LG HBS-FN6 Manuel utilisateur

Rev 1.0 EU

HBS-FN6 / HBS-FN5W /

HBS-FN4

www.lg.com

USER MANUAL

Bluetooth® LG Stereo Headset

Google Play App Store

English

Français

Deutsch

Italiano

Español

Using LG TONE Free™

Utilisation du LG TONE Free™

LG TONE Free™ verwenden

Utilizzo di LG TONE Free™

Uso de LG TONE Free™

Contact ofce for compliance of this product :

LG Electronics Inc.

EU Representative, Krijgsman 1, 1186 DM Amstelveen, The Netherlands

Using LG TONE Free™

1

ENGLISH

NOTE: For the best performance and to prevent any damage to, or misuse of the headset, please read all

of the information carefully prior to using the headset.

Any modications or changes to this manual due to typographical errors or inaccuracies of stated

information shall only be made by LG Electronics Inc.

The LG TONE Free (HBS-FN6 / HBS-FN5W / HBS-FN4) is a lightweight wireless headset that uses

Bluetooth technology.

This product can be used as an audio accessory for devices supporting either the A2DP or Hands-Free

Bluetooth Prole.

Safety Cautions

!

CAUTION

Do not disassemble, adjust, or repair the product arbitrarily.

Do not place the product near excessive heat or ammable material.

The product may be damaged if an incompatible charger is used.

Make sure that an infant or child does not swallow a magnet or a small component of the product.

Make sure that foreign objects do not enter the charger’s connectors (charging port and power plug).

Failure to do so may result in re or electric shock.

If you have a medical device implanted, contact your doctor before using this device.

This product has a built-in battery, and the battery cannot be removed or replaced arbitrarily.

For your safety, do not remove the battery incorporated in the product.

If you arbitrarily replace the battery or don’t replace it correctly, it may explode.

The lithium-ion battery is a hazardous component that can cause injury.

Battery replacement by an unqualied professional can cause damage to your device.

Do not replace the battery by yourself. The battery can be damaged, which can cause overheat and

injury. The battery must be replaced by authorized service provider. The battery should be recycled or

disposed separately from household wastes.

2

Do not discard the battery arbitrarily. Follow the local procedure for discarding batteries.

In order to prevent unnecessary energy consumption, disconnect the device when fully charged.

Always use an easily accessible power outlet for charging your device.

Disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can

result in an explosion;

A battery subjected to extremely low air pressure that may result in an explosion or the leakage of

ammable liquid or gas.

!

WARNING

Do not drop the product from a high place.

Make sure there is no water, alcohol, or benzene in contact with the product.

Do not store the product in a wet or dusty place.

Do not place heavy objects on the product.

This product is waterproof to the IPx4 level (daily life waterproof).

(The IPx4 waterproof rating applies to the earbud product only.)

Do not put the product under the water or use it in a humid location such as a bathroom.

!

NOTE

If the product is exposed to excessive sweat, clean the product.

Keep the earbuds clean.

HD Speaker

If the communication network of the device you are connecting to supports HD Voice Calling, you

can enjoy making voice calls and listening to music in high denition.

3

Product Components

LG TONE Free™

Earbuds (medium eargels installed)

UV Charging Case

Extra Ear Gels

(small & large)

USB Type C™ Charging Cable

Reference guide User Manual WEEE Card (Europe Only)

NOTE: Actual product design may differ from images shown in manual.

Make sure authentic LG Electronics components are used. Using a non-authentic component may

damage the product and thus void the warranty.

Use the USB Type C™ cable provided with the product.

!CAUTION

4

Product Description

Charging Case

Earbuds

*The appearance and specications of the actual product may differ depending on the model.

NOTE: HBS-FN4 does not have a UV-C LED and mood light.

UV-C LED

Pairing / Battery check button

Charging port

Charging terminals

Status indicator light

Mood light

(When you open the charging case,

the mood light turns on and off.)

UV-C LED

Speaker mesh

Microphone

Touchpad

Charging terminals

Speaker mesh

5

Pairing and Connecting

Initial Pairing

Open the charging case lid.

With the earbuds mounted on the charging case, plug a

type C™ cable into the charging port of the charging case

and connect it to a power source*.

The earbuds enter pairing mode (The blue LED on the

charging case blinks).

* You need to plug a cable into the charging port and

connect it to a power source only for the initial pairing.

Fast Pair

-(

#MVFUPPUI 0/

1 Activate Bluetooth on your phone or device.

2 While the earbud is mounted in the charging case, open the charging case lid and press the

pairing button for 3 to 5 seconds until the blue indicator light blinks.

-(

-()#4'/

-(

-()#4'/

#MVFUPPUI

3 When the Fast Pair connection pop-up appears on the top area of the mobile phone screen,

tap it to connect. (It only supports Android™ 5.0 or higher, and requires conguring Bluetooth and

location information settings of the mobile device.)

~39 inch, ~1m

6

4 If the pop-up does not appear, select [LG HBS-FN6] from the Bluetooth menu on the mobile

phone and connect it (for users of iOS or Android 5.0 or lower versions).

NOTE: To connect with another device, perform the above procedure again.

CAUTION: In the list of Bluetooth connected devices, LG HBS-FN6_LE is not the correct model

name for connection. Check the model name in use and connect with the model name

without “LE”.

Automatic Reconnection

The earbuds are connected automatically when you open the cover of the charging case. If you close

the cover of the charging case with both earbuds mounted in the charging case, the earbuds are

disconnected.

How to wear earbuds

2

1

3

Separate the earbuds from the charging case and adjust them so that they t comfortably in your

ears. When you wear the earbuds, you will hear a wearing detection alarm.

NOTE: You can easily separate the earbuds from the charging case by turning the part with dotted line

in Image 1 to left or right and lifting the earbuds.

7

Indicator Light

Status Description

Bluetooth Search Mode The blue status indicator light blinks.

Battery below 20% The red status indicator light turns on and off.

Battery 20% - 80% The purple status indicator light turns on and off.

Battery 80% or more The blue status indicator light turns on and off.

When there is a problem while charging The red status indicator light blinks.

When the UVnano function is operating The status indicator light blinks slowly during the UV-C LED

operation.

Mobile Calling Functions

Function Status Description

Answering Calls Ringing Touch the left or right earbud once.

Ending Calls Talking Touch the left or right earbud twice.

Making Calls Idle If you make a call using a mobile phone, the call is automatically

connected to the headset.

Receiving Calls

while on the

Phone

Talking

If you touch the left or right earbud once, the current call will go

on hold, and you will be able to answer an incoming call.

If the previous call is on hold, you can nish the current call on

the mobile phone.

(It works differently depending on the mobile phone settings.)

Rejecting Calls Ringing Touch and hold the left or right earbud.

8

Playing Music

-(

Function Description

Play / Pause : Touch the left or right earbud once.

Adjusting the Volume : Touch the left(Decrease volume) or right(Increase volume)

earbud twice.

Play Next : Touch the left or right earbud three times.

NOTE: On the LG TONE Free app, you can switch the operation mode through the touchpad settings.

Listening to the ambient sound

Touch and hold the left or right earbud to hear the ambient sound.

You can adjust the intensity of the ambient sound in the LG TONE Free app.

The Listen to the Ambient Sound function works only when the product is on hold or playing music.

While using the listen to the ambient sound function, the battery discharges faster than usual.

CAUTION: When the Listen to the Ambient Sound mode is enabled, you may hear the ambient sound

become loud suddenly.

9

Battery Status

If the earbuds are mounted in the charging case while plugged in, the UVnano process will commence

for ten minutes.

Once this process is complete, the charging case's battery status will be displayed.

Indicator Light Battery Status

Red Below 20% battery

Violet Between 20% and 80% battery

Blue Above 80% battery

NOTE: When the charging case lid is closed, charging case battery

status is displayed. If the charging case has no remaining charge,

there will be no display and it cannot function. We recommend

you keep the charging case charged at all times as the earbuds

are not able to be turned on and turned off independently.

10

How to charge

Wired Charging

When the charging cable is connected, the charging status is displayed in the charging case.

NOTE: The earbuds and the charging case are charged at the same time.

Wireless Charging

Align the bottom center of the charging case with the center of the wireless charger.

NOTE: The wireless charger is not provided. HBS-FN4 does not support wireless charging. Fast

charging feature does not apply when charging case is placed on wireless charging device

such as a pad. Wireless charging feature charges at a slower rate due to less power being

transmitted to the charging case.

11

UVnano Description

UV-C LED process operates for ten minutes and begins when

charging case (with earbuds) is plugged in.

UV-C LED does not operate while device is charging wirelessly

such as on a pad or third party wireless charging device (this

only applies to HBS-FN6 and HBS-FN5W).

- Independent testing shows the UVnano charging case kills

99.9% of bacteria on the speaker mesh of the earbuds in ten

minutes while charging. The UV-C LED function works only

when the charging case is connected to the power cable.

- For best result, it is recommended that the full 10 minutes of

UV-C LED operation be performed while charging.

NOTE:

The status indicator light blinks slowly during the UV-C LED operation.

The light will slowly illuminate on and off until the UV-C LED function is complete (10 minutes).

Once completed, the indicator light will switch back to the always-on battery indicator, see

"Battery Status".

HBS-FN4 and HBS-FN5W models do not have a UV-C LED and mood light.

Performance may vary based on usage conditions.

A white product may slightly differ in the color of the UV-C LED contact area, but there is no

problem with the product performance.

UV-C LED does not operate while charging wirelessly.

CAUTION: Be aware that the temperature of the earbuds may rise while the UV-C LED is operating.

Avoid direct eye and skin exposure to UV light.

Keep out of reach of children.

12

Out of Range

If the device connected to the product is out of effective communication range, the communication

signal becomes weak and the communication is lost. The effective communication range may vary

depending on surrounding and other conditions.

If the device comes back within effective communication range, the product automatically reconnects

to the device. If the device is not automatically reconnected, touch the left or right earbud once to

connect them.

LG TONE Free

If you install the “LG TONE Free” app, you can use Check Earbud Battery, Voice Alert, Change Equalizer

Mode, Check Last Connected Location Information, and Find My Earbuds functions. Check out the

app for more details.

To install the “LG TONE Free” app, search LG TONE Free in the Google Play Store or App Store or scan

the QR code below.

It supports Android 5.0 or higher and iOS 11 or higher.

Google Play App Store

13

Troubleshooting

Problem Solution

The power does not turn on Check the battery level and charge it.

If unable to make a call with

HBS-FN6

If the mobile phone does not support headset and hands-free functions,

you cannot use the calling features.

Check the battery level and charge it.

If unable to register

HBS-FN6 to mobile

phone

Check whether HBS-FN6 is turned on.

Check if the charging case of HBS-FN6 is in search mode.

- Press the pairing button on the charging case to switch to search mode.

If you replaced the earbuds

or there is a problem with

the operation

Put the earbuds in the charging case and, with the case open, press the

pairing button for 10 seconds or more.

- The factory reset proceeds while the status indicator on the charging

case ashes red.

Please reconnect the device after factory reset.

14

Specications and Features

Item Comments

Bluetooth Specications V 5.0 (Headset/Hands-Free/A2DP/AVRCP)

Battery Earbud : 3.7 V / 55 mAh, Lithium-ion

Charging case : 3.7 V / 390 mAh, Lithium-ion

Talk Time

(Earbuds / With Charging case) Up to 5 / 15 hours*

Music Play Time

(Earbuds / With Charging case) Up to 6 / 18 hours*

Charging Time

Earbud : within an hour / Charging case : within 2 hours

Fast Charging : 5 min charge for up to 60 min playtime

※ When charging wired at room temperature

Rated Input Voltage Earbud : DC 5 V, 110 mA

Charging case : DC 5 V, 500 mA

Operating Temperature 0 °C (+32 °F) ~ +35 °C (+95 °F)

Dimensions (mm) /

Weight (g)

Earbud : 16.1 mm (W) X 32.65 (L) X 25.0mm (H) / 5.4 g (One earbud)

Charging case : 54.5 mm (W) X 54.5 mm (L) X 27.5 mm (H) / 39 g

Frequency range 2402 MHz to 2480 MHz

Output power (Max.) 10 dBm

*Duration of use may vary depending on the connected mobile device, features being used, settings,

signal strength, operating temperature, frequency band, and other methods of use.

Fast charging feature does not apply when charging case is placed on wireless charging device such as a pad.

Wireless charging feature charges at a slower rate due to less power being transmitted to the charging case.

Utilisation du LGTONEFree™

15

FRANÇAIS

REMARQUE : An d'obtenir les meilleures performances et éviter toute détérioration ou mauvaise

utilisation des écouteurs, veuillez lire attentivement toutes les informations avant de les utiliser.

LG Electronics Inc. se réserve le droit d'apporter toute modication ou correction à ce manuel en cas

d'erreurs typographiques ou d'inexactitudes.

LG TONE Free (HBS-FN6 / HBS-FN5W / HBS-FN4) est un ensemble d'écouteurs sans l qui utilise la

technologie Bluetooth.

Ce produit peut être utilisé comme accessoire audio avec les appareils prenant en charge les prols

Bluetooth A2DP ou Mains libres.

Consignes de sécurité

!

ATTENTION

Ne démontez pas, ne modiez pas et ne réparez pas arbitrairement le produit.

N’installez pas le produit à proximité d’une chaleur excessive ou d’un matériel inammable.

Le produit peut être endommagé si un chargeur incompatible est utilisé.

Assurez-vous qu’un nourrisson ou un enfant n’avale aucun aimant ou petit composant du produit.

Veillez à ce qu’aucun corps étranger n’entre dans les connecteurs du chargeur (port de

chargement et che d’alimentation). Le non-respect de cette consigne pourrait entraîner un

incendie ou une électrocution.

Si vous avez des implants médicaux, consultez votre médecin avant d’utiliser cet appareil.

Ce produit comporte une batterie intégrée, qui ne peut pas être retirée ni remplacée.

Pour votre sécurité, ne retirez pas la batterie intégrée au produit.

Si vous remplacez arbitrairement la batterie ou si vous la remplacez incorrectement, elle peut

exploser.

La batterie lithium-ion est un composant dangereux qui peut provoquer des blessures.

Le remplacement de la batterie par un professionnel non qualié peut endommager votre

appareil.

16

Ne remplacez pas vous-même la batterie. La batterie pourrait être endommagée et risquerait

de provoquer une surchauffe et des blessures. La batterie doit être remplacée par un fournisseur

de services agréé. La batterie doit être recyclée et ne pas être jetée avec les déchets ménagers.

Ne jetez pas la batterie arbitrairement. Suivez la réglementation locale relative à l’élimination

des batteries.

L’élimination d’une batterie dans le feu ou un four chaud, ou encore la découpe ou l’écrasement

mécanique d’une batterie peuvent provoquer une explosion.

Une batterie soumise à une très faible pression d’air pourrait entraîner une explosion ou la fuite

d’un liquide ou d’un gaz inammable.

!

AVERTISSEMENT

Évitez de faire tomber votre produit de haut.

Assurez-vous ne pas mettre le produit en contact avec de l’eau, de l’alcool ou du benzène.

Ne rangez pas le produit dans un endroit humide ou poussiéreux.

Ne posez aucun objet lourd sur le produit.

Ce produit est étanche selon l’indice IPx4 (étanche aux actes de la vie quotidienne).

(L’indice d’étanchéité IPx4 s’applique uniquement aux oreillettes.)

N’immergez pas le produit dans l’eau et ne l’utilisez pas dans un endroit humide tel qu’une

salle de bains.

!

REMARQUE

Si le produit est excessivement exposé à la sueur, nettoyez-le.

Nettoyez régulièrement les oreillettes.

17

Haut-parleurHD

Si le réseau de communication de l’appareil auquel vous êtes connecté prend en charge les appels

vocaux enHD, vous pouvez proter d’appels vocaux et écouter de la musique en haute dénition.

Composants du produit

Oreillettes LG TONE Free™

(oreillettes en gel taille moyenne)

Étui de chargement UV

Oreillettes en gel supplémentaires

(tailles petite et grande) Câble de chargement USB TypeC™

Manuel de référence Guide de l’utilisateur Carte WEEE

(Europe uniquement)

REMARQUE: L’aspect réel du produit peut différer des illustrations présentes dans ce manuel.

Assurez-vous de n’utiliser que des composants de LGElectronics authentiques. L’utilisation d’un

composant non authentique peut endommager le produit et, par conséquent, annuler la garantie.

Utilisez le câble USB TypeC™ fourni avec le produit.

!ATTENTION

18

Description du produit

Étui de chargement

Oreillettes

*L’aspect et les caractéristiques de ce produit peuvent varier selon le modèle.

REMARQUE: La référence HBS-FN4 ne possède pas de LED UV-C ni de lumière d’ambiance.

LED UV-C

Bouton de couplage /

contrôle de la batterie

Port de chargement

Bornes de chargement

Voyant d’état

Lumière d’ambiance

(Lorsque vous ouvrez l’étui de chargement,

la lumière d’ambiance s’allume et s’éteint).

LED UV-C

Maille du haut-parleur

Micro

Pavé tactile

Bornes de chargementBornes de chargement

Maille du haut-parleur

La page charge ...

LG HBS-FN6 Manuel utilisateur

Ce manuel convient également à

LG HBS-FN6 Manuel utilisateur

dans d''autres langues

Documents connexes