LG 55LM8600 Le manuel du propriétaire

www.lg.comP/NO : MFL67468152 (1206-REV02)

Please read this manual carefully before operating your set

and retain it for future reference.

OWNER’S MANUAL

LED LCD TV

47LM8600

55LM8600



Do not use this apparatus near water.

Short-circuit

Breaker

Power Supply



Clean only with a dry cloth.

Short-circuit

Breaker

Power Supply



Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

Short-circuit

Breaker

Power Supply



Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Short-circuit

Breaker

Power Supply



Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet (Can differ by country).

Short-circuit

Breaker

Power Supply

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance

of your product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Short-circuit

Breaker

Power Supply

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER

TO QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

2

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

3

IMPORTANT SAFETY INSTRUCTIONS

y

Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

Short-circuit

Breaker

Power Supply

y

Only use attachments/accessories specified

by the manufacturer.

Short-circuit

Breaker

Power Supply

y

Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

Short-circuit

Breaker

Power Supply

y

Unplug this apparatus during lightning

storms or when unused for long periods of

time.

Short-circuit

Breaker

Power Supply

y

Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Short-circuit

Breaker

Power Supply

y

Do not stick metal objects or any other

conductive material into the power cord. Do

not touch the end of the power cord while it

is plugged in.

y

Keep the packing anti-moisture material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach of

children.

y

CAUTION concerning the Power Cord

(Can differ by country):

It is recommended that appliances be

placed upon a dedicated circuit; that is, a

single outlet circuit which powers only that

appliance and has no additional outlets or

branch circuits. Check the specification page

of this owner’s manual to be certain. Do not

connect too many appliances to the same

AC power outlet as this could result in fire or

electric shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power

cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could

result in electric shock or fire. Periodically

examine the cord of your appliance, and

if its appearance indicates damage or

deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced

with an exact replacement part by an

authorized service. Protect the power cord

from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where

the cord exits the appliance. Do not move

the TV with the power cord plugged in. Do

not use a damaged or loose power cord. Be

sure do grasp the plug when unplugging the

power cord. Do not pull on the power cord

to unplug the TV.

Short-circuit

Breaker

Power Supply

ENGLISH

4

IMPORTANT SAFETY INSTRUCTIONS

y

Warning

- To reduce the risk of fire or

electrical shock, do not expose this product

to rain, moisture or other liquids. Do not

touch the TV with wet hands. Do not install

this product near flammable objects such

as gasoline or candles, or expose the TV to

direct air conditioning.

Short-circuit

Breaker

Power Supply

y

Do not expose to dripping or splashing and

do not place objects filled with liquids, such

as vases, cups, etc. on or over the apparatus

(e.g. on shelves above the unit).

Short-circuit

Breaker

Power Supply

y

Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC

plug must be connected to a three-prong

grounded AC outlet). If grounding methods

are not possible, have a qualified electrician

install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone

wires, lightening rods, or gas pipes.

Short-circuit

Breaker

Power Supply

y

DISCONNECTING DEVICE FROM THE MAIN

POWER

Mains plug is the disconnecting device. The

plug must remain readily operable.

y

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the

AC power source even if the unit is turned

off.

y

Do not attempt to modify this product in any

way without written authorization from LG

Electronics. Unauthorized modification could

void the user’s authority to operate this

product.

y

ANTENNAS Outdoor antenna grounding

(Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity

of overhead power lines or other electric light

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

U.S.A. provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Short-circuit

Breaker

Power Supply

NEC: National Electrical Code

Ground Clamp

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Electric Service

Equipment

Ground Clamp

ENGLISH

5

IMPORTANT SAFETY INSTRUCTIONS

y

Cleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

may occur. Do not clean with chemicals

such as alcohol, thinners or benzine.

y

Moving

Make sure the product is turned off,

unplugged and all cables have been

removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress

on the front panel of the TV.

y

Ventilation

Install your TV where there is proper

ventilation. Do not install in a confined

space such as a bookcase. Do not cover the

product with cloth or other materials while

plugged. Do not install in excessively dusty

places.

y

If you smell smoke or other odors coming

from the TV, unplug the power cord and

contact an authorized service center.

y

Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil

or pen, or make a scratch on it.

y

Keep the product away from direct sunlight.

Short-circuit

Breaker

Power Supply

y

Never touch this apparatus or antenna during

a thunder or lightning storm.

y

When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.

y

Do not allow an impact shock or any objects

to fall into the product, and do not drop

anything onto the screen.

y

Dot Defect

The Plasma or LCD panel is a high

technology product with resolution of two

million to six million pixels. In a very few

cases, you could see fine dots on the screen

while you’re viewing the TV. Those dots

are deactivated pixels and do not affect the

performance and reliability of the TV.

y

Generated Sound

“Cracking” noise: A cracking noise that

occurs when watching or turning off the TV

is generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

Electrical circuit humming/panel buzzing: A

low level noise is generated from a high-

speed switching circuit, which supplies a

large amount of current to operate a product.

It varies depending on the product.

This generated sound does not affect the

performance and reliability of the product.

y

Take care not to touch the ventilation

openings. When watching the TV for a long

period, the ventilation openings may become

hot. This does not affect the performance of

the product or cause defects in the product.

y

If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on. This

is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the TV’s performance. Avoid

touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary

distortion effects on the screen.

ENGLISH

6

IMPORTANT SAFETY INSTRUCTIONS

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains

a small amount of mercury. Do not dispose of this

product with general household waste. Disposal of

this product must be carried out in accordance to

the regulations of your local authority.

Preventing “Image burn” or “Burn-in” on your TV screen

y

If a fixed image displays on the TV screen

for a long period of time, it will be imprinted

and become a permanent disfigurement on

the screen. This is “image burn” or “burn-in”

and not covered by the warranty.

y

If the aspect ratio of the TV is set to 4:3 for

a long period of time, image burn may occur

on the letterboxed area of the screen.

y

Avoid displaying a fixed image on the TV

screen for a long period of time (2 or more

hours for LCD, 1 or more hours for the

Plasma TV) to prevent image burn.

For USA and Canada

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the

National Electric Code (U.S.A.). The code provides

guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected

to the grounding system of the building, as close

to the point of the cable entry as practical.

ENGLISH

7

IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging

WARNING

Viewing Environment

y

Viewing Time

- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long

period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

y

Some users may experience a seizure or other abnormal symptoms when they are exposed to a

flashing light or particular pattern from 3D contents.

y

Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as

epilepsy, cardiac disorder, or blood pressure disease, etc.

y

3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.

Double images or discomfort in viewing may be experienced.

y

If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble

sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than

the average adult.

y

If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D

contents.

Symptoms which require discontinuation or refraining from watching 3D contents

y

Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.

y

When these symptoms are experienced, stop using/watching 3D contents and get enough rest until

the symptom subsides.

- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,

dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

ENGLISH

8

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

Viewing Environment

y

Viewing Distance

- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you

feel discomfort in viewing 3D contents, move further away from the TV.

Viewing Age

y

Infants / Children

- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.

- Children under the age of 10 may overreact and become overly excited because their vision is in

development (for example: trying to touch the screen or trying to jump into it. Special monitoring and

extra attention is required for children watching 3D contents.

- Children have greater binocular disparity of 3D presentations than adults because the distance

between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth

compared to adults for the same 3D image.

y

Teenagers

- Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to

watch 3D videos for a long time when they are tired.

y

Elderly

- The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the

recommended distance.

Cautions when using the 3D glasses

y

Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

y

Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

y

Using modified 3D glasses may cause eye strain or image distortion.

y

Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

y

The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when

wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them

with chemicals.

ENGLISH

9

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX

®

is a digital video format created by DivX, LLC, a

subsidiary of Rovi Corporation. This is an official DivX Certified

®

device that plays

DivX video. Visit divx.com for more information and software tools to convert your

files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified

®

device must be registered

in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your

registration code, locate the DivX VOD section in your device setup menu. Go to

vod.divx.com for more information on how to complete your registration.

“DivX Certified

®

to play DivX

®

video up to HD 1080p, including premium content.”

“DivX

®

, DivX Certified

®

and associated logos are trademarks of Rovi Corporation

or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents:

7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;

6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol

& DTS and the Symbol together are registered trademarks & DTS 2.0+Digital

Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights

Reserved.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this

product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of media, shipping and handling) upon email request to

[email protected]. This offer is valid for three (3) years from the date on which you purchased the

product.

ENGLISH

10

TABLE OF CONTENTS

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may

differ slightly from that shown in this

manual.

y

The available menus and options may differ

from the input source or product model that

you are using.

y

New features may be added to this TV in

the future.

NOTE

2 IMPORTANT SAFETY INSTRUCTIONS

7 Viewing 3D Imaging

9 LICENSES

9 OPEN SOURCE SOFTWARE NOTICE

10 TABLE OF CONTENTS

11 INSTALLATION PROCEDURE

11 ASSEMBLING AND PREPARING

11 Unpacking

13 Optional Extras

14 Parts and buttons

15 Lifting and moving the TV

16 Setting up the TV

16 - Attaching the stand

18 - Mounting on a table

19 - Tidying cables

20 - Mounting on a wall

21 MAKING CONNECTIONS

21 Connecting to an antenna or cable

22 Connecting to a HD receiver, DVD, or VCR

player

22 - HDMI Connection

23 - DVI to HDMI Connection

24 - Connecting to a mobile phone

25 - Component Connection

26 - Composite Connection

27 Connecting to a PC

27 - HDMI Connection, DVI to HDMI

Connection or RGB Connection

29 Connecting to an Audio System

29 - Digital Optical Audio Connection

30 Connecting to a USB

31 REMOTE CONTROL

31 Magic Remote Control Functions

32 - Registering Magic Remote Control

32 - How to use Magic Remote Control

32 - Precautions to Take when Using the

Magic Remote Control

33 WATCHING TV

33 Turning the TV on for the first time

34 USING THE USER GUIDE

35 SPECIFICATIONS

39 MAINTENANCE

39 Cleaning Your TV

39 - Screen, frame, cabinet and stand

39 - Power cord

39 TROUBLESHOOTING

ENGLISH

11

ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

1

Open the package and make sure all the accessories are included.

2

Attach the stand to the TV set.

3

Connect an external device to the TV set.

4

Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the warranty.

y

In case of some model, the thin film on screen is a part of TV, So don’t take it off.

CAUTION

y

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

y

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39

inches) thick and 18 mm (0.7 inches) width.

y

Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit

into your TV’s USB port.

B

A

B

*A

10 mm (0.39 inches)

*B

18 mm (0.7 inches)

NOTE

ENGLISH

12

ASSEMBLING AND PREPARING

Magic remote control,

Batteries (AA)

(See p.31)

Owner’s manual Cinema 3D glasses

The number of 3D glasses

may differ depending on the

model or country.

Stand body

(See p.16)

Stand base

(See p.16)

Stand screws

8 EA, M4 x 20

(See p.16)

Cable holder

(See p.19)

Component video cable

(See p.25)

Composite video cable

(See p.25, 26)

Polishing cloth

(Depending on model)

Use this to remove dust

from the cabinet.

ENGLISH

13

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

These devices only work with certain models.

AN-MR300

Magic remote control

AG-F2**, AG-F3**

Cinema 3D glasses

The model name or design may be changed manufacturer’s circumstances or policies.

ENGLISH

14

ASSEMBLING AND PREPARING

Parts and buttons

Button Description

/ (^ / v) Scrolls through the saved channels.

/ (+ / -)

Adjusts the volume level.

(OK

⊙

)

Selects the highlighted menu option or confirms an input.

(SETTINGS)

Accesses the main menus, or saves your input and exits the menus.

(INPUT)

Changes the input source.

(

ꔰ

/ I)

Turns the power on or off.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

Speakers

Screen

Buttons

LG Logo Light

Power indicator

Remote control and

intelligent

1

sensors

ENGLISH

15

ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following

to prevent the TV from being scratched or

damaged and for safe transportation regardless of

its type and size.

y

Avoid touching the screen at all times, as

this may result in damage to the screen.

CAUTION

y

It is recommended to move the TV in the

box or packing material that the TV originally

came in.

y

Before moving or lifting the TV, disconnect

the power cord and all cables.

y

When holding the TV, the screen should face

away from you to avoid damage.

y

Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

y

When transporting a large TV, there should

be at least 2 people.

y

When transporting the TV by hand, hold the

TV as shown in the following illustration.

y

When transporting the TV, do not expose the

TV to jolts or excessive vibration.

y

When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

y

Whenever you handle TV, Protection pad

should be covered with side of TV.

Protection pad

ENGLISH

16

ASSEMBLING AND PREPARING

y

When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect

the screen from scratches.

CAUTION

2

Setting up the TV

Put your TV on a pedestal stand and mount the TV on a table or wall.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

1

Front

Top View

Stand Body

Stand Base

M4 x 20

4 EA

3

ENGLISH

17

ASSEMBLING AND PREPARING

y

Remove the stand before installing the TV

on a wall mount by performing the stand

attachment in reverse.

NOTE

y

Remove protection pads after installing

TV.

CAUTION

5

y

Make sure that the screws are fastened

completely. (If they are not fastened

securely enough, the TV may tilt forward

after being installed.)

y

Do not fasten the screws with too much

force; otherwise they may be worn out

and get loosened.

CAUTION

4

M4 x 20

4 EA

Protection pad

ENGLISH

18

ASSEMBLING AND PREPARING

Mounting on a table

1

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (4 inch) (minimum) space from

the wall for proper ventilation.

10 cm

(4

in

ch

es)

2

Connect the power cord to a wall outlet.

y

Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

CAUTION

Adjusting the angle of the TV to suit view

Swivel 10 degrees to the left or right and adjust

the angle of the TV to suit your view.

10˚10˚

y

When adjusting the angle of the TV, watch

out for your fingers.

- Personal injury may occur if hands or

fingers are pinched. If the product is tilted

too much, it may fall, causing damage or

injury.

Rear

Front

CAUTION

ENGLISH

19

ASSEMBLING AND PREPARING

Securing the TV to a wall (optional)

1

Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2

Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

3

Connect the eye-bolts and wall brackets tightly

with a sturdy rope.

Make sure to keep the rope horizontal with the

flat surface.

y

Make sure that children do not climb on or

hang on the TV.

CAUTION

y

Use a platform or cabinet that is strong and

large enough to support the TV securely.

y

Brackets, bolts and ropes are optional. You

can obtain additional accessories from your

local dealer.

NOTE

Tidying cables

1

Gather and bind the cables with the cable

management clip.

Cable management clip

2

Gather and bind the cables with the cable

holder on the back of the TV.

Cable holder

y

Do not move the TV by holding the cable

holder and cable management clip, as the

cable holders may break, and injuries and

damage to the TV may occur.

CAUTION

ENGLISH

20

ASSEMBLING AND PREPARING

Mounting on a wall

Attach an optional wall mount bracket at the rear

of the TV carefully and install the wall mount

bracket on a solid wall perpendicular to the

floor. When you attach the TV to other building

materials, please contact qualified personnel.

We recommend that you use an LG brand wall

mount when mounting the TV to a wall.

10 cm

(4

in

ch

es)

Make sure to use screws and wall mounts that

meet the VESA standard. Standard dimensions for

the wall mount kits are described in the following

table.

Model 47LM8600

55LM8600

VESA (A x B)

A

B

400 x 400

Standard screw M6

Number of screws 4

Wall mount bracket

(optional)

LSW400BX

LSW420BX

y

Disconnect the power first, and then move

or install the TV. Otherwise electric shock

may occur.

y

If you install the TV on a ceiling or slanted

wall, it may fall and result in severe injury.

Use an authorized LG wall mount and

contact the local dealer or qualified

personnel.

y

Do not over tighten the screws as this may

cause damage to the TV and void your

warranty.

y

Use the screws and wall mounts that meet

the VESA standard. Any damages or injuries

by misuse or using an improper accessory

are not covered by the warranty.

CAUTION

y

Use the screws that are listed on the VESA

standard screw specifications.

y

The wall mount kit includes an installation

manual and necessary parts.

y

The wall mount bracket is optional. You can

obtain additional accessories from your local

dealer.

y

The length of screws may differ depending

on the wall mount. Make sure to use the

proper length.

y

For more information, refer to the manual

supplied with the wall mount.

NOTE

Attaching the wall mount bracket

1

In order to protect the TV screen (scratch,

fingerprint), put TV on flat table without

removing wrapping bag.

2

After removing the wrapping bag on the back

of the TV, install TV according to manual

included in wall mounting bracket product.

3

Remove protection pads after installing TV.

La page est en cours de chargement...

LG 55LM8600 Le manuel du propriétaire

LG 55LM8600 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents