica film is a milky, rainbow-
colored deposit; etching is a cloudy film)
Sometimes there is a water/chemical reaction with certain
types of glassware. This is usually caused by some
combination of soft or softened water, alkaline washing
solutions, insufficient rinsing, overloading the drawer, and the
heat of drying. It might not be possible to avoid the problem,
except by hand washing.
To slow this process use a minimum amount of powdered
detergent but not less than 1 tsp (5 mL) per load. Use a liquid
rinse aid and underload the drawer to allow thorough rinsing.
Silica film and etching are permanent and cannot be
removed.
White spots on cookware with nonstick finish
Has the dishwasher detergent removed cookware
seasoning? Reseason cookware after washing in the drawer.
Brown stains on dishes and drawer interior
Does your water have high iron content? Rewash dishes
using 1-3 tsp (5-15 mL) of citric acid crystals added to the
detergent dispenser main wash section. Do not use
detergent. Follow with a Normal wash cycle with detergent. If
treatment is needed more often than every other month, the
installation of an iron removal unit is recommended.
Black or gray marks on dishes
Are aluminum items rubbing dishes during washing?
Disposable aluminum items can break down in the
dishwasher and cause marking. Hand wash these items.
Remove aluminum markings by using a mild abrasive cleaner.
Orange stains on plastic dishes or dishwasher interior
Are large amounts of tomato-based foods on dishes placed
in the dishwasher? It may be necessary to use a stain
removal product to remove stains from your dishwasher.
Stains will not affect dishwasher performance.
Dishes do not dry completely
Dishes are not dry
Did you load your drawer to allow proper water drainage? Do
not overload. Refer to the “Dishwasher Loading” section. Use
a liquid rinse aid to speed drying. You may need to adjust the
Rinse Aid setting. (See “Option Selections and Adjustments.”)
Are the plastics wet? Plastics often need towel drying.
Is the rinse aid dispenser empty? Refer to the “Rinse Aid
Dispenser” section.
Dishes are damaged during a cycle
Chipping of dishes
Did you load the dishwasher properly? Load the dishes and
glasses so they are stable and do not strike together from
washing action.
NOTE: Antiques, feather-edged crystal, and similar types of
china and glassware might be too delicate for automatic
dishwashing. Wash by hand.
Excessive pump noise
Are the filter plate and/or spray arm correctly placed?
Is there water in the pump area? It is normal during first use
or after the dishwasher has not been used for long periods of
time. Run the drawer through a wash cycle.
Water leaking
Is the drain hose disconnected from a waste pipe?
Reconnect the drain hose to the waste pipe.
Is the supply inlet hose correctly connected? Make sure that
the inlet hose is connected securely.
Are there other leaks? Turn off water and power supplies to
the dishwasher. Contact an authorized service agent. (See
“Assistance or Service.”)
Dishwasher will not open
Is the Keylock option selected? Turn Lock off. Hold down the
Lock button until the green light disappears and/or press the
Power button to open the drawer. Refer to “Option Selections
and Adjustments.”
Intermittent beeping
The dishwasher is in a pause mode. Close the drawer and
press the Start/Resume button.
Continuous beeping
A failure has occurred. (See “Error Codes.”)
19
Error Codes
How to recognize an Error Code
When a failure has occurred, the dishwasher will continuously beep every second and the Start/Resume indicator light will be red. The
error code will be displayed with the red light indicators on the wash cycle panel. (For specific failures see the illustrations below.)
To solve a failure issue
1. Press the Power button to remove the error code.
2. If the error code and continuous beeps cannot be removed by pressing POWER, turn the power off at the power supply.
3. Check the chart below and correct the failure wherever possible.
4. After attending to the failure, turn the dishwasher on at the power supply.
5. If the error code and continuous beeps remain, turn the water and power supply off to the dishwasher.
6. Call your authorized service center. (See “Assistance or Service.”) Advise the technician of the error code that has appeared on the
dishwasher.
If you have any questions about operating the product, please contact the Customer eXperience Center. (See “Assistance or Service.”)
Error Codes Possible Causes What to do
Flood switch has been activated. Turn the water and power supply to the
dishwasher off and call your authorized
service center.
Motor problem. Call your authorized service center.
Temperature sensor failed. Make sure that water going in through the
inlet hose is not hotter than 149ºF (65°C).
(Refer to “To check water temperature” in
the “Performance Tips” section.)
Call your authorized service center.
Temperature sensor or element failure. Call your authorized service center.
Electronics malfunction. Call your authorized service center.
Fill failure.
Turn on the dishwasher water supply.
Make sure the spray arm can rotate
around the center. If the dishwasher is
full of water, it will need to be emptied
manually.
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
HEAVY
NORMAL
QUICK
CLEAN
LIGHT/
CHINA
RINSE
20
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
use only factory-specified parts. These parts will fit right and
work right, because they are made with the same precision used
to build every new KITCHENAID
®
appliance.
To locate factory-specified parts in your area, call us or your
nearest designated service center.
In the U.S.A.
Call the KitchenAid Customer eXperience Center
toll free: 1-800-422-1230.
Our consultants provide assistance with:
Features and specifications on our full line of appliances.
Installation information.
Use and maintenance procedures.
Accessory and repair parts sales.
Specialized customer assistance (Spanish-speaking,
hearing-impaired, limited-vision, etc.).
Referrals to local dealers, repair parts distributors, and
service companies. KitchenAid designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in the United States.
To locate the KitchenAid designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to us with any
questions or concerns at:
KitchenAid Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
In Canada
Call the KitchenAid Canada Customer Interaction Centre toll free:
1-800-807-6777.
Our consultants provide assistance with:
Features and specifications on our full line of appliances.
Warranty information.
Use and maintenance procedures.
Accessory and repair parts sales.
Referrals to local dealers, repair parts distributors, and
service companies. KitchenAid designated service
technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to us with any
questions or concerns at:
KitchenAid Canada
Customer Interaction Centre
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

KitchenAid Dishwasher 8573754 Manuel utilisateur

Catégorie
Lave-vaisselle
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues