Haier HLPW028AXW Installation and User Manual

Top-Load Clothes Washer

Laveuse à chargement par le haut

Lavadora de ropa con carga superior

Installation and User Manual

Instructions d’installation et

Guide de l’utilisateur

Instrucciones de instalación y

Manual del usuario

HLPW028AXW

Designed for

High-Eciency;

use HE detergent.

Conçue pour

haute ecacité;

utiliser un

détergent HE.

Diseñada para un

alta eciencia; use

detergente HE

(Alta eciencia).

Part # 0030811644

1

TABLE OF CONTENTS

WASHER SAFETY ................................................................................................ 2

PARTS AND FEATURES .......................................................................................5

INSTALLATION REQUIREMENTS .........................................................................6

Tools Needed ................................................................................................................. 6

Parts Supplied ................................................................................................................ 6

Location Requirements ................................................................................................. 6

Drain System Requirements .........................................................................................7

Electrical Requirements ................................................................................................8

Grounding instructions ................................................................................................. 9

INSTALLATION INSTRUCTIONS ........................................................................ 10

Step 1 - Unpack the Washer ........................................................................................10

Step 2 - Install Bottom Cover ......................................................................................11

Step 3 - Connect and Secure the Drain Hose ............................................................13

Step 4 - Connect the Water Hoses ............................................................................. 14

Step 5 - Level the Washer ...........................................................................................15

Step 6 - Complete Installation ....................................................................................16

CONTROL PANEL AND FEATURES .................................................................... 17

WASHER USE ....................................................................................................20

Step 1 - Prepare and Sort Laundry ..............................................................................20

Step 2 - Add Fabric Care Products ..............................................................................20

Step 3 - Load the Washer ............................................................................................21

Step 4 - Start the Washer ............................................................................................ 21

WASHER CARE ..................................................................................................22

Cleaning .......................................................................................................................22

Vacationing Precautions .............................................................................................23

Moving or Storage Preparation ...................................................................................23

Reinstalling/Using Washer Again ................................................................................24

TROUBLESHOOTING ........................................................................................25

LIMITED WARRANTY ........................................................................................28

RECORD KEEPING

Thank you for purchasing this Haier

product. This user manual will help you

get the best performance from your

new washer.

For future reference, record the model

and serial number located on back of

the washer, and the date of purchase.

Staple your proof of purchase to this

manual to aid in obtaining warranty

service if needed.

___________________________________

Model number

___________________________________

Serial number

___________________________________

Date of purchase

2

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and

on your appliance. Always read and obey all safety messages.

DANGER

WARNING

CAUTION

This is the safety alert symbol.

This symbol alerts you to potential hazards that can

kill or hurt you and others. All safety messages will

follow the safety alert symbol and either the word

“DANGER,” “WARNING” or “CAUTION.”

These words mean:

An imminently hazardous situation. You

could be killed or seriously injured if you

don’t immediately follow instructions.

A potentially hazardous situation

which, if not avoided, could result in

death or serious bodily injury.

A potentially hazardous situation

which, if not avoided, may result in

moderate or minor injury.

All safety messages will tell you what the potential hazard is, tell you

how to reduce the chance of injury, and tell you what can happen if the

instructions are not followed.

3

IMPORTANT SAFETY

INSTRUCTIONS

WARNING: To reduce the risk of re, electrical shock, injury to persons,

or damage when using the washer, follow basic precautions, including

the following:

•

Keep the area around

your appliance free from

combustible materials such as

lint, paper, rags or chemicals.

•

Close supervision is

necessary if this appliance is

used by or near children. Do

not allow children to play on,

with, or inside this appliance.

•

Do not place articles that

have been previously cleaned

in, washed in, soaked in, or

spotted with gasoline, dry-

cleaning solvents or other

ammable or explosive

substances in the wash water.

These substances give o

vapors that could ignite or

explode.

•

Do not add gasoline, dry-

cleaning solvents, or other

ammable or explosive

substances to the wash

water. These substances give

o vapors that could ignite or

explode.

•

Do not reach into the

appliance if the wash basket,

tub or agitator is moving.

•

Do not tamper with the

controls.

•

To minimize the possibility

of electric shock, unplug this

appliance from the power

supply before attempting any

maintenance or cleaning.

NOTE: Turning power o does

NOT disconnect the appliance

from the power supply.

•

Do not attempt to service,

repair or replace any part

of the appliance unless

specically recommended

in this user manual or in

published repair instructions

that you understand and have

the skills to carry out.

•

Before discarding or removing

from service, remove the

washer door or lid.

•

Read all of the instructions

before using this appliance.

•

Use this appliance only for

its intended purpose as

described in this user manual.

•

Do not use the washer for

commercial clothes washing.

4

IMPORTANT SAFETY

INSTRUCTIONS

•

Under certain conditions,

hydrogen gas may be

produced in a hot-water

system that has not

been used for 2 weeks or

more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water

system has not been used for

such a period, before using

a washing machine, turn on

all hot-water faucets and

let the water ow from each

for several minutes. This will

release any accumulated

hydrogen gas. As the gas is

ammable, do not smoke or

use an open ame during this

time.

•

This appliance must be

properly installed and

located in accordance with

the installation instructions

before it is used.

•

Do not store or install this

appliance where it will be

exposed to temperatures

below freezing or exposed

to weather, which can cause

damage to the appliance.

•

The appliance must be

properly grounded to conform

with all electrical codes and

ordinances. See “Electrical

Requirements” section.

READ AND SAVE THESE

INSTRUCTIONS

WARNING

Suﬀocation Hazard

Before you throw away your old appliance, remove the door or lid so

that children cannot hide or get trapped inside your old appliance.

Failure to follow these instructions can result in death or brain damage.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the

State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the

State of California to cause birth defects or other reproductive harm.

5

PARTS AND FEATURES

A

B

C

D

E

F

G

M

N

O

P

I

J

H

K

L

a Top Lid

b Control Panel

c Cabinet

d Cabinet Handle

e Leveling Feet (2)

f Liquid Bleach Dispenser

g Drain Port

h Power Cord (120 Volt/ 60 Hz)

i Access Panel

j Cold Water Inlet Valve

k Hot Water Inlet Valve

l Wash Basket

m Powdered Detergent Dispenser

n Outer Tub Cover

o Balance Ring

p Lint Filter

6

INSTALLATION REQUIREMENTS

TOOLS NEEDED

•

Pliers

•

Wrench

•

Flat-blade Screwdriver

•

Measuring Tape

•

Carpenter’s Level

•

Phillips Screwdriver

PARTS SUPPLIED

•

Drain Hose Clamp

•

Drain Hose Hook

•

Drain Hose

•

Water Hoses (2)

(at washers pre-installed)

•

User Manual

•

Bottom Cover

(with screw)

LOCATION REQUIREMENTS

•

The washer must be installed on a solid oor to minimize vibration during the

spin cycle. A concrete oor is best.

•

The oor should be level with maximum slope of 1" (25 mm) under entire washer.

•

A suitable location is protected from direct sunlight and heat sources such as

radiators, baseboard heaters, or cooking appliances.

•

Do not install on carpeting.

•

The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of

power cord on the back of the washer.

•

Hot and cold water faucets must be present within 3 ft. (0.9 m) of the hot and

cold connections on the washer.

•

A water heater must supply hot water with a temperature of at least 120°F

(49°C).

•

The water pressure should be between 20 and 100 psi (138 and 690 kPa).

IMPORTANT: Do not install or operate the washer where it will be exposed to

temperatures below 32°F (0°C). Water remaining in the washer will freeze and cause

damage to the washer.

7

WASHER DIMENSIONS

21²⅓₂"

(55.0 cm)

22¹⁄₁₆"

(56.0 cm)

37⅝

"

(95.6 cm)

DRAIN SYSTEM REQUIREMENTS

WALL OR FLOOR STANDPIPE

The height of the standpipe must be between 39" (99 cm) and 60" (153 cm) from the

bottom of the washer. The minimum diameter of the standpipe must be 2" (5 cm).

Wall Floor

39" – 60"

(99 cm – 153cm

)

LAUNDRY TUB

The laundry tub must have a minimum

capacity of 20 gal. (76 L). The height of the

laundry tub must be at least 39" (99 cm)

and no more than 48" (122 cm).

39" – 48"

(99 cm – 122cm)

8

ELECTRICAL REQUIREMENTS

WARNING

Electrical Shock Hazard

The washer must be connected to a properly grounded 120 volt, 60 Hz.,

AC only, 15- or 20-amp, fused electrical supply. A time-delay fuse or

circuit breaker is recommended.

Failure to do so could result in death, ﬁre or electric shock.

•

If you are in doubt the electric supply provided meets the above requirements,

contact a licensed electrician.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove the ground prong from the power cord plug.

Do not use an adapter.

Do not use an extension cord.

Failure to do so can result in death, ﬁre or electrical shock.

•

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required.

A time-delay fuse or circuit breaker is recommended. It is recommended that a

separate circuit breaker serving only this appliance be provided.

•

This washer is equipped with a power supply cord having a 3 prong grounding

plug.

•

To minimize possible shock hazard, the cord must be plugged into a mating,

3prong, grounding-type outlet, grounded in accordance with local codes and

ordinances. If a mating outlet is not available, it is the personal responsibility and

obligation of the customer to have the properly grounded outlet installed by a

qualied electrician.

9

•

If codes permit and a separate ground wire is used, it is recommended that a

qualied electrician determine that the ground path is adequate.

•

Do not ground to a gas pipe.

•

Check with a qualied electrician if you are not sure the washer is properly

grounded.

•

Do not have a fuse in the neutral or ground circuit.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected

washer:

The washer must be grounded.

In the event of a malfunction

or breakdown, grounding will

reduce the risk of electric shock

by providing a path of least

resistance for electric current.

The washer is equipped with

a cord having an equipment-

grounding conductor and a

grounding plug. The plug must

be plugged into an appropriate

outlet that is properly installed

and grounded in accordance with

all local codes and ordinances.

WARNING: Improper connection

of the equipment-grounding

conductor can result in a risk of

electric shock.

Check with a qualied electrician

or serviceman if you are in doubt

whether the washer is properly

grounded.

Do not modify the plug provided

with the washer; if it will not t

the outlet, have a proper outlet

installed by a qualied electrician.

For a permanently connected

washer:

The washer must be connected

to a grounded metal, permanent

wiring system, or an equipment-

grounding conductor must be run

with the circuit conductors and

connected to the equipment-

grounding terminal or lead on the

washer.

10

INSTALLATION INSTRUCTIONS

We recommend that your new washer be installed by a qualied appliance

technician. If you feel that you have the skills to install the washer, please read the

installation instructions carefully before installing.

IMPORTANT:

•

If, after completing these steps, you are unsure that the washer is properly

installed, contact a qualied appliance technician.

•

If your washer was just delivered and the outside temperature was below

freezing, do not operate until the washer warms up to room temperature.

STEP 1 - UNPACK THE WASHER

WARNING

Suﬀocation Hazard

To avoid danger of suﬀocation, keep plastic bag and other packing

material away from babies and children. Do not use this bag in cribs,

carriages and playpens. The plastic bag could block nose and mouth

and prevent breathing. This bag is not a toy.

Failure to follow these instructions can result in death or brain damage.

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

1. Remove all packing materials. This includes the foam base, molded plastic

support and all adhesive tape holding the washer accessories inside and outside.

IMPORTANT: Failure to remove the packing base will cause the washer to not

operate properly and will void your warranty.

•

Open the lid to access the wash basket brace. Pull up on the basket brace to

remove.

NOTE: Save the wash basket brace to use when moving the washer in the

future.

11

a

a Wash Basket Brace

•

Using two or more people, lift the washer o of the packing base and the

molded plastic support.

NOTE: It is possible for the plastic support, under the U bracket, to remain

attached to the bottom of the washer. Make sure it is removed with the foam

base.

b

a

a Plastic

Support

b Foam

Base

2. Inspect the washer, and remove any remnants of packaging, tape or printed

materials before using the washer.

3. Properly dispose of /recycle all packing material.

STEP 2 - INSTALL BOTTOM COVER

WARNING

Electrical Shock Hazard

Install bottom cover.

Lock all four casters prior to operating washer.

Failure to do so can result in death, electric shock or personal injury.

12

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1. Lay folded blankets or towels on the oor to create an incline.

2. Using two or more people, lay the washer onto its side so that the top of the

washer is higher than the base, and the drain outlet is facing upward.

a

b

a Drain Outlet

b Top of Washer

3. With the side of the bottom cover that is marked FRONT/UP toward the interior

and front of the washer, align the edges of the cover with the track in the bottom

of the washer.

4. From the front of the washer, slide the bottom cover fully into the track making

sure the edges of the cover are behind the tabs.

NOTE: When the cover is completely inserted into the track behind the tabs, the

hole for the screw will be ush and aligned with the hole in the cabinet bottom.

13

a

c

b

c

a Bottom Cover

b Screw Hole

c Tabs

5. Using the screw (provided), fasten the bottom cover to the cabinet base.

6. Using two or more people, stand the washer upright.

STEP 3 - CONNECT AND SECURE THE DRAIN HOSE

1. Enlarge the opening by squeezing the

ends of the drain hose clamp together.

Slide the clamp over the end of the drain

hose, and onto the exible section of the

hose.

2. Fit the end of the drain hose over the

plastic drain port extending from the

washer.

3. Squeeze the ends of the clamp to enlarge

the opening and slide the clamp over the

connection of the drain hose and drain

port. Release the clamp to tighten.

4. Put the drain hose hook end in a drain pipe or laundry tub.

5. Secure the drain hose in place by fastening it to a water hose, the standpipe, or a

leg on the laundry tub. See “Drain System Requirements” for illustrations.

14

STEP 4 - CONNECT THE WATER HOSES

Depending on your model, the water hoses provided will be either Style 1 or Style 2.

Follow the instructions specic to the style of water hoses provided.

IMPORTANT: Only use new hoses when installing the washer. The water hoses must

have a coarse thread connectors on one end (to connect to the household water

supply), and ne thread connectors on the other end (to connect to the washing

machine).

NOTE: Periodically inspect hoses for cracks, cuts, leaks or wear. Replace with new

hoses every 5 years.

1. Check that a at washer is present and rmly in place in each end of the water

inlet hoses. Flat washers are pre-installed at the factory.

Style 1 Style 2

A

a

a Washer

2. Thread the inlet hoses onto the water faucets by hand until rmly hand

tightened.

IMPORTANT: To avoid damage to the hose couplings, do not overtighten.

NOTE: To avoid damage to the faucets do not use plumber’s tape or sealants on

the valve threads.

a

a Gray End Only

3. Thread the white end of the inlet hoses by hand onto the inlet valves marked “H”

(hot) and “C” (cold) on the back of the washer until snug.

IMPORTANT:

•

Do not connect the gray end of the inlet hose to the washer. You will damage

the threads and it will leak.

•

To avoid damage to the hose couplings, do not over tighten.

15

Style 1 - Using pliers, tighten the connection an additional two-thirds turn.

Style 2 - Do not use pliers to tighten the connection.

NOTE: To avoid damage to the washer inlet valves, do not use plumber’s tape or

sealants on the valve threads.

Style 1 Style 2

a a

a White End Only

4. Turn on the hot and cold water faucets and check for leaks. If there is any leaking,

check steps 1 through 3 again.

STEP 5 - LEVEL THE WASHER

IMPORTANT: Proper leveling of the washer will help reduce noise and vibration.

1. Place washer in its nal location. Check that the water and drain lines are not

strained or pinched. Make sure that all four feet are rmly in contact with the

oor and that the washer rests solidly in position.

2. Using a carpenter’s level, check to make sure the washer is level from side to

side and from front to back.

3. If the washer is not level, adjust the leveling feet. Turn clockwise to extend (raise

the washer) or counterclockwise to retract (lower the washer).

Raise Lower

16

STEP 6 - COMPLETE INSTALLATION

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove the ground prong from the power cord plug.

Do not use an adapter.

Do not use an extension cord.

Failure to do so can result in death, ﬁre or electrical shock.

1. Plug the washer into a grounded 3 prong outlet.

2. Check that water faucets are turned on.

3. Dispose of/recycle all packaging materials.

4. Run a normal wash cycle using detergent to test and

clean the washer. See the ”Operating Instructions”

section.

17

CONTROL PANEL AND FEATURES

CONTROL PANEL

A B C D G H

E F

WASH CYCLE BUTTON

•

Use this button to select the desired cycle for your wash load.

•

The standard default settings of each cycle will be displayed; the default

settings can be changed by using the Setting buttons - Wash Temp, Soil

Level, and Water Level.

•

There are 8 cycles to choose from:

Heavy Duty - Use this cycle for heavily soiled durable garments. This cycle

can also be used for towels, sports gear, children’s clothes, etc.

Whites - Use this hot water cycle for white and light colored clothing that is

susceptible to transfer of dye.

Perm Press - Use this cycle for light to normally soiled garments.

Normal - Use this cycle for normally soiled cottons and mixed fabric loads.

Delicate - Use this cycle to wash lightly soiled garments and delicate clothes

that need gentle washing.

Quick - Use this cycle to wash small, lightly soiled loads that are needed in a

hurry.

Rinse & Spin - Use this cycle for removing excess detergent and refreshing

clean garments.

Spin Only - Use this cycle to extract water from sink washed or clean wet

garments.

SETTING BUTTONS

Wash Temp Button

•

Use this button to select a wash temperature; all rinses use cold water. For

best results follow your garment label instructions and use the warmest

water temperature that is safe for your fabric.

•

Not all selections are available for all cycles.

18

Soil Level Button

•

Use this button to select the soil level that is most appropriate for your load.

Based on the soil level, the wash time will increase or decrease by 4-8 minute

increments in the Estimated Time Remaining Display.

•

There are 3 soil levels to choose from - Heavy, Normal, Light

Water Level Button

•

Use this button to select an appropriate water level for your load. Small is the

lowest water level and Super is the highest.

DELAY START BUTTON

•

Press this button to delay the start of your wash cycle between 1 - 24 hours

in one hour increments.

•

Use this button to select a delayed start of the washer. The number of hours

will be shown in the Estimated Time Remaining Display. Each press of the

Delay Start Button will increase the time by 1 hour.

•

One button press after 24 will cancel the Delay Start feature. You can also

cancel the Delay Start feature by turning o power to the washer with the

Power Button.

•

The Start/Pause Button must be selected to begin the countdown.

EXTRA RINSE BUTTON

•

Press to add an extra rinse to your wash cycle.

NOTE: Some cycles have this option as a default. See the Cycle Guide for

details.

ESTIMATED TIME REMAINING DISPLAY

•

The Estimated Time Remaining Display shows the estimated cycle time in

minutes.

•

When the Delay Start option is being used, the Estimated Time Remaining

Display will show the delay time in hours.

CYCLE STATUS INDICATORS

•

The Cycle Status lights indicate the stages of the selected cycle.

START/PAUSE BUTTON

•

Press this button to start a selected cycle or to pause an operating cycle.

NOTE: After starting the wash cycle, you must pause the operating cycle to

change the Wash Temp, Soil Level and Water Level settings.

POWER BUTTON

IMPORTANT: Switching o power with the power button does not disconnect

the appliance from the electrical supply.

•

Press the power button to turn on the washer.

NOTE: If the washer is turned on, but START is not pressed, the power will

automatically turn o after 5 minutes.

La page charge ...

Haier HLPW028AXW Installation and User Manual

Haier HLPW028AXW Installation and User Manual

dans d''autres langues

Documents connexes

Autres documents