JVC KW-R961BT Manuel utilisateur

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ENGLISH

FRANÇAIS

B5A-0113-20 [E/EN]

KD-R961BT / KD-R864BT / KD-R862BT / KD-R861BT

CD RECEIVER

INSTRUCTION MANUAL

RÉCEPTEUR CD

MANUEL D’INSTRUCTIONS

Please read all instructions carefully before

operation to obtain the best possible performance

from the unit.

Veuillez lires les instructions attentivement avant

d’utiliser l’appareil afin d’obtenir les meilleures

performances possibles de l’appareil.

JS_JVC_KD_R961BT_E_C_20.indd 1JS_JVC_KD_R961BT_E_C_20.indd 1 20/10/2014 11:07:51 AM20/10/2014 11:07:51 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

i

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for

countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling

these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and

waste disposal will help conserve resources whilst preventing detrimental effects on our health and the

environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Information sur l’élimination des anciens équipements électriques et électroniques et piles

électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas

être éliminés comme ordures ménagères.

Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites

capables de traiter ces produits et leurs déchets.

Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et

l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur

notre santé et sur l’environnement.

Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient du plomb.

For Israel

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been

classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no

danger of hazardous radiation outside the unit.

Marquage des produits utilisant un laser

L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des rayons laser

de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il n’y a pas de danger de

radiation accidentelle hors de l’appareil.

Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC

Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVC Technical Services Europe GmbH

Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany

Déclaration de conformité vis à vis de la Directive 1999/5/CE de R&TTE

Déclaration de conformité se rapportant à la directive EMC 2004/108/EC

Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU

Fabricant:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Représentants dans l’UE:

JVC Technical Services Europe GmbH

Konrad-Adenauer-Allee 1-11, D-61118 Bad Vilbel, Germany

JS_JVC_KD_R961BT_E_S_20.indd iJS_JVC_KD_R961BT_E_S_20.indd i 10/11/2014 11:43:38 AM10/11/2014 11:43:38 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

ii

English

Hereby, JVC KENWOOD declares that this unit

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT is

in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC.

Français

Par la présente JVC KENWOOD déclare que

l’appareil KD-R961BT/KD-R864BT/KD-R862BT/

KD-R861BT est conforme aux exigences

essentielles et aux autres dispositions pertinentes

de la directive 1999/5/CE.

Par la présente, JVC KENWOOD déclare que ce

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

est conforme aux exigences essentielles et aux

autres dispositions de la directive 1999/5/CE qui lui

sont applicables.

Deutsch

Hiermit erklärt JVC KENWOOD, dass sich dieser

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

in Übereinstimmung mit den grundlegenden

Anforderungen und den anderen relevanten

Vorschriften der Richtlinie 1999/5/EG befindet.

(BMWi)

Hiermit erklärt JVC KENWOOD die

Übereinstimmung des Gerätes KD-R961BT/

KD-R864BT/KD-R862BT/KD-R861BT mit den

grundlegenden Anforderungen und den anderen

relevanten Festlegungen der Richitlinie 1999/5/

EG. (Wien)

Nederlands

Hierbij verklaart JVC KENWOOD dat het toestel

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

in overeenstemming is met de essentiële eisen

en de andere relevante bepalingen van richtlijn

1999/5/EG.

Bij deze verklaat JVC KENWOOD dat deze

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

voldoet aan de essentiële eisen en aan de overige

relevante bepalingen van Richtlijn 1999/5/EC.

Italiano

Con la presente JVC KENWOOD dichiara che questo

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

è conforme ai requisiti essenziali ed alle altre

disposizioni pertinenti stabilite dalla direttiva

1999/5/CE.

Español

Por medio de la presente JVC KENWOOD declara

que el KD-R961BT/KD-R864BT/KD-R862BT/

KD-R861BT cumple con los requisitos esenciales

y cualesquiera otras disposiciones aplicables o

exigibles de la Directiva 1999/5/CE.

Português

JVC KENWOOD declara que este KD-R961BT/

KD-R864BT/KD-R862BT/KD-R861BT está conforme

com os requisitos essenciais e outras disposições

da Directiva 1999/5/CE.

Polska

JVC KENWOOD niniejszym oświadcza, że

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

spełnia zasadnicze wymogi oraz inne istotne

postanowienia dyrektywy 1999/5/EC.

Český

JVC KENWOOD tímto prohlašuje, že tento

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

je ve shodě se základními požadavky a dalšími

příslušnými ustanoveními směrnice 1999/5/ES.

Magyar

Alulírott, JVC KENWOOD, kijelenti, hogy a jelen

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

megfelel az 1999/5/EC irányelvben meghatározott

alapvető követelményeknek és egyéb vonatkozó

előírásoknak.

Svenska

Härmed intygar JVC KENWOOD att denna

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

stär l överensstämelse med de väsentliga

egenskapskrav och övriga relevanta bestämmelser

som framgår av direktiv 1999/5/EG.

Suomi

JVC KENWOOD vakuuttaa täten että KD-R961BT/

KD-R864BT/KD-R862BT/KD-R861BT tyyppinen

laite on direktiivin 1999/5/EY oleellisten

vaatimusten ja sitä koskevien direktiivin muiden

ehtojen mukainen.

Slovensko

S tem JVC KENWOOD izjavlja, da je ta KD-R961BT/

KD-R864BT/KD-R862BT/KD-R861BT v skladu

z osnovnimi zahtevami in ostalimi ustreznimi

predpisi Direktive 1999/5/EC.

Slovensky

Spoločnosť JVC KENWOOD týmto vyhlasuje, že

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

spĺňa zákldné požiadavky a ďalšie prislušné

ustanovenia Direktĺvy 1999/5/EC.

Dansk

Undertegnede JVC KENWOOD erklærer harved,

at følgende udstyr KD-R961BT/KD-R864BT/

KD-R862BT/KD-R861BT overholder de væsentlige

krav og øvrige relevante krav i direktiv 1999/5/EF.

Ελληνικά

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ JVC KENWOOD ΔΗΛΩΝΕΙ ΟΤΙ

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ

ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ

ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/EK.

Eesti

Sellega kinnitab JVC KENWOOD, et see KD-R961BT/

KD-R864BT/KD-R862BT/KD-R861BT vastab

direktiivi 1999/5/EC põhilistele nõudmistele ja

muudele asjakohastele määrustele.

Latviešu

Ar šo, JVC KENWOOD, apstiprina, ka KD-R961BT/

KD-R864BT/KD-R862BT/KD-R861BT atbilst

Direktīvas 1999/5/EK galvenajām prasībām un

citiem tās nosacījumiem.

Lietuviškai

Šiuo, JVC KENWOOD, pareiškia, kad šis KD-R961BT/

KD-R864BT/KD-R862BT/KD-R861BT atitinka

pagrindinius Direktyvos 1999/5/EB reikalavimus ir

kitas svarbias nuostatas.

Malti

Hawnhekk, JVC KENWOOD, jiddikjara li dan

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

jikkonforma mal-ħtiġijiet essenzjali u ma

provvedimenti oħrajn relevanti li hemm fid-

Dirrettiva 1999/5/EC.

Українська

Компанія JVC KENWOOD заявляє, що цей виріб

KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT

відповідає ключовим вимогам та іншим

пов’язаним положенням Директиви 1999/5/EC.

Turkish

Bu vesileyle JVC KENWOOD, KD-R961BT/

KD-R864BT/KD-R862BT/KD-R861BT ünitesinin,

1999/5/EC Direktifinin başlıca gereksinimleri

ve diğer ilgili hükümleri ile uyumlu olduğunu

beyan eder.

Русский

Настоящим, JVC КЕНВУД декларирует, что это

устройство “KD-R961BT/KD-R864BT/KD-R862BT/

KD-R861BT” соответствует необходимым

требованиям и другим важным положениям

директивы 1999/5/EC.

Україна

Цим, JVC KENWOOD декларує, що цей виріб

“KD-R961BT/KD-R864BT/KD-R862BT/KD-R861BT”

Відповідає суттєвим вимогам та іншим

відповідним пунктам Директиви 1999/5/EC.

JS_JVC_KD_R961BT_E_S_20.indd iiJS_JVC_KD_R961BT_E_S_20.indd ii 20/10/2014 11:08:18 AM20/10/2014 11:08:18 AM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

2

CONTENTS BEFORE USE

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of

the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded

data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short

circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to

evaporate.

• USB rating is indicated on the main unit. To view, detach the faceplate. (

3

)

Remote control (RM-RK52):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or

equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used

batteries promptly. If swallowed, contact a physician immediately.

BEFORE USE 2

BASICS 3

GETTING STARTED 4

CD / USB / iPod / ANDROID 5

RADIO 7

AUX 8

BLUETOOTH® 9

AUDIO SETTINGS 14

DISPLAY SETTINGS 17

MORE INFORMATION 18

TROUBLESHOOTING 20

SPECIFICATIONS 22

INSTALLATION /

CONNECTION 24

How to read this manual

• Operations are explained mainly

using buttons on the faceplate of

KD-R861BT

.

• English language is used for

the display explanation in this

manual.

• [

XX

] indicates the selected items.

•

( XX)

indicates references are

available on the stated page.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector: Detach the faceplate and clean the connector

gently with a cotton swab, being careful not to damage the connector.

Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse

side of the faceplate)

JS_JVC_KD_R961BT_E_EN_1.indd 2JS_JVC_KD_R961BT_E_EN_1.indd 2 23/7/2014 1:45:05 PM23/7/2014 1:45:05 PM

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

3

ENGLISH

BASICS

To On the faceplate On the remote control

Turn on the power

Press

.

• Press and hold to turn off the power.

—

Adjust the volume Turn the volume knob. Press

or .

Press the volume knob to mute the sound or pause playback.

• Press again to cancel.

Press

to mute the sound or pause playback.

• Press again to cancel.

Select a source

• Press

repeatedly.

• Press

, then turn the volume knob within 2 seconds.

Press SOURCE repeatedly.

Change the display

information

Press

repeatedly.

( 20)

—

Remote control (RM-RK52)

KD-R961BT

can be remotely controlled with an optionally purchased

remote control.

Attach Detach How to reset

Your preset

adjustments will

also be erased.

KD-R961BT

Faceplate

Volume knob

(turn/press)

Loading slot

Display window

Detach button

How to replace the battery

Pull out the insulation sheet

when using for the first time.

Remote sensor (Do not expose to bright sunlight.)

Remote control functions are not available for

KD-R864BT

/

KD-R862BT

/

KD-R861BT

.

JS_JVC_KD_R961BT_E_EN_20_1.indd 3JS_JVC_KD_R961BT_E_EN_20_1.indd 3 20/10/2014 11:08:43 AM20/10/2014 11:08:43 AM

4

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

GETTING STARTED

Cancel the demonstration

1

Press and hold .

2 Turn the volume knob to select [

DEMO

], then press the knob.

3 Turn the volume knob to select [

DEMOOFF

], then press the knob.

4 Press to exit.

Set the clock

1

Press and hold .

2 Turn the volume knob to select [

CLOCK

], then press the knob.

3 Turn the volume knob to select [

CLOCKSET

], then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Day

Hour Minute

5 Turn the volume knob to select [

24H/ 12H

], then press the knob.

6 Turn the volume knob to select [

12 HOUR

] or [

24 HOUR

], then press the

knob.

7 Press to exit.

To return to the previous setting item, press .

Set the basic settings

1

Press and hold .

2 Turn the volume knob to make a selection (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.

4 Press to exit.

To return to the previous setting item, press .

1

2

Default:

XX

SETTINGS

BEEP

ON

:Activates the keypress tone.;

OFF

:Deactivates.

SRC SELECT

AM

*

ON

:Enables AM in source selection.;

OFF

:Disables.

AUX

*

ON

:Enables AUX in source selection.;

OFF

:Disables.

F/W UPDATE

SYSTEM / BLUETOOTH

F/W xxxx

YES

:Starts upgrading the firmware.;

NO

:Cancels (upgrading is not

activated).

For details on how to update the firmware, see:

<http://www.jvc.net/cs/car/>.

CLOCK

CLOCK SYNC

AUTO

:The clock time is automatically set using the Clock Time (CT) data

in FM Radio Data System signal.;

OFF

:Cancels.

CLOCK DISP ON

:The clock time is shown on the display even when the unit is turned

off.;

OFF

:Cancels.

ENGLISH

Selected language is use as the display language for menu and Tag

information (folder name, file name, song title, artist name, album name)

if applicable.

By default, the menu language is:

ENGLISH

РУССКИЙ

* Not displayed when the corresponding source is selected.

3

JS_JVC_KD_R961BT_E_EN_1.indd 4JS_JVC_KD_R961BT_E_EN_1.indd 4 23/7/2014 1:45:09 PM23/7/2014 1:45:09 PM

ENGLISH

5

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

CD / USB / iPod / ANDROID

To On the faceplate On the remote control

Reverse / Fast-forward

*

3

Press and hold .

Press and hold

.

Select a track/file Press

.

Press

.

Select a folder

*

4

Press . Press .

Repeat play

*

5

Press repeatedly.

TRACK RPT

/

RPT OFF

: Audio CD or JVC Playlist Creator (JPC) /

JVC Music Control (JMC) file

( 19)

TRACK RPT

/

FOLDER RPT

/

RPT OFF

: MP3/WMA/AAC/WAV file

ONE RPT

/

ALL RPT

/

RPT OFF

: iPod or ANDROID

Random play

*

5

Press repeatedly.

ALL RND

/

RND OFF

: Audio CD

FOLDERRND

/

ALL RND

/

RND OFF

: MP3/WMA/AAC/WAV file or JPC / JMC

file

SONG RND

/

ALL RND

/

RND OFF

: iPod or ANDROID

*

1

Do not leave the cable inside the car when not using.

*

2

When connecting an Android device, “Press [VIEW] to install JVC MUSIC PLAY APP” is shown. Follow the instructions to install the

application. You can also install the latest version of JVC MUSIC PLAY application on your Android device before connecting.

(

19

)

*

3

For ANDROID: Applicable only when [

AUTO MODE

] is selected.

(

6

)

*

4

For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ ANDROID.

*

5

For iPod/ ANDROID: Applicable only when [

HEAD MODE

]/ [

AUTO MODE

] is selected. (

6

)

Start playback

The source changes automatically and

playback starts.

CD

Eject disc Label side

USB input terminal

USB 2.0 cable

*

1

(commercially available)

Micro USB 2.0 cable

*

1

(commercially available)

(Accessory of the iPod/

iPhone)*

1

USB

iPod/iPhone

ANDROID

*

2

JS_JVC_KD_R961BT_E_EN_1.indd 5JS_JVC_KD_R961BT_E_EN_1.indd 5 23/7/2014 1:45:10 PM23/7/2014 1:45:10 PM

6

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

To On the faceplate

Select control

mode

While in iPod source, press repeatedly.

HEAD MODE

: Control from the unit.

IPHONE MODE

: Control from the iPod/iPhone.

However,

you

can still play/pause or file skip from the unit.

While in ANDROID source, press

repeatedly.

AUTO MODE

: Control from the unit (using JVC MUSIC

PLAY application).

AUDIO MODE

: Control other media player applications

from the Android device (without using JVC

MUSIC PLAY application). However, you can

still play/pause or file skip from the unit.

Select music

drive

Press

repeatedly.

The stored songs in the following start playback.

• Selected internal or external memory of a smartphone

(Mass Storage Class).

• Selected drive of a multiple drives device.

Change the playback speed of the Audiobook

While listening to the iPod and [

HEADMODE

] is selected

( Select control mode)

....

1 Press and hold .

2 Turn the volume knob to select [

IPOD

], then press the knob.

3 Press the volume knob to select [

AUDIOBOOKS

].

4 Turn the volume knob to make a selection, then press the knob.

0.5×SPEED

/

1×SPEED

/

2×SPEED

: Select the desired playback speed of the

Audiobooks sound file in your iPod/iPhone.

(Default: Depends on your iPod/iPhone setting.)

5 Press to exit.

To return to the previous setting item, press .

Select a file from a folder/list

1

Press .

2 Turn the volume knob to select a folder/list, then press the

knob.

3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For MP3/WMA/AAC/WAV or JPC / JMC file:

Turn the volume knob quickly.

For iPod:

You can search for a file according to the first character.

Press

or turn the volume knob quickly to select the

desired character (A to Z/ 0to9/ OTHERS).

• Select “OTHERS” if the first character is other than Ato Z,

0 to 9.

• To return to the previous setting item, press

.

• To cancel, press and hold

.

• For iPod, applicable only when [

HEADMODE

] is selected. ( 

Select

control mode

)

• For ANDROID, applicable only when [

AUTO MODE

] is selected.

(



Select control mode

)

CD / USB / iPod / ANDROID

JS_JVC_KD_R961BT_E_EN_1.indd 6JS_JVC_KD_R961BT_E_EN_1.indd 6 23/7/2014 1:45:12 PM23/7/2014 1:45:12 PM

ENGLISH

7

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

RADIO

“ST” lights up when receiving an FM stereo broadcast with sufficient

signal strength.

Search for a station

1

Press repeatedly to select FM or AM.

2 Press (or press on RM-RK52) to search for a station

automatically.

(or)

Press and hold (or press and hold on RM-RK52) until

“M” flashes, then press repeatedly to search for a station manually.

Settings in memory

You can store up to 18 stations for FM and 6 stations for AM.

Store a station

While listening to a station....

Press and hold one of the number buttons (1 to 6).

(or)

1 Press and hold the volume knob until “PRESETMODE” flashes.

2 Turn the volume knob to select a preset number, then press the

knob.

The preset number flashes and “MEMORY” appears.

Select a stored station

Press one of the number buttons (1to6).

(or)

1 Press

2 Turn the volume knob to select a preset number, then press the

knob to confirm.

Other settings

1

Press and hold .

2 Turn the volume knob to select [

TUNER

], then press the knob.

3 Turn the volume knob to make a selection

(

see the following table

)

,

then press the knob.

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

5 Press to exit.

To return to the previous setting item, press .

Default:

XX

RADIO TIMER

Turns on the radio at a specific time regardless of the current source.

1

ONCE

/

DAILY

/

WEEKLY

/

OFF

:Select how often the timer will be turned

on.

2

FM

/

AM

:Select the source.

3

01

to

18

(for FM)/

01

to

06

(for AM):Select the preset station.

4

Set the activation day *

1

and time.

“

M

” lights up when complete.

Radio Timer will not activate for the following cases.

• The unit is turned off.

• [

OFF

] is selected for [

AM

] in [

SRCSELECT

]

after Radio Timer for AM is

selected. (

4

)

*

1

Selectable only when [

ONCE

] or [

WEEKLY

] is selected in step

1

.

JS_JVC_KD_R961BT_E_EN_1.indd 7JS_JVC_KD_R961BT_E_EN_1.indd 7 23/7/2014 1:45:12 PM23/7/2014 1:45:12 PM

8

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

RADIO

SSM SSM01–06

/

SSM07–12

/

SSM13–18

:Automatically presets up to

18 stations for FM. “SSM” stops flashing when the first 6 stations are stored.

Select

SSM07–12

/

SSM13–18

to store the following 12 stations.

LOCAL SEEK

*

2

ON

:Searches only stations with good reception.;

OFF

:Cancels.

• Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

IF BAND AUTO

:Increases the tuner selectivity to reduce interference noises from

adjacent FM stations. (Stereo effect may be lost.);

WIDE

:Subjects to

interference noises from adjacent FM stations, but sound quality will not be

degraded and the stereo effect will remain.

MONO ON

:Improves the FM reception, but the stereo effect will be lost.;

OFF

:Cancels.

NEWS-STBY

*

2

ON

:The unit will temporarily switch to News Programme if available.;

OFF

:Cancels.

REGIONAL

*

2

ON

: Switches to another station only in the specific region using the “AF”

control.;

OFF

:Cancels.

AF SET

*

2

ON

: Automatically searches for another station broadcasting the same

program in the same Radio Data System network with better reception

when the current reception is poor.;

OFF

: Cancels.

TI SET

*

2

ON

: Allows the unit to temporarily switch to Traffic Information if available

(“TI” lights up). ;

OFF

:Cancels.

PTY SEARCH

*

2

Select a PTY code (see below).

If there is a station broadcasting a program of the same PTY code as you

have selected, that station is tuned in.

PTY code

:

NEWS

,

AFFAIRS

,

INFO

,

SPORT

,

EDUCATE

,

DRAMA

,

CULTURE

,

SCIENCE

,

VARIED

,

POP M

(music),

ROCK M

(music),

EASY M

(music),

LIGHT M

(music),

CLASSICS

,

OTHER M

(music),

WEATHER

,

FINANCE

,

CHILDREN

,

SOCIAL

,

RELIGION

,

PHONE IN

,

TRAVEL

,

LEISURE

,

JAZZ

,

COUNTRY

,

NATION M

(music),

OLDIES

,

FOLK M

(music),

DOCUMENT

*

2

Only for FM source.

Use a portable audio player

1

Connect a portable audio player (commercially available).

2 Select [

ON

] for [

AUX

] in [

SRC SELECT

]. (

4

)

3 Press repeatedly to select AUX.

4 Turn on the portable audio player and start playback.

Use a 3-core plug head stereo mini plug for optimum audio

output.

3.5mm stereo mini plug with “L” shaped connector

(commercially available)

Portable audio player

Auxiliary input jack

AUX

JS_JVC_KD_R961BT_E_EN_f.indd 8JS_JVC_KD_R961BT_E_EN_f.indd 8 28/8/2014 2:16:17 PM28/8/2014 2:16:17 PM

ENGLISH

9

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Pair a Bluetooth device

When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit

and the device.

1 Press to turn on the unit.

2 Search and select “JVC UNIT” on the Bluetooth device.

“BTPAIRING” flashes on the display.

• For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN)

code immediately after searching.

• Refer also to the manual supplied with your Bluetooth device.

3 Perform (A) or (B) depending on what scrolls on the display.

For some Bluetooth devices, pairing sequence may vary from the steps described below.

(A) “[Device Name]” “XXXXXX” “VOL–YES” “BACK–NO”

“XXXXXX” is a 6-digit passkey randomly generated during each pairing.

Ensure that the passkey which appears on the unit and Bluetooth device is the same.

Press the volume knob to confirm the passkey.

Operate the Bluetooth device to confirm the passkey.

(B) “[Device Name]” “VOL–YES” “BACK–NO”

Press the volume knob to start pairing.

• If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the

Bluetooth device.

You can change to a desired PIN code before pairing. (

13

)

• If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.

“PAIRING COMPLETED” appears when pairing is completed and “

” will light up when the Bluetooth

connection is established.

• Up to five devices can be registered (paired) in total.

• Only one Bluetooth device can be connected at any time.

• This unit supports Secure Simple Pairing (SSP).

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device

to the unit manually. Refer to the instruction manual of the Bluetooth device for more information.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you

reset the unit. To delete the paired device,

13

, [

DELETE PAIR

].

• When you connect iPhone/ iPod touch/ Android device to the USB input terminal, pairing request

(via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed

the device name.

Automatic pairing request is activated only if:

– Bluetooth function of the connected devcie is turned on.

– [

AUTO CNNT

] is set to [

ON

]. (

13

)

– JVC MUSIC PLAY application is installed on the Android device.

BLUETOOTH®

BLUETOOTH — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP)

– Serial Port Profile (SPP)

– Phonebook Access Profile (PBAP)

– Advanced Audio Distribution Profile (A2DP)

– Audio/Video Remote Control Profile (AVRCP)

Supported Bluetooth codecs

– Sub Band Codec (SBC)

– Advanced Audio Coding (AAC)

Connect the microphone

Adjust the microphone

angle

Secure using cord clamps

(not supplied) if necessary.

Microphone input jack

Microphone

(supplied)

Rear panel

JS_JVC_KD_R961BT_E_EN_2.indd 9JS_JVC_KD_R961BT_E_EN_2.indd 9 7/8/2014 1:45:08 PM7/8/2014 1:45:08 PM

10

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:

– All the buttons flash.

– The unit answers the call automatically if [

AUTO ANSWER

] is set to a selected time. ( 

11

)

During a call:

– The buttons and display illuminate according to the settings made for [

COLOR

]. ( 

17

)

– If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.

To On the faceplate On the remote control

Answer a call

Press

or the volume knob.

Press

.

Reject a call

Press and hold

or the volume

knob.

Press and hold

.

End a call

Press and hold

or the volume

knob.

Press and hold

.

Adjust the phone

volume

[

00

] to [

50

] (Default: [

15

]*)

Turn the volume knob during a call.

• This adjustment will not affect the

volume of the other sources.

—

Switch between hands-

free and private talk

modes

Press the volume knob during a call.

• Operations may vary according to the

connected Bluetooth mobile phone.

—

* Not applicable for iPhone. During a call, the unit synchronizes the phone volume on the iPhone to the unit.

Improve the voice quality

While talking on the phone....

1 Press and hold .

2 Turn the volume knob to make a selection

(

see the following table

)

, then press the

knob.

3 Repeat step 2 until the desired item is

selected or activated.

4 Press to exit.

To return to the previous setting item, press

.

Default:

XX

MIC LEVEL

–10

—

+10

(

–4

):The sensitivity of

the microphone increases as the number

increased.

NOISE RDCT –5

—

+5

(

0

):Adjust the noise reduction

level until the least noise is being heard

during a phone conversation.

ECHO CANCEL –5

—

+5

(

0

):Adjust the echo

cancellation delay time until the least

echo is being heard during a phone

conversation.

BLUETOOTH®

JS_JVC_KD_R961BT_E_EN_ff.indd 10JS_JVC_KD_R961BT_E_EN_ff.indd 10 29/9/2014 4:17:53 PM29/9/2014 4:17:53 PM

ENGLISH

11

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also

possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode.

2 Turn the volume knob to make a selection (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on

the selected item.

To return to the previous setting item, press

.

RECENT CALL

1

Press the volume knob to select a name or a phone number.

• “>” indicates call received, “<“ indicates call made, “M” indicates call missed.

• “NO HISTORY” appears if there is no recorded call history or call number.

2

Press the volume knob to call.

PHONEBOOK

1

Press to select the desired letter (A to Z, 0to9, and OTHERS).

• “OTHERS” appears if the first character is other than Ato Z, 0 to 9.

2

Turn the volume knob to select a name, then press the knob.

3

Turn the volume knob to select a phone number, then press the knob to call.

• If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the

unit when pairing.

• This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)

Make the settings for receiving a call

1

Press to enter Bluetooth mode.

2 Turn the volume knob to make a selection

(see the following table), then press the

knob.

3 Repeat step 2 until the desired item is

selected or activated.

To return to the previous setting item, press

.

Default:

XX

SETTINGS

AUTO ANSWER

01 SEC

—

30 SEC

:The unit answers

incoming call automatically in

the selected time (in seconds).;

OFF

:Cancels.

BLUETOOTH®

JS_JVC_KD_R961BT_E_EN_1.indd 11JS_JVC_KD_R961BT_E_EN_1.indd 11 23/7/2014 1:45:15 PM23/7/2014 1:45:15 PM

12

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

DIAL NUMBER

1

Turn the volume knob to select a number (0 to 9) or character ( , #,

+).

2

Press to move the entry position.

Repeat steps

1

and

2

until you finish entering the phone number.

3

Press the volume knob to call.

VOICE

Speak the name of the contact you want to call or the voice command to

control the phone functions.

( 

Make a call using voice recognition

)

Make a call using voice recognition

1

Press and hold to activate the connected phone.

2 Speak the name of the contact you want to call or the voice

command to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the

instruction manual of the connected phone for details.

• This unit also supports the intelligent personal assistant function of

iPhone.

Delete a contact

1

Press to enter Bluetooth mode.

2 Turn the volume knob to select [

RECENTCALL

], then press the knob.

3 Turn the volume knob to select a contact.

4 Press and hold to enter delete mode.

5 Turn the volume knob to select [

DELETE

] or [

DELETE ALL

], then press

the knob.

DELETE

: Selected name or phone number in step 3 is deleted.

DELETE ALL

: All names or phone numbers in [

RECENTCALL

] in step 2 is

deleted.

6 Turn the volume knob to select [

YES

], then press the knob.

• To return to the previous setting item, press .

• Not applicable for mobile phone that supports PBAP.

BLUETOOTH®

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode.

2 Turn the volume knob to select [

RECENTCALL

], [

PHONEBOOK

], or

[

DIALNUMBER

], then press the knob.

3 Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6).

“MEMORY P(selected preset number)” appears when the contact is

stored.

To erase a contact from the preset memory, select [

DIALNUMBER

] in step 2

and store a blank number.

Make a call from memory

1

Press to enter Bluetooth mode.

2 Press one of the number buttons (1 to 6).

3 Press the volume knob to call.

“NO PRESET” appears if there is no contacts stored.

Bluetooth mode settings

1

Press and hold .

2 Turn the volume knob to select [

BLUETOOTH

], then press the knob.

3 Turn the volume knob to make a selection

( 13)

, then press the

knob.

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

5 Press to exit.

To return to the previous setting item, press .

JS_JVC_KD_R961BT_E_EN_2.indd 12JS_JVC_KD_R961BT_E_EN_2.indd 12 7/8/2014 2:50:55 PM7/8/2014 2:50:55 PM

ENGLISH

13

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

BLUETOOTH®

Bluetooth compatibility check mode

You can check the connectivity of the supported profile between the

Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“BLUETOOTH”

“CHECK MODE” appears. “SEARCH NOW USING

PHONE”

“PIN IS 0000” scrolls on the display.

2 Search and select “JVC UNIT” on the Bluetooth device within

3minutes.

3 Perform (A), (B) or (C) depending on what appears on the display.

(A) “PAIRING”

“XXXXXX” (6-digit passkey): Ensure that the same

passkey appears on the unit and Bluetooth device, then operate

the Bluetooth device to confirm the passkey.

(B) “PAIRING”

“PIN IS 0000”: Enter “0000” on the Bluetooth device.

(C) “PAIRING”: Operate the Bluetooth device to confirm pairing.

After pairing is successful, “PAIRING OK”

“[Device Name]” appears and

Bluetooth compatibility check starts.

If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device

to allow phonebook access to continue.

The connectivity result flashes on the display.

“PAIRING OK” and/or “H.FREE OK”*

1

and/or “A.STREAM OK”*

2

and/or

“PBAP OK”*

3

: Compatible

*

1

Compatible with Hands-Free Profile (HFP)

*

2

Compatible with Advanced Audio Distribution Profile (A2DP)

*

3

Compatible with Phonebook Access profile (PBAP)

After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has

been deleted, and the unit exits check mode.

• To cancel, press and hold

to turn off the power, then turn

on the power again.

Default:

XX

PHONE

*

1

Selects the phone or audio device to connect or disconnect.

“

” appears in front of the device name when connected.

AUDIO

*

1

APPLICATION

*

1

Shows the connected phone name using the JVC Smart Music Control

*

2

app. “

” appears in front of the device name when connected.

DELETE PAIR

1

Turn the volume knob to select a device to delete, then press the

knob.

2

Turn the volume knob to select [

YES

] or [

NO

], then press the knob.

SET PINCODE

(0000)

Changes the PIN code (up to 6 digits).

1

Turn the volume knob to select a number.

2

Press to move the entry position.

Repeat steps

1

and

2

until you finish entering the PIN code.

3

Press the volume knob to confirm.

AUTO CNNCT ON

:The unit automatically reconnect when the last connected

Bluetooth device is within range.;

OFF

:Cancels.

AUTO PAIR ON

:The unit automatically pair supported Bluetooth device (iPhone/

iPod touch/ Android device) when it is connected through USB input

terminal.Depending on the operating system of the connected device,

this function may not work. ;

OFF

:Cancels.

INITIALIZE YES

:Initializes all the Bluetooth settings (including stored pairing,

phonebook, and etc.).;

NO

:Cancels.

INFORMATION

MY



BT



NAME

: Displays the unit name (JVCUNIT).;

MY



ADDRESS

: Shows address of this unit.

*

1

You can only connect another Bluetooth device by disconnecting the connected Bluetooth

device first. “

” disappears when disconnected.

*

2

JVC Smart Music Control is designed to view JVC car receiver status and perform simple

control operations on Android smart phones.

For JVC Smart Music Control operations, visit JVC website: <http://www.jvc.net/cs/car/>.

JS_JVC_KD_R961BT_E_EN_2.indd 13JS_JVC_KD_R961BT_E_EN_2.indd 13 8/8/2014 4:21:18 PM8/8/2014 4:21:18 PM

14

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

To

On the faceplate

Select a preset

equalizer

Press repeatedly.

Press

, then turn the volume knob

within 2seconds.

Preset equalizer

:

FLAT

(default),

HARD ROCK

,

JAZZ

,

POP

,

R&B

,

TALK

,

USER1

,

USER2

,

VOCAL BOOST

,

BASS BOOST

,

CLASSICAL

,

DANCE

Store your own

sound settings

1 Press and hold .

2 Turn the volume knob to select [

EASY EQ

], then

press the knob.

3 Turn the volume knob to select [

USER1

] or

[

USER2

], then press the knob.

4 Turn the volume knob to make a selection,

then press the knob.

For settings, refer to step

2 of [

EASYEQ

].

( 

15

)

• To return to the previous setting item, press .

• To exit, press

.

Other settings

1

Press and hold .

2 Turn the volume knob to make a selection (



15

), then press the

knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press .

BLUETOOTH®

BLUETOOTH — Audio

Audio player via Bluetooth

1

Press repeatedly to select BTAUDIO (or press SOURCE

on RM-RK52).

2 Operate the Bluetooth audio player to start playback.

To On the faceplate On the remote control

Playback / pause

Press

.

Press

.

Select group or

folder

Press

. Press .

Reverse /

Forward skip

Press

.

Press

.

Reverse /

Fast-forward

Press and hold

.

Press and hold

.

Repeat play Press

repeatedly.

TRACKRPT

,

ALLRPT

,

RPTOFF

—

Random play

Press

repeatedly.

GROUPRND

,

ALLRND

,

RNDOFF

—

Operations and display indications may differ according to their

availability on the connected device.

JS_JVC_KD_R961BT_E_EN_2.indd 14JS_JVC_KD_R961BT_E_EN_2.indd 14 19/8/2014 12:18:49 PM19/8/2014 12:18:49 PM

ENGLISH

15

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

AUDIO SETTINGS

Default:

XX

EQSETTING

EQPRESET

FLAT

/

HARD ROCK

/

JAZZ

/

POP

/

R&B

/

TALK

/

USER1

/

USER2

/

VOCALBOOST

/

BASSBOOST

/

CLASSICAL

/

DANCE

:Selects a preset equalizer.

EASYEQ

1

USER1

/

USER2

:Select a preset name.

2

Adjust your own sound settings.

(For

KD-R961BT

)

SUB.W SP

*

1

*

2

:

00

to

+06

(Default:

03

SUB.W

*

1

*

3

:

–08

to

+08

00

BASS



LVL

:

–10

to

+10

00

MID



LVL:

–10

to

+10

00

TRE



LVL

:

–10

to

+10

00

)

(For

KD-R864BT

/

KD-R862BT

/

KD-R861BT

)

SUB.W SP

*

1

*

2

:

00

to

+06

(Default:

03

SUB.W

*

1

*

4

:

–08

to

+08

00

BASS



LVL

:

–06

to

+06

00

MID



LVL:

–06

to

+06

00

TRE



LVL

:

–06

to

+06

00

)

PRO EQ

(For

KD-R961BT

)

1

USER1

/

USER2

:Select a preset name.

2

BASS

/

MID BASS

/

MID

/

MID HIGH

/

HIGH

:Select a sound tone.

3

Adjust the sound elements of the selected sound tone.

BASS

Frequency:

63

/

80

/

100

/

125HZ

(

Default:

80HZ

Level:

–10

to

+10

00

Q:

Q1.0

/

Q1.25

/

Q1.5

/

Q2.0

Q1.25

)

MID BASS

Frequency:

200

/

250

/

315

/

400HZ

(Default:

250HZ

Level:

–10

to

+10

00

Q:

Q1.0

/

Q1.25

/

Q1.5

/

Q2.0

Q1.25

)

MID

Frequency:

630/ 800HZ

/

1.0

/

1.25KHZ

(Default:

800HZ

Level:

–10

to

+10

00

Q:

Q0.75

/

Q1.0

/

Q1.25

/

Q2.0

Q1.0

)

MID HIGH

Frequency:

2.0

/

2.5

/

3.15

/

4.0KHZ

(Default:

2.5KHZ

Level:

–10

to

+10

00

Q:

Q0.75

/

Q1.0

/

Q1.25

/

Q2.0

Q1.0

)

HIGH

Frequency:

6.3

/

8.0

/

10.0

/

12.5KHZ

(Default:

8.0KHZ

Level:

–10

to

+10

00

Q:

Q0.75

/

Q1.0

/

Q1.25

/

Q2.0

Q1.0)

PRO EQ

(For

KD-R864BT

/

KD-R862BT

/

KD-R861BT

)

1

USER1

/

USER2

:Select a preset name.

2

BASS

/

MIDDLE

/

TREBLE

:Select a sound tone.

3

Adjust the sound elements of the selected sound tone.

BASS

Frequency:

60

/

80

/

100

/

200HZ

(

Default:

80HZ

Level:

–06

to

+06

00

Q:

Q1.0

/

Q1.25

/

Q1.5

/

Q2.0

Q1.0

)

MIDDLE

Frequency:

0.5

/

1.0

/

1.5

/

2.5KHZ

(Default:

1.0KHZ

Level:

–06

to

+06

00

Q:

Q0.75

/

Q1.0

/

Q1.25

)

TREBLE

Frequency:

10.0

/

12.5

/

15.0

/

17.5KHZ

(Default:

10.0KHZ

Level:

–06

to

+06

00

Q:

QFIX

)

AUDIO

BASS

BOOST

+01

/

+02

: Selects your preferred bass boost level.;

OFF

:Cancels.

LOUD 01

/

02

:Boosts low or high frequencies to produce a well-balanced sound at

low volume.;

OFF

:Cancels.

SUB.W

LEVEL

*

1

SPK-OUT

*

2

00

to

+06

(

+03

):Adjusts the output level of the subwoofer

connected via speaker lead. (



16

)

PRE-OUT

*

3

*

4

–08

to

+08

(

00

):Adjusts the output level of the subwoofer

connected to the lineout terminals (REAR/SW) through an

external amplifier. (



16

)

SUB.W

*

3

*

4

ON

/

OFF

: Turns on or off the subwoofer output.

SUB.W

LPF

*

1

THROUGH

:All signals are sent to the subwoofer. ;

LOW



55HZ

/

MID



85HZ

/

HIGH120HZ

:Audio signals with frequencies lower than 55Hz/ 85Hz/

120Hz are sent to the subwoofer.

JS_JVC_KD_R961BT_E_EN_20_1.indd 15JS_JVC_KD_R961BT_E_EN_20_1.indd 15 20/10/2014 11:08:56 AM20/10/2014 11:08:56 AM

16

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

SPK/PRE OUT

Connection via lineout terminals

(



25

)

(For

KD-R961BT

)

Setting

Lineout terminal

FRONT REAR SW

REAR/REAR

Front speakers output Rear speakers output Subwoofer output

REAR/SUB.W

———

SUB.W/SUB.W

Front speakers output L (left): Subwoofer output

R (right): (Mute)

Subwoofer output

(For

KD-R864BT

/

KD-R862BT

/

KD-R861BT

)

Setting

Lineout terminal

REAR/SW

REAR/REAR

Rear speakers output

REAR/SUB.W

Subwoofer output

SUB.W/SUB.W

Subwoofer output

Connection via speaker leads ( 

25

)

Setting

Rear speaker lead

L (left) R (right)

REAR/REAR

Rear speakers output Rear speakers output

REAR/SUB.W

Rear speakers output Rear speakers output

SUB.W/SUB.W

Subwoofer output (Mute)

If [

SUB.W/SUB.W

] is selected:

– [

HIGH120HZ

] is selected in [

SUB.W



LPF

] and [

THROUGH

] is not available.

– [

R01

] is selected in [

FADER

] and selectable range is [

R06

]to [

00

]

AUDIO SETTINGS

SUB.WPHASE

*

1

REVERSE

(180°)/

NORMAL

(0°):Selects the phase of the subwoofer

output to be in line with the speaker output for optimum performance.

(Selectable only if a setting other than [

THROUGH

] is selected for

[

SUB.W



LPF

].)

HPF

(For

KD-R961BT

)

OFF

:All signals are sent to the front/rear speakers.;

LOW



100HZ

/

MID



120HZ

/

HIGH150HZ

:Audio signals with frequencies lower than

100Hz/ 120Hz/ 150Hz are cut off from the front/rear speakers.

FADER R06

—

F06

(

00

):Adjusts the front and rear speaker output balance.

BALANCE

*

5

L06

—

R06

(

00

):Adjusts the left and right speaker output balance.

VOL

ADJUST –05

—

+05

(

00

):Presets the volume adjustment level of each source

(compared to the FM volume level). Before adjustment, select the source

you want to adjust. (“VOLADJFIX” appears if FM is selected.)

AMP

GAIN LOW



POWER

:Limits the maximum volume level to 30. (Select if the

maximum power of each speaker is less than 50W to prevent damaging

the speakers.);

HIGHPOWER

:The maximum volume level is 50.

D.T.EXP

(Digital Track

Expander)

ON

:Creates realistic sound by compensating the high-frequency

components and restoring the rise-time of the waveform that are lost in

audio data compression.;

OFF

:Cancels.

SPK/PRE



OUT

Selects the appropriate setting to get the desired output.

*

1

Displayed only when [

SUB.W

] is set to [

ON

]. ( 

15

)

*

2

Displayed only when [

SPK/PRE



OUT

] is set to [

SUB.W/SUB.W

].

*

3

For unit with 3-pair lineout terminals: Displayed only when [

SPK/PRE



OUT

] is set to

[

REAR/REAR

] or [

SUB.W/SUB.W

].

*

4

For unit with 1-pair lineout terminals: Displayed only when [

SPK/PRE



OUT

] is set to

[

REAR/SUB.W

] or [

SUB.W/SUB.W

].

*

5

This adjustment will not affect the subwoofer output.

JS_JVC_KD_R961BT_E_EN_20_1.indd 16JS_JVC_KD_R961BT_E_EN_20_1.indd 16 20/10/2014 11:09:16 AM20/10/2014 11:09:16 AM

ENGLISH

17

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

KD-R864BT / KD-R862BT / KD-R861BTKD-R961BT

1 Press and hold .

2 Turn the volume knob to make a selection (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press .

Default:

XX

DISPLAY

DIMMER

Selects the display and button illumination adjusted in the [

BRIGHTNESS

]

setting.

OFF

:Selects the day adjustments.;

ON

:Selects the night adjustments.;

DIMMER TIME

:Adjusts the dimmer on and off time.

Turn the volume knob to adjust the [

ON

] time, then press the knob.

Turn the volume knob to adjust the [

OFF

] time, then press the knob.

(Default: [

ON

]: 18:00 or 6:00 PM

[

OFF

]: 6:00 or 6:00 AM)

AUTO

:Changes between the day and night adjustments when you turn off or

on the car headlights. *

1

For

KD-R961BT

, the display and button colors change according to the

settings made on [

COLOR

].

DISPLAY SETTINGS

BRIGHTNESS

Sets the button, display and USB input terminal brightness for day and

night separately.

1

DAY

/

NIGHT

:Select day or night.

2

Select a zone for setting.

( Illustration on left)

3

Set the brightness level (

00

to

31

).

(Default:

KD-R961BT

:

DAY

:

31

;

NIGHT

:

11

KD-R864BT

/

KD-R862BT

/

KD-R861BT

:

BUTTONZONE

:

DAY

:

25

;

NIGHT

:

09

DISPZONE

:

DAY

:

31

;

NIGHT

:

12

)

SCROLL

*

2

ONCE

:Scrolls the display information once.;

AUTO

:Repeats scrolling at

5-second intervals.;

OFF

:Cancels.

COLOR

(for

KD-R961BT

)

PRESET

You can select a color for [

ALLZONE

], [

ZONE1

], [

DISPZONE

], or [

ZONE2

]

separately. For [

ALL ZONE

], you can also select a color pattern.

Default color:

ALLZONE

: [

COLOR06

],

ZONE 1

: [

COLOR06

],

DISPZONE

: [

COLOR01

],

ZONE 2

: [

COLOR27

]

1

Select a zone for setting.

( Illustration on left)

2

Select a color for the selected zone.

•

COLOR01

to

COLOR29

•

USER

: The color you have created for [

DAYCOLOR

] or

[

NIGHTCOLOR

] is shown.

•

COLORFLOW01

to

COLORFLOW03

: Color changes at different

speeds.

•

GROOVE

/

TECHNO

/

EMOTION

/

RELAX

/

SPECTRUM

/

SWEEP

/

POP

: The selected color pattern is shown.*

3

(Selectable only when

[

ALLZONE

] is selected in step



1

.)

*

1

The illumination control wire connection is required.

( 25)

*

2

Some characters or symbols will not be shown correctly (or will be blanked).

*

3

If one of these color pattern is selected, the [

ZONE1

], [

DISPZONE

], [

ZONE2

] illumination

color will change to the default color.

JS_JVC_KD_R961BT_E_EN_20_1.indd 17JS_JVC_KD_R961BT_E_EN_20_1.indd 17 20/10/2014 11:09:31 AM20/10/2014 11:09:31 AM

18

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

About discs and audio files

• This unit can only play the following CDs:

• This unit can play back multi-session discs; however, unclosed sessions will be skipped

during playback.

•

Unplayable discs:

- Discs that are not round.

- Discs with coloring on the recording surface or discs that are dirty.

- Recordable/ReWritable discs that have not been finalized.

- 8 cm CD. Attempting to insert using an adapter may cause malfunction.

•

DualDisc playback:

The Non-DVD side of a “DualDisc” does not comply with the “Compact

Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product

cannot be recommended.

•

Playable files:

- File extensions: MP3(.mp3), WMA(.wma), AAC (.m4a)

- Bit rate: MP3: 8kbps — 320kbps

WMA: 32kbps — 192kbps

AAC: 8kbps — 320kbps

- Sampling frequency:

MP3: 48kHz, 44.1kHz, 32kHz, 24kHz, 22.05kHz, 16kHz, 12kHz, 11.025kHz, 8kHz

WMA: 8kHz — 48kHz

AAC: 8kHz — 48kHz

- Variable bit rate (VBR) files.

•

Maximum number of characters for file/folder name:

It depends on the disc format used (includes 4 extension characters—<.mp3>, <.wma> or

<.m4a>).

- ISO 9660 Level 1 and 2: 32 characters

- Romeo: 32 characters

- Joliet: 32 characters

- Windows long file name: 32 characters

MORE INFORMATION

DAYCOLOR

Store your own day and night colors for different zone.

1

Select a zone for setting.

( 17)

2

RED

/

GREEN

/

BLUE

:Select a primary color.

3

00

to

31

:Select the level.

Repeat steps

2

and

3

for all the primary colors.

• Your setting is stored to [

USER

] in [

PRESET

].

• If [

00

] is selected for all primary colors for [

DISPZONE

], nothing

appears on the display.

NIGHTCOLOR

COLOR GUIDE

ON

:Changes the button, display, USB input terminal and auxiliary input

jack illumination when settings are performed on menu and list search.

Display zone will automatically change depending on volume level.;

OFF

:Cancels.

[

NIGHTCOLOR

] or [

DAYCOLOR

] is changed by turning on or off your car’s

headlight.

DISPLAY SETTINGS

JS_JVC_KD_R961BT_E_EN_1.indd 18JS_JVC_KD_R961BT_E_EN_1.indd 18 23/7/2014 1:45:18 PM23/7/2014 1:45:18 PM

La page charge ...

JVC KW-R961BT Manuel utilisateur

Ce manuel convient également à

JVC KW-R961BT Manuel utilisateur

dans d''autres langues

Documents connexes