KitchenAid KGCP462KSS02 Le manuel du propriétaire

Marque: KitchenAid

Modèle: KGCP462KSS02

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Ce manuel convient également à

|itch _nAid ®

COMMERCIAL STYLE GAS COOKTOP

For questions about features, operation/performance, parts accessories or service, call: 1-800-422-1230

In Canada, call for assistance 1-800-461-5681, for installation and service, call: 1-800-807-6777 or visit our website at...

www.kitchenaid.com or www.KitchenAid.ca

TABLE DE CUISSON A GAZ STYLE COMMERCIAL

Au Canada, pour assistance composez le 1-800-461-5681, pour installation ou service composez le 1-800-807-6777 ou visitez notre site web &...

www.KitchenAid.ca

Table of Contents/Table des matieres ............................................................................. 2

Models/ModelesKGCP462 KGCP463 KGCP467 KGCP482 KGCP483 KGCP484 KGCP487

8285588

TABLE OF CONTENTS

COOKTOP SAFETY .................................................................... 3

PARTS AND FEATURES ............................................................ 5

COOKTOP USE ........................................................................... 7

Cooktop Controls ......................................................................... 7

Surface Burners ........................................................................... 8

Simmer Plate ................................................................................ 8

GRILLE ........................................................................................ g

GRIDDLE ................................................................................... 11

Home Canning ........................................................................... 12

Cookware ................................................................................... 12

COOKTOP CARE ...................................................................... 13

General Cleaning ........................................................................ 13

TILE BEZEL FEATURE ............................................................. 15

TROUBLESHOOTING .................................................................. 16

ASSISTANCE OR SERVICE ......................................................... 17

WARRANTY .............................................................................. 18

TABLE DES MATIERES

SECURIT¢: DE LA TABLE DE CUISSON ................................. 20

PIECES ET CARACTERISTIQUES ........................................... 22

UTILISATION DE LA TABLE DE CUISSON ............................. 24

Commandes de la table de cuisson .......................................... 24

BrQleurs de surface .................................................................... 25

Plaque de mijotage ..................................................................... 25

GRIL ........................................................................................... 26

PLAQUE ._,FRIRE ..................................................................... 28

Preparation de conserves a la maison ....................................... 29

Ustensiles de cuisson ................................................................ 29

ENTRETIEN DE LA TABLE DE CUISSON ............................... 30

Nettoyage gen6ral ...................................................................... 30

CARACTC:RISTIQUE DE L'ENCADREMENT

._,CARREAUX ............................................................................ 32

DEPANNAGE ............................................................................. 33

ASSISTANCE OU SERVICE ......................................................... 34

GARANTI E ..................................................................................... 35

COOKTOP SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all

safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or

"WARNING." These words mean:

You can be killed or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you

what can happen if the instructions are not followed.

I WARNING: If the information in this manual is not followed exactly, a fire or explosion I

may result causing property damage, personal injury or death,

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch.

• Do not use any phone in your building.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, ebctrbaH

shock, injury to persons, or damage when using the

cooktop, foflow basic precautions, inciuding the

foflowing:

m CAUTRON: Do not store items of interest to

chiidren in cabinets above the cooktop - chiidren

ciimbing on the cooktop to reach items couid be

seriously injured,

m Proper Installation - The cooktop, when installed,

must be electrically grounded in accordance with

local codes or, in the absence of local codes, with

the National Electrical Code, ANS//NFPA 70 or the

Canadian Electrical Code, Part 1. Be sure the

cooktop is properiy instafled and grounded by a

qualified technician.

m This cooktop is equipped with a three-prong

grounding piug for your protection against shock

hazard and shouid be piugged directly into a properly

grounded receptacle. Do not cut or remove the

grounding prong from this plug.

m Disconnect the electrical supply before servicing

the cooktop,

m Never Use the Cooktop for Warming or Heating the

Room,

m injuries may result from the misuse of the cooktop

such as stepping, leaning, or sitting on the top

surface,

,, Maintenance - Keep cooktop area clear and free

from combustible materials, gasoline, and other

flammable vapors and liquids,

m Storage on the cooktop - Flammable materials

should not be stored on or near surface units,

,, Top burner flame size should be adjusted so it does

not extend beyond the edge of the cooking utensil,

SAVE THESE INSTRUCTIONS

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list

of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and

requires businesses to warn of potential exposure to such substances,

WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or

other reproductive harm,

This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde,

carbon monoxide, toluene, and soot,

PARTS AND FEATURES

This manual covers several different models. The cooktop you have purchased may have some or all of the items listed. The locations

and appearances of the features shown here may not match those of your model.

48 in.(121.9 cm) Cooktop

Stainless Steel Backguard

Island Trim not shown)

Surface Burner Grate

Surface Burner

Grille (on some models)

Surface Burner Marker

Griddle

(on some models)

Control Panel

48 in. (121.9 cm) Control Panels

1 2

1. Left Rear Control Knob (15K BTU)

2. Left Front Control Knob (6K BTU)

3. Center Left Rear Control Knob

(15K BTU)

4. Center Left Front Control Knob

(15K BTU)

5. Center Right Rear Control Knob

(15K BTU)

7 8

6. Center Right Front Control Knob

(15K BTU)

7. Right Rear Control Knob (15K BTU)

8. Right Front Control Knob (6K BTU)

Left Rear Control Knob (15K BTU)

Left Front Control Knob (6K BTU)

3 4

Grille Control Knob (18K BTU)

Center Right Rear Control Knob

(15K BTU)

Center Right Front Control Knob

(15K BTU)

Griddle Control Knob (15K BTU)

1 2

1. Left Rear Control Knob (15K BTU)

2. Left Front Control Knob (6K BTU)

3 4

Center Left Rear Control Knob

(15K BTU)

Center Left Front Control Knob

(15K BTU)

5. Grille Control Knob (18K BTU)

6. Right Rear Control Knob (15K BTU)

7. Right Front Control Knob (6K BTU)

1 2

1. Left Rear Control Knob (15K BTU)

2. Left Front Control Knob (6K BTU)

4 5

Center Left Rear Control Knob

(15K BTU)

Center Left Front Control Knob

(15K BTU)

i [

6 7

5. Griddle Control Knob (15K BTU)

6. Right Rear Control Knob (15K BTU)

7. Right Front Control Knob (6K BTU)

36 in. (9t.4 cm) Cooktop

1 ...............................................

1. Surface Burner

2. Surface Burner Grate

3. Tile Bezel Assembly

(on some models)

36 in. (91.4 cm) Control Panels

4. Surface Burner Marker

5. Stainless Steel Backguard

(Island Trim not shown)

6. Grille or Griddle

(on some models)

7. Control Panel

1 2

1. Left Rear Control Knob (15K BTU)

2. Left Front Control Knob (6K BTU)

@©

...... iI

3 4

3. Center Rear Control Knob (15K BTU)

4. Center Front Control Knob (15K BTU)

©@

il .......

5 6

5. Right Rear Control Knob (15K BTU)

6. Right Front Control Knob (6K BTU)

1 2

1. Left Rear Control Knob (15K BTU)

2. Left Front Control Knob (6K BTU)

3. Griddle Control Knob (15K BTU)

4 5

4. Right Rear Control Knob (15K BTU)

5. Right Front Control Knob (6K BTU)

1 2

1. Left Rear Control Knob (15K BTU)

2. Left Front Control Knob (6K BTU)

3. Grille Control Knob (18K BTU)

4 5

4. Right Rear Control Knob (15K BTU)

5. Right Front Control Knob (6K BTU)

COOKTOP USE

Fire Hazard

Do not let the burner flame extend beyond the

edge of the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in

death or fire.

IMPORTANT: Your cooktop is factory set for use with Natural

Gas. If you wish to use L.P. Gas, an L.P. Gas Conversion Kit is

included with your new range. See the instructions included with

the L.R Gas Conversion Kit for details on making this conversion.

Electric igniters automatically light the surface burners when

control knobs are turned to LITE.

The large burners (15,000 BTU [British Thermal Units]) provide

the highest heat setting, and are ideal for cooking large quantities

of food or liquid, using large pots and pans. The small burners

(6,000 BTU) allow more accurate simmer control at the lowest

setting, and are ideal for cooking smaller quantities of food, using

smaller pots and pans.

Before setting a control knob, place filled cookware on the grate.

Do not operate a burner while using empty cookware or without

any cookware on the grate.

NOTE: Visually check that the burner has lit. If the burner does

not ignite, listen for the clicking sound. If you do not hear the

igniter click, TURN THE BURNER OFR Check for a tripped circuit

breaker or blown fuse.

Check that the control knob is pressed completely down on the

valve shaft. If the spark igniter still does not operate, call atrained

repair specialist.

Proper grounding and polarity are necessary for correct operation

of the electric ignition system. If the wall receptacle does not

provide correct polarity, the igniter will become grounded and

occasionally click, even after the burner has ignited. Contact a

trained repair specialist to check the wall receptacle to see

whether it is wired with the correct polarity.

To Set:

1. Push in and turn knob counterclockwise to LITE.

All surface burners will click. Only the burner with the control

knob turned to LITE will produce a flame.

2. Turn knob anywhere between HI and LO. Use the following

chart as a guide when setting heat levels.

SETTING RECOMMENDED USE

MTE • Light the burner.

HI • Start food cooking.

• Bring liquid to a boil.

MED to HI • Hold a rapid boil.

• Quickly brown or sear food.

MED • Fry or saute foods.

• Hold a slow boil.

MED to LO • Cook soups, sauces and gravies,

• Stew or steam foods.

LO • Keep food warm.

• Melt chocolate or butter.

• Simmer.

I REMEMBER: When cooktop is in use, the entire cook-

top area may become hot,

IMPORTANT: Do not obstruct the flow of combustion and

ventilation air around the burner grate edges.

Before cleaning, make sure all controls are off and the oven and

cooktop are cool. Do not use oven cleaners, bleach or rust

removers,

Burner cap: Always keep the burner cap in place when using a

surface burner. A clean burner cap will help prevent poor ignition

and uneven flames. Always clean the burner cap after a spillover

and routinely remove and clean the caps according to the

"General Cleaning" section.

Y \

1.Burner cap

2. Burner base

3. Alignment pins

4. Igniter

5. Gas tube opening

Gas tube opening: Gas must flow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil

and do not allow spills, food, cleaning agents or any other

material to enter the gas tube opening. Protect it from spillovers

by always using a burner cap.

!. 1-1V*in. (25-38mm)

2. Burner ports

Burner ports: Check burner flames occasionally for proper size

and shape as shown above. A good flame is blue in color, not

yellow. Keep this area free of soil and do not allow spills, food,

cleaning agents or any other material to enter the burner ports.

To Clean:

1. Remove the burner cap from the burner base and clean

according to "General Cleaning" section.

2. Clean the gas tube opening with a damp cloth.

3. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden

toothpick. If the burner needs to be adjusted, contact a

trained repair specialist.

4. Replace the burner cap, making sure the alignment pins on

the cap are properly aligned with the burner base.

1. Incorrect

2. Correct

Turn on the burner. Ifthe burner does not light, check cap

alignment. Ifthe burner still does not light, do not service the

sealed burner yourself. Contact atrained repair specialist.

The Simmer Plate is made of aluminum to evenly spread the heat

over the bottom of cookware. It can be used on the large surface

burners.

Do not use the Simmer Plate above the medium setting. For best

results, use the Simmer Plate with burner settings in the medium

to low range on the cooktop when lower temperatures are

needed for simmering, or for maintaining food at a low

temperature over an extended period of time.

Channels on the bottom of the Simmer Plate have been designed

so it fits properly and securely over the grate.

See "Assistance or Service" section to order extra Simmer

Plates.

GRILLE

1. Grille Grate 3. Wave Plate 5. Front Spill Guard

2. Wave Tray 4. Burner Assembly 6. Drip Tray

The grille module consists of a cast-iron grate, a wave tray, a

wave plate, a burner assembly, a front spill guard and a drip tray.

It is used to grill foods. Refer to the "Grille Chart" for cook times

and settings.

When using the grille, follow the guidelines below.

• Do not leave the grille unattended while cooking.

• Do not use aluminum foil, charcoal or wood chips.

• Trim excess fat to reduce spattering. Slit the remaining fat on

the edges to prevent curling.

• Allow space between food on the grille. Crowding food will

result in uneven cooking.

• Use a metal spatula or tongs to turn food.

• Steaks, chops and hamburgers should be turned only once

to prevent loss of juices.

• For even cooking, foods such as chicken quarters should be

turned several times.

• To check for doneness of meats and poultry, use an instant

read thermometer or make a small cut in the center of the

food. This will prevent loss of juices.

Before removing or replacing grille, make sure the control knobs

are turned to OFF. Allow the grille to cool completely before

handling.

To Remove:

1. Remove grille grate.

2. Remove wave tray and wave plate.

3. Remove burner assembly.

4. Remove front spill guard.

5. Remove drip tray.

6. Clean basin. See "General Cleaning" section.

To Replace:

1. Lift burner assembly out of basin and set aside.

2. Place drip tray on bottom of grille basin and slide the tray

forward so that it is located side to side and against the

locating feet of the rear spill guard.

Place the wave plate on the wave tray, The wave plate must

be centered on the wave tray.

1. Rear spill guard

2. Locating feet

3. Drip tray

Insert the front spill guard feet into the slots in the rear spill

guard. The rear flange will rest on the burner box.

1. Front spill guard

2. Feet and slots

4. Place burner assembly over spill guard, making sure burner's

rear flange is seated in slot.

5. Install the wave tray into the grille. The tab in the left rear

corner of the bay must fit through the slot in the left rear

corner of the wave tray.

1. Slot for locating tab

2. Locating tab

1. Wave tray

2. Wave plate

7. Replace grille grate.

To Use:

1. Turn on overhead range hood.

2. If desired, apply a light coating of vegetable oil or nonstick

cooking spray to grille grate.

3. Push in and turn knob to LITE/HI. The flame will ignite in 30 to

40 seconds. Allow grille to preheat for 10 minutes.

4. Turn knob to desired cook setting. Place food on grille.

GRILLE CHART

The settings and times are guidelines only and may need to be

adjusted for individual tastes.

FOOD SETTING COOK

TIME

TOTAL

MINUTES

Steak

1 in, (2.5 cm)

medium MED-HI 16-20

well done MED-HI 20-30

Ground Meat Patties

1/2-3/4in. (1.3-1.9 cm) MED 20-25

Pork Chops

1 in. (2.5 cm) MED 35-55

Ham Slices

1/2in. (1.2 cm) MED-HI 8-12

Frankfurters and MED 8-15

Precooked Sausages

Chicken

Quarters MED-LO 50-80

Breasts, boneless MED 20-40

Fish Steaks

3/4-1in. (1.9-2.5 cm) MED 10-15

GRIDDLE

1. Griddle

2. Drip Tray

The griddle is a built-in unit made of polished steel and comes

with a drip tray. It is shipped with a protective coating covered

with paper to prevent rust from occurring and must be removed

before using. See the "First Time Use" section for more

information about using the griddle.

• Do not use cookware on the griddle.

• Do not pour cold water on a hot griddle. This may warp the

griddle, producing an uneven cooking surface.

• The griddle must be level to operate properly.

• The griddle should be preheated before cooking most foods.

Refer to recipe or package instructions.

• Remove and clean the grease tray and the area below after

each use.

• After each cleaning, wipe the griddle surface with a light film

of cooking oil to protect the finish from rust and corrosion. Do

not use corn oil.

• Cooking on the griddle will change the color and appearance

of the surface. It is normal for the griddle surface to become

brown and darken with use.

Before cleaning the griddle, turn control knobs to OFF and allow

griddle to cool.

First Time Use:

1. Remove the paper from the griddle.

2. Completely remove the protective coating from the surface

with warm soapy water and a soft cloth or sponge. Rinse and

dry.

3. Pour 1 tsp (5 mL) of vegetable oil onto the center of the

griddle and spread evenly over the entire surface with a paper

towel.

The griddle is ready for use. This is necessary to help prevent

food from sticking.

To Use:

1. Push in and turn knob to LITE/HI. The flame will ignite in 30 to

40 seconds. Allow griddle to preheat for 10 minutes. Place

food on griddle.

2. If preheating is not required, start cooking food at desired

temperature setting.

GRIDDLE CHART

The settings and times are guidelines only and may need to be

adjusted for individual tastes.

FOOD SETTING COOK TIME

TOTAL MINUTES

Sausage Patties 325 °F (163°C) 12-18

and Links

Bacon Slices 350°F (177°C) 7-11

Ham Steaks 325°F (163°C) 5-7

(fully cooked)

Ground Meat 350°F (177°C) 10-15

Patties

Frankfurters and 325 °F (163°C) 8-15

Precooked

Sausages

Fish Steaks, 325°F (163°C) 8-15

Fillets

Eggs 300°F (149°C) 3-5

Hash Brown 400°F to 425°F 8-12

Potatoes (204°C to 218°C)

French Toast 350°F (177°C) 5-7

Pancakes 350°F (177°C) 2-4

Grilled 325°F (163°C) 3-5

Sandwiches

When canning for long periods, alternate the use of surface

cooking areas, elements or surface burners between batches.

This allows time for the most recently used areas to cool.

• Center the canner on the grate or largest surface cooking

area or element. Canners should not extend more than 1 in.

(2.5 cm) outside the cooking area.

• Do not place canner on two surface cooking areas, elements

or surface burners at the same time.

For more information, contact your local U.S. Government

Agricultural Department Extension Office. In Canada, contact

Agriculture Canada. Companies that manufacture home

canning products can also offer assistance.

IMPORTANT: Never leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a flat bottom, straight sides, a well-

fitting lid and the material should be of medium-to-heavy

thickness.

Rough finishes may scratch the cooktop. Aluminum and copper

may be used as a core or base in cookware. However, when used

as a base it can leave permanent marks on the cooktop or grates.

Cookware material is afactor in how quickly and evenly heat is

transferred, which affects cooking results. A nonstick finish has

the same characteristics as its base material. For example,

aluminum cookware with a nonstick finish will take on the

properties of aluminum.

Use the following chart as a guide for cookware material

characteristics.

COOKWABE CHARACTERISTICS

Aluminum • Heats quickly and evenly.

• Suitable for all types of cooking.

• Medium or heavy thickness is best for

most cooking tasks.

Cast iron • Heats slowly and evenly.

• Good for browning and frying.

• Maintains heat for slow cooking.

Ceramic or • Follow manufacturer's instructions.

Ceramic glass • Heats slowly, but unevenly.

• Ideal results on low to medium heat

settings.

Copper • Heats very quickly and evenly.

Earthenware • Follow manufacturer's instructions.

• Use on low heat settings.

Porcelain • See stainless steel or cast iron.

enamel-

on-steel or

cast iron

Stainless steel • Heats quickly, but unevenly.

• A core or base of aluminum or copper

on stainless steel provides even

heating.

COOKTOP CARE

IMPORTANT: Before cleaning, make sure all controls are off and

the cooktop is cool. Always follow label instructions on cleaning

products.

Soap, water and a soft cloth or sponge are suggested first unless

otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire appliance is cool. These spills

may affect the finish.

• Glass cleaner, mild liquid cleaner or nonabrasive scrubbing

pad:

Gently clean around the model and serial number plate

because scrubbing may remove numbers.

STAINLESS STEEL

Do not use soap-filled scouring pads, abrasive cleaners, Cooktop

Polishing Creme, steel-wool pads, gritty washcloths or some

paper towels. Damage may occur.

Rub in direction of grain to avoid damaging.

• Stainless Steel Cleaner & Polish:

See "Assistance or Service" section to order.

• Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

• Vinegar for hard water spots

PORCELAIN-COATED GRATES AND CAPS

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the cooktop, grates and caps are cool.

These spills may affect the finish.

To avoid chipping, do not bang grates and caps against each

other or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet.

Do not clean in the Self-Cleaning cycle.

Do not clean in dishwasher.

• Nonabrasive pad and mildly abrasive cleanser:

Clean as soon as cooktop, grates and caps are cool.

SURFACE BURNERS

Sealed Burner models

See "Surface Burners" section.

CONTROL KNOBS

Do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs.

When replacing knobs, make sure knobs are in the Off position.

On some models, do not remove seals under knobs.

NOTE: When replacing knobs after cleaning either the surface

burner controls or the grille module control, make sure the knobs

are replaced to the correct location. For example, the knobs for

the surface burner controls will read "LITE," while the knob for

the grill will read "LITE/HI."

• Soap and water or dishwasher:

Pull knobs straight away from control panel to remove.

CONTROL PAN EL

Do not use abrasive cleaners, steel-wool pads, gritty washcloths

or some paper towels. Damage may occur.

• Soap and water.

Wash, rinse and dry with a soft cloth.

• Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on

panel.

SIMMER PLATE

Do not clean in dishwasher.

• Liquid detergent and water.

Wipe with damp cloth or sponge then rinse with clean water

and wipe dry.

• Mild-abrasive cleanser

Rub in the direction of the grain lines with a damp cloth or

sponge. Rinse thoroughly. Repeat if necessary.

TILE BEZEL

• Soap and water.

Wash, rinse and dry with a soft cloth.

• Glass cleaner.

Apply glass cleaner to soft cloth or sponge, not directly on tile

bezel assembly.

GRILLE MODULE

For more information, see "Grille" section.

Do not use oven cleaners, metal brushes, abrasive scouring pads

or other scrubbers made to clean outdoor grilles.

Grille Grate

Do not clean grille grate in dishwasher.

Do not clean in a self-cleaning oven.

• Clean the grille grate shortly after cooking is completed and

the burner has been turned off.

• While still warm, use a soft bristle barbecue brush to scrub

the grille grate. Oven mitts may be worn while cleaning.

• For thorough cleaning of the grille grate, soak in warm, soapy

water for 30 minutes. After soaking, scrub with nonabrasive

pad.

Wave Tray and Wave Plate

• Soak in warm, soapy water to loosen soil. After soaking,

scrub with a nonabrasive pad.

• Oven cleaner.

Burner Assembly

Do not soak in water.

• Soap and water or nonabrasive cleanser.

• Damp cloth or nonabrasive pad.

Front Spill Guard and Drip Tray

Allow cooktop to cool completely before cleaning.

• Soap and water or nonabrasive cleanser.

• Damp cloth or nonabrasive pad.

Module Basin

• Warm, soapy water.

• Nonabrasive pad or sponge.

• For heavy soil, soak paper towels in household cleanser and

lay them on the soil for at least 30 minutes. After soaking,

scrub with a nonabrasive pad.

GRIDDLE MODULE

Clean the griddle shortly after removing food and the burner has

been turned off.

Use a metal spatula to scrape reside into the drip tray. To

avoid damaging the surface, always rub in the direction of the

polish lines. If necessary, scrub the griddle surface with a

nonabrasive pad and a little cooking oil or use a griddle

screen cleaner (not supplied with this unit).

• Hot, soapy water and/or plastic scrub pad.

• After cleaning, dry surface with a soft cloth or sponge. To

protect the finish and prevent rust, wipe the entire surface

with a light film of cooking oil.

Drip Tray and Area Under Tray

Allow cooktop to cool completely before cleaning.

• Soap and water or nonabrasive cleanser.

• Damp cloth or nonabrasive pad.

TILEBEZEL FEATURE

The Tile Bezel feature allows you to insert decorative tiles into the bezel assembly. This allows you to coordinate the tiles in the bezel

with the tiles in your kitchen. To order additional Tile Bezels, see "Assistance or Service" section.

2 3

4 5

1. Pre-BezelAssembly 3. Cardboard 5. Foam Tape

2. Tile 4. Tile Bezel 6. Final Bezel Assembly

To Insert Using a 41/4in. (10.8 cm) tile

Before inserting the tile, remove tile bezels from accessory box

and unwrap.

1. Remove the piece of square cardboard from inside the bezel

and save.

2. Insert your tile into the bezel with decorative side facing the

front.

3. Depending on the thickness of the tile, use the cardboard or

the foam tape. Either option will require peeling the backing

off the tape and attaching to the tile.

If you are using cardboard, be sure to center on the tile.

Reattach assembly to control panel by lining up holes on

back of bezel over screws on the control panel, and push

down firmly until it is in place.

To Insert Using a 37/Bin. (9.8 cm) tile

Before inserting the tile, remove tile bezels from accessory box

and unwrap.

1. Remove the piece of square cardboard from inside the bezel

and save.

2. Peel backing from foam tape and adhere to inside vertical

surfaces of tile bezel.

3. Insert your tile, decorative side facing the front, into one

corner of the bezel and apply some pressure which will

compress the foam tape and allow the other end of the tile to

drop in.

4. Depending on the thickness of the tile, use the cardboard or

the foam tape. Either option will require peeling the backing

off the tape and attaching to the tile.

If you are using the cardboard, be sure to center on the tile.

5. Reattach assembly to control panel by lining up holes on

back of bezel over screws on the control panel, and push

down firmly until it is in place.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the

cost of an unnecessary service call.

Nothing will operate

• Has a household fuse blown or has the circuit breaker

tripped?

Replace the fuse or reset the circuit.

Surface burners will not operate

• Is this the first time the surface burners have been used?

Turn on any one of the surface burner knobs to release air

from the gas lines.

• Is the control knob set correctly?

Push in knob before turning to a setting.

• Are the burner ports clogged?

On sealed burner models, see "Surface Burners" section.

Surface burner flames are uneven, yellow and/or noisy

• Are the burner ports clogged?

On sealed burner models, see "Surface Burners" section.

On models with caps, are the burner caps positioned

properly?

See "Surface Burners" section.

• Is the burner damaged?

On models with caps, look for a warped cap. If cap will not

spin freely on a fiat surface, painted side down, the cap is

warped. Switch cap with a different surface burner to check

for further warping. Contact a trained repair specialist.

• Is propane gas being used?

The appliance may have been converted improperly.

Contact a trained repair specialist.

Surface burner makes popping noises

• Is the burner wet?

Let it dry.

Burner sparks but does not light

• Is there continuous sparking, but the burner does not

light?

Discontinue use of the surface burner and contact a service

technician,

Excessive heat around cookware on cooktop

• Is the cookware the proper size?

Use cookware about the same size as the surface cooking

area, element or surface burner. Cookware should not extend

more than 1 in. (2,5 cm) outside the cooking area.

Cooktop cooking results not what expected

• Is the proper cookware being used?

See "Cookware" section.

• Is the control knob set to the proper heat level?

See "Cooktop Controls" section.

• Is the appliance level?

Level the appliance. See the Installation Instructions,

Grille and Griddle results not what expected

• Was the grille or griddle preheated?

Preheat grille or griddle. See "Grille" or "Griddle" sections for

more information.

• Is there proper air circulation between foods?

Space food evenly across the grille grates.

• Are foods taking too long to cook?

Partially frozen or very cold foods will increase cooking time.

Thoroughly defrost foods.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If

you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

only use factory specified parts. These factory specified parts will

fit right and work right because they are made with the same

precision used to build every new KITCHENAID ® appliance.

To locate factory specified parts in your area, call our Customer

Interaction Center telephone number or your nearest KitchenAid

designated service center.

Call the KitchenAid Customer Interaction Center toll free:

1-600-422-1230.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Installation information.

• Accessory and repair parts sales.

• Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

• Referrals to local dealers, repair parts distributors, and

service companies. KitchenAid designated service

technicians are trained to fulfill the product warranty and

provide after-warranty service, anywhere in the United States.

To locate the KitchenAid designated service company in your

area, you can also look in your telephone directory Yellow

Pages.

For further assistance

If you need further assistance, you can write to KitchenAid with

any questions or concerns at:

KitchenAid Brand Home Appliances

Customer Interaction Center

553 Benson Road

Benton Harbor, MI 49022-2692

Accessories U.S.A.

To order accessories, call the KitchenAid Customer Interaction

Center toll free at 1-800-442-9991 and follow the menu prompts.

Or visit our website at www.kitchenaid.com and click on "Shop-

Online," then "Accessories."

Stainless Steel Cleaner & Polish

(stainless steel models)

Order Part #4396095

Simmer Plate

(on some models)

Order Part #4455109

Tile Bezels

(on some models)

Order Part #8284641

For product related questions, please call the KitchenAid Canada

Customer Interaction Center toll free:

1-600-461-5681 Monday to Friday 8:00 a.m. - 6:00 p.m. (EST).

Saturday 8:30 a.m. - 4:30 p.m. (EST).

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Referrals to local dealers.

For parts, accessories and service in Canada

Call 1-800-807-6777. KitchenAid designated service technicians

are trained to fulfill the product warranty and provide after-

warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to KitchenAid

Canada with any questions or concerns at:

Customer Interaction Center

KitchenAid Canada

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

KITCHENAID COOKTOP, BUILT-IN OVEN AND RANGE WARRANTY

ONE-YEAR FULL WARRANTY

For one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or

furnished with the product, KitchenAid will pay for factory specified parts and repair labor costs to correct defects in materials or

workmanship. Service must be provided by a KitchenAid designated service company.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON ELECTRIC ELEMENTS,

CERAMIC GLASS COOKTOP, GAS BURNERS, PORCELAIN OVEN CAVITY/INNER DOOR,

SOLID STATE TOUCH CONTROL SYSTEM, AND MAGNETRON TUBE

On electric ranges and electric cooktops, in the second through fifth years from the date of purchase, when this appliance is operated

and maintained according to instructions attached to or furnished with the product, KitchenAid will pay for factory specified parts for

any electric element to correct defects in materials or workmanship.

On ceramic glass ranges and ceramic glass cooktops, in the second through fifth years from the date of purchase, when this appliance

is operated and maintained according to instructions attached to or furnished with the product, KitchenAid will pay for factory specified

parts for the ceramic glass cooktop. KitchenAid warrants that the ceramic glass cooktop will not discolor, the cooktop pattern will not

wear off, the rubber seal between the ceramic glass cooktop and porcelain edge will not crack, the ceramic glass cooktop will not crack

due to thermal shock and the surface unit elements will not burn out.

On gas ranges and gas cooktops, in the second through fifth years from the date of purchase, when this appliance is operated and

maintained according to instructions attached to or furnished with the product, KitchenAid will pay for factory specified parts for any

gas burner to correct defects in materials or workmanship.

On ranges and built-in ovens, in the second through fifth years from the date of purchase, when this appliance is operated and

maintained according to instructions attached to or furnished with the product, KitchenAid will pay for factory specified parts for the

porcelain oven cavity/inner door if the part rusts through due to defects in materials or workmanship. KitchenAid will pay for factory

specified parts for solid state touch control system and Magnetron tube in combination ovens to correct defects in materials or

workmanship.

SIXTH THROUGH TENTH YEAR LIMITED WARRANTY ON COMMERCIAL STYLE

RANGES AND BUILT-IN OVENS PORCELAIN OVEN CAVITY/INNER DOOR

On COMMERCIAL STYLE ranges and built-in ovens only, in the sixth through tenth years from date of purchase, when this appliance is

operated and maintained according to instructions attached to or furnished with the product, KitchenAid will pay for factory specified

parts for the porcelain oven cavity/inner door if the part rusts through due to defects in materials or workmanship.

KitchenAid will not pay for:

1. Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace house fuses or

correct house wiring, or to replace owner-accessible light bulbs.

2. Repairs when your appliance is used in other than normal, single-family household use.

3. Pickup and delivery. Your appliance is designed to be repaired in the home.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God or use of products not

approved by KitchenAid or KitchenAid Canada.

5. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

6. Replacement parts or repair labor costs for units operated outside the United States or Canada.

7. In Canada, travel or transportation expenses for customers who reside in remote areas.

8. Any labor costs during the limited warranty periods.

KITCHENAID AND KITCHENAID CANADA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or

province to province.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized KitchenAid dealer to

determine if another warranty applies.

If you need service, first see the "Troubleshooting" section of this book. After checking "Troubleshooting," additional help can be found

by checking the "Assistance or Service" section or by calling the KitchenAid Customer Interaction Center, 1-800-422-1230 (toll-free),

from anywhere in the U.S.A. In Canada, contact your KitchenAid designated service company or call f-800-807-6777. 4/01

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your appliance to

better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can find this information on the model and serial

number label/plate, located on your appliance as shown in the

"Parts and Features" section.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

SECURITE DE LA TABLE DE CUISSON

Votre s6curit6 et celle des autres est tr_s importante.

Nous donnons de nombreux messages de securit6 importants dans ce manuel et sur votre appareil menager.

Assurez-vous de toujours lire tousles messages de securit6 et de vous y conformer.

_ oici le symbole d'alerte de securit&

Ce symbole d'alerte de securit6 vous signale les dangers potentiels de deces et de blessures graves

& vous et & d'autres.

Tousles messages de securit6 suivront le symbole d'alerte de securit6 et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient :

Risque possible de d_c_s ou de blessure grave si

vous ne suivez pas imm_diatement les instructions.

Risque possible de d_c_s ou de blessure grave

si vous ne suivez pas les instructions.

Tousles messages de securit6 vous diront quel est le danger potentiel et vous disent comment reduire le risque de

blessure et ce qui peut se produire en cas de non-respect des instructions.

AVERTISSEMENT : Pour votre s6curit6, les renseignements dans ce manuel doivent

6tre observ6s pour r6duire au minimum les risques d'incendie ou d'explosion ou pour

6viter des dommages au produit, des blessures ou un d6c_s.

- Ne pas entreposer ni utiliser de I'essence ou d'autres vapeurs ou liquides inflammables

proximit6 de cet appareil ou de tout autre appareil 61ectrom6nager.

- QUE FAIRE DANS LE CAS D'UNE ODEUR DE GAZ :

• Ne pas tenter d'allumer un appareil.

• Ne pas toucher a un commutateur 61ectrique.

• Ne pas utiliser le t616phone se trouvant sur les lieux.

• Appeler imm6diatement le fournisseur de gaz d'un t616phone voisin. Suivre

ses instructions.

• .& d6faut de joindre votre fournisseur de gaz, appeler les pompiers.

- L'installation et I'entretien doivent 6tre effectu6s par un installateur qualifi6, une agence

de service ou le fournisseur de gaz.

La page est en cours de chargement...

KitchenAid KGCP462KSS02 Le manuel du propriétaire

Marque: KitchenAid

Modèle: KGCP462KSS02

Catégorie: Cuisinières

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: KitchenAid KGCP462KSS02 Owner's manual

KitchenAid KGCP462KSS02 Le manuel du propriétaire

Ce manuel convient également à

KitchenAid KGCP462KSS02 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents