Ace Bayou X Rocker Manuel utilisateur

X Rocker
Marque
Ace Bayou
Modèle
X Rocker
Taper
Manuel utilisateur

Ce manuel convient également à

1
0287401
2
FEATURES
A-Control Panel
A1
A2
-Audio Input Jack
A3
-Power On/Off button Switch and Volume Adjustment
A4
-Power Indicator Light
A5
-Bluetooth indicator light
-5V DC Power input lack
A5
A3
A4
A
A
1 A2
3062.969.668:enohP:beWmoc.uoyabeca@ecivres:liamE?pleHdee moc.rekcorxeht.wwwN
3.2
8
ft/1m
B2
B1
B-Accessories Supplied
B1-1m3.5mm stereo male to 3.5mm stereo male cable(1pc)
B2-INPUT:100-240V AC 50/60Hz
C-Audio Specification
Signal-to-Noise Ratio(Amplifier):Satellite : 60dB
Frequency Response: 60Hz~20kHz
Distortion: Satellite. : 1% z)(F=1kH
Input: DC 5 /1A
OFF
INPUT
ON
DC 5V/1A
OUTPUT:5V DC 1000mA 5 W Main POWER Adapter.
Play your iPhone, iPod touch, iPad or other device enabled with Bluetooth technology wirelessly through your chair.
Control your music directly from your
Connect device without ever going near
chair.
ATTENTIONS:
Bluetooth connection has a 30ft. range of virtually unlimited wireless listening in your home.
The bluetooth indicator light(A4) will be actumatically slow flashing when connect the pawer adapter.
(A3) and bluetooth indicator light(A4) are on.
5
chair
Switch Power On/Off Button Switch and Volume Adjustment(A2)
More information please see additional assembly instruction!
lift all the spareparts out of box.
Please complete steps 1-7 to assemble the chair.
Adjust the bass and volume levels to your preference preference---start useing.
7.
MP3/CD/DVD/GAMES/PSP
green
Bluetooth Device
Only 1 device can be paired to X Rocker at a time, to pair X Rocker with a mobile device, refer to the Bluetooth paring pr ocedures
in corresponding mobile phone or music player user manual and follow the steps below:
Make sure that the power adapter is well connected while you use bluetooth funcation since the bluetooth indicator light(A4)
will be actumatically slow flashing and the audio also will be actumatically under the bluetooth Status when connect the power adapter.
Select the device name “X Rocker” on the screen of your device, add the unit to the your device’s paired device list.
When pairing is successful, the blue LED indicator(A4) will stay on.
Confirm the connection on your device.
Your X ROCKER is now connected and ready to play music! Just play music on your device as you normally would and the sound will
come out of your X Rocker!
Keep in mind that X Rocker has a 30-feet / 10 meters range.
Make sure that there is no wired line that insert in your device before using bluetooth.
If you move out of range, or turn off the Bluetooth feature on your mobile device, X Rocker will disconnect from your device.
To reconnect, simply access the Bluetooth Manager on your device and select “X Rocker” device listed.
If you want to switch from one device to another, follow the steps below:
End the existing Bluetooth connection with the connected device, access the Bluetooth Manager and disable the Bluetooth
function of the device.
The X Rocker can now be connected to a different device.
Follow the directions in “PAIRING YOUR X ROCKER” to connect a different device.
If the music device is out of range(beyond 30-feet / 10 meters) of the X Rocker, or there is somthing blocking the Bluetooth
signal, the LED light will turn off to indicate that the Bluetooth connection with the music device has been lost.
To avoid a lost connection:
Move the music device back into the range(within 30-feet / 10 meters), and/or make sure there is a clear line of sight and that
there are no obstructions between the X Rocker and the music device.
Within 30 seconds , the connection will automatically be re-established and the blue LED light will turn on.
For your own device ,you need to re-start your music player .
If the connection is lost for more than 30 seconds , the connection will need to be re-established, follow the directions in
“Reconnecting Your Device”.
6
just insert the wired lind on control pannel (A1) and your device.
When you use Bluetooth mode:
Make sure that the power adapter is well connected while you use bluetooth funcation since the bluetooth
indicator light(A4) will be actumatically slow flashing and the audio also will be actumatically under the bluetooth
Status when connect the pawer adapter.
Make sure the volume of X Rocker and the volume of mobile music device is set to a comfortable listening level.
Make sure you are within range of the X Rocker and your mobile music device is connected via Bluetooth technology
with the X Rocker.
Make sure that there is no wired line that insert in your device before using bluetooth.
5
5
If the indicator light(A3)dose not light up, try to use another power3
5
outlet in your home.
switch
7
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (
2) this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre
le fonctionnement.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC and IC Radiation Exposure Statement:
This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Déclaration d’IC sur l’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés.
Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.
8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ace Bayou X Rocker Manuel utilisateur

X Rocker
Marque
Ace Bayou
Modèle
X Rocker
Taper
Manuel utilisateur
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Autres documents