Safety 1st MO1750600 Mode d'emploi

You can also:

Send Us a Text: 1-812-203-4747

(US and Canada Only

Carrier Fees May Apply)

Find Us Online: www.safety1st.com

Email Us: [email protected]

Give Us a Call: 1-800-544-1108

(Toll Free)

WiFi

Baby

Monitor

STRANGULATION HAZARD -

Children have STRANGLED in cords. Keep

this cord out of reach of children (more than

3 feet (0.9 m) away). Do not remove this

tag. Use wall clips provided to secure cord away from

baby’s reach. Only use the AC adapter provided by the

manufacturer. NEVER use an extension cord with the AC

adapter.

(0.9 m)

3’

(0.9 m)

03/18/22 4358-8270 MODEL: MO175

WARNING:

1

In The Box

Please read the following instructions and warnings carefully.

Keep these instructions for future reference.

•  Phillips screwdriver

•  Drill with 3/16” size bit

•  Hammer

•  Pencil

Tools required for mounting monitor (not included):

7x Drywall

Anchors

7x

Screws

5x Wall

Clips

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

1x Reset Tool 1x Power Adapter 1x Wall Mount

1x USB-C Cable

10’ (3m) long

3x User Manual

(English, French,

& Spanish)

1x Monitor

2

Features

USB-C Power Port

Microphone

Back of Monitor

MicroSD Card Slot

(up to 128 GB)

Lens

Speaker

IR LEDs (for night vision)

Reset Button

(hold for 10s to reset)

Status LED

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

3’

3

Getting Started

Download Safety 1st App

Download the Safety 1st Connected App from

the Apple App Store or Google Play Store. Sign up

for an account, following the prompts on screen.

Setup

1. Ensure that your smartphone is connected to your home’s

2.4 GHz WiFi network.

2. In the app, tap , then select WiFi Baby Monitor to begin

pairing your device.

3. Connect one end of the USB cable to the baby monitor and the

other end to the power adapter, then plug into a wall outlet. The

status LED will light solid red, then begin ﬂashing red, and the

device is now in pairing mode.

4. On your mobile device, follow step by step instructions to

complete pairing.

5. Once successfully paired, the status LED will turn solid blue.

6. Explore the features and functionality within the Safety 1st

Connected App, like sharing access to other caregivers or

conﬁguring notiﬁcations.

4

Wi-Fi Connectivity

This device requires a 2.4 GHz wireless connection with network

speeds of 2 Mbps or greater at the location the device will be

installed. Your internet service provider can verify the quality of your

internet connection.

If your network equipment supports both 2.4 GHz and 5.0 GHz bands,

we recommend that the bands are separated so each have their own

Network Name (SSID) and Password (Network Key). Please refer to

your wireless router documentation on how to do this.

5

Enabling Video Recordings

Capturing continuous recordings (non-stop) or event recordings

(motion or noise) requires a storage medium. There are two options at

your disposal, either a subscription to the Safety 1st Connected Cloud

or by inserting a MicroSD card into your device.

Connected Cloud

After successfully pairing the baby monitor you will have the option

to subscribe to Connected Cloud. A 30 day free trial is included with

every subscription. You can manage your subscription from within the

application at any time.

Inserting a MicroSD Card

1 . Ensure the monitor is unplugged

from power.

2 . Insert MicroSD card as shown. If

needed, use the included reset pin

to push the card in all the way until

it clicks.

3 . This device supports MicroSD cards of up to 128 GB. A Class 10

card is recommended to record continuous HD video.

(0.9 m)

3’

(0.9 m)

Cleaning & Disposal

Cleaning

Clean product with a slightly damp cloth or with an anti-static cloth. ALWAYS

unplug from electrical outlet before cleaning.

NEVER USE cleaning agents or abrasive solvents. DO NOT clean any part of

the product with thinners or other solvents and chemicals - this may cause

permanent damage to the product which is not covered by the warranty.

Keep product away from hot, humid areas or strong sunlight, and do not let

it get wet.

Every effort has been made to ensure high standards of reliability of your

product. However, if something does go wrong, please do not try to repair it

yourself - contact Consumer Care for assistance.

Disposal

At the end of the product life cycle, you should not dispose of this product

with normal household waste. Take this product to a collection point for the

recycling of electronic equipment in accordance with your local laws.

Some of the product materials can be re-used if you take them to a recycling

point. By reusing some parts or raw materials from used products you

make an important contribution to the protection of the environment.

Please contact your recycling center in case you need more information on

the collection points in your area. 6

Mounting Monitor

Tools required for mounting monitor (not included):

STRANGULATION HAZARD -

Children have STRANGLED in cords.

Keep this cord out of reach of children

(more than 3 feet (0.9 m) away). Do not

remove this tag. Use wall clips provided

to secure cord away from baby’s reach. Only use

the AC adapter provided by the manufacturer.

NEVER use an extension cord with the AC adapter.

WARNING:

•  Phillips screwdriver

•  Drill with 3/16” size bit

•  Hammer

•  Pencil

7

Wall Mounting

Before Wall Mounting the monitor,

download the app and complete the

pairing process. This will help ensure

optimal placement. The following

instructions are for securely mounting to

a drywall surface.

1 . Examine the room and determine the optimal placement on the

wall. Mark this location with a pencil. IMPORTANT: Ensure that

the baby monitor is at least 3 ft (0.9 m) away from the crib.

2 . Place the included wall mount onto the wall

at the marked location, ensuring the arrow is

pointing upwards. Using a pencil, make a mark

through the two screw holes. Put the wall mount

to the side for later use.

3 . Using a 3/16” drill bit, drill a hole 1.0” (2.54 cm) deep on the

pencil marks. DO NOT drill through the wall mount holes.

4 . Insert drywall anchor into the hole. If necessary, lightly tap

with a hammer until the drywall anchor is ﬂush with the wall

surface. Note: If mounting to a wall stud, drywall anchors are

not required.

5 . Align the holes of the wall mount with the

drywall anchors and using a screwdriver,

hand tighten a screw into each of the drywall

anchors. DO NOT over tighten. continued on next page

3’

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

8

9

6 . Locate the hole underneath the base of the

monitor and place it on the wall mount.

7 . Applying light pressure to the base, slide the

monitor DOWN on the wall mount until it

clicks ﬁrmly into place. DO NOT pull on the

monitor head. Rotate and tilt the monitor to

ensure it is fully attached to the wall mount.

a . To remove the monitor from the wall, push up on the base until

it releases from the mount. NEVER leave the monitor hanging

on the wall mount without clicking in place.

8 . Before proceeding to the next step. Ensure that the

viewing angle is to your liking by verifying the app.

Rotate and tilt the monitor as needed.

9 . WALL CLIPS: Use the included wall clips to secure

the cord at least 3 ft (0.9 m) away from the crib:

a . Repeat steps 3 and 4 to install the wall anchors

into the drywall. Ensure that wall anchors are

placed 2 ft (0.61m) apart.

b . Place cord into the wall clips, leaving a

little slack.

c . Align wall clip hole to wall anchor. Close

the top cover to secure the cord in place.

(0.9 m)

3’

3’ (0.9 m)

Wall

(right side)

Top

(left side)

(0.9 m)

3’

(0.9 m)

3’

(0.9 m)

Flat Surface Mounting

1 . Determine an optimal monitor

placement, keeping the monitor

and power cord at least 3 ft

(0.9 m) away from crib. The

monitor should be placed on a

ﬂat surface, such as a chest of

drawers, a desk, or a shelf.

2 . Before proceeding to the next step. Ensure that the viewing angle

is to your liking by verifying the app. Rotate and tilt the monitor

as needed.

3 . Follow Step 9 a-d of Wall Mounting: WALL CLIPS. Use the

included wall clips to secure the cord at least 3 ft (0.9 m) away

from the crib. This will help reduce the chance of the monitor

slipping, sliding, rotating or falling over. 10

(0.9 m)

3’

(0.9 m)

d . Ensure holes of the provided wall clips are aligned with the

wall anchors and insert provided screw. Using a screwdriver,

hand tighten a screw into each wall

clip.

e . The cord can also be tucked under

the slots on the left or right side of

the monitor’s base for additional cord

management.

0.9 m

(3 pies)

11

Product FAQs

Why is the QR code not being scanned by my baby monitor?

•

The status LED must be ﬂashing red to be in pairing mode. Ensure that

there are no bright lights near the monitor’s lens or your mobile phone’s

display and that your mobile device’s brightness is set to high.

Position the QR shown on your mobile device’s display towards the baby

monitor’s lens and move device back and forward until recognized by the

baby monitor. You should hear a chime and the LED status light will begin

to ﬂash blue.

Can I pair my monitor with more than one account?

•

Sharing access to your baby monitor with other caregivers is easy. Access

the monitor settings screen, select “sharing & users” then tap “add a new

user” and complete the information.

•

To pair the device with a new account, you must factory reset the device by

holding the reset button on the back of the monitor for 10 seconds.

Why is Night vision blurry or too bright?

•

Avoid positioning the baby monitor within 3’ (1m) of a wall, large

obstructions or bright windows. These surfaces may encourage light from

the IR LEDs to reﬂect into the lens.

12

How can I enable Background Audio?

•

Access the monitor settings screen, select “audio & indicators” then

toggle “Background Audio”

Why am I not receiving notiﬁcations when baby is moving /

making noise?

•

There are multiple places where notiﬁcations can be impacted within

the app and your smartphone. Checkout our troubleshooting guides at

www.safety1st.com

What does each Status LED Color mean?

•

LED Flashing Red – Pairing Mode

•

LED Solid Red – Device power up

•

LED Flashing Blue – Connecting to Network

•

LED Solid Blue – Successfully Connected to Network

•

LED Purple – Firmware update in progress.

How do I disable the Status LED?

•

Access the monitor settings screen, select “audio & indicators” then

toggle “LED Status Light”

13

For indoor use only. To reduce the risk of ﬁre or

electrical shock, DO NOT expose this product to

water or moisture. DO NOT use monitor near water

(such as bath tub, sink, etc.) or submerge in water.

This monitor is not intended to be used as a medical

monitor and its use should not replace proper adult/

parental supervision. You should check your child’s

activity at regular intervals as this monitor will not

alert parents to the silent activities of a child.

NEVER attempt to disassemble the product. This is

dangerous and will void the warranty.

Test monitor periodically when in use and changing

locations.

WARNING:

14

Use only the adapter supplied with this product.

Incorrect adapter polarity or voltage can seriously

damage the product.

To prevent entanglement and overheating, DO NOT

use extension cords.

The adapter may become slightly warm to the touch

during operation. This is normal.

ALWAYS unplug the AC adapter from the wall during

extended periods of non-use.

Check to make sure wall outlet plates are not

unusually hot to the touch. If they are, immediately

unplug cords from these outlets. Check that all outlet

connections are in good condition so that adapter

is not loose or that no wiring is exposed. Have a

qualiﬁed, licensed electrician check the wiring as

soon as possible.

continued on next page

15

This baby monitor allows internet users to hear or

view activity. Use the security feature included with

this device to restrict internet viewership.

DO NOT place adapter/wall plug under a window

where a child might use it to step on and/or to reach

something that might be dangerous.

Adult assembly is required. Keep small parts away

from children when assembling. Exercise care when

unpacking the product.

This product is not a toy. DO NOT allow children to

play with it.

THE USER SHOULD NOT ATTEMPT TO SERVICE OR

REPAIR THE MONITOR. ALL SERVICING SHOULD BE

REFERRED TO CONSUMER CARE.

It is essential to check reception regularly.

Monitor uses encrypted transmission over FCC managed frequencies.

Always remember to secure your Wi-Fi router with a password.

16

IMPORTANT SAFETY INSTRUCTIONS

• VENTILATION: DO NOT block ventilation openings. DO NOT place on a bed,

sofa, rug or similar surface. DO NOT place in a book case or cabinet that may

restrict air ﬂow.

• HEAT: The monitor should be situated away from heat sources such as

radiators, heat registers, stoves, or other appliances that produce heat. Also

keep these components out of direct sunlight.

• POWER CORD PROTECTION: The power supply cord should be routed so

that it is not likely to be walked on or pinched by items placed upon or against

it. Pay particular attention to the cord at the plug, convenience receptacle, and

at the point it exits from the monitor.

FCC/IC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However there is no

guarantee that interference will not occur in a particular installation.

continued on next page

17

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning this equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modiﬁcations not expressively approved by Dorel

Juvenile Group can void your authority to operate this equipment under Federal

Communications Commission’s rules.

Use of other accessories may not ensure compliance with the FCC exposure

guidelines.

CAUTION: This equipment complies with FCC/IC RSS-102 radiation exposure

limits set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20 cm between the radiator and

your body.

IC Information

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate

18

using an antenna of a type and maximum (or lesser) gain approved for the

transmitter by Industry Canada. To reduce potential radio interference to other

users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that necessary for successful

communication. This Class B digital apparatus complies with Canadian ICES-003.

Warranty

Dorel Juvenile Group warrants this product against defective materials or

workmanship for one year from the date of original purchase. For more

information or to make a claim, visit www.safety1st.com/warranty.

are trademarks of Dorel Juvenile Group, Inc. (800) 544-1108 www.safety1st.

com. Styles and colors may vary. Les styles et les couleurs peuvent varier. Los

estilos y los colores pueden variar. Made in CHINA. Fabriqué en CHINE. Hecho

en CHINA. Distributed by (distribué par/distribuido por) Dorel Juvenile Group,

Inc., 2525 State St., Columbus, IN 47201-7494. Dorel Juvenile Canada, 2233

Argentia Road, Suite 110, Mississauga, ON L5N 2X7. Importado y Distribuido

en Chile por: Comercial e Industrial Silfa S.A. - San Ignacio 0201 / Parque

Industrial Portezuelo Quilicura, Santiago Chile. Fono (562) 2339 9000. En

Perú por: Comexa S.A.- Los Libertadores 455 – San Isidro, Lima – Perú.

Fono (511) 4469014. En Centro América, Caribe y Ecuador por: Best Brands

Group S.A. – Av. Balboa, Bay Mall Plaza, Planta Baja, local 9, Panamá.- Fono:

(507) 300 2884. En Colombia por: Baby Universe S.A.S. - Vía 40 No. 77-29,

Barranquilla, Colombia-Fono: (575) 353 1110 Importador: DJGM, S.A. DE

C.V. Gabriel Mancera No. 1041 Col. Del Valle, Benito Juárez C.P. 03100 México,

Ciudad de México R.F.C. DJG140305GN9 Tel. (55) 67199202

03/18/22 4358-8270 MODEL: MO175

La page charge ...

Safety 1st MO1750600 Mode d'emploi

Safety 1st MO1750600 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents