Lanier D3210 Read This First Manual

Taper
Read This First Manual
Português (Brasil)
Español
Français
Deutsch
English
Leia isto primeiro
Leer antes de empezar
À lire avant de
commencer
Bitte zuerst lesen
Read This First
Read This First
Read this manual carefully before you use this machine and
keep it handy for future reference. For safe and correct use, be
sure to read the Safety Information in this manual before using
the machine.
For information not in the printed
manual, refer to the HTML/PDF files on
the website.
Connection
Component Names and Functions
Installing the Machine
Information for This Machine
Safety Information for this Machine
Read This First
English
English
TABLE OF CONTENTS
Disclaimer............................................................................................................................................................3
About Operating Instructions.............................................................................................................................4
1. Safety Information for this Machine
Safety Symbols for This Machine...................................................................................................................... 5
Safety Information...............................................................................................................................................6
Safety During Operation............................................................................................................................... 6
Safety Precautions to Be Followed................................................................................................................6
Safety Labels of This Machine.........................................................................................................................12
Positions of WARNING and CAUTION labels.........................................................................................12
Symbols for Earth and Power Switch......................................................................................................... 12
Important Safety Instructions........................................................................................................................... 13
Notes on the LCD Panel of the Machine........................................................................................................14
2. Information for This Machine
Laws and Regulations...................................................................................................................................... 15
EMC Directive.............................................................................................................................................. 15
CE Marking Traceability Information (For EU Countries Only)............................................................... 15
Overseas Affiliates and Noise Emission Information................................................................................ 15
User Information on Electrical and Electronic Equipment.........................................................................16
Note for the Battery and/or Accumulator Symbol (For EU countries only)............................................17
Notes to USA Users of FCC Requirements................................................................................................ 17
Notes to Canadian Users of ICES-003 Conformance.............................................................................18
Notes to Users in the State of California (Notes to Users in USA)...........................................................18
Notes for Contractors (in Norway)............................................................................................................ 18
3. Installing the Machine
Installing the Machine......................................................................................................................................19
Installation Precautions.................................................................................................................................... 20
Wall Mounting Precautions........................................................................................................................ 22
Horizontal Mounting Precautions...............................................................................................................22
Environmental Specifications...........................................................................................................................24
Installation Space Requirements..................................................................................................................... 25
When Mounting the Machine on a Wall.................................................................................................. 25
When Attaching the Rubber Feet to the Machine for Mounting on a Horizontal Surface.................... 26
Mounting the Pen Tray.....................................................................................................................................28
1
4. Component Names and Functions
Input/Output Terminals................................................................................................................................... 29
5. Connection
Connecting the Touch Module........................................................................................................................31
Connecting Power............................................................................................................................................
32
2
Disclaimer
To the maximum extent permitted by applicable laws, in no event will the manufacturer be liable for any
damages whatsoever arising out of failures of this machine, losses of the registered data, or the use or
non-use of this product and operation manuals provided with it.
Make sure that you always copy or have backups of the data registered in this machine. Documents or
data might be erased due to your operational errors or malfunctions of the machine.
3
About Operating Instructions
Operating Instructions explains how to operate and troubleshoot the machine after it is set up. It also
lists the detailed specifications of the machine. You can download Operating Instructions from the
RICOH home page.
https://www.ricoh.com/
4
1. Safety Information for this Machine
This chapter describes the safety precautions.
Safety Symbols for This Machine
The meanings of the safety symbols for this machine are as follows:
Caution
Prohibition
No disassembly
Caution, risk of electric shock
Refer to instruction manual (Please
refer to page 11 "Battery safety
notice" of Read This First)
5
Safety Information
Safety During Operation
In this manual, the following important symbols are used:
Indicates a potentially hazardous situation which, if instructions are not followed, could result in death
or serious injury.
Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor
or moderate injury or damage to property.
Safety Precautions to Be Followed
This section explains safety precautions that should always be followed when using this machine.
When using a stand, be sure to follow the operating instructions provided with the stand.
Be sure to install the machine as close as possible to a wall outlet so that you can disconnect the
power cord plug easily in an emergency.
Avoid taking the following actions close to or inside this machine because doing so can result in
fire or electric shock:
Using flammable sprays, solvents, and so on
Placing flammable sprays, solvents, and so on
Placing containers holding liquids or small metal objects
Install the machine so that the power cord and cables do not get tangled or caught. If the
cables get caught, they may become damaged, resulting in fire or electric shock.
Wire the power cord and connection cables so that they will not be caught by a leg or foot. If
this is not done, a person passing nearby may tumble or the machine may fall or tumble over,
resulting in injury or the machine to be damaged.
1. Safety Information for this Machine
6
The supplied power cord or cords are for use with this machine only. They cannot be used for
appliances other than this machine. Also, do not use power cords other than the power cord or
cords supplied with this machine. Doing so can result in fire or electric shock.
Do not place the machine near water, like a spa or pool, or in a position which will allow the
splashing or spraying of water onto the display, like in front of an open window where rain
water may enter. Fire or electric shock could result from spillage or if such objects or substances
fall inside this machine.
When mounting the main unit on a wall, be sure to contact your local dealer. Incorrect
mounting may cause the main unit to fall or topple over, resulting in injury.
When installing the controller, be sure to contact your local dealer. There are high voltage
components inside the machine, which can cause electric shock.
To reduce the risk of electric shock, do not remove covers. No user serviceable parts inside.
Refer all servicing to qualified service personnel.
The machine is intended for use with the dedicated RICOH Interactive Whiteboard Desktop
Stand Type 1. Use with other stands may cause the machine to become unstable, possibly
resulting in injury.
The following explains the warning messages on the plastic bag used in this product's
packaging:
Do not leave the polythene materials (bags, etc.) supplied with this machine close to babies
and small children. Suffocation can result if polythene materials are brought into contact
with the mouth or nose.
Install or store this machine in a place where children cannot reach it. This machine may fall or
topple over, resulting in injury.
Do not handle the power cord plug with wet hands. Doing so can result in electric shock.
Safety Information
7
To prevent fire or electric shock, disconnect the plug and the power cord from the wall outlet at
least once a year and check them. If any of the following conditions exist, do not use the plug
and the power cord continuously, and consult your dealer or service representative.
There are burn marks on the plug
The prongs on the plug are deformed
The power cord's inner wires are exposed or broken
The power cord's coating is cracked, dented, or damaged
When the power cord is bent, the power turns off and on
Part of the power cord becomes hot
If the machine behaves unusually as follows, turn off the power immediately. After turning off the
power, make sure to disconnect the power cord plug from the wall outlet, and then contact your
service representative and report the problem. Continuously using the power cord can result in
fire or electric shock.
The machine is emitting smoke
The machine is emitting odors
Metal objects or other foreign objects have fallen inside the machine
Water or other fluids have fallen inside the machine
Avoid taking the following actions because doing so can result in fire or electric shock:
Using any power supply voltage or frequencies other than those that match the
specifications shown
Using multi-socket adaptors
Touching the prongs of the power cable's plug with anything metallic
Avoid applying the following actions to power cords because doing so can result in fire or
electric shock:
Damaging them
Bundling them
Modifying them
Putting heavy objects on them
Pulling them forcibly
Bending them forcibly
1. Safety Information for this Machine
8
Do not place the machine in a humid or dusty environment. Doing so can result in fire or electric
shock.
Do not use the product on an unstable location with a sloping or uneven surface on which the
product cannot be maintained in a horizontal position. Otherwise, the product may tip over,
resulting in malfunction or injury.
Do not place heavy objects on the machine. Doing so can cause the machine to fall or topple
over, possibly resulting in injury.
Do not install the machine in a confined space without proper ventilation and air circulation,
such as in a closed cabinet. Allow proper space around the machine for dissipating heat
inside. Do not block any openings and vents on the machine. Overheating may result in
hazards and electric shock.
To prevent personal injuries, mounting the main unit or installing the stand is required before
use.
Avoid placing the display in direct sun or in a location where direct sun or spot lighting will
shine onto the LCD panel, as the heat may damage the panel and the external casing of the
display and the bright light will make it difficult to view the screen.
Do not obstruct the machine's air inlet or outlet. Doing so risks fire caused by overheated
internal components or resulting in damage to the product.
Do not allow foreign objects to enter the machine from the air inlet or outlet.
Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around
the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
Be sure to push the power cord plug fully into the wall outlet. Also, do not push it into loose and
unstable wall outlets likely to cause a contact failure. Doing so can result in heat generation.
If you do not use the machine for a long period of time such as consecutive holidays, be sure to
disconnect the power cord plug from the wall outlet for reasons of safety.
When disconnecting the power cord from the wall outlet, make sure to pull the plug, not the
cord. Do not pull the power cord forcibly. Doing so can damage the power cord, possibly
resulting in fire or electric shock.
Safety Information
9
When performing maintenance on the machine, disconnect the power cord from the wall outlet
for safety.
When moving the machine, be sure to turn off the power and unplug the power cord from the
wall outlet, and then confirm that line cords and other connecting cables have been removed.
Otherwise, the power cord is damaged, possibly resulting in fire or electric shock.
Avoid the following actions after assembling the stand or mounting the machine on the stand:
These actions may deform or damage the stand, causing it to fall down or causing the machine
to fall off the stand, resulting in injury.
Placing your weight on the stand
Hanging on the stand
Leaning against the stand
Dragging the stand forcibly
After mounting this machine on the desktop stand, place the stand at a considerable distance
from the edge of the desk or table. Although the desktop stand has a slip resistant base, such
effect might not be sufficient depending on the location. If you continue to use the stand in such
a situation, the machine may fall off the stand or become damaged, resulting in injury.
To move this product after mounting the machine on the stand, two or more people are
necessary. Otherwise, the product may tip over or the machine may fall off the stand, resulting
in injury while the product is being handled.
Do not hang or drape power cords or cables over the stand or this machine after mounting this
machine on the stand. Otherwise, the product may tip over if it is caught in cables, resulting in
malfunction, fire hazard, electric shock, or injury.
After mounting this machine on the desktop stand, place the product on a desk or table with a
load capacity of at least 50 kg (110.2 lb.). If the load capacity is insufficient, the desk or table
might be damaged, causing the product to tip over or become damaged and resulting in
injury.
Do not place the product outdoors, or in a position which will allow water onto the product.
Failure to follow this instruction may lead to rust on the metal parts or deterioration in the
moving parts.
1. Safety Information for this Machine
10
Safety notice for remote control
Do not expose the remote control to water or moisture. Failure to do so could result in
malfunction.
Battery safety notice
Always ensure that the batteries are inserted with the positive and negative terminals in the
correct direction.
Do not mix old and new batteries. Mixing old and new batteries will shorten battery life or
cause chemical leaks from the batteries. Chemicals which leak from batteries may cause skin
irritation. If any chemical matter seeps out of the batteries, wipe it up immediately using a dry
cloth, and replace the batteries as soon as possible.
Different types of batteries have different characteristics. Do not mix different types. Using the
wrong type of battery could result in malfunction. When replacing batteries, use the specified
product. Dispose of used batteries according to the instructions.
Handling the machine's interior
This section explains safety precautions about handling the machine's interior.
Do not remove any covers or screws other than those explicitly mentioned in this manual. There
are high voltage components inside the machine, which can cause electric shock. Contact your
sales or service representative if any of the machine's internal components require maintenance,
adjustment, or repair.
Do not disassemble or modify this machine. Doing so can result in fire and electric shock.
Contact your sales or service representative for cleaning the machine's interior. If the machine's
interior is not regularly cleaned while dust accumulates, fire and malfunction can result.
Safety Information
11
Safety Labels of This Machine
This section explains the machine's safety information labels.
Positions of WARNING and CAUTION labels
This machine has labels for WARNING and CAUTION. For safety, please follow the instructions
and handle the machine as indicated.
Symbols for Earth and Power Switch
Symbols for earth and power switch that are used for this machine are as follows:
: Earth
: STANDBY
1. Safety Information for this Machine
12
Important Safety Instructions
1.
Read this manual carefully.
2. Keep this manual handy for future reference.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the stand or bracket specified by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-
over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Important Safety Instructions
13
Notes on the LCD Panel of the Machine
The Liquid Crystal Display (LCD) panel of this display has a very thin protective layer of glass which
is liable to marking or scratching, and cracking if struck or pressured. The liquid crystal substrate is
also liable to damage under excessive force or extreme temperatures. Please handle with care.
The response time and brightness of the LCD panel may vary with the ambient temperature.
The LCD panel consists of individual pixels to display images and is manufactured according to the
design specifications. While most of the screen works normally, part of the screen may remain unlit
or constantly lit (in red, blue or green). This is a technical limitation of the LCD technology and is not
a defect.
Do not display the same image for a long time. Otherwise, the afterimage phenomenon may occur.
If the afterimage phenomenon occurs, you can reduce it gradually by displaying moving images
etc.
1. Safety Information for this Machine
14
2. Information for This Machine
This chapter describes laws and regulations related to this machine.
Laws and Regulations
EMC Directive
Using the shield cable
Properly shielded and grounded cables and connectors must be used for connections to a host computer
(and/or peripheral) in order to meet emission limits.
CE Marking Traceability Information (For EU Countries Only)
Manufacturer:
Ricoh Co., Ltd.
3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555, Japan
Importer:
Ricoh Europe SCM B.V.
Blankenweg 24, 4612 RC Bergen op Zoom, The Netherlands
Overseas Affiliates and Noise Emission Information
In accordance with TUV “GS Symbol” requirements, details of the EU office or representative
company are given below.
Overseas Affiliates
Ricoh Europe SCM B.V.
Blankenweg 24, 4612 RC Bergen op Zoom, The Netherlands
Noise Emission
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß EN ISO 7779
15
User Information on Electrical and Electronic Equipment
Users in the countries where this symbol shown in this section has been specified in
national law on collection and treatment of E-waste
Our Products contain high quality components and are designed to facilitate recycling.
Our products or product packaging are marked with the symbol below.
The symbol indicates that the product must not be treated as municipal waste. It must be disposed of
separately via the appropriate return and collection systems available. By following these instructions
you ensure that this product is treated correctly and help to reduce potential impacts on the environment
and human health, which could otherwise result from inappropriate handling. Recycling of products
helps to conserve natural resources and protect the environment.
For more detailed information on collection and recycling systems for this product, please contact the
shop where you purchased it, your local dealer or sales/service representatives.
All Other Users
If you wish to discard this product, please contact your local authorities, the shop where you bought this
product, your local dealer or sales/service representatives.
For Turkey only
2. Information for This Machine
16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194

Lanier D3210 Read This First Manual

Taper
Read This First Manual

dans d''autres langues