Canvas 3-Light Le manuel du propriétaire

Taper
Le manuel du propriétaire
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT:Pleasereadthismanualcarefully
beforebeginningassemblyofthisproduct.
Keepthismanualforfuturereference.
PRODUCT NO.
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT:Pleasereadthismanualcarefully
beforebeginningassemblyofthisproduct.
Keepthismanualforfuturereference.
PRODUCT NO.
PRODUCT NO. 152-2617-0
3-LIGHT VANITY
VENLAW
We believe in the power of cor and its
ability to make up the fabric of your home.
That’s why CANVAScollections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
cor and all your outdoor living essentials,
CANVAS™ makes it easy to refresh your space
to reflect your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website at
canadiantire.ca to tell us about your
experience, and share your photos with us
using #myCANVASstyle.
Show us how you bring CANVASproducts
to life. We can’t wait to see!
WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.
TABLE OF CONTENTS
CLEANING: Before cleaning your fixture, turn off the switch or power source.
Wipe the fixture with a soft, damp cloth.
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
TOOLS REQUIRED
READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS BEFORE
INSTALLING FIXTURE. GENERAL INSTRUCTIONS:
1. All electrical connections must be made in accordance with local
codes, ordinances and the Canadian Electrical Code.
2. These fixtures should be mounted on an electrical outlet box. The box must
be directly supported by the building structure.
3. Turn off the circuit breaker or remove the appropriate fuse to disconnect
power source before installing fixture.
4. Turning the light switch off to cut the power is not sufficient to prevent
electric shock. When in doubt about the safety of any electrical installation or
repair, consult a qualified electrician.
VENLAW
Tools Required 3
Parts List 4
Hardware List 5
Exploded Parts 6
Before You Begin Assembly 7
Electrical Installation 8
Step-by-step Guide 9
Technical Data 13
Assembly Troubleshooting 14
Product Troubleshooting 14
Caring for Your Item 14
Warranty 15
3
Safety
Goggles
Electrical
Tape
No. 2 Cross-head
Screwdriver
Wire
Cutter
Wire
Stripper
Flathead
Screwdriver
Ladder
ITEM DESCRIPTION THUMBNAIL QUANTITY
1
3
2
PARTS LIST
Main fixture body 1
Socket cup 3
Glass shade 3
VENLAW4
HARDWARE LIST
A
C
E
B
D
F
G
ITEM DESCRIPTION THUMBNAIL QUANTITY
Decorative nut 2
Wire nut 3
Fixture screw 2
Hex nut 2
Mounting screw 2
Mounting bracket 1
60 W (max.) ST19 bulb
base E26 (sold separately) 3
VENLAW 5
EXPLODED PARTS
VENLAW6
3X
G(sold separately)
3X
3
3X
2
2X
A
1
READ EACH STEP CAREFULLY
Make sure you understand each step. If you have any questions,
contact CANVAS™ customer service at 1-888-670-6684 (toll-free).
MAKE SURE ALL PARTS ARE PRESENT
Compare all pieces to the parts and hardware lists, and make sure
you have all tools required for assembly.
ASSEMBLE IN A CLEARED AREA
Place all parts from the box on the floor in front of you on a clean,
dry, level surface to protect the product as it is being built.
REMOVE PACKAGING MATERIALS
Place packing materials back in the box. Do not dispose of
packaging materials until assembly is complete.
BEFORE YOU BEGIN ASSEMBLY
VENLAW 7
STEP 1
Place the wall switch to the “OFF” position.
WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.
Place either the main (Master) switch to
the “OFF” position, cutting off power to
your entire home, OR turn off the
individual switch that provides power to
where the fixture will be installed.
Place either the main (Master) switch to
the “OFF” position, cutting off power to
your entire home, OR unscrew the fuse
that provides power to where the fixture
will be installed.
NOTE: Shutting off a wall switch that
controls the light is not sufficient to
prevent electric shock.
STEP 2
Depending on which type of fuse box you have in your home:
ELECTRICAL INSTALLATION
VENLAW8
STEP-BY-STEP GUIDE
VENLAW
STEP 1
BX2 DX2 EX2 FX1
9
1X1
E
D
B
F
1
Thread the fixture screws E into the provided holes of the mounting bracket F.
Thread the hex nuts Bonto the fixture screws E. Do not tighten the hex nuts Bat this
time.
Pull the supply wires out from the outlet box and mount the mounting bracket F to the
outlet box using the mounting screws D.
Place the main fixture body 1over the outlet box and onto the fixture screws E.
Adjust the fixture screws E until they protrude out from the main fixture body 1 1/4” (6
mm).
Remove the main fixture body 1and secure the position of the fixture screws E by
tightening the hex nuts Bagainst the mounting bracket F.
STEP-BY-STEP GUIDE
VENLAW
STEP 2
CX3
10
NOTE: If you have electrical
questions, consult your local
electrical code for approved
grounding methods.
WARNING! MAKE SURE NO BARE WIRING IS EXPOSED WHEN THE WIRE
CONNECTORS ARE INSTALLED (EXCEPT FOR THE GROUND WIRE).
GROUND WIRE
BLACK WIRE
WHITE WIRE
Connect the black supply wire to the black fixture wire using a wire nut C.
Connect the white supply wire to the white fixture wire using a wire nut C.
Wrap the fixture ground wire one turn around the green ground screw of the mounting
bracket F, leaving about 3” (7.6 cm) extra wire extending from the screw. Tighten the
screw.
Connect the fixture ground wire to the supply ground wire using a wire nut C.
Wrap all wire connections with electrical tape for a more secure connection.
1
C
F
STEP-BY-STEP GUIDE
Place the back plate of the main fixture body 1onto the fixture screws Eand secure
it into place by using the decorative nuts Aprovided.
VENLAW
STEP 3
AX2
11
NOTE: The main fixture body
1can be installed with the glass
shades 2oriented either
upward or downward.
.
E
1
A
STEP-BY-STEP GUIDE
Slide a glass shade 2over each socket on the main fixture body 1.
Secure a glass shade 2to each socket using the socket cup 3
Install an incandescent light bulb Gor listed SBCFL, or LED equivalent into the
sockets of the main fixture body 1.
.
VENLAW
STEP 4
NOTE: Bulb is sold separately.
NOTE: Do not exceed a 60 watt
incandescent light bulb or SBCFL
or LED equivalent.
NOTE: Do not over tighten the
socket cup to prevent damaging
the glass.
3
2
1
G
12
3X3 GX32X3
TECHNICAL DATA
SPECIFICATIONS
ASSEMBLED DIMENSIONS WITHOUT BULBS (W×H)
ASSEMBLED WEIGHT
VENLAW
22 7/8 × 7 1/2 × 8 5/8”
58 × 19 × 22 cm
4 lb 1 oz
1.9 kg
22 7/8”
(58 cm)
8 5/8”
(22 cm)
13
HAVING TROUBLE?
LET US HELP YOU!
BEFORE RETURNING
YOUR PRODUCT
CALL US;
WE CAN HELP
If you have questions regarding your product or require
warranty assistance, please call our customer service helpline.
TOLL-FREE:
1-888-670-6684
ASSEMBLY TROUBLESHOOTING
PRODUCT TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES SOLUTION
CARING FOR YOUR ITEM
1
2
3
Make sure the power
supply is on.
The power supply is off.
Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Use a dry or slightly dampened clean cloth and wipe the exterior surface of the
fixture.
To clean the interior of the fixture, disconnect the power to the fixture by turning off
the circuit breaker or by removing the fuse at the fuse box, and then use a slightly
dampened clean cloth to wipe the interior surface of the fixture.
VENLAW
The light will not turn on.
Check the wire
connections.
The fixture is wired
incorrectly.
Replace the light bulb.The light bulb is dead.
Test or replace the
switch.
The switch is faulty.
Check the wiring.The fixture is wired
incorrectly.
The fuse blows or the
circuit breaker trips when
the light is turned on.
14
1-YEAR LIMITED WARRANTY*
This CANVAS™ product carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace the defective product free of charge within the
stated warranty period, when returned by the original purchaser with proof of purchase. This
product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
PRODUCT NO.
WARRANTY INFORMATION
152-2617-0
VENLAW 15
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT:Pleasereadthismanualcarefully
beforebeginningassemblyofthisproduct.
Keepthismanualforfuturereference.
PRODUCT NO.
INSTRUCTIONS D’ASSEMBLAGE
DES DIFFICULTÉ S?
NUMÉ RO SANS FRAIS :
1 888 670-6684
IMPORTANT: Veuillez lire attentivement ce manuel
avant de commencer l’assemblage de ce produit.
Conservez ce guide aux fins de consultation ultérieure.
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT:Pleasereadthismanualcarefully
beforebeginningassemblyofthisproduct.
Keepthismanualforfuturereference.
PRODUCT NO.
DE MODÈ LE :
RAMPE D’ÉCLAIRAGE À 3 LUMIÈRES
VENLAW
152-2617-0
Nous croyons au pouvoir de la décoration
et à sa capacité de façonner votre maison.
C’est pourquoi nous nous inspirons des
gens du pays et de leur mode de vie pour
concevoir la collection de CANVASMC.
Qu’il s’agisse de meubles tendance, de
corations pour les fêtes ou pour le plein air,
CANVASMC vous permet de rafraîchir
facilement votre espace pour qu’il reflète
votre style unique et votre mode de vie.
Nous serions ravis de connaître votre opinion
et nous vous invitons à nous faire part de vos
commentaires. Visitez notre site Web à
l’adresse canadiantire.ca pour nous faire part
de votre expérience et partagez vos photos
en utilisant le mot-clic #MonStyleCANVAS.
Montrez-nous comment vous donnez vie aux
articles CANVASMC. Nous avons te de les
voir!
AVERTISSEMENT! CONSULTEZ UN É LECTRICIEN QUALIFIÉ POUR
TERMINER SI VOUS AVEZ LE BON CONDUCTEUR DE CIRCUIT
DE DÉ RIVATION.
TABLE DES MATIÈ RES
NETTOYAGE : Avant de nettoyer votre luminaire, mettez l’interrupteur en position
d’arrêt ou coupez la source d’alimentation.
Essuyez le lampadaire avec un chiffon doux et humide.
IMPORTANT : CONSERVEZ CE GUIDE AUX FINS DE CONSULTATION
ULTÉ RIEURE, ET LISEZ-LE ATTENTIVEMENT.
OUTILS REQUIS
LISEZ LES INSTRUCTIONS ET EXAMINEZ TOUS LES SCHÉ MAS
AVANT D’INSTALLER LE LUMINAIRE. INSTRUCTIONS GÉNÉRALES :
1. Tous les raccordements électriques doivent être conformes aux
normes et règlements locaux et au Code canadien de l’électricité.
2. Ces luminaires doivent être installés sur une boîte de sortie électrique. La boîte
de sortie doit être directement soutenue par la structure du bâtiment.
3. É teignez le disjoncteur ou retirez le fusible approprié pour déconnecter la
source d’alimentation avant d’installer le luminaire.
4. Mettre l’interrupteur de lumière en position d’arrêt pour couper l’alimentation
n’est pas suffisant pour éviter un choc électrique. En cas de doute sur la sécurité
d’une installation ou d’une réparation électrique, consultez un électricien qualifié.
Outils requis 19
Liste des pièces 20
Liste du matériel 21
Vue éclatée 22
Avant de commencer l’assemblage 23
Installation électrique 24
Guide étape par étape 25
Fiche technique 29
Problèmes lors de l’assemblage 30
pannage 30
Entretien de votre article 30
Garantie 31
19VENLAW
Tournevis àte
cruciforme nº 2
Coupe
-fils
Pince à
nuder
Tournevis à
te plate
Escabeau
Lunettes de
curité
Ruban
isolant
RENCE DESCRIPTION ILLUSTRATION QUANTITÉ
1
3
2
LISTE DES PIÈ CES
Corps principal du
luminaire 1
Coupelle de douille 3
20 VENLAW
3
Diffuseur en verre
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Canvas 3-Light Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues