Continental HFM4C01 Manuel utilisateur

Taper
Manuel utilisateur
User Manual
Hand Free Module (HFM)
HFM4C01
.
Applicant:Continental Automotive Technologies
GmbH
P/N: Hand free module
M/N: HFM4C01
Brand:Continental
FCC : KR5HFM4C01
IC 7812D-HFM4C01
General Product Functional Description
The HFM4C01 is a radio frequency transmitter-receiver used in vehicle access systems.
The vehicle access system includes:
Key fob, which is a remote device
LF Antennae
Hand Free Module (HFM):
It includes a 125 kHz magnetic field and transponder transmitters. The HFM drives up to
6 external dedicated antennas for the 125 kHz transmission. Two are located in the door
trims, one or two in the EXT Rear / Front Bumpers depending on vehicle definition, two
within the vehicle cockpit and one optional in the trunk depending on the vehicle’s
applications.
It also includes an integrated RF receiver for 433.92 MHz. The receiver is designed in
direct placement and the HFM integrates a RF printed antenna.
The main functions performed by the system are:
RKE functions (key less features)
Hand Free functions for vehicle access and engine start
Immobilizer
LF antennae management
Remote parking
Continental
Model: HFM4C01
Product: Hand Free Module
FCC ID: KR5HFM4C01
IC: 7812D-HFM4C01
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1)1) this device may not cause harmful interference, and (2) this device must accept
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
No changes shall be made to the equipment without the manufacturer’s permission as
this may void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for portable use
conditions.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:Op
(1)1) this device may not cause harmful interference, and (2) this device must accept
interference received, including interference that may cause undesired operation of the
device.
This equipment complies with the safety requirements for RF exposure in accordance
with RSS-102 Issue 5 2015 for portable use conditions.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil d
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Cet équipement est conforme avec les exigences de sécurité pour l'exposition aux RF
conformément aux RSS - 102 Issue 5 2015 pour des conditions d'utilisation portables.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Continental HFM4C01 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues