Maytag MTW6700TQ - 28" Washer Mode d'emploi

Marque: Maytag

Modèle: MTW6700TQ - 28" Washer

Catégorie: Machines à laver

Taper: Mode d'emploi

BRAVOS™AUTOMATIC WASHER

USE & CARE GUIDE

LAVEUSE AUTOMATIQUE BRAVOS™

GUIDE D’UTILISATION ET D’ENTRETIEN

FOR QUESTIONS ABOUT FEATURES, OPERATION/PERFORMANCE,

PARTS, ACCESSORIES OR SERVICE CALL: 1.800.688.9900

IN CANADA, CALL: 1.800.807.6777

AU CANADA, POUR ASSISTANCE, INSTALLATION OU SERVICE,

COMPOSER LE : 1.800.807.6777

VISIT OUR WEBSITE AT WWW.MAYTAG.COM

IN CANADA, WWW.MAYTAG.CA

OU VISITER NOTRE SITE INTERNET À

WWW.MAYTAG.CA

PARA OBTENER ACCESO AL MANUAL DE USO Y CUIDADO EN ESPAÑOL, O PARA OBTENER INFORMACIÓN ADICIONAL ACERCA DE SU PRODUCTO, VISITE: WWW.MAYTAG.COM.

TENGA LISTO SU NÚMERO DE MODELO COMPLETO. PODRÁ ENCONTRAR EL NÚMERO DE MODELO Y DE SERIE EN LA ETIQUETA UBICADA DEBAJO DE LA TAPA DE LA LAVADORA.

W10092756B

TABLE OF CONTENTS

WASHER SAFETY .................................................................................................................... 3

INSTALLATION REQUIREMENTS........................................................................................... 4

Tools and Parts..................................................................................................................... 4

Location Requirements......................................................................................................... 5

Drain System........................................................................................................................ 6

Electrical Requirements........................................................................................................ 6

INSTALLATION INSTRUCTIONS ........................................................................................... 7

Before You Start ................................................................................................................... 7

Remove Shipping Base and Packing Ring ............................................................................ 7

Connect Drain Hose ............................................................................................................ 8

Connect the Inlet Hoses ....................................................................................................... 8

Secure the Drain Hose ....................................................................................................... 10

Level the Washer................................................................................................................10

Complete Installation ......................................................................................................... 11

BENEFITS AND FEATURES.................................................................................................... 11

Benefits .............................................................................................................................. 11

Features.............................................................................................................................. 12

WASHER USE........................................................................................................................ 13

Starting Your Washer ......................................................................................................... 13

Using the Proper Detergent................................................................................................ 13

Pausing or Restarting the Washer....................................................................................... 14

Stopping the Washer.......................................................................................................... 15

Changing Cycles, Modifiers and Options........................................................................... 15

Status Lights........................................................................................................................ 15

Cycles ................................................................................................................................ 15

Modifiers............................................................................................................................ 17

Options .............................................................................................................................. 18

Operating Controls............................................................................................................. 18

Normal Sounds .................................................................................................................. 19

LAUNDRY TIPS..................................................................................................................... 19

WASHER CARE...................................................................................................................... 20

Cleaning Your Washer ....................................................................................................... 20

Water Inlet Hoses...............................................................................................................20

Vacation, Storage and Moving Care................................................................................... 20

TROUBLESHOOTING........................................................................................................... 21

Washer and Components................................................................................................... 21

Washer Operation.............................................................................................................. 23

Clothing Care..................................................................................................................... 24

ASSISTANCE OR SERVICE..................................................................................................... 26

In the U.S.A........................................................................................................................ 26

In Canada........................................................................................................................... 26

Accessories ........................................................................................................................ 26

WARRANTY .......................................................................................................................... 27

TABLE DES MATIÈRES

SÉCURITÉ DE LA LAVEUSE ................................................................................................... 28

EXIGENCES D'INSTALLATION............................................................................................. 29

Outillage et pièces .............................................................................................................29

Exigences d'emplacement.................................................................................................. 30

Système de vidange............................................................................................................ 31

Spécifications électriques................................................................................................... 31

INSTRUCTIONS D'INSTALLATION ..................................................................................... 32

Avant de commencer......................................................................................................... 32

Retrait de la base d'expédition et de l'anneau d'emballage................................................ 33

Raccordement du tuyau de vidange................................................................................... 33

Raccordement des tuyaux d'alimentation .......................................................................... 34

Immobilisation du tuyau de vidange .................................................................................. 35

Réglage de l'aplomb de la laveuse..................................................................................... 36

Achever l'installation..........................................................................................................37

AVANTAGES ET CARACTÉRISTIQUES ................................................................................. 37

Avantages........................................................................................................................... 37

Caractéristiques.................................................................................................................. 38

UTILISATION DE LA LAVEUSE............................................................................................. 39

Mise en marche de la laveuse ............................................................................................ 39

Utilisation du détergent approprié...................................................................................... 39

Pause ou remise en marche de la laveuse.......................................................................... 41

Arrêt de la laveuse.............................................................................................................. 41

Changement des programmes, modificateurs et options .................................................... 41

Témoins lumineux.............................................................................................................. 41

Programmes ....................................................................................................................... 42

Modificateurs ..................................................................................................................... 44

Options .............................................................................................................................. 45

Fonctionnement des commandes....................................................................................... 45

Sons normaux ....................................................................................................................46

CONSEILS DE LESSIVAGE..................................................................................................... 46

ENTRETIEN DE LA LAVEUSE................................................................................................. 47

Nettoyage de la laveuse ..................................................................................................... 47

Tuyaux d'arrivée d'eau....................................................................................................... 47

Précautions à prendre avant les vacances, un entreposage ou un déménagement............. 47

DÉPANNAGE ........................................................................................................................ 49

La laveuse et ses composants ............................................................................................. 49

Fonctionnement de la laveuse............................................................................................ 51

Soin des vêtements............................................................................................................. 52

ASSISTANCE OU SERVICE.................................................................................................... 54

Aux États-Unis.................................................................................................................... 54

Au Canada ......................................................................................................................... 54

Accessoires......................................................................................................................... 54

GARANTIE............................................................................................................................. 55

WASHER SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. The parts supplied are in the

washer basket.

Tools needed for connecting the drain hose and water inlet hoses:

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose

installation or replacement dates for future reference.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

■ Read all instructions before using the washer.

■ Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

■ Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

■ Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

this time.

■ Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

■ Before the washer is removed from service or discarded,

remove the door or lid.

■ Do not reach into the washer if the drum, tub or agitator is

moving.

■ Do not install or store the washer where it will be exposed to

the weather.

■ Do not tamper with controls.

■ Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

■ See “Electrical Requirements” for grounding instructions.

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

■ Pliers that open to 1⁹⁄₁₆" (3.95 cm) ■ Flashlight (optional)

Parts supplied:

Tools needed for securing the drain hose and leveling the washer:

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the

items listed here, call the toll-free number on the cover or in the “Assistance or Service”

section.

Location Requirements

Selecting the proper location for your washer improves performance and minimizes noise and

possible washer “walk.”

Your washer can be installed in a basement, laundry room, closet, or recessed area. See

“Drain System.”

IMPORTANT: Do not install or store the washer where it will be exposed to the weather.

Proper installation is your responsibility.

You will need:

■ A water heater set to deliver 120°F (49°C) water to the washer.

■ A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is

attached to the back of the washer. See “Electrical Requirements.”

■ Hot and cold water faucets located within 3 ft (90 cm) of the hot and cold water fill

valves, and water pressure of 20-100 psi (138-690 kPa) for best performance.

■ A level floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the

washer on carpeting is not recommended.

■ A sturdy floor to support the washer weight (washer, water and load) of 315 lbs (143 kgs).

Do not store or operate your washer in temperatures at or below 32°F (0°C). Some water can

remain in the washer and can cause damage in low temperatures. See “Washer Care” for

information on winterizing.

Installation spacing for recessed area and closet installations

The following spacing dimensions are recommended for this washer. This washer has been

tested for installation with spacing of 0" (0 cm) clearance on the sides. Recommended

spacing should be considered for the following reasons:

■ Additional spacing should be considered for ease of installation and servicing.

■

Additional spacing should be considered on all sides of the washer to reduce noise transfer.

■ For closet installation with a door, minimum ventilation openings in the top and bottom of

the door are required. Louvered doors with equivalent ventilation openings are acceptable.

■ Companion appliance spacing should also be considered.

*Required spacing

A. Drain hose form

B. Water inlet hoses (2)

C. Flat water inlet hose washers (4)

D. Beaded tie strap

■ Adjustable or open end

wrench ⁹⁄₁₆" (14 mm)

■ Level

■ Wood block

■ Ruler or measuring tape

If You Have: You Will Need to Buy:

Laundry tub or standpipe

taller than 96" (2.4 m)

Sump pump system (if not already available)

1" (2.5 cm) diameter

standpipe

2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe

adapter, Part Number 3363920 and connector kit Part

Number 285835

Overhead sewer Standard 20 gal. (76 L) 39" (99 cm) tall drain tub or utility

sink, sump pump and connectors (available from local

plumbing suppliers)

Floor drain Siphon break, Part Number 285834; additional drain hose,

Part Number 8318155 and connector kit,

Part Number 285835

Water faucets beyond reach

of fill hoses

2 longer water fill hoses:

6 ft (1.8 m) Part Number 76314,

10 ft (3.0 m) Part Number 350008

Lint clogged drain Drain protector, Part Number 367031

A. Front view B. Side view C. Closet door with vents

17"*

(43.2 cm)

(2.5 cm)

27¹⁄₂"

(69.9 cm)

1"*

(2.5 cm)

27"

(68.6 cm)

5"*

(12.7 cm)

14"

max.

(35.6 cm)

3"*

(7.6 cm)

3"*

(7.6 cm)

24 in. *

(155 cm )

48 in. *

(310 cm )

Drain System

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub

drain system, or the floor drain system. Select the drain hose installation method you need.

See “Tools and Parts.”

Standpipe drain system—wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum

carry-away capacity can be no less than 17 gal. (64 L) per minute. A 2" (5 cm) diameter to

1" (2.5 cm) diameter standpipe adapter kit is available. See “Tools and Parts.”

The top of the standpipe must be at least 39" (99 cm) high and no higher than 96" (244 cm)

from the bottom of the washer.

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be

at least 39" (99 cm) above the floor and no higher than 96" (244 cm) from the bottom of the

washer.

Floor drain system (view D)

The floor drain system requires a siphon break that may be purchased separately. See “Tools

and Parts.”

The siphon break must be a minimum of 28" (71 cm) from the bottom of the washer.

Additional hoses might be needed.

Electrical Requirements

■ A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-

delay fuse or circuit breaker is recommended. It is recommended that a separate circuit

serving only this appliance be provided.

■ This washer is equipped with a power supply cord having a grounded 3 prong plug.

■ To minimize possible shock hazard, the cord must be plugged into a mating, grounded

3 prong outlet, grounded in accordance with local codes and ordinances. If a mating

outlet is not available, it is the personal responsibility and obligation of the customer to

have the properly grounded outlet installed by a qualified electrician.

■ If codes permit and a separate ground wire is used, it is recommended that a qualified

electrician determine that the ground path is adequate.

■ Do not ground to a gas pipe.

39"

(99 cm)

39"

(99 cm)

28"

(71 cm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

■ Check with a qualified electrician if you are not sure the washer is properly grounded.

■ Do not have a fuse in the neutral or ground circuit.

INSTALLATION INSTRUCTIONS

Before You Start

NOTE: To avoid floor damage during installation, set the washer onto cardboard before

moving across floor.

IMPORTANT:

■ Be sure the foam shipping base has been removed from the bottom of the washer as

directed in the Unpacking Instructions.

■ If foam shipping base has not been removed, be sure lid is secured with tape before laying

washer on its back.

■ Removing the foam shipping base is necessary for proper operation.

Remove Shipping Base and Packing Ring

1. Place cardboard supports from shipping carton on floor behind washer for support.

2. Secure the lid with tape.

3. Using 2 or more people, tip the washer onto its back and place on cardboard supports.

4. Remove foam shipping base.

5. Set washer upright.

6. Remove tape from lid. Open lid and remove foam packing ring from washer tub. Keep

foam packing ring in case you need to move the washer in the future.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected washer:

This washer must be grounded. In the event of a malfunction

or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING:

Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance – if it will

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

Connect Drain Hose

Proper connection of the drain hose protects your floors from damage due to water leakage.

Read and follow these instructions.

The drain hose is connected to your washer and is stored inside the washer cabinet.

Remove drain hose from washer cabinet

Pull the corrugated drain hose out of the washer by first grabbing the pull tie. Continue to pull

the hose until the end emerges. Do not force excess drain hose back into the rear of the

washer.

Laundry tub drain or standpipe drain

Connecting the drain hose form to the corrugated drain hose

To keep drain water from going back into the washer:

■ Do not force excess drain hose into standpipe. Hose should be secure but loose enough

to provide a gap for air.

■ Do not lay excess hose on the bottom of the laundry tub.

Floor drain

Do not install the drain hose form on to the corrugated drain hose. You may need additional

parts. See Floor drain under “Tools and Parts.”

Connect the Inlet Hoses

1. Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers

in the couplings.

A. Drain hose reliefs

1. Feed end of drain hose into one end of form. Place end of drain hose

form into the drain hose relief.

2. Bend the hose over the top of the form and feed into the other end of

the form. Attach the other end of the form into the other drain hose

relief. The hose must extend 4½" (11.4 cm) beyond the form.

A. Coupling

B. Washer

4.5"

(11.4 cm)

Connect the inlet hoses to the water faucets

Make sure the washer basket is empty.

2. Attach the hose labeled hot to the hot water faucet. Screw on coupling by hand until it is

seated on the washer.

3. Attach the hose labeled cold to the cold water faucet. Screw on coupling by hand until it

is seated on the washer.

4. Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can

result.

Clear the water lines

■ Run water through both faucets and inlet hoses, into a laundry tub, drainpipe or bucket,

to get rid of particles in the water lines that might clog the inlet valve screens.

■ Check the temperature of the water to make sure that the hot water hose is connected to

the hot water faucet and that the cold water hose is connected to the cold water faucet.

Connect the inlet hoses to the washer

1. Attach the hot water hose to the inlet valve labeled hot.

2. Attaching one hose coupling first makes it easier to tighten the connection with pliers.

3. Screw on coupling by hand until it is seated on the washer.

4. Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can

result.

5. Attach the cold water hose to the inlet valve labeled cold.

6. Screw on coupling by hand until it is seated on the washer.

7. Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves can

result.

Tighten the couplings with an additional two-thirds turn.

A. Hot water inlet valve

B. Cold water inlet valve

HOT

COLD

HOT

COLD

HOT

Check for leaks

■ Turn on the water faucets and check for leaks. A small amount of water might enter the

washer. You will drain this in a later step.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record

hose installation or replacement dates for future reference.

■ If you connect only one water hose, you must cap off the remaining water inlet port.

■ Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Secure the Drain Hose

1. Drape the power cord over the console.

2. Remove any cardboard used to move washer.

3. Fasten the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap.

See view A or B.

If the washer faucets and the drain standpipe are recessed, put the formed end of the drain

hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the

drain hose. See view C.

Level the Washer

One washer foot has been installed at a different height on your new washer. The other three

feet were preset at the factory. Properly leveling your washer will minimize noise and

vibration.

1. Slide the washer to its final location.

2. Push on upper front panel to be sure the washer is on its rear feet.

3. Lower right front foot until it contacts the floor. By hand, firmly rotate foot as much as an

additional 1½ turns. The other three feet have been preset at the factory.

4. Check the levelness of the washer by first placing a level on the lid near the console.

Next, place the level on the side of the washer in the crease between the top of the

washer and the cabinet.

Level the front.

Beaded tie strap

CBA

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

Level the side.

5. If the washer is not level, move the washer out slightly, tip back, prop up the front of the

washer on a wood block. Adjust the feet up or down as necessary by twisting the feet.

Repeat steps 1 through 4 until washer is level.

6. Use a ⁹/₁₆" or 14 mm open-end wrench to turn the locknut counterclockwise on the foot

tightly against the washer cabinet.

IMPORTANT: If the locknut is not tight against the washer cabinet, the washer may

vibrate.

Complete Installation

1. Check the electrical requirements. Be sure that you have the correct electrical supply and

the recommended grounding method. See “Electrical Requirements.”

2. Check that all parts are now installed. If there is an extra part, go back through the steps to

see which step was skipped.

3. Check that you have all of your tools.

4. Keep the foam packing ring from the washer tub for future relocation of the washer.

Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

7. Plug into a grounded 3 prong outlet.

8. Remove any protective film or tape remaining on the washer.

9. Read “Washer Use.”

10. To test and to clean your washer, measure ¹⁄₂ of the detergent manufacturer’s

recommended amount of High Efficiency (HE) powdered or liquid detergent for a

medium-size load and pour it into the detergent dispenser. Close the lid. Press POWER.

Select a normal cycle and press Start. Allow it to complete one whole cycle.

BENEFITS AND FEATURES

Your washer has several benefits and features which are summarized here. Some items may

not apply to your model.

Benefits

High-Efficiency Wash System

Your new top loading, high-efficiency washer saves you time by allowing you to do fewer,

larger loads. It also conserves resources and also lowers your water and energy bills by using

the following innovations.

INTELLIFILL™ Water Level Control

This washer senses the load size and composition through a series of fills and wash motion. It

then adjusts the water level for the best cleaning and rinsing performance. It eliminates the

guesswork. The water level is just right for every wash load size.

NOTE: You may notice during a cycle that the wash load is not completely submerged in

water. This is normal for your washer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Auto Temp Control

The Auto Temp Control system on this washer electronically senses and maintains a uniform

water temperature by regulating incoming water temperatures. Using Auto Temp Control will

help dissolve detergent.

Washer Impeller System

Your new washer works differently than most washers that you are accustomed to. The most

striking difference is that the washer has an washer impeller system. It uses this new

innovative washer impeller at the bottom of the wash basket to move your load through a

mixture of water and detergent. The load is moved from the outside toward the middle with

items coming up in the center and down on the outside edges.

Dispensers

The dispensers make your washer truly automatic. It is unnecessary for you to return to the

washer during the cycle to add detergent, bleach, or fabric softener.

Laundry products are added to the load at the proper time in the wash cycle.

Spin Speeds

This washer is preset to automatically select the spin speed based on the cycle selected.

Depending on your wash load, you can change the preset speeds. The spin speed on this

washer is nearly twice as fast as that of a conventional washer. You may notice different

sounds during a spin cycle because of this higher speed.

Stain Cycle

The Stain Cycle option uses Direct Inject Cleaning Action to help ensure better soil and stain

removal. Stain Cycle reduces the need for pretreatment and is safe for all washable fabrics.

Water flushes through the dispenser to dissolve the detergent. The detergent mixture is then

sprayed onto the load while the washer spins at low speed. This cleaning action will last up to

5 minutes depending on the cycle selected.

The washer then stops spinning, fills with water to the appropriate level and continues

washing with the selected cycle.

High Efficiency (HE) Detergent

This washer is designed for High Efficiency (HE) detergent use only. HE detergents are made to

produce the right amount of suds and give the best performance in low water wash systems.

Features

Innovative Features

Your new washer includes these features that help to reduce noise, increase the ease of use

and improve wash performance.

Electronic Controls

Electronic controls with preset cycles are easy to use whether you are a beginner or an

“expert.”

Quiet Operation

This washer is insulated with sound-dampening materials to reduce washer operation sounds

and noises. On some models, an additional tub wrap is added for extra dampening of

vibration and sound. The washer has an additional bottom sound pad that is included

separately for installation by the customer.

Suspension System

To reduce washer “walk” and “out of balance” conditions, your new washer combines:

■ 4 Spring damper struts to isolate vibration

■ Balance ring at the top and bottom of the wash basket to minimize vibration

■ Operating software designed to sense and correct off-balance loads

Clean Washer Cycle

This washer features an easy-to-use Clean Washer cycle that thoroughly cleans the inside of

your washing machine using higher water volumes in combination with liquid chlorine

bleach. The use of AFFRESH

™

washer cleaner or liquid chlorine bleach with this cycle, will

remove and help avoid odor-causing residue.

Stainless Steel Basket

The stainless steel basket is corrosion resistant and enables higher spin speeds for more water

extraction, reducing drying time.

Self-clean Wash and Rinse Filter System

This washer filters 100% of the wash and rinse water. The water is filtered then recirculated.

The force filter traps sand and dirt, flushing them down the drain, so they are not redeposited

onto the clean clothes.

Delay Wash

Delay Wash allows you to load your washer and pause the start of the cycle for up to

10 hours.

End of Cycle Signal

The End of Cycle Signal produces an audible sound when the wash cycle is finished. This

signal is helpful when you are removing items from the washer as soon as it stops.

Spray Rinse

This washer is designed to save water by rinsing the load with a spray rinse instead of a deep

water rinse on some cycles. When using fabric softener, always select the Fabric Softener

button or select Extra Rinse.

WASHER USE

NOTE: Your washer model may vary from the model shown.

Starting Your Washer

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the

IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

The following is a guide to starting your washer. Periodic references to other sections of this

manual provide more detailed information.

Using the Proper Detergent

Use only High Efficiency detergents. The package for this type of detergent will be marked

“HE” or “High Efficiency.” This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer

errors, longer cycle times and reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew. HE detergents are made to produce the right amount

of suds for the best performance. Follow the manufacturer's instructions to determine the

amount of detergent to use.

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING

1. Place a load of sorted clothes into the washer. See “Laundry Tips.”

■ Load evenly to maintain washer balance. Mix large and small items. Items should

move easily through the wash water.

■ Load only to the top of the basket as shown. Overloading can cause poor cleaning.

Items need to move easily through the wash water.

Pour measured powdered or liquid High Efficiency detergent into the detergent dispenser.

Always use the detergent dispenser, and do not put detergent directly onto clothes in the washer.

3. Add color-safe bleach (powdered or liquid) to this dispenser, if needed. Be sure to match

powdered color-safe bleach with powdered detergent or match liquid color-safe bleach

with liquid detergent.

4. Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser, if needed.

Bleach is diluted and automatically dispensed at the proper time during the wash cycle.

■ Do not overfill. Do not dilute. Do not use more than 1 cup (250 mL) for a full load.

Use less with a smaller load size.

■ Follow the garment and the chlorine bleach manufacturer’s directions for proper use.

■ To avoid spilling, use a cup with a pouring spout. Do not

let bleach splash, drip, or run

down into the washer basket.

■

At the end of the cycle, a small amount of water may be left in the dispenser. This is normal.

NOTE: Use only liquid chlorine bleach in this dispenser.

5. Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

■ Do not overfill. The dispenser holds 3 oz (94 mL), or a capful of fabric softener.

■ The fabric softener is dispensed in the final rinse. If Extra Rinse is selected, the fabric

softener will be dispensed during the Extra Rinse.

■ Do not spill or drip any fabric softener onto the clothes.

■ At the end of the cycle, a small amount of water may be left in the dispenser. This is

normal.

NOTE:

Use only liquid fabric softener in this dispenser.

6. Close the washer lid.

7. Press POWER. This turns on the washer display.

8. Select a Wash Cycle. See “Cycles.”

9. Select the desired Modifiers. See “Modifiers.”

10. Select an Option, if desired. See “Options.”

Select Fabric Softener or Extra Rinse option if you are using liquid fabric softener.

11. Select Delay Wash, if desired. See “Delay Wash” in the “Modifiers” section.

12. Press START. The wash cycle begins, and the display shows the estimated remaining time.

The lid will lock.

NOTE: If you do not press Start within 5 minutes of pressing Power, the washer

automatically shuts off.

Pausing or Restarting the Washer

Add a Garment

You can place additional clothing in the wash when the “Add a Garment” status light is

glowing without sacrificing wash performance.

To add a garment or pause the washer at any time

1. Press PAUSE/CANCEL once.

2. Wait until the Lid Lock light turns off, then open the lid.

3. Add items.

To restart the washer

1. Close the lid and press START.

2. To unlock the lid after the Add a Garment period, press PAUSE/CANCEL once. Pressing

PAUSE/CANCEL twice will cancel the wash cycle.

Use Only

Stopping the Washer

You can stop the wash cycle and drain the tub by pressing the Pause/Cancel button twice or

the Power button once.

Changing Cycles, Modifiers and Options

You can change Cycles, Modifiers and Options anytime before Start is pressed. Not all

Modifiers and Options are available for all cycles.

■ A short tone sounds when a change is selected.

■ Three short tones sound if an unavailable combination is selected. The last selection will

not be accepted.

Changing Cycles after pressing Start

1. Press PAUSE/CANCEL twice to cancel the cycle. The washer will drain.

2. Press POWER.

3. Select the desired wash cycle.

4. Select the desired Modifiers and Options.

5. Press START.

The washer restarts at the beginning of the new cycle.

NOTE: If you do not press Start within 5 minutes of pausing the washer, the washer

automatically shuts off.

Changing Modifiers and Options after pressing Start

You can change a Modifier or Option anytime before the selected Modifier or Option begins

by choosing the desired Modifiers and/or Options.

NOTE: An error tone will sound if your selection is unavailable.

To manually drain the washer and spin the load

1. Press PAUSE/CANCEL twice to cancel the wash cycle and drain the washer.

2. Press POWER.

3. Turn knob to select DRAIN & SPIN.

4. Press START.

When the spin is complete, the lid unlocks. Items can be removed from the washer.

Status Lights

These lights show which portion of the cycle the washer is operating. They also indicate when

you can add other garments to the wash load.

Indicator lights

An indicator light shows which Cycle, Modifiers and Options you have selected.

Estimated Time Remaining

When a wash cycle is started, the estimated time remaining for the cycle, including fills and

drains, will be displayed. The time will count down to the end of the cycle.

Cycles

Turn the knob to choose the right wash cycle for the type of fabrics you are washing. When

the knob points to a cycle, the indicator light for the cycle will glow and the indicator light for

Start will blink. If the default settings for the Modifiers and Options are acceptable, you may

press Start to begin the wash cycle.

Preset Cycle Settings

For ease of use, preset cycle settings provide the recommended fabric care settings for each

cycle.

To use the preset cycle settings:

1. Press POWER.

2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed

(see following chart).

NOTE: The preset times may vary slightly depending on your model.

3. Press START. The wash cycle will begin.

Preset Cycle Settings

*These times are for reference only and may not match your model exactly.

**Cycle time in minutes will appear in the display while you are making selections. The total cycle

time will appear, including an estimated time for drain and fill times, once Start is pressed.

NOTE: Load only to the top of the basket. Overloading can cause poor cleaning. See “Starting

Your Washer.”

IMPORTANT: When washing waterproof/water-resistant items such as plastic lined mattress

pads, shower curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting

available for the cycle and washer model being used.

Whites

This cycle introduces liquid chlorine bleach to the load at the proper time for improved whitening

of your heavily soiled white fabrics. Cycle combines high-speed wash action and high-speed spin

speed. For maximum soil and stain removal, liquid chlorine bleach must be used.

Super Wash

Use this cycle for heavily soiled or sturdy items. Cycle combines high-speed wash action and

high-speed spin. Stain Cycle is the default option for this cycle, but it can be turned off. See

“Changing Cycles, Modifiers and Options.”

Bulky

Use this cycle to wash large items such as comforters, sleeping bags and blankets. This cycle

starts with a soak to thoroughly saturate your large load. This is followed by medium wash

action and medium spin speeds to maintain load balance.

Sheets

Use this cycle for sheets, pillowcases and towels. The wash action of this cycle is designed to

keep large items from tangling and balling up.

IMPORTANT: For best performance, drop items in loose heaps evenly around the basket wall.

Do not load items directly on the impeller for this cycle.

Normal

Use this cycle for normally soiled cottons and mixed fabric loads. Cycle combines high-speed

wash action and high-speed spin.

When washing waterproof/water-resistant items such as plastic lined mattress pads, shower

curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting available for the

cycle and washer model being used.

Wrinkle Control

Use this cycle to wash loads of no-iron fabrics such as sport shirts, blouses, casual business

clothes, permanent press and blends. This cycle uses medium-speed wash action, a low-

speed spin and a cool down process to help reduce wrinkling.

Colors/Jeans

Use this cycle for lightly soiled, dark or highly dyed natural fabrics such as cotton that may be

susceptible to dye loss. Cycle uses low to medium-speed wash action and high-speed spin.

For best results use cold or warm water.

Quick Wash

Use this cycle to wash small, lightly soiled loads that are needed in a hurry. This short cycle

combines high-speed wash action and high-speed spin for the optimal cleaning and

shortened dry times.

Delicate

Use this cycle to wash lightly soiled garments indicating “Machine Washable Silks” or

“Gentle” cycle on the care label. This cycle uses intermittent low speed wash action and low-

speed spin for optimal fabric care.

Garments are labeled “Hand Wash” because:

■ The fiber construction may be sensitive to wash action.

■ The fabric contains sensitive dyes that may bleed.

Handwash

This cycle combines low-speed wash and low-speed spin action to clean items labeled as

“Machine Washable Wool” on the garment care label. Pre Soak and Deep Clean options are

not available in this cycle.

Soak

This cycle is preset for a 41-minute cycle and soak time can be adjusted according to your

needs by selecting Soil Level. After the selected soak period has ended, the washer will drain

but does not spin the load. At the end of Soak, the washer will drain and wait for a wash cycle

to be selected, to complete the cleaning process.

NOTE: Automatic bleach dispensing is not part of the soak cycle.

Rinse & Spin

Use this option to get a deep rinse followed by a high-speed spin. The time display will

include an estimate of how long it will take to fill and drain the washer.

When to use Rinse & Spin:

■ For loads that need rinsing only.

■ For completing a cycle after the power has been off.

Cycle Preset Minutes* Soil Level** Wash/Rinse Temp

Whites 79 Heavy Hot/Cold

Super Wash 66 Heavy Hot/Cold

Bulky 46 Normal Warm/Cold

Sheets 46 Normal Warm/Cold

Normal 43 Normal Warm/Cold

Wrinkle Control 44 Medium Warm/Cold

Colors/Jeans 42 Normal Cold/Cold

Quick Wash 34 Light Warm/Warm

Delicate 36 Light Cold/Cold

Handwash 35 Light Cold/Cold

Clean Washer 41 Medium Warm/Cold

Soak 20 Not applicable Cold/Cold

Rinse & Spin 10 Not applicable Not applicable

Spin Only 60 Not applicable Not applicable

To use or change Rinse & Spin setting:

1. Turn knob to RINSE & SPIN until the Rinse & Spin indicator light glows.

2. Press START.

Spin Only

Spin Only may help shorten drying times for some heavy fabrics or special-care items. Spin

Only may also be used for draining the washer after canceling a cycle or completing a cycle

after a power failure.

To use or change Spin Only setting:

1. Turn knob to SPIN ONLY until the Spin Only indicator light glows.

2. Press START.

Clean Washer

Use the Clean Washer cycle once a month to keep the inside of your washer fresh and clean.

This cycle uses a higher water level. Use with AFFRESH™ washer cleaner tablet or liquid

chlorine bleach to thoroughly clean the inside of your washing machine. This cycle should

not be interrupted. See “Cleaning Your Washer.”

IMPORTANT: Do not place garments or other items in the washer during the Clean Washer

cycle. Use this cycle with an empty wash drum.

Modifiers

Modifiers allow you to further customize your cycles and save energy.

Soil Level

Soil level (wash time) is preset for each wash cycle. See “Preset Cycle Settings” in “Cycles.” As

you press the Soil Level pad, the cycle time (minutes) will increase or decrease in the

Estimated Time Remaining display and a different wash time will appear. To get the minimum

wash time, press the pad until the indicator light next to Light illuminates. This is the shortest

wash time available for that cycle.

■ For most loads, use the time recommended in the preset cycle settings.

■ For heavy soil and sturdy fabrics, press Soil Level to select more wash time, if needed.

■ For light soil and delicate fabrics, press Soil Level to select less wash time, if needed.

Spin Speed

This washer automatically selects the spin speed based on the cycle selected. The preset

speeds can be changed. Spin speeds may vary by cycle.

Wash/Rinse Temp

Select a water temperature based on the type of load you are washing. Use the warmest wash

water safe for fabrics. Follow garment label instructions.

Warm rinses leave the loads drier and more comfortable to handle than cold rinses. However,

warm rinses also increase wrinkling. Cold rinses may help with wrinkling and save energy.

Temperature Guide

NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.

Soils may be difficult to remove.

Auto Temp Control

Auto Temp Control (ATC) electronically senses and maintains a uniform wash and rinse water

temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned On

when a cycle is selected. (See “Preset Cycle Settings” in “Cycles.”)

ATC is available with Warm/Warm, Warm/Cold and Cool/Cold settings. The water

temperature in the Hot/Cold and Cold/Cold settings depend on the water temperature at the

water inlet faucets.

■ ATC ensures consistent cleaning.

■ Heated water consumes the largest amount of energy that a washer uses.

■ Today’s detergents work well at temperatures above 60°F (15.6°C).

Delay Wash

You can use the Delay Wash feature to delay the start of a wash cycle for up to 10 hours

(depending on your model).

1. Load the washer and fill the dispensers.

2. Close the washer lid.

3. Press POWER.

4. Select the desired Cycle, Modifiers and Options.

5. Press DELAY WASH. 1H (one hour) will be displayed in the time display window. The

indicator light for Delay Wash will glow.

6. For a longer delay time, press DELAY WASH. The Start time will increase by 1-hour steps.

Wash Water Temperature Suggested Fabrics

Hot Whites and pastels

Warm Bright colors

Cold Colors that bleed or fade

7. Press START. The countdown in hours to the wash cycle will show in the time display

window and the indicator light will begin to flash.

NOTE: The Start indicator light will not flash when Delay Wash is chosen. You must press

Start to initiate a countdown for the cycle to begin.

To change the Delay Wash time:

■ Press PAUSE/CANCEL.

■ Press DELAY WASH to select the desired delay time.

■ Press START to begin the countdown.

To cancel Delay Wash:

Press START again to begin the cycle right away or press PAUSE/CANCEL twice.

Options

Use these pads to select the desired options for your wash cycle.

Stain Cycle

This option provides enhanced cleaning action for tough stains. The Super Wash cycle

automatically includes Stain Cycle. Choosing Stain Cycle will add approximately 5 minutes

to a cycle. Stain Cycle should be started on a dry load only and cannot be selected after the

tub has started filling with water.

Stain Cycle may be selected as an option with other cycles. See table for details.

Extra Rinse

An extra rinse can be used to aid in the removal of detergent or bleach residue from garments.

This option provides an additional rinse with the same water temperature as the first rinse.

This is the default rinse setting for the Whites cycle.

Fabric Softener

Fabric Softener option must be selected if liquid fabric softener is added to the fabric softener

dispenser. This option flushes the dispenser at the correct time in a deep water rinse for

optimal distribution.

End of Cycle Signal Volume

The End of Cycle Signal produces an audible sound when the wash cycle is finished. This

signal is helpful when you are removing items from the washer as soon as it stops. Select

High, Low or Off.

Operating Controls

Power

Press POWER to turn the washer on or off.

Cycle Stain Cycle

(Adds time to the wash cycle)

Whites Option

Super Wash Default

Bulky Not available

Sheets Not available

Normal Option

Wrinkle Control Option

Colors/Jeans Option

Quick Wash Option

Delicate Option

Handwash Option

Clean Washer Not available

Soak Not available

Rinse & Spin Not available

Spin Only Not available

Cycle Stain Cycle

(Adds time to the wash cycle)

Start

Press START to start your washer after a cycle has been selected. Be sure all desired Modifiers

and Options have been selected. The lid must be closed for the washer to start.

Pause/Cancel

Press PAUSE/CANCEL once to pause or stop the washer at any time. Press PAUSE/CANCEL

once to unlock the lid and add a garment. Press START to complete the cycle from where it

was stopped. Press PAUSE/CANCEL twice to stop the wash cycle. The washer will then drain

and turn off.

Lid Lock

When the Lid Lock status light glows, the washer lid is locked.

NOTE: You must wait until the Lid Lock Light turns off before the lid can be opened.

Normal Sounds

Your new washer may make sounds your old one didn’t. Because the sounds might be

unfamiliar, you may be concerned about them. These sounds are normal.

During washing

If you select the Stain Cycle option, you will hear a spin/spray noise at the start of the cycle.

During drain

If water is drained quickly from your washer (depending on your installation), you may hear

air being pulled through the pump during the end of draining.

During wash and spin

This washer does not have a transmission. The motor provides direct drive for agitation and

spin. You will hear sounds that are different from those of a conventional washer.

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of your garments.

■ Use only High Efficiency detergents. The package for this type of detergent will be marked

“HE” or “High Efficiency.”

This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer

errors, longer cycle times, and reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew.

HE detergents are made to produce the right

amount of suds for the best performance. Follow the manufacturer's instructions to

determine the amount of detergent to use.

■ Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and

other hard objects to avoid scratching the washer interior. Remove non-washable trim and

ornaments.

■ Empty pockets and turn them inside out.

■ Turn down cuffs; brush away lint and dirt.

■ Turn synthetic knits inside out to avoid pilling.

■ Tie strings and sashes so they will not tangle.

■ Mend tears, loose hems, and seams.

■ Treat spots and stains.

■ Stained or wet garments should be washed promptly for best results.

■ Turn wool knits inside out before washing.

Sorting

■ Separate heavily soiled items from lightly soiled ones, even if they would normally be

washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy,

synthetics, permanent press). When possible, turn lint-givers inside out.

■ Separate dark colors from light colors, colorfast items from noncolorfast items.

■ Sort by fabric and construction (sturdy cottons, knits, delicate items).

■ Separate bulky, nonabsorbent items such as comforters, pillows and poly-filled jackets.

Use the Bulky cycle for these items.

■ Separate sheets, pillowcases and towels and use the Sheets cycle for these items. For best

performance, drop items in loose heaps evenly around the basket wall and do not load

items directly on the impeller for this cycle.

■ When washing waterproof/water-resistant items such as plastic lined mattress pads,

shower curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting

available for the cycle and washer model being used.

Unloading

■ Remove clothes from washer after the cycle is completed. Metal objects such as zippers,

snaps, and buckles may rust if left in the washer basket for a long time.

Use only “HE” High Efficiency detergent.

WASHER CARE

Cleaning Your Washer

Washer Maintenance Procedure

This washer has a special cycle that uses higher water volumes, in combination with AFFRESH™

washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer.

NOTES:

■ Read these instructions completely before beginning the cleaning process.

■ It is recommended that you allow the cleanout cycle to complete without interruptions. If

necessary, the cleanout cycle may be interrupted by pressing the Power button once or

the Pause/Cancel button twice.

IMPORTANT: If the cleanout cycle is interrupted, run a Rinse & Spin cycle to ensure that

all remaining bleach is rinsed from the washer.

Begin procedure

1. Open the washer door and remove any clothing or items from the washer.

2. Using the AFFRESH™ washer cleaner (Recommended):

Add one AFFRESH™ washer cleaner tablet to the washer drum.

If using liquid chlorine bleach:

Add 1 cup (250 mL) liquid chlorine bleach to the bleach dispenser.

NOTE: Do not add any detergent to this cleaning cycle. Use of more than 1 cup

(250 mL) of bleach will cause product damage over time.

3. Close the lid.

4. Press POWER.

5. Turn Cycle Control knob to Clean Washer cycle.

■ The Estimated Time Remaining display will show approximately 60 minutes.

6. Press START.

■ The cycle will begin and water will dispense in the washer for a moment and pause,

then the lid will lock and the cycle will continue.

■ Once the cleaning cycle has begun, allow the cycle to complete. An estimated cycle

time will appear on the display.

Always do the following to maintain washer freshness

■ Use only High Efficiency (HE) detergent when washing a clothes load.

■ Repeat the cleaning procedure monthly, using one AFFRESH™ clean washer tablet or

1 cup (250 mL) of liquid chlorine bleach.

■ If the procedure does not sufficiently improve washer freshness, evaluate your installation

and usage conditions for other causes.

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your

washer to keep it looking new. Use mild soap and water. Do not use abrasive products.

Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect

and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent

marker.

Vacation, Storage and Moving Care

Install and store your washer where it will not freeze. Because some water may stay in the

hoses, freezing can damage your washer. If storing or moving your washer during freezing

weather, winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on vacation or not using your

washer for an extended period of time, you should:

■ Unplug washer or disconnect power.

■ Turn off the water supply to the washer. This helps avoid unintended flooding (due to a

water pressure surge) while you are away.

To winterize washer:

1. Shut off both water faucets.

2. Disconnect and drain water inlet hoses.

3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.

4. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and

remaining water.

5. Unplug washer or disconnect power.

La page charge ...

Maytag MTW6700TQ - 28" Washer Mode d'emploi

Marque: Maytag

Modèle: MTW6700TQ - 28" Washer

Catégorie: Machines à laver

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag MTW6700TQ - 28" Washer User guide

Maytag MTW6700TQ - 28" Washer Mode d'emploi

Maytag MTW6700TQ - 28" Washer Mode d'emploi

dans d''autres langues

Documents connexes