Address：No.16-3, Shunping 1st St., Xitun Dist., Taichung City 40754, Taiwan (R.O.C)
Tel：886-4-2295-0350 Fax：886-4-2295-0357
MANUAL
使用手冊
CUSTOMER
Item P/N
F215U
DESCRIPTION
Function board
Document
Number
F215U
DATE
This document contains confidential and proprietary information of CORESTAR CO., Ltd and shall not be duplicated or
otherwise transferred to a third party without the express written consent of CORESTAR.
本文件所包含內容所屬於合興數位股份有限公司(CoreStar Co., Ltd)之規格文件及專有技術資料所有，不得未經由合興數
位公司同意而擅自轉載或以不明確的書面或其他方式轉讓給第三方。
page 2 / 7
1. Hardware overview
1.1 Main Board PCB Physical Specifications
1.2 Connector Definitions
U1304
IPEX Wi-Fi / BT Antenna connector
J3001/J1 CTRL CON
J2301/J17
System Key and Headphone connector
CON2501
12V DC Power input
AJ1/BJ1
Speaker connector
J15
External Line-in socket connector
J2
FAN control connector
J6
External USB socket connector
J10
Keyboard connector
J11
Hand Rail key connector
Pin No.
Description
Pin No.
Description
Pin No.
Description
Pin No.
Description
1~4
+12V
5~7、
10、13
GND
8
+5V
9
+3.3V
Pin No.
Description
Pin No.
Description
Pin No.
Description
Pin No.
Description
11
UART Rx
12
UART Tx
14
RS232 Tx
15
RS232 Rx
page 3 / 7
J5
5Khz Heart rate receiver module connector
J14
Wired heart rate sensor connector
J7
USB bridge connector
2. Operational description
2.1 System block diagram
2.2 Processor: MediaTek MT8168, Quad-core ARM® 2.0GHz Cortex-A53 MPCore
Memory: 2GB LPDDR4
Connectivity: 2.4 GHz and 5.0 GHz IEEE 802.11a/b/g/n/ac wireless LAN
Supports Bluetooth 5 dual mode
2 × USB 2.0 ports
GPIO: UART * 2
RS232 * 1
Video & sound: HDMI ports * 1(up to FHD supported)
4-lane MIPI DSI display port
stereo audio port
Multimedia: Mali-G52 3EE MC1
H.264 decoder: Main/high profile 1080p @60fps/40Mbps
H.264 encoder: High profile 1080p @ 60fps
page 4 / 7
OpenGL ES 3.2/2.0/1.1
OpenCL 2.0 full profile
Input power: The 12V DC power will powered the console and whole system included the RF system.
lifetime: The Model will remain in production until at least January 2026.
2.3 Operating frequency : 2142-2472MHz / 5150~5250Mhz，support IEEE 802.11b/g/n/a/ac (Frequency Bandwidth : 20MHz /
40MHz/80MHz).
2.4 PCB antenna 0.69dbi (2.4GHz) , 1.24dBi(5GHz)
2.5 Modulation
2.5.1 BT/BLE：GFSK / DSSS
2.5.2 Wi-Fi：DBPSK/DQPSK/CCK(DSSS)
2.6 System BT can search the A2DP devices manually and connecting to one of them.
2.7 User can search Wi-Fi AP manually via system setting menu and connecting to one of them.
FCC WARING STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired
operation of the device.
page 5 / 7
◼ FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your body.
◼ FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.
The end product shall has the words “Contains Transmitter Module FCC ID:2ANCG-FU215.
◼ OEM statement
The Original Equipment Manufacturer (OEM) must ensure that the OEM modular transmitter must be
labeled with its own FCC ID number. This includes a clearly visible label on the outside of the final product
enclosure that displays the contents shown below. If
the FCC ID is not visible when the equipment is installed inside another device, then the outside of the
device into which the equipment is installed must also display a label referring to the enclosed equipment.
The end product with this module may subject to perform FCC part 15B unintentional emission test
requirement and be properly authorized while installation to host(s), and platform, and integrator are
obligated to have its manual or instruction with the related compliance warning to end users.
This device is intended for OEM integrator only
The end product with this module may be subject to re-evaluate RF exposure as per 47CFR §
2.1091, and §2.1093 if antenna or usage, including co-located usage of other transmitters, of the
subsequent installation are changed.
This radio transmitter has been approved by FCC/Innovation, Science and Economic Development Canada
to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna
types not included in this list that Have a gain greater than the maximum gain indicated for any type listed
are strictly prohibited for use with this device.
Antennas gain: 0.69dBi (2.4G) ,1.24dBi(5G)
page 6 / 7
IC WARING STATEMENT
◼ Canada, Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003
Cet appareil numérique de classe B est conforme à la norme NMB-003.
◼
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to
the following two conditions: (1) this device may not cause interference, and (2) this device
must accept
any interference, including interference that may cause undesired operation of the
Le present appareil
est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de
licence.L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage adioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
◼ Conformité des appareils de radiocommunication aux limites
d'exposition humaine aux radiofréquences (CNR-102)
L'ordinateur utilise des antennes intégrales à faible gain qui n'émettent pas un champ
électromagnétique supérieur aux normes imposées par Santé Canada pour la population. Consultez le
Code de sécurité 6 sur le site Internet de Santé
Canada à l'adresse suivante : http://www.hc-sc.gc.ca/
L'énergie émise par les antennes reliées aux cartes sans fil respecte la limite
d'exposition aux radiofréquences telle que définie par Industrie Canada dans la
clause 4.1 du document CNR-102, version 4.
◼ Caution: Exposure to Radio Frequency Radiation.
To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20
cm must be maintained between the antenna of this device and all persons.
Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation
d’au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes.
◼ ISED RF Radiation Exposure Statement:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems;
(ii)
(iii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to
remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be
clearly indicated.
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur
les restrictions susmentionnées, notamment :
(i) (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de
page 7 / 7
satellites mobiles utilisant les mêmes canaux;
(ii) (iv) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de
l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la
p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être clairement
indiqués
Note: The end product shall has the words “Contains Transmitter Module IC : 22282-F215U.
Le produit final doit être étiqueté dans une zone visible avec ce qui suit “Contient IC : 22282-F215U
◼ OEM statement
Cet émetteur radio a été approuvé par FCC/Innovation, Science et Développement économique
Canada pour fonctionner avec les types d'antennes répertoriés ci-dessous, avec le gain maximal autorisé
indiqué. Les types d'antenne non inclus dans cette liste qui ont un gain supérieur au gain maximum
indiqué pour tout type répertorié sont strictement interdits pour une utilisation avec cet appareil.
Antennes Gain : 0.69dBi (2.4G) ,1.24dBi(5G)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
dans d''autres langues
- English: CoreStar F215U User manual
Documents connexes
Autres documents
-
Advantech EWM-W192 Series Manuel utilisateur
-
LITE ON QCS403YA Manuel utilisateur
-
LG LAMWBD1 Manuel utilisateur
-
Dyson DBWIFIBLE05 Wireless Local Area Network Module Manuel utilisateur
-
Mediatek MT7922A22M Mode d'emploi
-
Askey 8822CS Manuel utilisateur
-
-
-
