Canvas Glenthorne 6-Light Le manuel du propriétaire

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT:Pleasereadthismanualcarefully

beforebeginningassemblyofthisproduct.

Keepthismanualforfuturereference.

PRODUCT NO.

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT: Please read this manual carefully

before beginning assembly of this product.

Keep this manual for future reference.

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT:Pleasereadthismanualcarefully

beforebeginningassemblyofthisproduct.

Keepthismanualforfuturereference.

PRODUCT NO.

PRODUCT NO. 152-2645-2

6-LIGHT CHANDELIER

GLENTHORNE

We believe in the power of décor and its

ability to make up the fabric of your home.

That’s why CANVAS™ collections draw

inspiration from Canadians and the way

they live.

From on-trend furniture pieces to holiday

décor and all your outdoor living essentials,

CANVAS™ makes it easy to refresh your space

to reflect your unique style and the way you

live every day.

We would love to hear from you and welcome

your thoughtful feedback. Visit our website at

canadiantire.ca to tell us about your

experience, and share your photos with us

using #myCANVASstyle.

Show us how you bring CANVAS™ products

to life. We can’t wait to see!

WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE

CORRECT BRANCH CIRCUIT CONDUCTOR.

TABLE OF CONTENTS

CLEANING: Before cleaning your fixture, turn off the switch or power source.

Wipe the fixture with a soft, damp cloth.

IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.

TOOLS REQUIRED

READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS BEFORE

INSTALLING FIXTURE. GENERAL INSTRUCTIONS:

1. All electrical connections must be made in accordance with local

codes, ordinances and the Canadian Electrical Code.

2. These fixtures should be mounted on an electrical outlet box. The box must

be directly supported by the building structure.

3. Turn off the circuit breaker or remove the appropriate fuse to disconnect

power source before installing fixture.

4. Turning the light switch off to cut the power is not sufficient to prevent

electric shock. When in doubt about the safety of any electrical installation or

repair, consult a qualified electrician.

GLENTHORNE

Tools Required 3

Parts List 4

Hardware List 5

Exploded Parts 6

Before You Begin Assembly 7

Electrical Installation 8

Step-by-step Guide 9

Technical Data 13

Assembly Troubleshooting 14

Product Troubleshooting 14

Caring for Your Item 14

Warranty 15

No. 2 Cross-head

Screwdriver Wire

Cutter

Wire

Stripper

Flathead

Screwdriver

Ladder

Safety

Goggles

Electrical

Tape

3

ITEM DESCRIPTION THUMBNAIL QUANTITY

1

3

5

2

4

PARTS LIST

Canopy 1

Long tube 2

Main fixture body 1

Short tube 2

Central post 1

GLENTHORNE4

HARDWARE LIST

A

C

E

B

D

F

G

ITEM DESCRIPTION THUMBNAIL QUANTITY

Decorative nut 2

Wire nut 3

Fixture screw 2

Hex nut 2

Mounting screw 2

Mounting bracket 1

60 W (max.) G16.5 bulb

base E12 (sold separately) 6

GLENTHORNE 5

EXPLODED PARTS

GLENTHORNE6

2X

A

1

2X

2

2X

3

5

6X

G

(sold separately)

4

READ EACH STEP CAREFULLY

Make sure you understand each step. If you have any questions,

contact CANVAS™ customer service at 1-888-670-6684 (toll-free).

MAKE SURE ALL PARTS ARE PRESENT

Compare all pieces to the parts and hardware lists, and make sure

you have all tools required for assembly.

ASSEMBLE IN A CLEARED AREA

Place all parts from the box on the floor in front of you on a clean,

dry, level surface to protect the product as it is being built.

REMOVE PACKAGING MATERIALS

Place packing materials back in the box. Do not dispose of

packaging materials until assembly is complete.

BEFORE YOU BEGIN ASSEMBLY

GLENTHORNE 7

STEP 1

Place the wall switch to the “OFF” position.

WARNING! CONSULT A QUALIFIED ELECTRICIAN TO ENSURE

CORRECT BRANCH CIRCUIT CONDUCTOR.

•Place either the main (Master) switch to

the “OFF” position, cutting off power to

your entire home, OR turn off the

individual switch that provides power to

where the fixture will be installed.

•Place either the main (Master) switch to

the “OFF” position, cutting off power to

your entire home, OR unscrew the fuse

that provides power to where the fixture

will be installed.

NOTE: Shutting off a wall switch that

controls the light is not sufficient to

prevent electric shock.

STEP 2

Depending on which type of fuse box you have in your home:

ELECTRICAL INSTALLATION

GLENTHORNE8

STEP-BY-STEP GUIDE

D

E

1

F

B

STEP 1

Thread the fixture screws E into the

provided holes of the mounting

bracket F.

Thread the hex nuts Bonto the

fixture screws E. Do not tighten the

hex nuts Bat this time.

Pull the supply wires out from the

outlet box and mount the mounting

bracket F to the outlet box using

the mounting screws D.

Place the canopy 1over the outlet

box and onto the fixture screws E.

Adjust the fixture screws E until

they protrude out from the canopy 1

1/4” (6 mm).

Remove the canopy 1and secure

the position of the fixture screws E

by tightening the hex nuts Bagainst

the mounting bracket F.

GLENTHORNE

BX2 DX2 EX21X1 FX1

9

STEP-BY-STEP GUIDE

To assemble fixture rotate the arms on the main fixture

body 5so that the arms are evenly spaced.

Attach the central tube 4to the main fixture body 5.

Determine the desired fixture height and amount of

tubes (2and/or 3) as needed; either increase or

decrease the amount and combination of tubes.

Install and tighten each tube (2and/or 3) one at a

time. For easier installation, feed wires from the central

tube 4, through the tube (2and/or 3) and screw

tube tightly to central tube 4or previously installed

tube(s) (2and/or 3).

Feed wires from the last tube (2and/or 3) into the

canopy 1. Screw Canopy 1into last tube (2and/or 3).

GLENTHORNE

STEP 2

10

3X2 4X1 5X12X2

2

3

4

5

1

WARNING! ENSURE

WIRING IS NOT PINCHED,

PULLED OR TWISTED

DURING INSTALLATION.

NOTE: The tubes are optional. You do not

need to use any or all of the tubes 2and 3.

NOTE: Ensure the components are screwed

together until secure and do not come

loose.

STEP-BY-STEP GUIDE

Connect the black supply wire to the black fixture wire using a wire nut C.

Connect the white supply wire to the white fixture wire using a wire nut C.

Connect the fixture ground wire to the supply ground wire using a wire nut C.

Wrap all wire connections with electrical tape for a more secure connection.

CX3

NOTE: If you have

electrical questions, consult

your local electrical code

for approved grounding

methods.

BLACK WIRE

GROUND WIRE

WHITE WIRE

WARNING!

MAKE SURE NO

BARE WIRING IS

EXPOSED WHEN

THE WIRE

CONNECTORS

ARE INSTALLED

(EXCEPT FOR

THE GROUND

WIRE).

C

1

STEP 3

GLENTHORNE 11

STEP-BY-STEP GUIDE

Install the light fixture to the ceiling

by aligning the holes in the canopy 1

with the fixture screws E. Secure

canopy 1in place with the

decorative nuts A.

Install an incandescent light bulb G

or listed SBCFL, or LED equivalent

into the E12 base sockets of the main

fixture body 5.

GLENTHORNE

STEP 4

NOTE: Bulb is sold

separately.

NOTE: Do not exceed a 60

watt incandescent light bulb

or SBCFL or LED equivalent.

12

AX2 GX6

G

5

A

E

1

TECHNICAL DATA

SPECIFICATIONS

ASSEMBLED DIMENSIONS WITHOUT BULBS (W×D×H)

ASSEMBLED WEIGHT

MIN. HANGING HEIGHT

MAX. HANGING HEIGHT

GLENTHORNE

25 × 25 × 26  55 7/8”

64 × 64 × 66  142 cm

4 lb 14 oz

2.2 kg

26”

66 cm

55 7/8”

142 cm

13

25”(64 cm)

26 55 7/8”

(66 –142 cm)

(maximum weight; weight may vary depending on how many tubes are used)

HAVING TROUBLE?

LET US HELP YOU!

BEFORE RETURNING

YOUR PRODUCT

CALL US;

WE CAN HELP

If you have questions regarding your product or require

warranty assistance, please call our customer service helpline.

TOLL-FREE:

1-888-670-6684

ASSEMBLY TROUBLESHOOTING

PRODUCT TROUBLESHOOTING

PROBLEM POSSIBLE CAUSES SOLUTION

CARING FOR YOUR ITEM

1

2

3

Make sure the power

supply is on.

The power supply is off.

Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Use a dry or slightly dampened clean cloth and wipe the exterior surface of the

fixture.

To clean the interior of the fixture, disconnect the power to the fixture by turning off

the circuit breaker or by removing the fuse at the fuse box, and then use a slightly

dampened clean cloth to wipe the interior surface of the fixture.

GLENTHORNE

The light will not turn on.

Check the wire

connections.

The fixture is wired

incorrectly.

Replace the light bulb.The light bulb is dead.

Test or replace the

switch.

The switch is faulty.

Check the wiring.The fixture is wired

incorrectly.

The fuse blows or the

circuit breaker trips when

the light is turned on.

14

1-YEAR LIMITED WARRANTY*

This CANVAS™ product carries a one (1) year warranty against defects in workmanship and

materials. Trileaf Distribution agrees to replace the defective product free of charge within the

stated warranty period, when returned by the original purchaser with proof of purchase. This

product is not guaranteed against wear or breakage due to misuse and/or abuse.

Made in China

Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

PRODUCT NO.

WARRANTY INFORMATION

152-2645-2

GLENTHORNE 15

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT:Pleasereadthismanualcarefully

beforebeginningassemblyofthisproduct.

Keepthismanualforfuturereference.

PRODUCT NO.

INSTRUCTIONS D’ASSEMBLAGE

DES DIFFICULTÉS?

NUMÉRO SANS FRAIS :

1-888 670-6684

IMPORTANT: Veuillez lire attentivement ce manuel

avant de commencer l’assemblage de ce produit.

Conservez ce guide aux fins de consultation ultérieure.

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT:Pleasereadthismanualcarefully

beforebeginningassemblyofthisproduct.

Keepthismanualforfuturereference.

PRODUCT NO.

Nº DE MODÈLE :

LUSTRE À 6 LUMIÈRES

152-2645-2

GLENTHORNE

Nous croyons au pouvoir de la décoration

et à sa capacité de façonner votre maison.

C’est pourquoi nous nous inspirons des

gens du pays et de leur mode de vie pour

concevoir la collection de CANVASMC.

Qu’il s’agisse de meubles tendance, de

décorations pour les fêtes ou pour le plein air,

CANVASMC vous permet de rafraîchir

facilement votre espace pour qu’il reflète

votre style unique et votre mode de vie.

Nous serions ravis de connaître votre opinion

et nous vous invitons à nous faire part de vos

commentaires. Visitez notre site Web à

l’adresse canadiantire.ca pour nous faire part

de votre expérience et partagez vos photos

en utilisant le mot-clic #MonStyleCANVAS.

Montrez-nous comment vous donnez vie aux

articles CANVASMC. Nous avons hâte de les

voir!

AVERTISSEMENT! CONSULTEZ UN ÉLECTRICIEN QUALIFIÉ POUR

DÉTERMINER SI VOUS AVEZ LE BON CONDUCTEUR DE CIRCUIT

DE DÉRIVATION.

TABLE DES MATIÈRES

NETTOYAGE : Avant de nettoyer votre luminaire, mettez l’interrupteur en position

d’arrêt ou coupez la source d’alimentation.

Essuyez le lampadaire avec un chiffon doux et humide.

IMPORTANT : CONSERVEZ CE GUIDE AUX FINS DE CONSULTATION

ULTÉRIEURE, ET LISEZ-LE ATTENTIVEMENT.

OUTILS REQUIS

LISEZ LES INSTRUCTIONS ET EXAMINEZ TOUS LES SCHÉMAS

AVANT D’INSTALLER LE LUMINAIRE. INSTRUCTIONS GÉNÉRALES :

1. Tous les raccordements électriques doivent être conformes aux

normes et règlements locaux et au Code canadien de l’électricité.

2. Ces luminaires doivent être installés sur une boîte de sortie électrique. La boîte

de sortie doit être directement soutenue par la structure du bâtiment.

3. Éteignez le disjoncteur ou retirez le fusible approprié pour déconnecter la

source d’alimentation avant d’installer le luminaire.

4. Mettre l’interrupteur de lumière en position d’arrêt pour couper l’alimentation

n’est pas suffisant pour éviter un choc électrique. En cas de doute sur la sécurité

d’une installation ou d’une réparation électrique, consultez un électricien qualifié.

Outils requis 19

Liste des pièces 20

Liste du matériel 21

Vue éclatée 22

Avant de commencer l’assemblage 23

Installation électrique 24

Guide étape par étape 25

Fiche technique 29

Problèmes lors de l’assemblage 30

Dépannage 30

Entretien de votre article 30

Garantie 31

19GLENTHORNE

Tournevis à tête

cruciforme nº 2

Coupe

-fils

Pince à

dénuder

Tournevis à

tête plate

Escabeau

Lunettes de

sécurité

Ruban

isolant

RÉFÉRENCE DESCRIPTION ILLUSTRATION QUANTITÉ

1

3

5

2

4

LISTE DES PIÈCES

Socle 1

Tube long 2

Corps principal du

luminaire 1

Tube court 2

Tube de milieu 1

20 GLENTHORNE

La page charge ...

Canvas Glenthorne 6-Light Le manuel du propriétaire

Canvas Glenthorne 6-Light Le manuel du propriétaire

Documents connexes

Autres documents