LG LTE4815ST Le manuel du propriétaire

ENGLISH FraNçaIS

OWNER’S MANUAL

ELECTRIC

RANGE

Read this owner’s manual thoroughly before operating the appliance

and keep it handy for reference at all times.

www.lg.com

MFL69300810_03

LTE4815**

2

TABLE OF CONTENTS

3

IMPORTANT SAFETY

INSTRUCTIONS

9

PRODUCT OVERVIEW

9 Parts

9 Accessories

10

INSTALLATION

10 Installation Overview

10 Product Specifications

11 Before Installing the Range

12 Installing the Range

14 Electrical Connection Requirements

15 Engaging the Anti-tip Device

15 Optional Rear Filler

15 Test Run

16

OPERATION

16 Control Panel Overview

17 Knob Position

18 Changing Oven Settings

18 Clock

18 Oven Light

18 Minimum & Maximum Default Settings

19 Timer On/Off

19 Wi-Fi

19 Settings

-

Setting the Hour Mode

-

Setting Convection Auto Conversion

-

Adjusting the Oven Temperature

-

Turning the Preheat Alarm Light On/Off

-

Adjusting the Beeper Volume

-

Adjusting Cooktop On Alert Volume

-

Selecting Fahrenheit or Celsius

20 Lockout

21 Start Time (Delayed Timed Cook)

21 Cook Time (Timed Cook)

22 Using the Cooktop

22 Cooking Areas

22 Hot Surface Indicator

22 Using the Cooktop Elements

23 The Recommended Surface Cooking

Setting

24 Using the Proper Cookware

24 Choosing Cookware

24 Home Canning Tips

25 Using the Oven

25 Before Using the Oven

25 Oven Vent

25 Using Oven Racks

25 Bake

26 Convection Mode

27 Recommended Baking and Roasting Guide

28 Broil

29 Recommended Broiling Guide

30 Warm

30 Proof

31 Meat Probe

32 Remote Start

33

SMART FUNCTIONS

33 LG SmartThinQ Application

34 Smart Diagnosis™ Function

35 Industry Canada Statement

35 IC Radiation Exposure Statement

36

MAINTENANCE

36 Cleaning the Glass-Ceramic Cooktop

37 EasyClean

®

40 Self Clean

42 Changing the Oven Light

42 Cleaning the Exterior

44 Removing and Replacing the Lift-Off Oven

Doors

45 Door Care Instructions

46

TROUBLESHOOTING

46 FAQs

48 Before Calling for Service

52

LIMITED WARRANTY

3

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions when using the range to prevent the risk of fire, electric

shock, personal injury, or damage. This guide does not cover all possible conditions that

may occur. Always contact your service agent or manufacturer about problems that you do

not understand.

Download this owner's manual at: http://www.lg.com

This is the safety alert symbol. This symbol alerts you to potential hazards that

can result in property damage and/or serious bodily harm or death.

All safety messages will follow the safety alert symbol and either the word

WARNING or CAUTION. These words mean:

WARNING

-

Indicates a hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION

-

Indicates a hazardous situation which, if not avoided, could result

in minor or moderate injury.

ANTI-TIP DEVICE

WARNING

TO REDUCE THE RISK OF TIPPING, THE APPLIANCE MUST BE SECURED BY A

PROPERLY INSTALLED ANTI-TIP DEVICE. TO CHECK IF THE DEVICE IS INSTALLED

PROPERLY, REMOVE THE DRAWER BODY AND VERIFY THAT THE ANTI-TIP

DEVICE IS ENGAGED, OR GRASP THE TOP REAR EDGE OF THE RANGE BACK

GUARD AND CAREFULLY ATTEMPT TO TILT IT FORWARD. Refer to the installation

section for instructions.

•

It is possible for a child or adult to tip the range and be killed.

•

Verify that the anti-tip device has been properly installed and

attached to the floor or wall and engaged to the leveling leg of the

range.

•

Do not operate the range without the anti-tip device in place and

engaged.

•

Never remove the oven legs. The range will not be secured to the

anti-tip bracket if the legs are removed.

•

Do not step or sit on the oven door. The range could be tipped and

injury might result from spilled hot liquid, food, or the range itself.

•

Do not rest large, heavy items such as whole turkeys on the open

oven door. The range could tip forward and cause injury.

•

Reengage the anti-tip device after pulling the range out for

cleaning, service, or any other reason.

•

Failure to follow these instructions can result in death or serious burns to children or

adults.

Anti-tip

bracket

Leveling

leg

4

IMPORTANT SAFETY INSTRUCTIONS

SAFETY PRECAUTIONS

•

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN. Heating

elements may be hot even though they are dark in color. Interior surfaces of an oven

become hot enough to cause burns. During and after use, do not touch or let clothing or

other flammable materials contact heating elements or interior surfaces of oven until they

have had sufficient time to cool. Other surfaces, such as oven vent openings and surfaces

near these openings, oven doors, and windows of oven doors, also get hot and may cause

burns if not cooled.

•

Use care when opening door. The hot air and steam that escape can cause burns to

hands, face and eyes. Let hot air or steam escape from the oven before removing or

replacing food in the oven.

•

Do not repair or replace any part of the appliance unless specifically recommended in the

manual. All other servicing should be performed by a qualified technician.

•

Do not use harsh etching, abrasive cleaners or sharp metal scrapers to clean the oven

door glass since they can scratch the surface. Scratches may cause the glass to shatter.

WARNING

If the door glass, cooktop glass, surface, or oven heating unit of the range are damaged,

discontinue use of the range and call for service.

•

Do not operate the oven without the charcoal heater mesh.

•

Do not use plastic to cover food. Use foil or oven-safe lids only.

•

Do not allow anyone to climb, stand or hang on the door, storage drawer or cooktop. They

could damage the range and even tip it over, causing severe personal injury.

•

Do not line the oven walls, racks, bottom, or any other part of the oven with aluminum foil

or any other material. Doing so will disrupt heat distribution, produce poor baking results

and cause permanent damage to the oven interior (aluminum foil will melt to the interior

surface of the oven)

•

Never attempt to dry a pet in the oven.

•

Never use your appliance for warming or heating the room.

•

Always use pot holders or oven mitts when removing food from the oven or the surface

element. Cookware will be hot. Use only dry pot holders. Moist or damp pot holders on

hot surfaces may result in burns from steam. Do not let the pot holder touch hot heating

elements. Do not use a towel or other bulky cloth to remove food.

•

Do not heat unopened food containers. Pressure in the containers may cause them to

burst which may result in injury.

•

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage

space located above the surface units should be avoided. If cabinet storage is to be

provided, the risk can be reduced by installing a range hood that projects horizontally a

minimum of 5 inches beyond the bottom of the cabinets.

5

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

FLAMMABLE MATERIALS

WARNING

Be certain that all packing materials are removed from the appliance before operating.

Keep plastic, clothes, paper, and other flammable materials away from parts of the

appliance that may become hot.

•

Do not store or use flammable material in the oven or near or on the cooktop. Flammable

materials include paper, plastic, pot holders, linens, wall coverings, curtains, and gasoline

or other flammable vapors and liquids such as grease or cooking oil. These materials can

be ignited when the oven and cooktop are in use.

•

Wear proper apparel. Do not wear loose-fitting or hanging garments, which may ignite if

they contact hot surfaces, and cause severe burns.

•

Do not use the oven for drying clothes. Only use the oven for its intended purpose.

•

If a cabinet storage is provided directly above cooking surface, place items that are not

frequently used and can be safely stored in an area subjected to heat. Temperatures may

be unsafe for volatile items such as flammable liquids, cleaners or aerosol sprays.

ELECTRICAL SAFETY

CAUTION

Be certain that all packing materials are removed from the appliance before operating.

Keep plastic, clothes, paper, and other flammable materials away from parts of the

appliance that may become hot.

•

Always disconnect power from the appliance before servicing.

•

Do not use aluminum foil or any other material to line the oven bottom.

Improper installation of these liners may result in a risk of electric shock or fire.

•

Do not allow aluminum foil or the temperature probe to contact heating elements.

WARNING

Before replacing the oven light bulb, switch off the electrical power to the oven at the

main fuse or circuit breaker panel. Failure to do so can result in severe personal injury,

death, or electrical shock.

DEEP FAT FRYER

•

Use extreme caution when moving or disposing of hot grease.

•

Always heat fat slowly, and watch as it heats.

•

If frying combinations of oils and fats, stir them together before heating.

•

Use a deep fat thermometer, if possible, to prevent overheating fat beyond the smoking

point.

•

Use the least possible amount of fat for effective shallow or deep-fat frying. Filling the pan

with too much fat can cause spillovers when food is added.

6

IMPORTANT SAFETY INSTRUCTIONS

CHILD SAFETY

•

Do not touch the hot surface between the bottom of the oven door and the top of the

drawer on the front of the oven while the oven is in operation. The surface becomes hot

and can cause burns and other injury.

•

Do not leave small children unattended near the oven.

WARNING

Do not leave children alone or unsupervised near the appliance when it is in use or is

still hot. Children should never be allowed to sit or stand on any part of the appliance as

they could be injured or burned.

CAUTION

Do not store items of interest to children in cabinets above a range or on the back guard

of a range – children climbing on the range to reach items could be seriously injured.

•

Never let a child hang on the oven door.

•

Do not allow children to crawl into the oven.

•

Let hot utensils cool in a safe place, out of reach of small children.

•

Children should not be allowed to play with controls or other parts of the appliance.

GLASS-CERAMIC COOKING SURFACE

•

Surface units may be hot even though they are dark in color. Areas near surface units may

become hot enough to cause burns. During and after use, DO NOT TOUCH SURFACE

UNITS OR AREAS NEAR UNITS or let clothing or other flammable materials contact

surface units or areas near units until they have had sufficient time to cool. This includes

the cooktop and the area above the oven door.

•

Do not cook on a broken cooktop. If the cooktop is broken, cleaning solutions and

spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a

qualified technician immediately.

•

Do not use the glass cooktop surface as a cutting board.

•

Do not place or store items that can melt or catch fire on the glass cooktop, even when it

is not being used.

•

Choose proper burner size. For smaller pots and pans, use the smaller heating

elements. For larger pots and pans, use the larger heating elements. Select pans that

have flat bottoms large enough to cover the heating elements. Using undersized pans

exposes a portion of the heating element to direct contact and may result in clothing

burning.

•

Glazed cookware. Only certain types of glass, glass-ceramic, ceramic, earthenware,

or other glazed cookware are suitable for range-top service without breaking due to the

sudden change in temperature.

•

Never cook directly on the glass. Always use cookware.

•

Always turn the surface units off before removing cookware.

•

Turn cookware handles inward so they don't extend over adjacent surface units.

This reduces the risk of burns, ignition of flammable materials, and spillage due to

unintentional contact with the cookware.

•

Immediately clean spills on the cooking area to prevent a tough cleaning chore later.

•

Some cleaners can produce dangerous fumes if applied to a hot surface.

7

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

•

Always place the pan in the center of the surface unit you are cooking on. Never leave

surface units unattended at high heat settings. Proper contact of cookware to burner

also will improve efficiency. Boilovers cause smoking and greasy spills that may catch on

fire.

•

Clean cooktop with caution. Do not use sponges or cloth to wipe spills on a hot cooking

area. Use a proper metal scraper. If a wet sponge or cloth is used to wipe spills on a hot

cooking area, it can cause steam burns. Some cleaners can produce noxious fumes if

applied to a hot surface.

•

Do not turn surface units on before placing cookware.

•

Do not store heavy items above the cooktop surface that could fall and damage it.

•

Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon

holders, or plastic wrappings or any other material on the range when it is in use.

•

Do not use a steel-wool pad or scrub pad or abrasive cleaning pads. They can scratch the

surface.

ENERGY SAVING TIPS

•

Multiple-rack cooking saves time and energy. Whenever possible, cook foods requiring the

same cooking temperature together in one oven.

•

For optimal performance and energy savings, follow the guides on page 27 for proper rack

and pan placements.

•

Match the size of the cookware to the amount of food being cooked to save energy when

heating. Heating ½ quart of water requires more energy in a 3-quart pot than in a 1-quart

pot.

•

Use cookware with flat bottoms to provide the best contact with the cooktop surface when

cooking on the glass-ceramic cooktop.

•

Match the size of the cooktop burner or element to the size of the cookware in use. Using

a large element for a small pan wastes heating energy, and the exposed surface of the

element is a burn or fire hazard.

•

Reduce energy use by cleaning light oven soils with the EasyClean

®

feature instead of

self-clean.

•

Avoid opening the oven door more than necessary during use. This helps the oven

maintain temperature, prevents unnecessary heat loss, and saves on energy use.

SAFETY DURING USE

•

Do not touch the oven racks while they are hot.

•

If a rack must be moved while the oven is hot, do not let the pot holder contact the hot

heating element in the oven.

•

Use caution with the Timed Cook or Delayed Timed Cook features. Use the automatic

timer when cooking cured or frozen meats and most fruits and vegetables. Foods that can

easily spoil, such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator

first. Even when chilled, they should not stand in the oven for more than 1 hour before

cooking begins, and should be removed promptly when cooking is complete. Eating

spoiled food can result in sickness from food poisoning.

•

Accessible parts may become hot when the grill is in use.

•

Do not place food or cookware on the bottom of the oven cavity. Doing so will cause

permanent damage to the oven bottom finish.

•

Do not use water on grease fires. Should an oven fire occur, leave the oven door closed

and turn the oven off. If the fire continues, throw baking soda on the fire or use a fire

extinguisher. Do not put water or flour on the fire. Flour may be explosive and water can

spread a grease fire and cause personal injury.

8

IMPORTANT SAFETY INSTRUCTIONS

•

Pull the oven rack to the stop-lock position when loading and unloading food from the

oven. This helps prevent burns caused by touching hot surfaces of the door and oven

walls.

•

Do not use the oven if a heating element develops a glowing spot during use or shows

other signs of damage. A glowing spot indicates the heating element may fail and present

a potential burn, fire, or shock hazard. Turn the oven off immediately and have the heating

element replaced by a qualified service technician.

•

When using cooking or roasting bags in the oven, follow the manufacturer’s directions.

SAFETY WHEN CLEANING

•

Open a window or turn on a ventilation fan or hood before self-cleaning.

•

If the oven is heavily soiled with oil, self-clean the oven before using the oven again. The

oil could cause a fire.

•

Wipe up heavy soil on the bottom of the oven before using the Self Clean function.

•

Do not use oven cleaners. Commercial oven cleaner or oven liner protective coating of

any kind should not be used in or around any part of the oven.

•

Never keep pet birds in the kitchen. The health of birds is extremely sensitive to the fumes

released during an oven self-clean cycle. Fumes may be harmful or fatal to birds. Move

birds to a well-ventilated room.

•

Clean in the self-clean cycle only parts listed in this manual. Before self-cleaning the oven,

remove the broiler pan, all oven racks, the meat probe and any utensils or food from the

oven.

•

Important Instruction. The oven displays an F error code and sounds three long beeps

during the self-cleaning process if it malfunctions in the self-clean mode. Switch off the

electrical power to the main fuse or breaker and have the oven serviced by a qualified

technician.

•

It is normal for the cooktop of the range to become hot during a self-clean cycle.

Therefore, touching the cooktop during a self-clean cycle should be avoided.

•

Never pour cold water over a hot oven for cleaning. Doing so may cause the oven to

malfunction.

•

Make sure oven lights are cool before cleaning.

•

Do not clean door gasket. The door gasket is essential for a good seal. Care should be

taken not to rub, damage, or move the gasket.

•

If there is a fire in the oven during self-clean, turn the oven off and wait for the fire to go

out. Do not force the door open. Introduction of fresh air at self-clean temperatures may

lead to a burst of flame from the oven. Failure to follow this instruction may result in severe

burns.

COOK MEAT AND POULTRY THOROUGHLY

•

To protect against food-borne illnesses, cook meat and poultry thoroughly. The USDA has

indicated the following as safe minimum internal temperatures for consumption:

•

Ground beef, veal, pork, or lamb: 160 °F

•

Poultry: 165 °F

•

Beef, veal, pork, or lamb: 145 °F

•

Fish/seafood: 145 °F

9

PRODUCT OVERVIEW

ENGLISH

PRODUCT OVERVIEW

Parts

Oven mode knob

Gasket

Rack

Model & serial

number plate

Cooktop

controller

Upper

oven door

Lower

oven door

Cooktop

Control panel

Accessories

Included Accessories

Rack (2ea)

Gliding rack (1ea) Spray bottle

(1ea)

Non-scratch scouring pad

(1ea)

Cleaner

Meat probe (1ea) Rear ller (1ea) Owner’s manual

(1ea)

Cooktop cleaner

(1ea)

Anti-tip kit

Anti-tip (1ea) Screws (6ea) Anchors (6ea) Template (1ea)

Optional Accessories

Grid Broiler pan

NOTE

•

Contact LG Customer Service at 1-800-243-0000 (1-888-542-2623 in Canada) if any accessories are

missing.

•

For your safety and for extended product life, only use authorized components.

•

The manufacturer is not responsible for product malfunction or accidents caused by the use of separately

purchased, unauthorized components or parts.

•

The images in this guide may be different from the actual components and accessories, which are subject

to change by the manufacturer without prior notice for product improvement purposes.

10

INSTALLATION

Installation Overview

Please read the following installation instructions first after purchasing this product or transporting it to another

location.

Check and choose the

proper location

Install anti-tip device Level the range

Plug in the power cord Engage the anti-tip device Test run

240V or 208V

Product Specifications

The appearance and specifications listed in this manual may vary due to constant product improvements.

Oven Range Models LTE4815**

Description Electric Slide In Oven Range

Electrical requirements 15.5 kW 120/240 VAC or 11.6 kW 120/208 VAC

Exterior Dimensions

29

7

/

8

" (W) x 37

7

/

8

" (H) x 28

15

/

16

" (D) (D with door closed)

75.9 cm (W) x 96.2 cm (H) x 73.5 cm (D) (D with door closed)

Height to cooking surface 36" (91.4 cm)

Net weight 188.7 lb (85.6 kg)

Total capacity

Upper Oven: 3.0 cu. ft.

Lower Oven: 4.3 cu. ft.

Total cap.: 7.3 cu. ft.

11

INSTALLATION

ENGLISH

Before Installing the Range

WARNING

Tip - Over Hazard

A child or adult can tip the range and

be killed. Verify the anti-tip bracket

has been installed. Ensure the

anti-tip bracket is engaged when the

range is moved.

Do not operate the range without the

anti-tip bracket in place. Failure to

follow these instructions can result

in death or serious burns to children

and adults.

To check that leveling leg is

inserted into anti-tip bracket,

grasp the top rear edge

of the range and carefully

attempt to tilt it forward.

Anti-tip

bracket

Leveling

leg

If you did not receive an anti-tip bracket with your

purchase, call 1-800-243-0000 (1-888-542-2623 in

CANADA) to receive one at no cost.

WARNING

•

The information in this manual should be

followed exactly. Failure to do so may result

in fire, electrical shock, property damage,

personal injury, or death.

•

Wear gloves during the installation

procedure. Failure to do so can result in bodily

injury.

Tools Needed

Phillips screwdriver

Level

Flat-blade screwdriver

Adjustable wrench

1

/

4

" Nut driver

Drill

Pliers

Safety glasses

Tape measure

Gloves

Parts Provided

Template (1) Anti-tip bracket kit (1) Rear ller (1)

Anchor sleeves (6) Lag bolts (6)

NOTE

•

Observe all governing codes and ordinances.

•

Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

•

As when using any appliance generating heat, there are certain safety precautions you should follow.

•

Be sure your range is installed and grounded properly by a qualified installer or service technician.

12

INSTALLATION

Installing the Range

Unpacking and Moving the Range

CAUTION

•

You should use two or more people to move

and install the range. (Excessive Weight

Hazard) Failure to do so can result in back or

other injury.

•

Do not use the door handles to push or

pull the range during installation or when

moving the range out for cleaning or

service. Doing so can result in serious damage

to the door of the range.

Remove packing material, tape and any temporary

labels from your range before using. Do not remove

any warning-type labels, the model and serial number

label, or the Tech Sheet that is located on the back of

the range.

To remove any remaining tape or glue, rub the area

briskly with your thumb. Tape or glue residue can also

be easily removed by rubbing a small amount of liquid

dish soap over the adhesive with your fingers. Wipe

with warm water and dry.

Do not use sharp instruments, rubbing alcohol,

flammable fluids, or abrasive cleaners to remove tape

or glue. These products can damage the surface of

your range.

Your range is heavy and can be installed on soft

floor coverings such as cushioned vinyl or carpeting.

Use care when moving the range on this type of

flooring. Use a belt when moving the range to prevent

damaging the floor. Or slide the range onto cardboard

or plywood to avoid damaging the floor covering.

Choosing the Proper Location

CAUTION

•

Avoid placing cabinets above the range. To

minimize the hazard caused by reaching over

the open flames of operating burners, install a

ventilation hood over the range that projects

forward at least five inches beyond the front of

the cabinets.

•

Make sure wall covering, countertop and

cabinets around the range can withstand

the heat (up to 194 °F) generated by the

range. Discoloration, delamination or melting

may occur. This range has been designed to

comply with the maximum allowable wood

cabinet temperature of 194 °F.

•

Before installing the range in an area

covered with linoleum or other synthetic

floor covering, make sure the floor covering

can withstand temperatures of at least

200 °F (93 °C).

•

Use an insulated pad or

1

/

4

in. (0.64 cm)

plywood under the range if installing the

range over carpeting.

The range should always be plugged into its own

individual properly grounded electrical outlet. This

prevents overloading house wiring circuits which

could cause a fire hazard from overheated wires. It is

recommended that a separate circuit serving only this

appliance be provided.

Mobile Home - Additional Installation

Requirements

The installation of this range must conform to the

Manufactured Home Construction and Safety

Standard, Title 24 CFR, Part 3280 (formerly the

Federal Standard for Mobile Home Construction

and Safety, Title 24, HUD Part 280), or when

such standard is not applicable, the Standard for

Manufactured Home Installations, ANSI A225.1/NFPA

501A or with local codes.

•

When this range is installed in a mobile home, it

must be secured to the floor during transit. Any

method of securing the range is adequate as long

as it conforms to the standards listed above.

•

A four-wire power supply cord or cable must be

used in a mobile home installation.

13

INSTALLATION

ENGLISH

Dimensions and Clearances

NOTE

Save for the use of the local electrical inspector.

3" (7.6 cm)

24"

(60.9 cm)

24"

(60.9 cm)

36"

(91.4 cm)

29.8"

(75.7 cm)

15" (38 cm)

11" (28 cm)

2.5" (6.3 cm)

2.5"

(6.3 cm)

9"

(23 cm)

4"

(10 cm)

9"

(23 cm)

4"

(10 cm)

6"

(15.2 cm)

5"

(13 cm)

6"

(15.2 cm)

25"

(63.5 cm)

36"

(91.4 cm)

3" (7.6 cm)

Acceptable

gas pipe and

electrical

outlet area

Normal counter

top depth

Counter

top height

Cabinet

opening

Wall

Center

Cabinet

A = 30" (76.2 cm) For U.S.A

= 30" (76.2 cm) ~ 31" (78.7 cm) For CANADA

For installation in Canada, a slide-in range is not to be installed closer than

15

/

32

" (12 mm) from any adjacent

surface.

30"

(76.2 cm)

36"

(91.4 cm)

**15"

(38.1 cm)

*30" (76.2 cm)

Minimum

13"

(33.0 cm)

Maximum

depth for

cabinets above

countertops

Front edge of

the range side

panel forward

from cabinet

1

/

4

"

(0.64 cm)

5"(12.7 cm)

Minimum

Minimum Dimensions

* 30" (76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected

wood or metal cabinet; or 24" (60.9 cm) minimum when bottom of wood or metal cabinet is protected by not less

than

1

/

4

" (6.4 cm) flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015"

(0.381 mm)

stainless steel, 0.024" (0.610 mm) aluminum or 0.020" (0.508 mm) copper.

** 15" (38.1 cm) minimum between countertop and adjacent cabinet bottom.

14

INSTALLATION

Installing the Anti-tip Device

Anti-tip

bracket

Leveling

leg

WARNING

Tip - Over Hazard

A child or adult can tip the range and

be killed. Verify the anti-tip bracket

has been installed. Ensure the anti-tip

bracket is engaged when the range

is moved. Do not operate the range

without the anti-tip bracket in place.

Failure to follow these instructions

can result in death or serious burns to

children and adults.

To check that leveling leg is

inserted into anti-tip bracket,

grasp the top rear edge

of the range and carefully

attempt to tilt it forward.

Wall plate

Anti-tip

bracket

Screw must

enter wood or

concrete

Locate the anti-tip bracket using the template

An anti-tip bracket is packaged with the template.

The instructions include necessary information to

complete the installation. Read and follow the range

installation instruction sheet (template).

Leveling the Range

Level the range by adjusting the leveling legs with a

wrench. Extending the legs slightly may also make it

easier to insert the rear leg into the anti-tip bracket.

Use a level to check your adjustments. Place the level

diagonally on the oven rack, and check each direction

for level.

First check direction

.

Then check direction

. If the level doesn’t show level

on the rack, adjust the leveling legs with a wrench.

1

2

Electrical Connection

Requirements

The range must be installed in accordance with Local

and Canadian Electrical Codes (latest edition). See

rating plate for total connected Amp rating. This model

was shipped direct from the factory with Service cord

attached. There are no range connections necessary.

NOTE

Only a range cord rated at 40 amps with 120/240

or 120/208 minimum volt range is required. If a 50

amp range cord is used, it should be marked for

use with 1

3

/

8

"

diameter connection openings.

15

INSTALLATION

ENGLISH

Engaging the Anti-tip Device

•

Move the range close enough to the opening to

plug into the receptacle.

•

Slide the range into position ensuring that the back

leg slides under the anti-tip bracket. The range

should sit flush against the back wall when properly

installed.

•

Carefully attempt to tip the range forward to ensure

that the anti-tip bracket is engaged properly. If

properly installed, the anti-tip bracket will prevent

the range from being tipped. If the range can be

tipped, reinstall the range until the anti-tip bracket is

properly installed and the range will not tip forward.

•

Turn on electrical power. Check the range for

proper operation.

Optional Rear Filler

If the counter does not bridge the opening at the rear

wall, use the rear filler kit provided with the slide-in

range.

NOTE

If the countertop depth is greater than 25" there

will be a gap between the filler kit and the back

wall.

If the countertop depth is less than 24", the control

panel will not sit flush with the countertop.

Installing the Rear Filler

1

Using a screwdriver, remove the three screws

holding the rear bracket in place.

2

Attach the rear bracket and filler assembly as

shown, using the three screws removed in step 1.

Test Run

Check if the range is properly installed and run a test

cycle.

1

Before using the cooktop for the first time, clean

it with a ceramic cooktop cleaner. This helps

protect the top and makes cleanup easier.

2

Touch Upper CLEAR/OFF and LOWER

CLEAR/OFF to start test.

3

Turn each knob to the Hi position to check

that the surface heating elements are working

properly. The elements should glow red and

radiate heat, and they should cycle on and off

periodically even when the knob is in the Hi

position. This cycling prevents the glass-ceramic

from being cracked by thermal shock.

IMPORTANT : The warming zone does not

consume enough power to glow red.

4

After checking all the surface heating elements,

check the locking system by touching Lower

Clear/Off for three seconds. The oven door

should lock and the cooktop should not operate

while the Lockout function is turned on. Touch

Lower Clear/Off for three seconds to disable

Lockout.

5

Now check the oven's operation. Turn the oven

mode knob to select the Bake mode. 350 °F

appears in the display. Press Start.

6

The oven should finish preheating in 15 minutes,

and the convection fan should operate while the

oven is preheating.

7

After checking the oven's operation, turn the

temperature up to 450 °F and leave the oven on

for at least an hour to help remove any oil which

might cause smoke and odors when first using

the oven.

NOTE

Smoke may come out of the range when it is first

used.

16

OPERATION

Control Panel Overview

/RZHU

8SSHU

FRPPRQ

/RZHU

5HPRWH

6WDUW

1

2

10

3 4 5 6 7 8 9

1

Smart Diagnosis

TM

Use during the Smart Diagnosis feature.

2

Cook Time / Clock

•

Press the button to set the desired amount of time

for food to cook. The oven shuts off when the set

cooking time runs out.

•

Press and hold button for three seconds to set the

time of day.

3

Start Time / Setting

•

Press the button to set the delayed timed cook. The

oven starts at the set time.

•

Press and hold button for three seconds to select

and adjust oven settings.

4

Temp.

•

Press the button to change the oven or meat probe

temperature during cooking.

5

Timer On/Off / Wi-Fi

•

Press the button to set or cancel automatic timer.

•

Press and hold button for three seconds to connect

to Wi-Fi network.

6

- /+

Press the plus button to increase cooking time or

oven temperature.

Press the minus button to decrease cooking time or

oven temperature.

7

START / Oven Light

•

Press the button to start all oven features.

•

Press the button to manually turn the oven light on/

off.

8

Upper CLEAR/OFF

Press the button to end all upper oven features.

9

Lower CLEAR/OFF / Lock Out

•

Press the button to end all lower oven feature.

•

Press and hold button for three seconds to lock the

door and control panel.

10

Oven Mode Knob

Turn the knob to select oven operating mode.

17

OPERATION

ENGLISH

Knob Position

After cleaning the oven knobs, make sure to replace each knob in the correct position. Failure to do so can result

in improper operation of the burners.

Dual

Dual Single Single Oven mode

knob

Single Triple

18

OPERATION

Changing Oven Settings

Clock

The clock must be set to the correct time of day in

order for the automatic oven timing functions to work

properly.

1

Press and hold Cook Time for three seconds.

CLO shows in the display.

2

Press plus(+) or minus(-) to select the desired

time. Plus(+) to increase the time and minus(-)

to decrease the time.

3

Press Start to enter the time and start the clock.

NOTE

•

The time of day cannot be changed during a

timed baking or self-clean cycle.

•

If no other keys are touched within 25 seconds

of touching Clock, the display reverts to the

original setting.

•

If the display time is blinking, you may have

experienced a power failure. Reset the time.

Oven Light

The interior oven light automatically turns on when

the door is opened. Touch Oven Light to manually

turn the oven light on.

NOTE

The oven light cannot be turned on if the Self

Clean function is active.

Minimum & Maximum Default

Settings

All of the features listed have a minimum and a

maximum time or temperature setting that may be

entered into the control. An entry acceptance beep

sounds each time a control key is touched.

An entry error tone (two short tones) sounds if the

entry of the temperature or time is below the minimum

or above the maximum setting for the feature.

Feature

min.

Temp. /

Time

max.

Temp. /

Time

Default

Clock

12 Hr.

1:00

Hr. / min.

12:59

Hr. / min.

24 Hr.

0:00

Hr. / min.

23:59

Hr. / min.

Timer

12 Hr.

0:10

min. / sec.

11:59

Hr. / min.

24 Hr.

0:10

min. / sec.

11:59

Hr. / min.

Cook Time

12 Hr. 1:00 min.

11:59

Hr. / min.

24 Hr. 1:00 min.

11:59

Hr. / min.

Conv. Bake

300 °F /

150 °C

550 °F /

285 °C

350 °F

(*325 °F)/

12 Hr.

Conv.

Roast

300 °F /

150 °C

550 °F /

285 °C

350 °F

(*325 °F)/

12 Hr.

Speed Broil

& Broil

Lo

400 °F

Hi

520 °F

Hi /

3 Hr.

Bake

170 °F /

80 °C

550 °F /

285 °C

350 °F /

12 Hr.

Proof 1:00 min.

11:59

Hr. / min.

Warm 3 Hr.

Self Clean 3 Hr. 5 Hr. 4 Hr.

EasyClean

®

10 min.

* Using Auto Conversion

•

Default cook mode times are without setting cook

time.

19

OPERATION

ENGLISH

Timer On/Off

The Timer On/Off feature serves as an extra timer in

the kitchen that beeps when the set time has run out.

It does not start or stop cooking.

The Timer On/Off feature can be used during any of

the oven control function.

Setting the Timer (for example, to set 5 minutes)

1

Press Timer On/Off. 0:00 with HR inside it

appears and Timer flashes in the display.

2

Press plus(+) or minus(-) to select the desired

time. Plus(+) increases the time and minus(-)

decreases the time.

3

Press Timer On/Off or Start to start the Timer.

The remaining time countdown appears in the

display.

4

When the set time runs out, End shows in the

display. The indicator tones sound every

15 seconds until Timer On/Off is pressed.

NOTE

•

If the remaining time is not in the display, recall

the remaining time by pressing Timer On/Off.

•

Press Timer On/Off twice to set the time in

minutes and seconds.

•

Press Timer On/Off once to set the time in

hours and minutes.

Canceling the Timer

1

Press Timer On/Off once.

The display returns to the time of day.

Wi-Fi

The Wi-Fi button is used to connect the appliance to

a home Wi-Fi network.

1

Press Upper CLEAR/OFF and Lower CLEAR/

OFF.

2

Press and hold Timer On/Off for 3 seconds.

3

The power-on chime sounds, "Set" appears in

the display, and the Wi-Fi icon ( ) blinks.

4

Register the appliance on the Wi-Fi network

using the smart phone app. (See page 33.)

5

To disconnect the appliance from the network,

delete it from the registered appliances in the

app.

Settings

Press and hold Start Time for three seconds.

Then press the Start Time key repeatedly to toggle

through and change oven settings.

The Settings key allows you to:

•

set the hour mode on the clock (12 or 24 hours)

•

enable/disable convection auto conversion

•

adjust the oven temperature

•

activate/deactivate the preheating alarm light

•

set the beeper volume

•

adjust cooktop on alert volume

•

switch the temperature scale between Fahrenheit

and Celsius

Setting the Hour Mode

The control is set to use a 12-hour clock. To reset the

clock to 24-hour mode, follow the steps below.

1

Press and hold Start Time for three seconds.

2

Press plus(+) or minus(-) to set the desired

hour mode on the clock.

3

Press Start to accept the desired change.

Setting Convection Auto Conversion

If you are new to convection cooking, LG makes

converting standard recipes for convection cooking

easy. When Conv. Bake and Conv. Roast are selected,

Convection Auto Conversion automatically converts the

standard recipe temperature entered to a convection

temperature by subtracting 25 °F / 14 °C. This

auto-converted temperature shows on the display. For

example, select Conv. Bake, enter 350 °F, and 325 °F

shows on the display after preheat.

Convection Auto Conversion is enabled by default. To

change the setting, follow these instructions.

1

Press and hold Start Time for three seconds.

Then press Start Time repeatedly until Auto

appears in the display

2

Press plus(+) or minus(-) to enable or disable

the feature.

3

Press Start to accept the change.

20

OPERATION

Adjusting the Oven Temperature

Your new oven may cook differently from the one

it replaced. Use your new oven for a few weeks to

become more familiar with it before changing the

temperature settings. If after familiarizing yourself with

the new oven, you still think that it is too hot or too

cold, you can adjust the oven temperature yourself.

NOTE

To begin, either raise or lower the thermostat

15 °F (8 °C). Try the oven with the new setting. If

the oven still needs adjustment, raise or lower the

thermostat again, using the first adjustment as a

gauge. For example, if the adjustment was too

much, raise or lower the thermostat 10 °F (5 °C).

If the adjustment was not enough, raise or lower

the thermostat 20 °F (12 °C). Proceed in this way

until the oven is adjusted to your satisfaction.

1

Press and hold Start Time for three seconds.

Then press Start Time repeatedly until U_AJ or

L_AJ appears in the display. U_AJ adjusts the

upper oven and L_AJ adjust the lower oven.

2

To increase the temperature, press plus (+) until

the desired amount appears in the display.

To decrease the temperature, press minus (-)

until the desired amount appears in the display.

3

Press Start to accept the change.

NOTE

•

This adjustment does not affect the broiling

or Self Clean temperatures. The adjustment

is retained in memory after a power failure.

The oven temperature can be increased (+) or

decreased (-) as much as 35 °F or 19 °C.

•

Once the temperature is increased or

decreased, the display shows the adjusted

temperature until it readjusts.

Turning the Preheat Alarm Light On/Off

When the oven reaches its set-temperature, the

preheating alarm light flashes 5 times or until the

oven door is opened.

You can activate or deactivate the preheating alarm

light.

1

Press and hold Start Time for three seconds.

Then press Start Time repeatedly until PrE

appears in the display.

2

Press plus(+) or minus(-) to turn the function

on/off.

3

Press Start to accept the change.

Adjusting the Beeper Volume

1

Press and hold Start Time for three seconds.

Then press Start Time repeatedly until BEEP

appears in the display.

2

Press plus(+) or minus(-) to select Hi, Lo, Off.

3

Press Start to accept the change.

Adjusting Cooktop On Alert Volume

1

Press and hold Start Time for 3 seconds. Then

press Start Time repeatedly until CtOP appears

in the display.

2

Press plus (+) or minus (-) to select Hi, Lo,

Off.

3

Press Start to accept the change.

Selecting Fahrenheit or Celsius

Set the oven temperature display to show either

Fahrenheit (°F) or Celsius (°C) units. The oven

defaults to Fahrenheit unless changed by the user.

1

Press and hold Start Time for three seconds.

Then press Start Time repeatedly until Unit

appears in the display.

2

Press plus(+) or minus(-) to select

F(Fahrenheit) or C(Celsius).

3

Press Start to accept the change.

Lockout

The Lockout feature automatically locks the oven

door and prevents most oven from being turned on. It

does not disable the timer and the interior oven light.

1

Touch and hold Lower Clear/Off for three

seconds.

2

The lock melody sounds, Loc appears in the

display and the lock

blinks in the display.

3

Once the oven door is locked, the lock

indicator stops blinking and remains on.

4

To deactivate the Lockout feature, touch and

hold Lower Clear/Off for three seconds. The

unlock melody sounds and the door and the

controls unlock.

NOTE

The Burner On indicator light turns on when the

knob is turned even if the cooktop element does

not operate.

La page charge ...

LG LTE4815ST Le manuel du propriétaire

LG LTE4815ST Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents