Amazon B07NXJT6NN Welcome Manual

Marque: Amazon

Modèle: B07NXJT6NN

Catégorie: Destructeurs de papier

Taper: Welcome Manual

created by: Impala Services Ltd.Page size: 139.7 x 107.95 mm

B07NXJT6NN

150-Sheet Autofeed Micro-Cut Paper Shredder

Trituradora de Papel Microcorte de Alimentación

Automática de 150 Hojas

Déchiqueteuse Micro-Coupe à Alimentation

Automatique, 150 Feuilles

English ..................................... 3

Español .................................. 20

Français ................................. 38

Welcome Guide

•

English

Contents:

Before getting started, ensure the package contains the following components:

Top lid button

Paper tray viewing window

Pull-out wastebasket

Manual feed slot

Casters

Main power ON/OFF switch

(on the back side)

Control panel

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed

to a third party, then these instructions must be included.

When using electrical appliances, basic safety precautions should always be followed to reduce the

risk of ﬁre, electric shock, and/or injury to persons including the following:

Do not open lid once shred cycle has started.

• Always turn the shredder off and unplug the power cord from the power outlet when not in use,

before cleaning, moving, or emptying the wastebasket.

Risk of ﬁre! Never use any petroleum-based or ﬂammable oils or lubricants in

or around the machine as some oils can combust, causing serious injury.

• Never dispose of ﬂammable chemicals or materials that have come into contact with ﬂammable

chemicals (for example, nail polish, acetone and gasoline) in the shredder basket.

• Never shred large paper clips, window or insulated envelopes, continuous forms, newspaper,

bound pages (for example: notepads, checkbooks, magazines, etc...), transparencies,

laminated documents, cardboard, any items with adhesives, hard materials or plastic (except

credit cards).

• A power outlet should be near the equipment and be easily accessible.

• Never let the wastebasket become full. This will lead to shredded material being pulled back up

into the shredder and cause jams.

• Never place the shredder near water or any heat source.

• Do not use the shredder if the power cord is damaged in any way.

• Do not attempt to service this product yourself as doing so may expose you to sharp cutting

blades and/or electricity and will void the manufacturer’s warranty.

• Never try to clean or clear the shredder blade.

• Never shred beyond the speciﬁed sheet capacity. This may result in extensive damage to the

machine.

Changes or modiﬁcations to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

NOTICE

CAUTION

WARNING

Read the instructions before use.

Do not spray or keep any aerosol

products in or around the shredder.

Avoid touching the feed slot with

hands.

Keep loose clothing or jewelry away

from the feed slot.

Product is not intended for use by

children (product is not a toy).

Avoid getting hair near the feed slot.

Do not insert foreign objects into

the feed slot.

Do not shred:

Adhesive labels Avoid placing staple side here

Stapled papers Unopened mail / envelopes

>1/4” (6mm) heavy duty paper Stapled papers

Folded sheets Bound documents

Binder clips Jumbo clips

CDs / DVDs Laminated sheets / magazines

No staples in center Avoid placing staple side here

Before First Use

• Check for transport damage.

• Before connecting the product to the power supply, check that the power supply voltage and

current rating corresponds with the power supply details shown on the product rating label.

Risk of suffocation! Keep any packaging materials away from children – these

materials are a potential source of danger, e.g. suffocation.

Installation

1. Make sure the basket door is shut and securely closed. The safety power cut-off will not

operate if the door is open. Shredders with pull-out wastebaskets will also cut power upon bin

removal. The supplied wastebasket activates a safety switch, which allows the shredder to be

operable.

2. The power outlet should be near the equipment and easily accessible.

3. Connect the power cord to any standard 120 V AC outlet.

Micro-cut shredders have very sharp exposed blades on the underside.

DANGER

CAUTION

Operation

Main power switch

• The main power switch

must be “ON” to operate. In an emergency, stop the shredder

immediately and turn switch to “OFF” mode. This completely disconnects all power to the

machine.

Control panel

Auto-On (blue): This setting automatically starts the shredder upon loading paper into

the paper tray or inserting paper into the manual feed slot. When the paper has passed

through, the shredder automatically stops.

Off: This setting turns off all features of the shredder. For safety reasons, we recommend

that you leave the shredder in the “OFF” position when it is unattended or not in use.

Reverse: In the unlikely event of a paper jam, use the reverse setting to help clear

the cutters of paper that did not pass through. Never attempt to clear a jam using the

reverse function until you have emptied the wastebasket.

Forward: The forward setting can also be used to help clear the cutters in the event of

a paper jam. This allows you to manually activate the shredder to cutting mode.

LED status indicators

Overheat: The Red LED light indicates the shredder has shredded continuously

beyond the maximum running time, has overheated, and will automatically shut off. If

this happens, switch the shredder to “OFF” for 45minutes or longer before resuming

normal operation.

Overload: The Red LED light indicates when too much paper is inserted. Use

“Reverse” mode to back up and reduce number of sheets.

Door open: The Red LED light indicates the shredder basket or top lid is not closed

properly. Shredders with pull-out wastebaskets feature a safety power cut-off upon bin

removal. Make sure the pull-out wastebasket is properly back in place and the blue

“Power On” indicator is lit.

Bin full: When the wastebasket is full, the Red LED light will indicate it needs to be

emptied. While lit, the shredder will not operate until the wastebasket is cleared.

Feed Error: The Red LED light indicates the paper in the paper tray cannot be grabbed

by the feeders, open the lid to make sure the papers are unfolded and positioned

properly.

Features:

• Auto-Reverse Technology: When the shredder detects over-capacity shredding, the motor will

immediately stop and reject paper before actual shredding begins.

• Energy-Saving Auto Power Sleep: This setting turns off all features of the shredder. For

safety reasons, we recommend that you leave shredder in the “OFF” position whenever it is

unattended or not in use.

Auto Feed Shredding Operation

Auto Feed Shredding Capacity:

Shreds:

• Maximum 150sheets of letter size (8-1/2” x 11”) 20lb bond paper per load.

• Up to 20sheets of stapled paper stacks.

• Up to 20sheets of clipped paper stacks.

Power on shredder:

Plug into grounded standard

US household power outlet

(120 V~).

Put main power switch in

ON (I) position.

Turn power on.

Open lid and load paper

*Paper should be ﬂat and aligned with paper tray.

NOTICE

Close lid:

• The shredder automatically starts when you close the lid.

Risk of pinching hand! Keep ﬁngers/clothes/any other accessories away

while closing the lid.

Manual Feed Shredding Operation

Power on shredder

Plug into grounded

standard US household

power outlet (120 V~).

Put main power switch in

ON (I) position.

Turn power on.

Make sure you do not exceed the max.

sheet count per pass (10sheets). Insert

paper as straight as possible into feed

slot and release.

Insert one credit card at a time into the

middle of the feed slot.

CAUTION

Always turn off and unplug the shredder when not in use.

This shredder will shred staples and small paper clips. However, we

recommend removing paper clips whenever possible to extend the lifespan of

your shredder.

Only shred credit cards by feeding them vertically into the middle of the feed

slot, releasing when shredding begins. Never feed in more than one credit card

at a time.

Overfeeding the shredder: Shredding beyond the speciﬁed sheet capacity can

result in extensive damage to the shredder. Overfeeding will strain the machine

and quickly wear and break the cutting blades and internal components.

Overheating with extended use: In the event that the machine shreds

continuously beyond the maximum running time and overheats, the unit will

automatically shut off. If this happens, switch the shredder off for 45minutes or

longer before resuming normal operation.

Maintenance

Failure to properly maintain your shredder will void the warranty.

• To maintain with shredder oil (shredder oil not included): Oil the shredder blades every

month with basic vegetable, cooking oil or shredder oil. Follow oiling procedure below. This

helps to keep the shredder blades operating well over many years of use.

Oiling procedure

1. Open lid.

2. Carefully apply shredder oil across feed slot.

3. Close lid and turn on shredder in reverse mode for 3-5seconds.

NOTICE

WARNING

To maintain with a shredder sheet (shredder sheet not included)

• Simply insert shredder sheet into the manual feed slot the same way you would a piece of paper.

• Turn on shredder in reverse mode for 3-5seconds.

Shredder oil and lubricant sheet are not included.

Do not use aerosol products.

Shredder oil

Do not use canned air on shredder.

Do not spray or keep any aerosol products in or around shredder.

Cleaning

• Never use anything ﬂammable to clean the shredder. This may result in serious injury or damage

to the product.

• Always unplug the shredder before cleaning!

• Only clean the shredder by carefully wiping the unit with a dry soft cloth or towel.

• Do not clean or immerse the shredder in water. Having the unit wet may result in damage

or malfunction to the electrical components. If the shredder happens to get wet, be sure to

completely dry the unit immediately with a cloth or towel.

NOTICE

CAUTION

Troubleshooting

If there is a problem with your shredder, check below for the symptoms and steps to resolve. If you

continue to have problems, contact customer support at our Service Center.

Do not attempt to repair by opening the shredder head. This will completely void the product warranty.

No power to the shredder

Check main power switch located at

back of machine

Check power outlet

1. Make sure the power cord is plugged into a functioning 120 V~ standard household power

outlet.

2. Check if the blue “Power On” icon is lit.

3. Check that the lid and wastebasket are properly closed.

Shredder does not feed or shred paper

Overheat Cool down

1. If the “Overheat” light is lit in red, turn shredder off and let it cool down for 45minutes.

2. Turn shredder on, check the “Overheat” light again, and restart shredding only when light is not

lit.

Auto Feed mode:

If the “Feed Error” icon is lit

• The Red LED light indicates the paper in the paper tray cannot be grabbed into the shredding

slot. Open lid to make sure the papers are unfolded and positioned properly.

Shredder is jammed

• Open lid, remove the remaining stack of paper and carefully pull the jammed paper out of the

cutters.

• Remove folded papers, staples and clips.

• Remove any materials with adhesive labels.

• Make sure papers are positioned properly. Staples must be placed in either top left or top right

of paper tray.

Manual Feed Model:

Shredder is jammed and runs in “Reverse” mode only / “Overload” icon is lit in red

Reverse for 5seconds

Power off then pull paper side to side Reduce sheets

1. Press the reverse button ( ) for 5sec.

2. Turn off shredder then pull paper side to side to remove jammed paper (as much as possible).

3. Reduce the number of sheets being fed (count pages to be sure not to exceed the maximum

sheet count).

With stubborn situations where the reverse function does not help, follow the steps below:

Apply shredder oil and wait 30minutes

Turn off shredder

Press “Forward”

Use thick paper to push jam through

Turn on shredder

1. Turn off shredder.

2. Apply shredder oil to the feed slot (shredder oil not included). Let oil soak into paper and

machine for 30minutes.

3. Set the “Power” button to “Auto/On”.

4. Press the forward button ( ) or use thick paper stock/ greeting card to manually activate the

shredder to cutting mode to push the jam through.

5. Reduce the number of sheets being fed (count pages to be sure not to exceed the maximum

sheet count). Refeed the paper.

Shredder does not feed or shred credit card or small piece of paper

Feed in the center

1. Position credit card or small piece of paper over the credit card section of the feeder (center

position).

2. Try again.

FCC – Supplier’s Declaration of

Conformity

Unique Identiﬁer B07NXJT6NN 150-Sheet Autofeed Micro-Cut Paper Shredder

Responsible Party Amazon.com Services, Inc

U.S. Contact Information 410 Terry Ave N.

Seattle, WA

98109, United States

Telephone Number (206) 266-1000

FCC Compliance Statement

1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

2. Changes or modiﬁcations not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canada IC Notice

This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B) standard.

Speciﬁcations

Auto Feed Tray: Manual Feed Slot:

Sheet capacity:

150sheets of 20lb letter-size

bond paper

10sheets of 20lb bond paper*

Paper shred size:

5/32 x 15/32in. pieces

(4.0 x 12mm pieces)

5/32 x 15/32in. pieces

(4.0 x 12mm pieces)

Paper tray size: Letter size 8.5” x 11” N/A

Paper entry width: 8.7in. (220mm) 8.7in. (220mm)

Credit card capacity: N/A Only one per pass

Duty cycle: 60min on / 45min off 10min on / 45min off

Voltage: 120V~, 60Hz / 3.5A 120V~, 60Hz / 3.5A

CAN ICES-3 (B)/NMB-3(B)

* Manual Feed:

• Shreds credit cards, small paper clips, staples

• One folded sheet of paper equals 2sheets of paper

• Heavier paper, humidity or electrical voltage other than the rated voltage may reduce shredding

capacity

Warranty Information

To obtain a copy of the warranty for this product:

Visit amazon.com/AmazonBasics/Warranty

— or —

Contact Customer Service at 1-866-216-1072

Feedback

Love it? Hate it?

Let us know with a customer review.

AmazonBasics is committed to delivering customer-driven products that live up to your high

standards. We encourage you to write a review sharing your experiences with the product.

Please visit: amazon.com/review/review-your-purchases#

For further services:

Visit amazon.com/gp/help/customer/contact-us

— or —

Contact Customer Service at 1-866-216-1072

Guía de Bienvenida

•

Español

Contenido:

Antes de comenzar, asegúrese de que la caja contenga los siguientes componentes:

Botón de la tapa superior

Ventanilla de observación de la bandeja para papeles

Canasta extraíble

Ranura de alimentación manual

Ruedas

Interruptor principal de encendido/apagado

(en la parte trasera)

Panel de control

La page charge ...

Amazon B07NXJT6NN Welcome Manual

Marque: Amazon

Modèle: B07NXJT6NN

Catégorie: Destructeurs de papier

Taper: Welcome Manual

Télécharger le PDF

rapport

dans d''autres langues

English: Amazon B07NXJT6NN
español: Amazon B07NXJT6NN

Amazon B07NXJT6NN Welcome Manual

Amazon B07NXJT6NN Welcome Manual

dans d''autres langues

Documents connexes

Autres documents