Inter-Tel Encore CX Getting Started Manual
- Catégorie
- Téléphones IP
- Taper
- Getting Started Manual
EncoreCX
Getting Started Guide
1
Table of Contents
GUIDE TO SYSTEM DOCUMENTATION ............................................................................................. 3
Getting Started Guide ............................................................................................................................. 3
Phone Quick Reference Guide................................................................................................................ 3
Administrator's Manual .......................................................................................................................... 3
Internet Module Manual ......................................................................................................................... 3
Documentation CD ................................................................................................................................. 3
SYSTEM DESCRIPTION ........................................................................................................................... 4
System Options....................................................................................................................................... 4
Technical Support................................................................................................................................... 4
Emergency Assistance............................................................................................................................ 4
System Programming Notes ................................................................................................................... 4
ECX 1000 digital telephone set layout ................................................................................................... 5
ECX 2000 digital telephone set (with 32 key Console).......................................................................... 5
Explanation of Symbols in this Guide .................................................................................................... 6
SYSTEM PROGRAMMING ...................................................................................................................... 6
Accessing the System Programming ...................................................................................................... 7
PROGRAMMING SYSTEM TIME & DATE .......................................................................................... 8
CONFIGURING A GROUP (RING/HUNT GROUP).............................................................................. 9
Configuring a Group & Assigning extensions........................................................................................ 9
Configuring a Group & Assigning extensions [continued] .................................................................. 10
Note on groups & group types.............................................................................................................. 11
Group programming ............................................................................................................................. 11
Ring Group:.......................................................................................................................................... 11
Hunt Group:.......................................................................................................................................... 11
Group names......................................................................................................................................... 11
Mapping Incoming Calls to a Group [From a CO line]........................................................................ 12
Note on incoming call mapping............................................................................................................ 12
CONFIGURING CALL RESTRICTION RULES.................................................................................. 13
Call Restriction and Tables................................................................................................................... 13
Setting up Call Restriction Tables ........................................................................................................ 14
Assigning Rules to Extensions ............................................................................................................. 15
CONFIGURING NIGHT & WEEKEND SERVICE.............................................................................. 16
SYSTEM PASSWORD .............................................................................................................................. 17
Changing the System Password............................................................................................................ 17
Viewing Extension Passwords.............................................................................................................. 17
VOICE MAIL ............................................................................................................................................. 18
Configuring the System Voice Mail box .............................................................................................. 18
Enabling the System Voice Mail box ................................................................................................... 18
Assigning Voice Mail extensions ......................................................................................................... 19
Assigning Voice Mail capacities .......................................................................................................... 19
AUTO ATTENDANT ................................................................................................................................ 20
Assigning lines to be answered by the Auto Attendant ........................................................................ 20
Changing the Auto Attendant Greetings............................................................................................... 21
Entering a Directory Message .............................................................................................................. 21
SPEED-DIAL NUMBERS......................................................................................................................... 22
Programming Personal Speed-Dial numbers........................................................................................ 22
Programming System Speed-Dial numbers.......................................................................................... 23
EncoreCX
Getting Started Guide
2
POWER FAILURE OPERATION ........................................................................................................... 24
Battery Backup Unit (BBU) ................................................................................................................. 24
EXTENSION SETTINGS.......................................................................................................................... 25
Extension Name & Settings.................................................................................................................. 25
Additional Extension Settings .............................................................................................................. 26
NUMBERING PLAN................................................................................................................................. 28
CONFIGURING THE INTERNET MODULE....................................................................................... 30
ADSL or Broadband Service................................................................................................................ 31
PC PROGRAMMING AND MAINTENANCE TOOL (LOCAL VERSION) ..................................... 32
EncoreCX
Getting Started Guide
3
Guide to System Documentation
The EncoreCX is provided with the following range of documentation:
Getting Started Guide
Provides overview of System Programming and Key Features
The Getting Started Guide takes the user through key system programming and enables the user to
modify basic system configurations to suit their customer's business requirements. In addition, it allows a
designated Administrator to configure the system, through key settings and programming elements,
enabling a tailored business solution.
Phone Quick Reference Guide
Provides Quick Reference to Key System Features
The Quick Reference Guide is supplied to each telephone each user. It gives basic instructions on how to
operate features on digital telephone sets and standard telephones.
Administrator's Manual
Provides complete detail on System Programming and Features
The Administrator's Manual is provided on a CD that is supplied with every EncoreCX System. This
manual provides detailed information on System Programming, Administration and Usage, and provides
the system Installer or Administrator with information on configuration of advanced system features.
Internet Module Manual
Provides complete detail on Internet module Programming and Usage
The Internet module Manual is provided with each EncoreCX Internet module, covering Programming,
Administration and Usage of the module. It provides the designated Installer or Administrator with
information on configuration of advanced system features.
Documentation CD
The Documentation CD contains PDF files of the Getting Started Guide, Administrator's Manual, Phone
Quick Reference Guide, Internet Module Manual and personal system phone label templates.
EncoreCX
Getting Started Guide
4
System description
· The EncoreCX is an integrated communications system. It supports all your voice call needs as well
as an optional integrated data solution that allows multiple simultaneous Internet sessions.
· The EncoreCX can accommodate up to 20 Central Office (CO) lines with up to 40 extensions.
System Options
The following options are available for the EncoreCX:
· Additional extension modules each containing eight extension ports.
· Additional CO line modules, each with two CO Lines, to a maximum of 20 CO lines.
· Optional Internet module for shared high-speed Internet connections.
· Optional Voice Mail module for professional voice services.
· Optional Battery Back-Up module for full system operation in power failure.
· ECX 1000 digital telephone set with full menu display, speaker phone operation and eight
programmable keys. It is available in gray (ECX 1000) or off-white (ECX 100W).
· ECX 2000 digital telephone set with full backlit menu display, speaker phone operation and 16
programmable keys. A Direct Station Selection (DSS) unit with an additional 32 programmable keys
can be used on up to eight ECX 2000 sets.
· ECX 100 standard analog set with Caller ID.
· Door Phone to facilitate visitor introduction.
Technical Support
If problems persist when installing or servicing Inter-Tel equipment, certified technicians may, while on
site and with the proper troubleshooting tools available, contact Inter-Tel’s Technical Support Department
at 1-888-777-EASY (3279).
Emergency Assistance
After office hours and on weekends, call 1-888-777-EASY (3279) and leave your message with the
voice mail service. A Technical Support Product Specialist will return your call as soon as possible,
usually within an hour. As a backup (e.g., the main number does not answer or you do not receive a call
back within an hour), you can call 480-961-0277. Please remember that this is an emergency number for
critical system problems only. Sales questions, equipment orders, etc., can only be handled during
normal business hours.
System Programming Notes
The EncoreCX may be programmed from either a digital telephone set or from a PC running the
Maintenance and Programming Software application included on the CD supplied with your system.
This guide outlines the key elements of System Programming from the digital telephone sets only.
EncoreCX
Getting Started Guide
5
ECX 1000 digital telephone set layout
ECX 2000 digital telephone set (with 32 key Console)
Message
Waiting/Ringing
Indicator
Scroll/Edit keys
Display keys
Volume keys
4 Function keys:
Hold
Program
Message
Directory
Numeric keypad
Data socket and
Headset socket
(underneath)
Handset
Mute key
Speaker key/light
Clear key
Programmable Keys
EncoreCX
Getting Started Guide
6
Explanation of Symbols in this Guide
Specific symbols are used to define particular operations or to highlight important areas as follows:
Caution
Programming key
Select function
Scroll through menus
System Programming
The system may only be programmed from one specific extension, by default this is configured as
extension 20, but the programming position can be moved to any extension.
The System Programming is separated into three main blocks:
System covers aspects that affect operations across the complete system.
Extension covers aspects that may be programmed per extension.
Lines covers aspects which affect the Network connections, Incoming and Outgoing Calls,
and Least-Cost Routing configuration.
Scroll
EncoreCX
Getting Started Guide
7
Accessing the System Programming
Instruction Action Menu Display
From the Programming phone (ext. 20
by default) select the Programming key
---PHONE SETUP---
- Language
- Auto Answer
- Key Programming
Scroll through the menus to find
[System Programming] and select the
option
---PHONE SETUP---
- System Programming
- Background Music
- Exit
Enter Password
1111 (default)
-Enter System Password
-Exit
You are now in the Main Menu for
System Programming and are presented
with the following Sub Menus for
Programming Options
Select Option
-System
-Extensions
-Lines
The remainder of this document assumes that you have successfully navigated
to the System Programming sub menu above.
Press the key
for two seconds or hang up to exit the programming mode.
Modified settings are saved automatically.
For more complex settings, please refer to the Administrator's Manual
provided on the CD-ROM packaged with your system.
EncoreCX
Getting Started Guide
8
Programming System Time & Date
Instruction Action Menu Display
From the system programming
sub menu select [System]
Select Option
-System
-Extensions
-Lines
Select [Time & Date]
Select Option
- Language
-Time And Date
-Change Password
Enter Time [HHMM]
Set Time HHMM
-Confirm
-Exit
Enter Date [MMDDYY]
Set Date MMDDYY
-Confirm
-Exit
Note: The time and date settings are saved automatically, you are then returned to the main
programming menu.
EncoreCX
Getting Started Guide
9
Configuring a Group (Ring/Hunt Group)
Configuring a Group & Assigning extensions
Instruction Action
Menu Display
From the system programming
sub menu select [Lines]
Select Option
-System
-Extensions
-Lines
Select
[Group Programming]
Select Option
-Equipped Lines
-Group Programming
-Incoming Ringing
Select the group to be programmed
[Scroll if necessary]
Select Group
à Group 1 Group 4 à
à Group 2 Group 5 à
à Group 3 Group 6 à
[To select a group(s), select the
diamond next to it ]
Select the group type to be programmed
Select Group Type
-Ring Group
-Hunt Group
-Exit
Scroll
EncoreCX
Getting Started Guide
10
Configuring a Group & Assigning extensions [continued]
Instruction Action Menu Display
If RING GROUP is selected
Select the extensions to be included in
the RING GROUP
Select Extensions
à Ext. 20 Ext. 23 à
à Ext. 21 Ext. 24 à
à
Ext. 22 Ext. 25 à
[To select an extension(s), select the
diamond next to it ]
If HUNT GROUP is selected
Select the HUNT GROUP type required
(See next page for Notes on Group
Types)
Select Hunt Group Type
à Linear
à Circular
à Longest Idle
Select the extensions to be included in
the HUNT GROUP
Select Extensions
à
Ext. 20 Ext. 23 à
à
Ext. 21 Ext. 24 à
à Ext. 22 Ext. 25 à
[To select an extension(s), select the
diamond next to it ]
Scroll
EncoreCX
Getting Started Guide
11
Note on groups & group types
Group programming
· When assigning extensions within a ring or hunt group, the first eight extensions are included
by default in Group 1. The remaining 19 groups contain extension 20 only. The Administrator
may select or deselect extensions within a group at any time.
· Up to 20 groups can be programmed.
· Up to 16 extensions can be assigned to each group.
· Extensions can be in multiple groups.
· Groups of different types may be configured in your EncoreCX system. When programming a
group you will be offered the following options:
Ring Group:
When selected, all phones in the group ring simultaneously for an incoming call.
Hunt Group:
When selected, incoming calls are presented to one phone only within the group and the calls are
filtered through the various extensions as follows:
· Linear
Calls are presented to the lowest numbered extension first. If an extension is busy, the
call is presented to the next free extension.
· Circular
Calls are presented in strict rotation starting with the lowest numbered extension in the
group (i.e., Call 1 is presented to extension 20, call 2 to extension 21 etc.).
· Longest Idle
Incoming calls are presented to the extension that has been idle for the longest period of
time.
Group names
All groups can be assigned specific names to facilitate ease of programming and system usage.
EncoreCX
Getting Started Guide
12
Mapping Incoming Calls to a Group [From a CO line]
Instruction Action Menu Display
From the System Programming
sub menu select [Lines]
Select Option
-System
-Extensions
-Lines
Select
[Incoming Ringing]
Select Option
-Equipped Lines
-Group Programming
-Incoming Ringing
Select the line for which this rule
applies
Select Line
-Line 1
-Line 2
-Door Phone
Select the time when this rule should
apply
Select Option
-Day Mode
-Night Mode
-Day And Night Mode
Select the destination for incoming calls
on this line [ Group in this example]
Select Destination
-Extension
-Group
à
Auto Attendant
Select the group which is to receive
incoming calls on this line during the
relevant time period
Select Group
à
Group 1 Group 4 à
à
Group 2 Group 5 à
à
Group 3 Group 6 à
[To select a group(s), select the
diamond next to it ]
Note on incoming call mapping
You may map incoming calls on specific lines to be presented to different destinations (Groups,
Extensions, Auto Attendant or Courtesy Service) in day and night modes.
Scroll
Scroll
EncoreCX
Getting Started Guide
13
Configuring Call Restriction Rules
Call Restriction and Tables
Call Restriction allows you to prevent specific extensions from making specific types of calls in Day or
Night Mode. To configure Call Restriction rules, you first set up the rules [CLASS CODES] as
described below and then assign the relevant rules to individual extensions.
There are four tables, that can be programed, and six [CLASS CODES], that can be assigned to an
extension as listed below.
Type of Restriction Table CLAS
S
Typical
Use
No restriction None 1 All calls allowed
Restricted from calls to codes in Table 2 2 2 Restrict
International
calls
Restricted from calls to codes in Tables 2 & 3 3 3 Restrict National
calls
Allowed internal and emergency calls only None 4 Restrict all calls
Allowed numbers that can be added to Tables 2 & 3 5 5 Allow these
exceptions
Restricted Numbers that can be added to Tables 1, 2 &3 6 6 Restrict these
numbers also
EncoreCX
Getting Started Guide
14
Setting up Call Restriction Tables
Instruction Action Menu Display
From the System Programming
sub menu select [System]
Select Option
-System
-Extensions
-Lines
Scroll down and select
[Class Codes]
Select Option
-Caller ID List
-Class Codes
-Local Codes
Select the table which is to be
programmed
Select Table
-Table 2
-Table 3
-Allowed Table
Enter Index 01 – 50
May be an existing or new index XX
Enter Index 01 - 50
-Exit
Enter the code and press Confirm
[See Note below for "Any" option]
xxxxxxxxxx
-Any
-Confirm
-Change
Note: The "Any" option is a wildcard entry, which is used to enter the range 1-0, (e.g., entering 403 and
then "Any" restricts the range 403-1 to 403-0).
Scroll
Scroll
EncoreCX
Getting Started Guide
15
Assigning Rules to Extensions
Instruction Action Menu Display
From the System Programming
sub menu select [Extension]
Select Option
-System
-Extensions
-Lines
Select
[Restriction Classes]
Select Option
-Name Programming
-Restriction Classes
-Tone Protect
Select the time when this rule should
apply
Select Option
- Day Class Of Service
- Night Class Of Service
- Exit
Select the class rule to be applied
Class 1 to 6
Select Option
-Class 1 Class 4-
-Class 2 Class 5-
-Class 3 Class 6-
Select the extensions to which this rule
applies
Class X day/night
¨
Ext. 20 Ext. 23 à
à
Ext. 21 Ext. 24 à
à
Ext. 22 Ext. 25 ¨
[The selected extension is indicated by
¨ ]
Note: You can apply the same rule to multiple extensions.
You can apply multiple rules to the same extension.
You can exit the menu at any time and the settings will be saved
EncoreCX
Getting Started Guide
16
Configuring Night & Weekend Service
Instruction Action
Menu Display
From the System Programming
sub menu select [System]
Select Option
-System
-Extensions
-Lines
Scroll down and select
[Night Service]
Select Option
-Programming Position
-Night Service
-Music On Hold
Program night service Automatic On &
Off times
[Apply Weekend (if required)]
Select Option
-Automatic On Times
-Automatic Off Times
-Weekend Service
Select the required On Times
Select Option
-On Time 1
-On Time 2
-Exit
Enter the time to be set and then select
Confirm
Set Time [HHMM]
-Confirm
-Change
-Delete
Select the required Off Times
Select Option
-Off Time 1
-Off Time 2
-Exit
Enter the time to be set and then select
Confirm
Set Time [HHMM]
-Confirm
-Change
-Delete
Note: You can apply two sets of times for the Night Service rules to be applied, typically they are used
for lunchtime and out-of-office hours.
Night Service allows you to configure different call routing plans for these time periods.
You may exit the menu at any time and the settings will be saved.
Scroll
EncoreCX
Getting Started Guide
17
System Password
Changing the System Password
Instruction Action Menu Display
From the System Programming
sub menu select [System]
Select Option
-System
-Extensions
-Lines
Select
[Change Password]
Select Option
-Language
-Time And Date
-Change Password
Select
[System Password]
Select Option
-System Password
-Speed Dial Password
-Exit
Enter New Password [xxxx]
4 digit numeric and confirm
1111
-Confirm
-Change
-Exit
Viewing Extension Passwords
Instruction Action Menu Display
From the System Programming
sub menu select [Extensions]
Select Option
-System
-Extensions
-Lines
Scroll down and select
[Examine Passwords]
Select Option
-Examine Passwords
-Restrict Use Of PA
-Port Swapping
Select the password you want to view
Select Option
-Ext. Lock Password
-Voice Mail Password
-System Voice Mail Box
The system mail box password is
displayed immediately. For other
passwords you are prompted to select
the extension.
Note: The "¨"
next to an extension
indicates a voice box is enabled for that
extension.
Select Extension
¨
Ext. 20 Ext. 23 à
¨
Ext. 21 Ext. 24 à
à
Ext. 22 Ext. 25 à
[To select an extension(s), select the
diamond next to it ]
Scroll
EncoreCX
Getting Started Guide
18
Voice Mail
Configuring the System Voice Mail box
Note: To utilize the Voice Mail features on the EncoreCX, you must purchase and install the optional
Voice Mail module.
Instruction Action Menu Display
From the System Programming
sub menu select [Lines]
Select Option
-System
-Extensions
-Lines
Scroll down and select
[System Voice Mail Box]
Select Option
-System Voice Mail Box
-Exit
Select the line(s) which are to be
answered by the System Voice Mail
box when it is enabled
System Voice Mail Box
à
Line 1
à
Line 2
à
Line 3
[The selected lines are indicated by a
¨]
Enabling the System Voice Mail box
Instruction Action Menu Display
From extension 20 in idle menu Scroll
down and select
[System Voice Mail Box]
Select Option
-Night Service
-System Voice Mail Box
-Forward
Scroll
Scroll
EncoreCX
Getting Started Guide
19
Assigning Voice Mail extensions
Note: To utilize the Voice Mail features on the EncoreCX, you must purchase and install the optional
Voice Mail module.
Instruction Action Menu Display
From the System Programming
sub menu select [Extensions]
Select Option
-System
-Extensions
-Lines
Scroll down and select
[Voice Mail Boxes]
Select Option
-System Speed No Override
-Voice Mail Boxes
- Extension Disconnect
Select the extensions which are to be
assigned individual Voice Mail boxes
Select Extension
¨
Ext. 20 Ext. 23à
à
Ext. 21 Ext. 24à
¨
Ext. 22 Ext. 25à
[To select an extension(s), select the
diamond next to it ]
Assigning Voice Mail capacities
Note: The system assigns a limit of 20 messages per mail box, this can be modified.
Instruction Action Menu Display
From the System Programming
sub menu select
[System]
Select Option
-System
-Extensions
-Lines
Scroll down and select
[Voice Mail Capacity]
Select Option
-Voice Mail Capacity
-VM Capacity % used
-Account Codes
Enter the required number of messages
allowed per extension
Enter VM Cap. 010-100
-Exit
Scroll
Scroll
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
Inter-Tel Encore CX Getting Started Manual
- Catégorie
- Téléphones IP
- Taper
- Getting Started Manual
dans d''autres langues
- English: Inter-Tel Encore CX
Autres documents
-
VTech CM18445 Manuel utilisateur
-
-
-
Vodavi Starplus 1224EX General Description, Installation And Maintenance
-
Aastra Dialog 4420 IP Basic Manuel utilisateur
-
-
Harris XG-75 SERIES Manuel utilisateur
-
-
AT&T SynJ SB67138 Manuel utilisateur
-