Skil BY8708-00 Le manuel du propriétaire

1-877-SKIL-999

OR

www.skil.com

For Customer Service

Pour le service à la clientèle

Servicio al cliente

WARNING: To reduce the risk of injury, the user must read and understand the

Owner’s Manual before using this product. Save these instructions for future reference.

AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et

comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide

afin de pouvoir le consulter ultérieurement.

ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender

el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para

consultarlas en caso sea necesario.

Owner’s Manual

Guide d’utilisation

Manual del propietario

40V Lithium Battery

Batterie au lithium 40V

Batería de litio de 40 V

Model/ Modelo/ Modèle: BY8705-00/BY8708-00

2

TABLE OF CONTENTS

Battery Pack Safety Warnings ......................2-5

Symbols .......................................6-10

Get to Know Your Battery ...........................11

Specications ....................................11

Operating Instructions ..........................12-15

Maintenance ...................................16-17

Battery Care ......................................17

Battery Disposal ..................................18

Troubleshooting ..................................18

Limited Warranty Of SKIL Consumer Tools .........20-21

3

READ ALL INSTRUCTIONS THOROUGHLY

BATTERY PACK SAFETY WARNINGS

WARNING

Before using battery pack, read all

instructions and cautionary markings on

battery pack, battery charger, and tools using battery.

Failure to

follow the warnings and instructions may result in electric shock, re

and/or serious injury.

Recharge only with the charger specied by the manufacturer.

A charger that is suitable for one type of battery pack may create a

risk of re when used with another battery pack.

Use power tools only with specically designated battery

packs.

Use of any other battery packs may create a risk of injury

and re.

Know your power tool. Read the operator’s manual carefully.

Learn the tool’s applications and limitations, as well as the

specic potential hazards related to this tool

. Following this rule

will reduce the risk of electric shock, re, or serious injury.

Battery tools do not have to be plugged into an electrical

outlet; they are always in operating condition. Be aware of

possible hazards when not using your battery tool or when

changing accessories.

Following this rule will reduce the risk of

electric shock, re or serious personal injury.

Keep battery out of reach of children and in original package

until ready to use.

When battery pack is not in use, keep it away from other metal

objects like paperclips, coins, keys, nails, screws or other

small metal objects that can make a connection from one

terminal to another.

Shorting the battery terminals together may

cause burns or a re.

Do not place battery tools or their batteries near re or heat.

This will reduce the risk of explosion and possible injury.

Do not store outside or in vehicles.

4

Do not store battery pack in charger.

Battery pack stored in char-

ger over a long period of time could lead to battery pack damage

and re.

Do not open the battery.

There is risk of a short circuit.

Do not crush, drop or damage the battery pack. Do not use a

battery pack or charger that has been dropped or received a

sharp blow.

A damaged battery is subject to explosion. Properly

dispose of a dropped or damaged battery immediately.

Do not use a battery pack or tool that is damaged or modied.

Damaged or modied batteries may exhibit unpredictable behavior

resulting in re, explosion or risk of injury.

Do not insert battery pack in charger if battery pack case is

cracked.

Using damaged battery pack may result in electric shock

or re.

Do not touch the uninsulated portion of output connector or

uninsulated battery terminal.

There is a risk of electric shock.

Batteries vent hydrogen gas and can explode in the presence

of a source of ignition, such as a pilot light. To reduce the risk

of serious personal injury, never use any cordless product

in the presence of open ame.

An exploded battery can propel

debris and chemicals. If exposed, ush with water immediately.

Do not charge the battery in a damp or wet location

. Following

this rule will reduce the risk of electric shock.

Follow all charging instructions and do not charge the battery

pack or tool outside the temperature range specied in the

instructions.

Charging improperly or at temperatures outside the

specied range may damage the battery and increase the risk of

re.

For best results, your battery should be charged in a location

where the temperature is greater than 41°F (5°C) and less than

104°F (40°C).

5

Do not expose a battery pack or appliance to re or excessive

temperature. Exposure to re or temperature above 265℉ may

cause explosion.

Under extreme usage or temperature conditions, battery

leakage may occur. If liquid comes in contact with your skin,

wash immediately with soap and water, then neutralize with

lemon juice or vinegar. If liquid gets in your eyes, ush them

with clean water for at least 10 minutes, then seek immediate

medical attention.

Following this rule will reduce the risk of serious

personal injury.

Do not let gasoline, oils, petroleum-based products, etc., come

in contact with plastic parts.

These substances contain chemicals

that can damage, weaken or destroy plastic.

Replace battery pack if a substantial drop in operating time per

charge is observed.

Battery pack may be nearing the end of its

life.

Have your power tool serviced by a qualied repair person

using only identical replacement parts.

This will ensure that the

safety of the power tool is maintained.

Save these instructions. Refer to them frequently and use them

to instruct others who may use this tool.

If you lend someone

this tool, lend them these instructions also to prevent misuse of the

product and possible injury.

6

SYMBOLS

Safety Symbols

The purpose of safety symbols is to attract your attention to

possible dangers. The safety symbols and the explanations with

them deserve your careful attention and understanding. The

symbol warnings do not, by themselves, eliminate any danger. The

instructions and warnings they give are no substitutes for proper

accident prevention measures.

WARNING

Be sure to read and understand all safety

instructions in this Owner’s Manual, including

all safety alert symbols such as “

DANGER

,” “

WARNING

,” and

“

CAUTION

” before using this tool. Failure to following all instructions

listed below may result in electric shock, re, and/or serious

personal injury.

The denitions below describe the level of severity for each

signal word. Please read the manual and pay attention to these

symbols.

This is the safety alert symbol. It is

used to alert you to potential personal

injury hazards. Obey all safety

messages that follow this symbol to

avoid possible injury or death.

DANGER

DANGER indicates a hazardous

situation which, if not avoided, will

result in death or serious injury.

WARNING

WARNING indicates a hazardous

situation which, if not avoided, could

result in death or serious injury.

7

CAUTION

CAUTION, used with the safety alert

symbol, indicates a hazardous situation

which, if not avoided, will result in

minor or moderate injury.

Damage Prevention and Information Messages

These inform the user of important information and/or instructions

that could lead to equipment or other property damage if they are

not followed. Each message is preceded by the word “NOTICE”, as

in the example below:

NOTICE:

Equipment and/or property damage may result if these

instructions are not followed.

WARNING

The operation of any power

tools can result in

foreign

objects being thrown into your eyes, which can

result in severe eye damage. Before beginning

power tool operation, always wear safety goggles

or safety glasses with side shields and a full face

shield when needed. We recommend a Wide Vision

Safety Mask for use over eyeglasses or standard

safety glasses with side shields. Always use eye

protection which is marked to comply with

ANSI Z87.1.

8

SYMBOLS (CONTINUED)

IMPORTANT:

Some of the following symbols may be used on

your tool. Please study them and learn their meaning. Proper

interpretation of these symbols will allow you to operate the tool

better and more safely.

Symbol Name Designation/Explanation

V Volts Voltage (potential)

A Amperes Current

Hz Hertz

Frequency (cycles per

second)

W Watt Power

kg Kilograms Weight

min Minutes Time

s Seconds Time

Wh Watt-hours Battery capacity

Ah Ampere-Hours Battery capacity

…/min

Revolutions or

reciprocation per

minute

Revolutions, strokes,

surface speed, orbits, etc.

per minute

Direct current

Type or a characteristic of

current

Earthing terminal Grounding terminal

Li-ion RBRC seal

Designates Li-ion battery

recycling program

9

Symbol Name Designation/Explanation

Read manual symbol Alerts user to read manual

Wear eye protection

symbol

Always wear safety goggles

or safety glasses with side

shields and a full face shield

when operating this product.

SYMBOLS (CERTIFICATION INFORMATION)

IMPORTANT:

Some of the following symbols for certication

information may be used on your tool. Please study them and learn

their meaning. Proper interpretation of these symbols will allow you

to operate the tool better and more safely.

Symbol Designation/Explanation