Canvas Elworthy 1-Light Le manuel du propriétaire

Taper
Le manuel du propriétaire
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT:Pleasereadthismanualcarefully
beforebeginningassemblyofthisproduct.
Keepthismanualforfuturereference.
PRODUCT NO.
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT:Pleasereadthismanualcarefully
beforebeginningassemblyofthisproduct.
Keepthismanualforfuturereference.
PRODUCT NO.
PRODUCT NO. 152-2609-0
1-LIGHT PENDANT
HILLSIDE
We believe in the power of cor and its
ability to make up the fabric of your home.
That’s why CANVAScollections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
cor and all your outdoor living essentials,
CANVASmakes it easy to refresh your space
to reflect your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website at
canadiantire.ca to tell us about your
experience, and share your photos with us
using #myCANVASstyle.
Show us how you bring CANVASproducts
to life. We cant wait to see!
WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.
TABLE OF CONTENTS
CLEANING: Before cleaning your fixture, turn off the switch or power source.
Wipe the fixture with a soft, damp cloth.
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
TOOLS REQUIRED
READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS BEFORE
INSTALLING FIXTURE. GENERAL INSTRUCTIONS:
1. All electrical connections must be made in accordance with local
codes, ordinances and the Canadian Electrical Code.
2. These fixtures should be mounted on an electrical outlet box. The box must
be directly supported by the building structure.
3. Turn off the circuit breaker or remove the appropriate fuse to disconnect
power source before installing fixture.
4. Turning the light switch off to cut the power is not sufficient to prevent
electric shock. When in doubt about the safety of any electrical installation or
repair, consult a qualified electrician.
3HILLSIDE
Tools Required 3
Parts List 4
Hardware List 5
Exploded Parts 6
Before You Begin Assembly 7
Electrical Installation 8
Step-by-step Guide 9
Technical Data 14
Assembly Troubleshooting 15
Product Troubleshooting 15
Caring for Your Item 15
Warranty 16
No. 2 Cross-head
Screwdriver
Wire
Cutter
Wire
Stripper
Flathead
Screwdriver
Ladder
Safety
Goggles
Electrical
Tape
ITEM DESCRIPTION THUMBNAIL QUANTITY
1
3
5
2
4
6
7
PARTS LIST
Canopy 1
Short tube with
threading 1
Socket 1
Short tube without
threading 1
Long tube 2
Glass shade 1
Socket cup 1
4HILLSIDE
.
HARDWARE LIST
A
C
E
B
D
F
G
ITEM DESCRIPTION THUMBNAIL QUANTITY
Decorative nut 2
Wire nut 3
Fixture screw 2
Hex nut 2
Mounting screw 2
Mounting bracket 1
60 W (Max.) T10 bulb
base E26 (sold separately) 1
5HILLSIDE
EXPLODED PARTS
6HILLSIDE
.
5
6
7
G(sold separately)
2
3
2X
4
2X
A
1
READ EACH STEP CAREFULLY
Make sure you understand each step. If you have any questions,
contact CANVAS™ customer service at 1-888-670-6684 (toll-free).
MAKE SURE ALL PARTS ARE PRESENT
Compare all pieces to the parts and hardware lists, and make sure
you have all tools required for assembly.
ASSEMBLE IN A CLEARED AREA
Place all parts from the box on the floor in front of you on a clean,
dry, level surface to protect the product as it is being built.
REMOVE PACKAGING MATERIALS
Place packing materials back in the box. Do not dispose of
packaging materials until assembly is complete.
BEFORE YOU BEGIN ASSEMBLY
7HILLSIDE
STEP 1
Place the wall switch to the OFFposition.
WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE
CORRECT BRANCH CIRCUIT CONDUCTOR.
Place either the main (Master) switch to
the OFFposition, cutting off power to
your entire home, OR turn off the
individual switch that provides power to
where the fixture will be installed.
Place either the main (Master) switch to
the OFFposition, cutting off power to
your entire home, OR unscrew the fuse
that provides power to where the fixture
will be installed.
NOTE: Shutting off a wall switch that
controls the light is not sufficient to
prevent electric shock.
STEP 2
Depending on which type of fuse box you have in your home:
ELECTRICAL INSTALLATION
8HILLSIDE
STEP-BY-STEP GUIDE
STEP 1
BX2 FX1DX2 EX21X1
Thread the fixture screws E into the
provided holes of the mounting
bracket F.
Thread the hex nuts Bonto the
fixture screws E. Do not tighten the
hex nuts Bat this time.
Pull the supply wires out from the
outlet box and mount the mounting
bracket F to the outlet box using
the mounting screws D.
Place the canopy 1over the outlet
box and onto the fixture screws E.
Adjust the fixture screws E until
they protrude out from the canopy 1
1/4” (6 mm).
Remove the canopy 1and secure
the position of the fixture screws E
by tightening the hex nuts Bagainst
the mounting bracket F.
9
F
D
E
B
1
HILLSIDE
STEP-BY-STEP GUIDE
Determine the desired fixture height and amount of tubes
(2, 3, and/or 4) needed; either increase or decrease the
amount and combination of tubes.
Install and tighten each tube (2, 3, and/or 4) one at a time.
For easier installation, feed wires from the socket 5through
tube (2, 3, and/or 4) and screw it tightly to socket 5or
previously installed tube(s) (2, 3, and/or 4).
Feed wires from the last tube (2, 3, and/or 4) into the
canopy 1. Screw canopy 1into last tube (2, 3, and/or 4).
3X1 4X2 5X12X1
.
10
NOTE: The tubes are
optional. You do not need
to use any or all of the
tubes (2, 3, and 4).
NOTE: Ensure the
components are screwed
together until secure and
do not come loose.
STEP 2
WARNING! ENSURE WIRING IS
NOT PINCHED, PULLED OR
TWISTED DURING INSTALLATION.
.
2
1
3
5
4
HILLSIDE
STEP-BY-STEP GUIDE
11HILLSIDE
CX3
Connect the black supply wire to the black fixture wire using a wire nut C.
Connect the white supply wire to the white fixture wire using a wire nut C.
Wrap the fixture ground wire one turn around the green ground screw of the
mounting bracket F, leaving about 3” (7.6 cm) extra wire extending from the screw.
Tighten the screw.
Connect the fixture ground wire and the supply ground wire using a wire nut C.
Wrap all wire connections with electrical tape for a more secure connection.
NOTE: If you have
electrical questions,
consult your local
electrical code for
approved grounding
methods.
STEP 3
GROUND WIRE
BLACK WIRE
WHITE WIRE
1
C
F
STEP-BY-STEP GUIDE
Place the canopy 1over the fixture screws Eand secure the canopy 1with the
decorative nuts A.
AX2
12
STEP 4
5
1
A
E
.
HILLSIDE
STEP-BY-STEP GUIDE
NOTE: Bulb is sold separately.
NOTE: Do not exceed a 60
watt incandescent light bulb or
SBCFL or LED equivalent.
Place a glass shade 6over the socket 5and
secure it in place using a socket cup 7.
Install an incandescent light bulb Gor listed
SBCFL, or LED equivalent into the socket 5.
6X1 7X1GX1
13
STEP 5
.
5
G
6
7
HILLSIDE
TECHNICAL DATA
SPECIFICATIONS
ASSEMBLED DIMENSIONS WITHOUT BULBS (W× H)
ASSEMBLED WEIGHT
MIN. HANGING HEIGHT
MAX. HANGING HEIGHT
7 1/2”
(19 cm)
20 ̶50
(51 ̶127 cm)
14
7 1/2 × 7 1/2 × 20 ̶50
19 × 19 × 51 ̶127 cm
2 lb 15 oz
1.3 kg
20
51 cm
50
127 cm
(maximum weight; weight may vary depending on how many tubes are used)
HILLSIDE
HAVING TROUBLE?
LET US HELP YOU!
BEFORE RETURNING
YOUR PRODUCT
CALL US;
WE CAN HELP
If you have questions regarding your product or require
warranty assistance, please call our customer service helpline.
TOLL-FREE:
1-888-670-6684
ASSEMBLY TROUBLESHOOTING
PRODUCT TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES SOLUTION
CARING FOR YOUR ITEM
1
2
3
Make sure the power
supply is on.
The power supply is off.
Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Use a dry or slightly dampened clean cloth and wipe the exterior surface of the
fixture.
To clean the interior of the fixture, disconnect the power to the fixture by turning off
the circuit breaker or by removing the fuse at the fuse box, and then use a slightly
dampened clean cloth to wipe the interior surface of the fixture.
15
The light will not turn on.
Check the wire
connections.
The fixture is wired
incorrectly.
Replace the light bulb.The light bulb is dead.
Test or replace the
switch.
The switch is faulty.
Check the wiring.The fixture is wired
incorrectly.
The fuse blows or the
circuit breaker trips when
the light is turned on.
HILLSIDE
1-YEAR LIMITED WARRANTY*
This CANVASproduct carries a one (1) year warranty against defects in workmanship and
materials. Trileaf Distribution agrees to replace the defective product free of charge within the
stated warranty period, when returned by the original purchaser with proof of purchase. This
product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
PRODUCT NO.
WARRANTY INFORMATION
152-2609-0
16 HILLSIDE
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT:Pleasereadthismanualcarefully
beforebeginningassemblyofthisproduct.
Keepthismanualforfuturereference.
PRODUCT NO.
INSTRUCTIONS DASSEMBLAGE
DES DIFFICULTÉ S?
NUMÉ RO SANS FRAIS :
1 888 670-6684
IMPORTANT: Veuillez lire attentivement ce manuel
avant de commencer lassemblage de ce produit.
Conservez ce guide aux fins de consultation ultérieure.
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT:Pleasereadthismanualcarefully
beforebeginningassemblyofthisproduct.
Keepthismanualforfuturereference.
PRODUCT NO.
DE MODÈ LE : 152-2609-0
SUSPENSION À 1 LUMIÈ RE
HILLSIDE
Nous croyons au pouvoir de la décoration
et à sa capacité de façonner votre maison.
Cest pourquoi nous nous inspirons des
gens du pays et de leur mode de vie pour
concevoir la collection de CANVASMC.
Quil sagisse de meubles tendance, de
corations pour les fêtes ou pour le plein air,
CANVASMC vous permet de rafraîchir
facilement votre espace pour quil reflète
votre style unique et votre mode de vie.
Nous serions ravis de connaître votre opinion
et nous vous invitons à nous faire part de vos
commentaires. Visitez notre site Web à
ladresse canadiantire.ca pour nous faire part
de votre expérience et partagez vos photos
en utilisant le mot-clic #MonStyleCANVAS.
Montrez-nous comment vous donnez vie aux
articles CANVASMC. Nous avons te de les
voir!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Canvas Elworthy 1-Light Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues