Jenn-Air JES1450FB Mode d'emploi

Marque: Jenn-Air

Modèle: JES1450FB

Catégorie: Cuisinières

Taper: Mode d'emploi

User Guide

Electric Range

THANK YOU for purchasing this high-quality product. Register your range at www.jennair.com. In Canada, register your range

at www.jennair.ca.

For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the

oven frame behind the top right side of the oven door.

Model Number______________________________________________ Serial Number_______________________________________________

Para una versión de estas instrucciones en español, visite www.jennair.com.

Deberá tener a mano el número de modelo y de serie, que están ubicados en el marco del horno, detrás del lado derecho superior de la

puerta del horno.

Table of Contents

W10896664A

RANGE SAFETY .............................................................................2

The Anti-Tip Bracket ....................................................................2

KEY USAGE TIPS ...........................................................................4

AquaLift

Self-Cleaning Technology ............................................4

Surface Temperatures ..................................................................4

Preheating ....................................................................................4

Ceramic Glass Cooktop Cleaning ...............................................4

FEATURE GUIDE ............................................................................5

Electronic Oven Controls .............................................................7

COOKTOP .......................................................................................9

Cookware ...................................................................................11

Home Canning ...........................................................................11

OVEN .............................................................................................12

Aluminum Foil .............................................................................12

Positioning Racks and Bakeware ..............................................12

Roll-Out Rack .............................................................................13

Oven Vent ...................................................................................14

Sabbath Mode............................................................................14

Baking and Roasting ..................................................................14

Broiling........................................................................................14

Convection Cooking ..................................................................15

Prooﬁng Bread ...........................................................................15

Favorite .......................................................................................15

Cook Time ..................................................................................16

Baking Drawer ............................................................................16

Oven Light ..................................................................................16

RANGE CARE ...............................................................................17

Clean Cycle ................................................................................17

General Cleaning ........................................................................18

Remove/Replace Drawer ...........................................................19

TROUBLESHOOTING ..................................................................20

ACCESSORIES .............................................................................22

WARRANTY ..................................................................................23

Range Safety

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having

the anti-tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

WARNING

Anti-Tip

Bracket

Range Foot

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the range, follow

basic precautions, including the following:

■ WARNING:

TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY

PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE

RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR OR WALL, AND

SLIDE RANGE BACK SO REAR RANGE FOOT IS

UNDER ANTI-TIP BRACKET.

■ CAUTION: Do not store items of interest to children in

cabinets above a range or on the backguard of a range –

children climbing on the range to reach items could be

seriously injured.

■ Proper Installation – Be sure the range is properly installed

and grounded by a qualified technician.

■ Never Use the Range for Warming or Heating the Room.

■ Do Not Leave Children Alone – Children should not be left

alone or unattended in area where the range is in use.

They should never be allowed to sit or stand on any part of

the range.

■

Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the range.

■

User Servicing – Do not repair or replace any part of the

range unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

■ Storage in or on the Range – Flammable materials should

not be stored in an oven or near surface units.

■ Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

■ DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS – Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not touch,

or let clothing or other flammable materials contact surface

units or areas near units until they have had sufficient time

to cool. Among those areas are the cooktop and surfaces

facing the cooktop.

■ Use Proper Pan Size – The range is equipped with one or

more surface units of different size. Select utensils having

flat bottoms large enough to cover the surface unit heating

element. The use of undersized utensils will expose a

portion of the heating element to direct contact and may

result in ignition of clothing. Proper relationship of utensil to

burner will also improve efficiency.

■ Never Leave Surface Units Unattended at High Heat

Settings – Boilover causes smoking and greasy spillovers

that may ignite.

■ Make Sure Reflector Pans or Drip Bowls Are in Place –

Absence of these pans or bowls during cooking may

subject wiring or components underneath to damage.

■ Protective Liners – Do not use aluminum foil to line surface

unit drip bowls or oven bottoms, except as suggested in

the manual. Improper installation of these liners may result

in a risk of electric shock, or fire.

■

Glazed Cooking Utensils – Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for range-top service without breaking

due to the sudden change in temperature.

■ Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units – To reduce the risk of burns,

ignition of flammable materials, and spillage due to

unintentional contact with the utensil, the handle of a

utensil should be positioned so that it is turned inward, and

does not extend over adjacent surface units.

■ Do Not Soak Removable Heating Elements – Heating

elements should never be immersed in water.

■ Do Not Cook on Broken Cooktop – If cooktop should

break, cleaning solutions and spillovers may penetrate the

broken cooktop and create a risk of electric shock. Contact

a qualified technician immediately.

■ Clean Cooktop With Caution – If a wet sponge or cloth is

used to wipe spills on a hot cooking area, be careful to

avoid steam burn. Some cleaners can produce noxious

fumes if applied to a hot surface.

■

Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

■

Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

■ Keep Oven Vent Ducts Unobstructed.

■ Placement of Oven Racks – Always place oven racks in

desired location while oven is

cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

■

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot even

though they are dark in color. Interior surfaces of an oven

become hot enough to cause burns. During and after use,

do not touch, or let clothing or other flammable materials

contact heating elements or interior surfaces of oven until

they have had sufficient time to cool. Other surfaces of the

appliance may become hot enough to cause burns – among

these surfaces are oven vent openings and surfaces near

these openings, oven doors, and windows of oven doors.

For self-cleaning ranges –

■ Do Not Clean Door Gasket – The door gasket is essential

for a good seal. Care should be taken not to rub, damage,

or move the gasket.

■ Do Not Use Oven Cleaners – No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

■ Clean Only Parts Listed in Manual.

■ Before Self-Cleaning the Oven – Remove broiler pan and

other utensils.

For units with ventilating hood –

■ Clean Ventilating Hoods Frequently – Grease should not

be allowed to accumulate on hood or filter.

■ When flambeing foods under the hood, turn the fan on.

Key Usage Tips

AquaLift

Self-Cleaning Technology

AquaLift

Self-Cleaning Technology is a ﬁrst-of-its-kind cleaning

solution designed to minimize the time, temperature, and odors

that ordinarily come with traditional self-cleaning methods. With

AquaLift

Self-Cleaning Technology, an exclusive coating on the

interior of the oven is activated with heat and water to release

baked-on soil. To use AquaLift

Self-Cleaning Technology, simply

wipe out loose debris, pour water into the oven bottom, and run

the AquaLift

Self-Cleaning cycle. When the cycle ﬁnishes in under

1 hour at a lower temperature than in traditional self-cleaning

methods, just wipe out the remaining water and loose debris.

See the “Clean Cycle” section for more detailed instructions. For

additional information, frequently asked questions, and videos

on using AquaLift

Self-Cleaning Technology, visit our website at

http://whirlpoolcorp.com/aqualift.

Surface Temperatures

When the range is in use, all range surfaces may become hot,

such as the knobs and oven door.

Baking Drawer

When the oven is in use, the drawer may become hot. Do not store

plastics, cloth, or other items that could melt or burn in the drawer.

Oven Vent

The oven vent releases hot air and moisture from the oven and

should not be blocked or covered. Do not set plastics, paper, or

other items that could melt or burn near the oven vent.

Preheating

When beginning a Bake, Convect Bake, or Convect Roast cycle,

the oven will begin preheating after Start is pressed. The oven

will take approximately 12 to 15 minutes to reach 350°F (177°C)

with all of the oven racks provided with your oven inside the

oven cavity. Higher temperatures will take longer to preheat. The

preheat cycle rapidly increases the oven temperature. The actual

oven temperature will go above your set temperature to offset

the heat lost when your oven door is opened to insert food. This

ensures that when you place your food in the oven, the oven

will begin at the proper temperature. Insert your food when the

preheat tone sounds. Do not open the door during preheat before

the tone sounds.

Ceramic Glass Cooktop Cleaning

To avoid damaging the cooktop, do not use steel wool, abrasive

powder cleansers, chlorine bleach, rust remover, or ammonia.

1. Remove food/residue with the Cooktop Scraper.

■ For best results, use the Cooktop Scraper while the

cooktop is still warm but not hot to the touch. It is

recommended to wear an oven mitt while scraping the

warm cooktop.

■ Hold the Cooktop Scraper at approximately a 45° angle

against the glass surface and scrape the residue. It will

be necessary to apply pressure in order to remove the

residue.

Allow the cooktop to cool down completely before proceeding

to Step 2.

2. Apply a few dime-sized drops of affresh

Cooktop Cleaner to

the affected areas.

■ Rub affresh

Cooktop Cleaner onto the cooktop surface

with the blue Cooktop Cleaning Pad. Some pressure is

needed to remove stubborn stains.

■ Allow the cleaner to dry to a white haze before proceeding

to Step 3.

3. Polish with a clean, dry cloth or a clean, dry paper towel.

■ Repeat steps 1 through 3 as necessary for stubborn or

burned-on stains.

The Complete Cooktop Cleaner Kit is available for order including

the following:

■ Cooktop Scraper

■ affresh

Cooktop Cleaner

■ Blue Cooktop Cleaning Pads

See the “Accessories” section for part numbers and information

on ordering.

Feature Guide

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked

Questions (FAQs) section of our website at www.jennair.com for more detailed instructions. In Canada, refer to the Customer Service

Section at www.jennair.ca.

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or

after cooking.

Doing so can result in food poisoning or sickness.

Keypad Feature Instructions

OPTIONS/CLOCK Clock

The Clock can use a 12- or 24-hour cycle. See the “Electronic Oven Controls” section.

1. Press OPTIONS/CLOCK until “CLOCK” is displayed.

2. Use the number keypads to set the time of day.

3. Press START to change the time.

4. Press “3” for AM or “6” for PM.

OPTIONS/CLOCK Settings

Enables you to personalize the audible tones and oven operation to suit your needs. See the

“Electronic Oven Controls” section.

LIGHT Oven cavity

light

The oven light is controlled by a keypad on the oven control panel. While the oven door is

closed, press LIGHT to turn the light on and off. When the oven door is opened, the oven

light will automatically come on.

TIMER SET/OFF Oven timer

The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

1. Press TIMER SET/OFF.

2. Press the number keypads to set the length of time in hr-min-min. Leading zeros do not

have to be entered. For example, for 2 minutes, enter “2.”

3. Press TIMER SET/OFF to begin the countdown. If enabled, end-of-cycle tones will

sound at end of countdown.

4. Press TIMER SET/OFF again to cancel the Timer and return to the time of day. Do not

press CANCEL because the oven will turn off.

5. If the Timer is running but not in the display, press TIMER SET/OFF to display the

countdown for 5 seconds.

START Cooking start

The Start keypad begins any oven function. If Start is not pressed within 2 minutes after

pressing a keypad, the function is canceled and the time of day is displayed.

CANCEL UPPER

CANCEL LOWER

Range function

The Cancel keypads stop any function for the appropriate oven, except the Clock and Timer.

BAKE

(upper and lower

oven)

Baking and

roasting

1. Press BAKE for the desired oven.

2. Set the desired temperature between 170°F and 500°F (75°C and 260°C) for the

upper oven or 170°F and 451°F (75°C and 233°C) for the lower oven using the number

keypads. The default temperature is 350°F (180°C).

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL for the desired oven when ﬁnished.

BROIL Broiling

1. Press BROIL.

2. Press the number keypads to set the desired temperature.

3. Press START and allow the oven to preheat for 2 minutes.

4. To change the temperature, repeat steps 2 and 3.

5. Position the cookware in the oven, and then close the door.

6. Press CANCEL UPPER when ﬁnished.

Keypad Feature Instructions

MANUAL CONVECT

MODES

Convection

cooking

1. Press MANUAL CONVECT MODES until the desired convection mode appears in the

display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. Insert food when prompted.

6. To change the temperature, repeat steps 3 and 4.

7. Press CANCEL UPPER when ﬁnished.

AUTO CONVECT

MODES

Convection

cooking

1. Press AUTO CONVECT MODES until the desired convection mode appears in the

display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. Press the number keypads to set the desired cook time.

6. Press START.

7. Insert food when prompted.

8. To change the temperature, repeat steps 3 through 6.

9. Press CANCEL UPPER when ﬁnished.

KEEP WARM

(upper and lower

oven)

Hold warm

Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM for the desired oven.

2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using the

number keypads. The default temperature is 170°F (75°C).

3. Press START.

4. Press CANCEL for the desired oven when ﬁnished.

WARM ZONE

ON/OFF

Warming zone

Press COOKTOP WARM ZONE ON/OFF to select the warming element on the cooktop, and

then press CONFIRM.

Press COOKTOP WARM ZONE ON/OFF to turn off the warming element.

PROOF Prooﬁng bread

1. Place prepared dough in oven. Press PROOF.

2. Press START.

3. Let the dough rise until nearly doubled in size. Prooﬁng time may vary depending on

dough type and quantity.

4. Press CANCEL UPPER when ﬁnished prooﬁng.

Refer to the “Prooﬁng Bread” section for more information.

FAVORITE Saved favorite

The Favorite keypad stores the oven mode, cook time, and temperature for your favorite

recipe. To save or use favorite, see the “Favorite” section.

DELAY START Delayed start

The Delay Start keypad is used to enter the starting time for an oven function with a delayed

start. Delay Start should not be used for foods such as breads and cakes because they may

not bake properly.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

COOK TIME Timed cooking

Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set

length of time, and/or shut off automatically.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

AQUALIFT SELF

CLEAN

Clean cycle

See the “Clean Cycle” section.

START

(hold 3 sec to lock)

Oven control

lockout

1. Check that the oven is OFF.

2. Press and hold START (hold 3 sec to lock) for 3 seconds.

3. A tone will sound, and “Control Locked” will scroll, and then “Locked” will be displayed.

4. Repeat to unlock. No keypads will function with the controls locked. The cooktop

functions are not affected by the oven control lockout.

Keypad Feature Instructions

OPTIONS/CLOCK Energy save

1. Press OPTIONS/CLOCK until “ENERGY SAVER” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

If Energy Save is ON, the range will go into Sleep mode after 5 minutes of inactivity.

Any keypad press will activate the display. If Energy Save is OFF, the display will be

on at all times.

Electronic Oven Controls

Control Display

The display will ﬂash when powered up or after a power loss.

Press CANCEL UPPER to clear. When the oven is not in use, the

time of day is displayed. If the range is in Energy Save mode, the

display will be blank when not in use.

Tones

Tones are audible signals, indicating the following:

One Tone

■ Valid keypad press

■ Oven is preheated (long tone).

■ Function has been entered.

■ Reminder, repeating each minute after the end-of-cycle tones

Three Tones

■ Invalid keypad press

Four Tones

■ End-of-cycle

Use the Options/Clock keypad to change the tone settings.

Energy Save

The Energy Save mode puts the range into Sleep mode and

reduces energy consumption.

To Activate the Energy Save Mode:

1. Press OPTIONS/CLOCK until “ENERGY SAVER” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

5. The setting will be activated after 5 minutes.

To Deactivate the Energy Save Mode:

1. Press OPTIONS/CLOCK until “ENERGY SAVER” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

5. The clock will reappear in the display, and the range can be

operated as usual.

Settings

Many features of the oven control can be adjusted to meet your

personal needs. These changes are made using the Options/

Clock keypad.

Use the Options/Clock keypad to scroll through the features that

can be changed. Each press of the Options/Clock keypad will

advance the display to the next setting. After selecting the feature

to be changed, the control will prompt you for the required input.

Then press START or CANCEL UPPER to exit and display the time

of day. Details of all of the feature changes are explained in the

following sections.

Press CANCEL UPPER to exit Settings.

Clock

The Clock can use a 12- or 24-hour cycle.

1. Press OPTIONS/CLOCK until “CLOCK” is displayed.

2. Use the number keypads to set the time of day.

3. Press START to change the time.

4. Press “3” for AM or “6” for PM.

Fahrenheit and Celsius

The temperature is preset to Fahrenheit but can be changed to

Celsius.

1. Press OPTIONS/CLOCK until “TEMP UNIT” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Audible Tones Disable

Turns off all tones, including the end-of-cycle tone and keypress

tones. Reminder tones are still active when all tones are disabled.

1. Press OPTIONS/CLOCK until “SOUND” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Sound Volume

Sets the volume of the tone to either high or low.

1. Press OPTIONS/CLOCK until “SOUND VOLUME” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

End-of-Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1. Press OPTIONS/CLOCK until “END TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Keypress Tones

Activates or turns off the tones when a keypad is pressed.

1. Press OPTIONS/CLOCK until “KEYPRESS TONE” is

displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

12-Hour Shutoff

The oven control is set to automatically shut off the oven 12 hours

after the oven initiates a cook or clean function. This will not

interfere with any timed or delay cook functions.

1. Press OPTIONS/CLOCK until “12Hr AUTO_OFF” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Languages - Scrolling Display Text

Language options are English, Spanish, and French.

1. Press OPTIONS/CLOCK until “LANGUAGE” is displayed.

2. The current setting will be displayed.

3. Press the “1” or “2” keypad to select the desired language.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Oven Temperature Offset Control

IMPORTANT: Do not use a thermometer to measure oven

temperature. Elements will cycle on and off as needed to provide

consistent temperature but may run slightly hot or cool at any

point in time due to this cycling. Most thermometers are slow

to react to temperature change and will not provide an accurate

reading due to this cycling.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature can

be adjusted to personalize it for your cooking needs. It can be

changed to Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press OPTIONS/CLOCK until “TEMP CALIB” is displayed.

2. On some models, press “1” to adjust the drawer temperature

calibration. Press START, wait 10 seconds for the display to

change, and then continue with Step 3.

Press START to adjust the oven temperature calibration. Wait

10 seconds for the display to change, and then continue with

Step 3.

3. Press the “3” keypad to increase the temperature in 5°F

(3°C) increments or press the “6” keypad to decrease the

temperature in 5°F (3°C) increments. The offset range is from

-30°F to +30°F (-18°C to +18°C).

4. Press START or CANCEL UPPER to exit and display the time

of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute after

the end-of-cycle tones.

1. Press OPTIONS/CLOCK until “REMINDER TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

12/24 Hour Clock

1. Press OPTIONS/CLOCK until “12/24 HOUR” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Demo Mode

IMPORTANT: This feature is intended for use on the sales ﬂoor

with 120 V power connection and permits the control features

to be demonstrated without the oven turning on. If this feature is

activated, the oven will not work.

1. Press OPTIONS/CLOCK until “DEMO MODE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Sabbath Mode

The Sabbath mode sets the oven to remain on in a Bake setting

until turned off.

When the Sabbath mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not

turn on or off and the heating elements will not turn on or off

immediately.

To Enable Sabbath Mode Capability (One Time Only):

1. Press OPTIONS/CLOCK until “SABBATH” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Cooktop

The control knobs can be set to anywhere between Hi and Lo.

Push in and turn to setting.

Ceramic Glass

The surface cooking area will glow red when an element is ON.

Some parts of the surface cooking area may not glow red when an

element is ON. This is normal operation. It will also randomly cycle

off and back on again, even while on Hi, to keep the cooktop from

extreme temperatures.

It is normal for the surface of light colored ceramic glass to appear

to change color when surface cooking areas are hot. As the glass

cools, it will return to its original color.

Clean the cooktop after each use to help avoid scratches, pitting,

abrasions and to condition the glass surface. Ceramic glass

cooktop cleaner and a cooktop scraper are also recommended

for stubborn soils. Do not use abrasive cleaners, cleaning pads

or harsh chemicals for cleaning. The Cooktop Care Kit contains

all of the items needed to clean and condition your ceramic

glass cooktop. Refer to the “Range Care” section for additional

information.

IMPORTANT: To avoid permanent damage to the cooktop surface

and to make soils easier to remove, clean the cooktop after each

use to remove all soils.

■ Avoid storing jars or cans above the cooktop. Dropping

a heavy or hard object onto the cooktop could crack the

cooktop.

■ To avoid damage to the cooktop, do not leave a hot lid on

the cooktop. As the cooktop cools, air can become trapped

between the lid and the cooktop and the ceramic glass could

break when the lid is removed.

■ For foods containing sugar in any form, clean up all spills and

soils as soon as possible. Allow the cooktop to cool down

slightly. Then, while wearing oven mitts, remove the spills

using a scraper while the surface is still warm. If sugary spills

are allowed to cool down, they can adhere to the cooktop and

can cause pitting and permanent marks.

■ To avoid scratches, do not slide cookware or bakeware across

the cooktop. Aluminum or copper bottoms and rough ﬁnishes

on cookware or bakeware could leave scratches or marks on

the cooktop.

■ Do not cook popcorn in prepackaged aluminum containers on

the cooktop. They could leave aluminum marks that cannot be

removed completely.

■ To avoid damage to the cooktop, do not allow objects that

could melt, such as plastic or aluminum foil, to touch any part

of the entire cooktop.

■ To avoid damage to the cooktop, do not use the cooktop as a

cutting board.

WARNING

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

REMEMBER: When range is in use, the entire cooktop area

may become hot.

■ Use cookware about the same size as the surface cooking

area. Cookware should not extend more than ½" (1.3 cm)

outside the area.

■ Use ﬂat-bottomed cookware for best heat conduction and

energy efﬁciency. Cookware with rounded, warped, ribbed,

or dented bottoms could cause uneven heating and poor

cooking results.

■ Determine ﬂatness by placing the straight edge of a ruler

across the bottom of the cookware. While you rotate the

ruler, no space or light should be visible between it and the

cookware.

■ Cookware designed with slightly indented bottoms or small

expansion channels can be used.

■ Make sure the bottoms of pots and pans are clean and dry

before using them. Residue and water can leave deposits

when heated.

■ To avoid damage to the cooktop, do not cook foods directly

on the cooktop.

Cooktop On Indicator Light

The Cooktop On indicator light is located on the console panel.

When any control knob on the console panel is turned on, the

Cooktop On indicator light will glow.

Hot Surface Indicator Light

On ceramic glass models, the Hot Surface indicator light is located

on the console panel.

The Hot Surface indicator light will glow as long as any surface

cooking area is too hot to touch, even after the surface cooking

area is turned off.

Triple Zone Cooking Element

The Triple Zone cooking element offers ﬂexibility depending on the

size of the cookware. Single size can be used in the same way as

a regular element. The dual and triple sizes combine the single,

dual, and outer element and is recommended for larger cookware,

larger quantities of food and home canning.

Rapid Boil Element (Right Front Element)

The Rapid Boil cooking element offers additional cooking ﬂexibility.

The Rapid Boil cooking element can be used to boil liquids faster.

The lowest melt setting can be used to prepare sauces, brown or

saute foods, and keep foods at a low temperature. Use cookware

appropriate in size for the Rapid Boil cooking element.

Melt Element (Left Rear Element)

The Melt cooking element offers ﬂexibility due to a wide range of

settings between Hi and Melt. The Hi heat option can be used to

boil small amounts of liquid quickly. To reduce the power setting,

turn the knob clockwise. The Melt setting is designed for delicate

foods that require low heat, such as when melting chocolate or

holding sauces. Use cookware appropriate in size for the Melt

cooking element.

A. Surface cooking area

B. Cookware/canner

C. ½" (1.3 cm) maximum overhang

A. Rapid boil option

B. Lower heat option

A. High heat option

B. Melt option

A Triple

B. Dual

C. Single

Warm Zone Element

Use the Cooktop Warm Zone element to keep cooked foods

warm. One hour is the recommended maximum time to maintain

food quality.

Do not use it to heat cold foods.

The Warm Zone element can be used alone or when any of the

other surface cooking areas are being used.

The Warm Zone element area will not glow red when cycling

on. However, the Cooktop On indicator light will glow while the

Cooktop Warm Zone element is in use.

■ Use only cookware recommended for oven and cooktop use.

■ Cover all foods with a lid or aluminum foil. When warming

baked goods, allow a small opening in the cover for moisture

to escape.

■ To avoid damage to the cooktop, do not use plastic wrap to

cover food because the plastic wrap may melt.

■ Use pot holders or oven mitts to remove food.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

To Use:

1. To turn on, press COOKTOP WARM ZONE ON/OFF and then

CONFIRM.

2. To turn off, press COOKTOP WARM ZONE ON/OFF.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element, or surface burner.

Ideal cookware should have a ﬂat bottom, straight sides, and a

well-ﬁtting lid, and the material should be of medium-to-heavy

thickness.

Rough ﬁnishes may scratch the cooktop. Aluminum and copper

may be used as a core or base in cookware. However, when used

as a base, they can leave permanent marks on the surfaces.

Cookware material is a factor in how quickly and evenly heat is

transferred which affects cooking results. A nonstick ﬁnish has the

same characteristics as its base material. For example, aluminum

cookware with a nonstick ﬁnish will take on the properties of

aluminum.

Cookware with nonstick surfaces should not be used under the

broiler.

Check for ﬂatness by placing the straight edge of a ruler across

the bottom of the cookware. While you rotate the ruler, no space

or light should be visible between it and the cookware.

Use the following chart as a guide for cookware material

characteristics.

Cookware Characteristics

Aluminum

■ Heats quickly and evenly.

■ Suitable for all types of cooking

■ Medium or heavy thickness is best for

most cooking tasks.

■ May leave aluminum residues

which may be diminished if cleaned

immediately after cooking.

Cast iron

■ Heats slowly and evenly.

■ Good for browning and frying

■ Maintains heat for slow cooking.

■ Rough edges or burrs may scratch

the cooktop.

Ceramic or

ceramic glass

■ Follow manufacturer’s instructions.

■ Heats slowly, but unevenly.

■ Ideal results on low to medium heat

settings

■ May scratch the cooktop.

Cookware Characteristics

Copper

■ Heats very quickly and evenly.

■ May leave copper residues which may

be diminished if cleaned immediately

after cooking.

■ Can leave a permanent stain or bond

to the cooktop if overheated.

Earthenware

■ Follow manufacturer’s instructions.

■ Use on low heat settings.

■ May scratch the cooktop.

Porcelain

enamel-on-steel

or cast iron

■ See stainless steel or cast iron.

■ Porcelain enamel bakeware without the

metal base may bond to the cooktop if

overheated.

Stainless steel

■ Heats quickly, but unevenly.

■ A core or base of aluminum or copper

on stainless steel provides even

heating.

Use ﬂat-bottomed cookware for best cooking results and energy

efﬁciency. The cookware should be about the same size as the

cooking area outlined on the cooktop. Cookware should not

extend more than ½" (1.3 cm) outside the area.

Home Canning

Canning can be performed on a glass smoothtop cooking surface

or traditional coil element cooktop. When canning for long periods,

alternate the use of surface cooking areas or elements between

batches. This allows time for the most-recently used areas to cool.

■ Center the canner on the largest surface cooking area or

element. On electric cooktops, canners should not extend

more than ½" (1.3 cm) beyond the surface cooking area or

element.

■ Do not place canner on 2 surface cooking areas or elements

at the same time.

■ On ceramic glass models, use only ﬂat-bottomed canners to

avoid damage to the cooktop and elements.

■ For more information, contact your local agricultural

extension ofﬁce or refer to published home canning guides.

Companies that manufacture home canning products can

also offer assistance.

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

2 0

Oven

Odors and smoke are normal when the oven is used the ﬁrst few

times or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to

the fumes given off by the oven. Exposure to the fumes may result

in death to certain birds. Always move birds to another closed and

well-ventilated room.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

ﬁnish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain

ﬁnish, do not place food or bakeware directly on the oven door

or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure

that no bakeware piece is directly over another.

Racks

■ Position racks before turning on the oven.

■ Do not position racks with bakeware on them.

■ Make sure racks are level.

To position a rack, pull it out to the stop position, raise the front

edge, and then lift out. Use the following illustration and charts

as guides.

The oven has 7 positions for a ﬂat rack as shown in the previous

illustration and the following table.

Flat Rack Position* Type of Food

7 Broiling/searing meats, hamburgers,

steaks

6 Broiled meats, poultry, ﬁsh

3 or 4 Most baked goods, casseroles,

frozen foods

2 Roasted meats

1 Large roasts or poultry

For hamburger patties to have a well-seared exterior and a rare

interior, use a ﬂat rack in rack position 7. Side 1 should cook

for approximately 2½ to 3½ minutes. Side 2 should cook for

approximately 4 to 5 minutes. Expect a moderate degree of smoke

when broiling.

*If your model has a Max Capacity Oven Rack, the recessed ends

must be placed in the rack position above the desired position of

the food. See the following illustration.

IMPORTANT: These rack positions are for ﬂat racks. If a Max

Capacity Oven Rack is used, the rack position must be adjusted

as shown in the previous ﬁgure.

Multiple Rack Cooking

2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.

2-rack (convection): Use rack positions 2 and 5 or 3 and 6.

3-rack (convection): Use rack positions 2 and 7 and a Max

Capacity Oven Rack in rack position 5.

Baking Cookies and Layer Cakes on 2 Racks

Baking Layer Cakes

For best results when baking cakes on 2 racks, use the Bake

function, a ﬂat rack in rack position 3, and a roll-out rack in rack

position 5. Place the cakes on the racks as shown. Keep at least

3" (7.6 cm) of space between the front of the racks and the

front cakes.

Baking Cookies

For best results when baking cookies on 2 racks, use the

Convection Bake function, a ﬂat rack in rack position 3,

and a roll-out rack in rack position 5.

A. Ends of rack in position 3

B. Food in position 2

Roll-Out Rack

The roll-out rack allows easy access to position and remove food

in the oven. It is not recommended to use the roll-out rack in the

top rack, position 7, or the bottom rack, position 1.

Open Position

Closed and Engaged Position

To Insert Roll-Out Rack

1. Angle the front of the rack assembly up, and then insert

the rack frame into the “V” cutout in the rack guides of the

oven cavity.

2. Keep rack assembly lifted up at an angle, and then push

in to bypass the lower “V” cutout.

A. Rack frame

B. Sliding rack

A. Rack frame

B. Sliding rack

A. “V” cutout

B. Rack guides

3. Lower the front of the rack assembly, and then gently slide

rack assembly into oven, bypassing the “V” cutouts. Push the

rack assembly into the oven until it stops at the ladder in the

back of the oven.

4. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly, and then push the

rack assembly to the back of the oven. Lower the front of the

rack assembly so the ladder hook engages with the ladder on

both sides of the oven.

To Remove Roll-Out Rack

1. Push the sliding rack in completely so that it is in the closed

and engaged position.

2. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly to disengage the

ladder hook from the ladders at the rear of the oven, and then

pull the rack assembly forward.

3. Using 2 hands, gently pull the sliding rack and the rack frame

at the same time to the “V” cutout. Angle the rack so that the

front is higher than the back, and then gently pull rack past “V”

cutout and then out of the oven.

To avoid damage to the sliding rack, do not place more than 25 lbs

(11.4 kg) on the rack.

Do not clean the roll-out rack in a dishwasher. It may remove the

rack’s lubricant and affect its ability to slide.

See the “General Cleaning” section for more information.

A. “V” cutout

B. Rack guides

C. Ladder hook

D. Ladder

A. Sliding rack

B. Front crossbar

Oven Vent

The oven vent releases hot air and moisture from the oven and

should not be blocked or covered. Blocking or covering the vent

will cause poor air circulation, affecting cooking and cleaning

results. Do not set plastics, paper, or other items that could melt

or burn near the oven vent.

Sabbath Mode

The Sabbath mode sets the oven to remain on in a Bake setting

until turned off.

When the Sabbath mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not

turn on or off and the heating elements will not turn on or off

immediately.

To Enable Sabbath Mode Capability (One Time Only):

1. Press OPTIONS/CLOCK until “SABBATH” is displayed. “OFF.

Press (1) for On” will scroll in the display.

2. Press the “1” keypad. “ON. Press (1) for Off” will scroll in the

display. Sabbath mode can be activated for baking.

3. Press START or CANCEL UPPER to exit and display the time

of day.

NOTE: To disable the Sabbath mode, repeat steps 1 through 3

to change the status from “SABBATH ON” to “SABBATH OFF.”

To Activate Sabbath Mode:

1. Press BAKE for the desired oven.

2. Press the number keypad to set a temperature other than

350°F (177°C).

3. Press START.

For timed cooking in Sabbath mode, press COOK TIME, and

then the number keypads to set the desired cook time.

4. Press OPTIONS/CLOCK. Three tones will sound. Then press

“7.” “SAb” will appear in the display.

To Adjust Temperature (When Sabbath Mode Is Running):

1. Press the number keypad as instructed by the scrolling text

to select the new temperature.

NOTE: The temperature adjustment will not appear on the

display. The scrolling text will be shown on the display as it

was before the keypad was pressed.

2. Press START.

To Deactivate Sabbath Mode:

Press OPTIONS/CLOCK, and then press “7” to return to regular

baking, or press CANCEL for the desired oven to turn off the

range.

NOTE: No tones will sound while deactivating Sabbath mode.

A. Oven vent

Baking and Roasting