Samsung WF409ANW Manuel utilisateur

Washer

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

WF409*

This manual is made with 100% recycled paper.

WF409SNL-02657C-03_EN.indd 1WF409SNL-02657C-03_EN.indd 1 2011-06-22 ¿ÀÈÄ 4:17:262011-06-22 ¿ÀÈÄ 4:17:26

2_ features of your new VRT™ washer

features of your new VRT™

washer

1. VRT™ (Vibration Reduction Technology)

This Samsung washer performs smoothly at top spin speeds, minimizing noise and

vibration.

2. Super capacity

Samsung’s extra-large capacity laundry machine can wash a full set of your bedding, a king-

size comforter, or up to 26 bath towels in a single load. Since you don’t have to do as many

loads, you save time, money, water and energy.

3. Diamond drum™

Take gentle care of your fabrics. With inside holes 36% smaller than those of conventional

drums, the diamond drum prevents fabrics from sticking out and consequently being

damaged.

4. Stylish design

The stylish design of this washer blends well with your environment.

5. Digital display & Center jog dial

The jog dial enables you to select cycles in both directions with ease, and the display is easy

to use and understand.

6. DD(Direct-drive) Motor

The power to handle anything! Our direct-drive inverter motor delivers power right to the

washer drum from a variable speed, reversible motor. A beltless direct-drive motor generates

a higher spin speed of 1,200 rpm for more effective, quiet operation. The washer also has

fewer moving parts, meaning fewer repairs.

7. Sanitize

When selecting this cycle, the water heats to an extra high temperature to remove 99.9%

of certain bacteria typically found on clothing, bedding, or towels. This certiﬁ cation is

conducted by NSF International, an independent third-party testing and certiﬁ cation

organization.

Please check garment care label to avoid garment damage. Only Sanitize cycles have been

designed to meet the requirements of this protocol for sanitization efﬁ cacy.

NSF Protocol P172

Sanitization Performance of Residential and

Commercial, Family-Sized Clothes Washers

WF409SNL-02657C-03_EN.indd Sec1:2WF409SNL-02657C-03_EN.indd Sec1:2 2011-06-22 ¿ÀÈÄ 4:17:322011-06-22 ¿ÀÈÄ 4:17:32

features of your new VRT™ washer _3

8. Pedestal with storage drawer (Model No: WE357*)

An optional 15in.(38.1cm) pedestal is available to raise the washer for easier loading and

unloading.

It also offers a built-in storage drawer that can hold a 100oz.(6.25 lb) bottle of detergent.

9. Stacking (Model No: SK-3A1/XAA, SK-4A/XAA, SK-5A/XAA)

Samsung washer and dryer can be stacked to maximize usable space. An optional stacking

kit is available for purchase from your Samsung retailer.

WF409SNL-02657C-03_EN.indd Sec1:3WF409SNL-02657C-03_EN.indd Sec1:3 2011-06-22 ¿ÀÈÄ 4:17:322011-06-22 ¿ÀÈÄ 4:17:32

4_ safety information

safety information

Congratulations on your new Samsung washer. This manual contains important

information on the installation, use and care of your appliance. Please take time to

read this manual to take full advantage of your washer’s many beneﬁ ts and features.

WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS

Warnings and Important Safety Instructions in this manual do not cover all possible conditions and

situations that may occur. It is your responsibility to use common sense, caution, and care when installing,

maintaining, and operating your washer.

IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS

What the icons and signs in this user manual mean:

WARNING

Hazards or unsafe practices that may result in severe personal injury

or death.

CAUTION

Hazards or unsafe practices that may result in minor personal injury or

property damage.

CAUTION

To reduce the risk of ﬁ re, explosion, electric shock, or personal injury

when using your washer, follow these basic safety precautions:

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions explicitly.

Unplug the power plug from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Note

These warning signs are here to prevent injury to you and others.

Please follow them explicitly.

After reading this section, keep it in a safe place for future reference.

Read all instructions before using the appliance.

SAVE THESE INSTRUCTIONS

WF409SNL-02657C-03_EN.indd Sec2:4WF409SNL-02657C-03_EN.indd Sec2:4 2011-06-22 ¿ÀÈÄ 4:17:322011-06-22 ¿ÀÈÄ 4:17:32

safety information _5

WARNING: To reduce the risk of ﬁ re, electric shock, or injury to persons when using your

appliance, follow basic precautions, including the following:

1. Read all instructions before using the appliance.

2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in,

or spotted with gasoline, dry-cleaning solvents, other ﬂ ammable or explosive substances

as they give off vapors that could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children is

necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door to the

washing or drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless

speciﬁ cally recommended in the user-maintenance instructions or in published user-

repair instructions that you understand and have the skills to carry out.

9. Do not add gasoline, dry-cleaning solvents, or other ﬂ ammable or explosive substances

to the wash water. These substances give off vapors that could ignite or explode.

10.Under certain conditions, hydrogen gas may be produced in a hot water system

that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If

the hot water system has not been used for such a period, before using a washer or

combination washer-dryer, turn on all hot water faucets and let the water ﬂ ow from

each for several minutes. This will release any accumulated hydrogen gas. As the gas is

ﬂ ammable, do not smoke or use an open ﬂ ame during this time.

SAVE THESE INSTRUCTIONS

WARNING

WF409SNL-02657C-03_EN.indd Sec2:5WF409SNL-02657C-03_EN.indd Sec2:5 2011-06-22 ¿ÀÈÄ 4:17:332011-06-22 ¿ÀÈÄ 4:17:33

6_ safety information

SEVERE WARNING SIGNS FOR INSTALLATION

Plug the power cord into an AC 120V/60Hz/15A wall socket or higher and use the socket

for this appliance only. In addition, do not use an extension cord.

- Sharing a wall socket with other appliances using a power strip or extending the power

cord may result in electric shock or ﬁ re.

- Do not use an electric transformer. It may result in electric shock or ﬁ re.

- Ensure that the power voltage, frequency and current are the same as those of the

product speciﬁ cations. Failing to do so may result in electric shock or ﬁ re.

The installation of this appliance must be performed by a qualiﬁ ed technician or service

company.

- Failing to do so may result in electric shock, ﬁ re, an explosion, problems with the

product, or injury.

Remove all foreign substances such as dust or water from the power plug terminals and

contact points using a dry cloth on a regular basis.

- Unplug the power plug and clean it with a dry cloth.

- Failing to do so may result in electric shock or ﬁ re.

Plug the power plug into the wall socket in the right direction so that the cord runs towards

the ﬂ oor.

- If you plug the power plug into the socket in the opposite direction, the electric wires

within the cable may be damaged and this may result in electric shock or ﬁ re.

This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

- This may result in electric shock, ﬁ re, an explosion, or problems with the product

- Never plug the power cord into a socket that is not grounded correctly and make sure

that it is in accordance with local and national codes.

Do not install this appliance near a heater, inﬂ ammable material.

Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct

sunlight and water (rain drops).

Do not install this appliance in a location where gas may leak.

- This may result in electric shock or ﬁ re.

Plug the power plug into the wall socket ﬁ rmly. Do not use a damaged power plug,

damaged power cord or loose wall socket.

- This may result in electric shock or ﬁ re.

Do not pull or excessively bend the power cord.

Do not twist or tie the power cord.

Do not hook the power cord over a metal object, place a heavy object on the power cord,

insert the power cord between objects, or push the power cord into the space behind the

appliance.

- This may result in electric shock or ﬁ re.

Do not pull the power cord, when unplugging the power plug.

- Unplug the power plug by holding the plug.

- Failing to do so may result in electric shock or ﬁ re.

When the power plug or power cord is damaged, contact your nearest service center.

safety information

WARNING

WF409SNL-02657C-03_EN.indd Sec2:6WF409SNL-02657C-03_EN.indd Sec2:6 2011-06-22 ¿ÀÈÄ 4:17:332011-06-22 ¿ÀÈÄ 4:17:33

safety information _7

CAUTION SIGNS FOR INSTALLATION

This appliance should be positioned in such a way that it is accessible to the power plug.

- Failing to do so may result in electric shock or ﬁ re due to electric leakage.

Install your appliance on a level and hard ﬂ oor that can support its weight.

- Failing to do so may result in abnormal vibrations, noise, or problems with the product.

Unplug the power plug when the appliance is not being used for long periods of time or

during a thunder/lightning storm.

- Failing to do so may result in electric shock or ﬁ re.

SEVERE WARNING SIGNS FOR USING

If the appliance is ﬂ ooded, cut the power immediately and contact your nearest service center.

If the appliance generates a strange noise, a burning smell or smoke, unplug the power

plug immediately and contact your nearest service center.

- Failing to do so may result in electric shock or ﬁ re.

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without

touching the power plug. Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or ﬁ re.

Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or

other ﬂ ammable or explosive substances.

- This may result in electric shock, ﬁ re or an explosion.

Do not open the washer door by force while it is operating (high-temperature washing/

drying/spinning).

- Water ﬂ owing out of the washer may result in burns or cause the ﬂ oor to be slippery.

This may result in injury.

- Opening the door by force may result in damage to the product or injury.

Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the

washer before using it.

Do not insert your hand under the washer.

- This may result in injury.

Do not touch the power plug with wet hands.

- This may result in electric shock.

Do not turn the appliance off by unplugging the power plug while an operation is in progress.

- Plugging the power plug into the wall socket again may cause a spark and result in

electric shock or ﬁ re.

Keep all packaging materials well out of the reach of children, as packaging materials can

be dangerous to children.

- If a child places a bag over its head, it may result in suffocation.

Do not let children or inﬁ rm persons use this washer unsupervised.

- Failing to do so may result in electric shock, burns or injury.

Do not insert your hand or a metal object under the washer while it is operating.

- This may result in injury.

Make sure the detergent drawer is closed before you put laundry into the washer or remove

laundry from the washer.

- If the detergent drawer is open, you could strike the drawer with your head and injure yourself.

Do not attempt to repair, disassemble, or modify the appliance yourself.

- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.

- When repairing or reinstalling the appliance is required, contact your nearest service center.

- Failing to do so may result in electric shock, ﬁ re, problems with the product, or injury.

WARNING

CAUTION

WF409SNL-02657C-03_EN.indd Sec2:7WF409SNL-02657C-03_EN.indd Sec2:7 2011-06-22 ¿ÀÈÄ 4:17:342011-06-22 ¿ÀÈÄ 4:17:34

8_ safety information

safety information

If any foreign substance such as water has entered the appliance, unplug the power plug

and contact your nearest service center.

- Failing to do so may result in electric shock or ﬁ re.

When the water supply hose comes loose from the faucet and ﬂ oods the appliance, unplug

the power plug.

- Failing to do so may result in electric shock or ﬁ re.

CAUTION SIGNS FOR USING

When the washer is contaminated by a foreign substance such as detergent, dirt, food

waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.

- Failing to do so may result in discoloration, deformation, damage or rust.

The front glass may be broken by a strong impact. Take care when using the washer.

- When the glass is broken, it may result in injury.

After a water supply failure or when reconnecting the water supply hose, open the faucet slowly.

Open the faucet slowly after a long period of non-use.

- The air pressure in the water supply hose or the water pipe may result in damage to a

part or in water leakage.

If a drain error occurs during an operation, check if there is a draining problem.

- If the washer is used when it is ﬂ ooded because of a draining problem, it may result in

electric shock or ﬁ re due to electric leakage.

Insert the laundry into the washer completely so that laundry does not get caught in the door.

- If laundry gets caught in the door, it may result in damage to the laundry or the washer,

or result in water leakage.

Ensure that the faucet is turned off when the washer is not being used.

- Ensure that the screw on the water supply hose connector is properly tightened.

- Failing to do so may result in property damage or injury.

Take care that the rubber seal and the front door glass are not contaminated by a foreign

substance (e.g. waste, thread, hair, etc.)

- If a foreign substance is caught in the door or the door is not completely closed, it may

cause a water leakage.

Open the faucet and check if the water supply hose connector is ﬁ rmly tightened and that

there is no water leaking before using the product.

- If the screws or the water supply hose connector are loose, it may result in water

leakage.

Do not stand on top of the appliance or place objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.

- This may result in electric shock, ﬁ re, problems with the product, or injury.

Do not operate the appliance with wet hands.

- This may result in electric shock.

Do not spray volatile material such as insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also result in electric shock, ﬁ re or problems

with the product.

Do not place an object that generates a electromagnetic ﬁ eld near the washer.

- This may result in injury due to a malfunction.

Since the water drained during a high-temperature wash or drying cycle is hot, do not

touch the water.

- This may result in burns or injury.

CAUTION

WF409SNL-02657C-03_EN.indd Sec2:8WF409SNL-02657C-03_EN.indd Sec2:8 2011-06-22 ¿ÀÈÄ 4:17:342011-06-22 ¿ÀÈÄ 4:17:34

safety information _9

Do not wash, spin or dry water-proof seats, mats or clothing (*).

- Do not wash thick, hard mats even if the washer mark is on the care label.

- This may result in injury or damage to the washer, walls, ﬂ oor or clothing due to

abnormal vibrations.

* Woolen bedding, rain covers, ﬁ shing vests, ski pants, sleeping bags, diaper covers,

sweat suits, and bicycle, motor cycle, car covers, etc.

Do not operate the washer when the detergent box is removed.

- This may result in electric shock or injury due to water leakage.

Do not touch the inside of the tub during or just after drying as it is hot.

- This may result in burns.

Do not insert your hand into the detergent box after opening it.

- This may result in injury as your hand may be caught by the detergent input device.

Do not place any objects (such as shoes, food waste, animals) other than laundry into the

washer.

- This may result in damage to the washer, or injury and death in the case of pets due to

the abnormal vibrations.

Do not press the buttons using sharp objects such as pins, knifes, ﬁ ngernails, etc.

- This may result in electric shock or injury.

Do not wash laundry contaminated by oils, creams or lotions usually found in skincare

shops or massage clinics.

- This may result in the rubber seal becoming deformed and water leakage.

Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long

periods of time.

- This may cause the tub to rust.

- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the

surface and use a sponge to clean it. Never use a metal brush.

Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry

contaminated by dry cleaning detergent.

- This may result in spontaneous combustion or ignition due to the heat of the oxidation of

the oil.

Do not use hot water from water cooling/heating devices.

- This may result in problems with the washer.

Do not use natural hand-washing soap for the washer.

- If it hardens and accumulates inside the washer, it may result in problems with the

product, discoloration, rust or bad odors.

Do not wash large laundry items such as bedding in the washing net.

- Place socks and brassieres into the washing net and wash them with the other laundry.

- Failing to do so may result in injury due to abnormal vibrations.

Do not use hardened detergent.

- If it accumulates inside the washer, it may result in water leakage.

Do not wash throw rug or doormat.

- If you wash throw rug or doormat, the sand will accumulate inside the washer. It may

result in error such as not draining.

SEVERE WARNING SIGNS FOR CLEANING

Do not clean the appliance by spraying water directly onto it.

Do not use benzene, thinner or alcohol to clean the appliance.

- This may result in discoloration, deformation, damage, electric shock or ﬁ re.

Before cleaning or performing maintenance, unplug the appliance from the wall socket.

- Failing to do so may result in electric shock or ﬁ re.

WARNING

WF409SNL-02657C-03_EN.indd Sec2:9WF409SNL-02657C-03_EN.indd Sec2:9 2011-06-22 ¿ÀÈÄ 4:17:342011-06-22 ¿ÀÈÄ 4:17:34

10_ contents

contents

SETTING UP YOUR WASHER

11

11 Checking the parts

12 Meeting installation requirements

12 Electrical supply

12 Grounding

12 Water

12 Drain facility

13 Flooring

13 Location consideration

13 Alcove or closet installation

13 Undercounter installation(washer only)

14 With optional pedestal base or stacking kit

15 Installing your washer

WASHING A LOAD OF LAUNDRY

17

17 Loading your washer

17 Getting started

18 Overview of the control panel

20 Child lock

20 Garment+

20 My cycle

21 Washing clothes using the cycle selector

22 Detergent use

22 Features

CLEANING AND MAINTAINING YOUR

WASHER

24

24 Cleaning the exterior

24 Cleaning the interior

24 Cleaning the dispensers

25 Storing your washer

25 Cleaning the debris ﬁ lter

26 Cleaning the door seal/bellow

26 Preserving the top cover and the front frame

TROUBLESHOOTING AND

INFORMATION CODES

27

27 Check these points if your washer…

29 Information codes

APPENDIX

31

31 Fabric care chart

32 Cycle chart

33 Helping the environment

33 Declaration of conformity

33 Speciﬁ cation

WARRANTY

34

34 Warranty

WF409SNL-02657C-03_EN.indd Sec9:10WF409SNL-02657C-03_EN.indd Sec9:10 2011-06-22 ¿ÀÈÄ 4:17:342011-06-22 ¿ÀÈÄ 4:17:34

setting up your washer _11

01 SETTING UP

setting up your washer

CHECKING THE PARTS

Unpack your washer and inspect it for shipping damage. Make sure you have received all of the items

shown below. If your washer was damaged during shipping, or you do not have all of the items, contact

1-800-SAMSUNG(726-7864).

To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.

Keep all packaging materials well out of the reach of children, as packaging materials can be

dangerous to children.

- If a child places a bag over its head, it may result in suffocation.

Parts supplied

( use for the Upper Bolt Hole )

Wrench Bolt hole covers Water supply hoses

Hose guide Plastic zip hose tie Manual book

Tools needed

Pliers Flat screwdriver

WARNING

Adjustable legs

Cold water supply

hose

Hot water supply hose

Drain hose

Detergent drawer

Control panel

Door

Tub

Debris ﬁ lter

Drain tube

Filter cover

Power cord

and plug

WF409SNL-02657C-03_EN.indd Sec3:11WF409SNL-02657C-03_EN.indd Sec3:11 2011-06-22 ¿ÀÈÄ 4:17:352011-06-22 ¿ÀÈÄ 4:17:35

12_ setting up your washer

MEETING INSTALLATION REQUIREMENTS

Electrical supply

• 120 Volt 60 Hz 15 AMP fuse or circuit breaker

• Individual branch circuit serving only your washer is recommended.

• Your washer is equipped with a power cord.

Never use an extension cord.

Grounding

ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a power cord having a three-prong grounding plug for use in a

properly installed and grounded outlet.

Improper connection of the equipment-grounding conductor can result in a risk of electrical

shock. Check with a qualiﬁ ed electrician or serviceman if you are in doubt as to whether the

appliance is properly grounded. Do not modify the plug provided with the appliance – if it

does not ﬁ t the outlet, have a proper outlet installed by a qualiﬁ ed electrician.

IMPORTANT SAFETY PRECAUTIONS

• To prevent unnecessary risk of ﬁ re, electrical shock or personal injury, all wiring and

grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.

70 Latest Revision and local codes and ordinances. It is the personal responsibility of the

appliance owner to provide adequate electrical service for this appliance.

Never connect ground wire to plastic plumbing lines, gas lines, or hot water pipes.

Water

To correctly ﬁ ll your washer in the proper amount of time, water pressure of 20-116psi(137-

800kPa) is required.

Water pressure less than 20 psi(137kPa) may cause water valve failure, or may not allow the

water valve to shut off completely. Or, it may extend the ﬁ ll time beyond what your washer

controls allow, resulting in your washer turning off. A time limit is built into the controls in the

event of an internal hose becoming loose and ﬂ ooding your home.

The water faucets must be within 4 ft.(122cm) of the back of your washer for the inlet hoses

provided with your washer.

Accessory inlet hoses are available in various lengths up to 10 ft.(305cm) for faucets that

are further away from the back of your washer.

To avoid the possibility of water damage:

• Have water faucets easily accessible.

• Turn off faucets when the washer is not in use.

• Periodically check that there is no leakage from the water inlet hose ﬁ ttings.

Check all connections at the water valve and faucet for leaks.

Drain facility

The recommended height of the standpipe is 18 in (46 cm). The drain hose must be routed

through the drain hose clip to the standpipe. The standpipe must be large enough to accept the

outside diameter of the drain hose. The drain hose is attached at the factory.

setting up your washer

WARNING

WF409SNL-02657C-03_EN.indd Sec3:12WF409SNL-02657C-03_EN.indd Sec3:12 2011-06-22 ¿ÀÈÄ 4:17:362011-06-22 ¿ÀÈÄ 4:17:36

setting up your washer _13

01 SETTING UP

Flooring

For best performance, your washer must be installed on a solidly constructed ﬂ oor. Wood ﬂ oor

may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting

and soft tile surfaces are contributing factors in vibration and may cause your washer to move

slightly during the spin cycle.

Never install your washer on a platform or weakly supported structure.

Location consideration

Do not install your washer in areas where water may freeze, since your washer will always

maintain some water in its water valve, pump, and hose areas. This can cause damage the

pump, hoses and other components.

Alcove or closet installation

MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:

Sides – 1 In.(2.5 cm)

Rear – 4 In.(10.2 cm)

Top – 17 In.(43.2 cm)

Closet Front – 2 In.(5.1 cm)

If the washer and dryer are installed together, the closet front must have at least a 72 in² (465

cm²) unobstructed air opening. Your washer alone does not require a speciﬁ c air opening.

A. Recessed area

B. Side view - closet or conﬁ ned area

Undercounter installation(washer only)

CAUTION

1 in.

(2.5 cm)

27 in.

(68.6 cm)

1 in.

(2.5 cm)

40 in.

(101.6 cm)

B

2 in.

(5 cm)

31.9 in.

(81.1 cm)

4 in.

(10.2 cm)

17 in.

(43.2 cm)

A

1 in.

(2.5 cm)

27 in.

(68.6 cm)

1 in.

(2.5 cm)

1 in.

(2.5 cm)

27 in.

(68.6 cm)

WF409SNL-02657C-03_EN.indd Sec3:13WF409SNL-02657C-03_EN.indd Sec3:13 2011-06-22 ¿ÀÈÄ 4:17:362011-06-22 ¿ÀÈÄ 4:17:36

14_ setting up your washer

setting up your washer

With optional pedestal base or stacking kit

Required Dimensions for Installation With Pedestal

Required Dimensions for Installation With Stacking Kit

341.1 in.

(86.5 cm)

4 in.

(10 cm)

51.7 in. (131.4 cm) to clear open door

27 in.

(68.6 cm)

39 in.

(99.1 cm)

53.6 in.

(136.2 cm)

31.9 in.

(81.1cm)

3 in.

(7.6 cm)

Closet or Door

48 in.² *

(310 cm²)

3 in.

(7.6 cm)

24 in.² *

(155 cm²)

1 in.

(2.5 cm)

5.5 in.**

(14 cm)

2.5 in.

(6.3 cm)

6 in. *

(15.2 cm)

1 in.

(2.5 cm)

78 in.

(198.1 cm)

27 in.

(68.6 cm)

* Required spacing

** External exhaust elbow requires additional

space.

WF409SNL-02657C-03_EN.indd Sec3:14WF409SNL-02657C-03_EN.indd Sec3:14 2011-06-22 ¿ÀÈÄ 4:17:372011-06-22 ¿ÀÈÄ 4:17:37

setting up your washer _15

01 SETTING UP

INSTALLING YOUR WASHER

STEP 1

Selecting a location

Before you install the washer, make sure the location:

• Has a hard, level surface without carpeting or ﬂ ooring that may obstruct ventilation.

• Is away from direct sunlight.

• Has adequate ventilation.

• Will not be freezing (below 32 ˚F or 0 ˚C).

• Is away from heat sources such as oil or gas.

• Has enough space so that the washer doesn’t stand on its power cord.

STEP 2

Removing the shipping bolts

Before using your washer, you must remove the four

shipping bolts from the back of the unit.

1. Loosen all the bolts with the supplied wrench.

2. Slide the bolt and spacer up and remove the bolt with

the spacer through the hole in the rear wall of your

washer. Repeat for each bolt.

3. Fill the holes with the supplied bolt hole covers.

4. Keep the shipping bolts and spacers for future use.

STEP 3

Installing your washer

1.

Place the drain hose in the drain facility.

Be sure an airtight connection is NOT

made between the drain hose and the

standpipe.

The standpipe must be at least 18in.(46

cm) high.

Caution must always be exercised to

avoid collapsing or damaging the drain

hose. For best results, the drain hose

should not be restricted in any way – by

elbows, couplings, or excessive lengths.

For situations where the drain hose

cannot be conveniently elevated to at

least 18in.(46 cm), the drain hose must

be supported.

2. Before Connect the inlet hoses to water faucets, Check to

ensure a washer is inside coupling.

96” Max

18” Min

96” Max

18” Min

Hose

retainer

Tie

strap

Laundry tub

Stand pipe

Hose

Guide

Rubber

Washer

Coupling

WF409SNL-02657C-03_EN.indd Sec3:15WF409SNL-02657C-03_EN.indd Sec3:15 2011-06-22 ¿ÀÈÄ 4:17:372011-06-22 ¿ÀÈÄ 4:17:37

16_ setting up your washer

3. Check the inlet hose to ensure a washer is inside each ﬁ ll

hose.

Thread the inlet hoses to the HOT and COLD faucet

connections.

On the other end of the hose, check for one rubber

washer per hose and install each ﬁ ll hose to the water

valve. Make sure the hose with the Hot printed line is

attached to the HOT faucet. Tighten by hand until snug,

then two-thirds of a turn with pliers.

For correct water use, connect both HOT and COLD

water valves. If either or both are not connected, an “nF”

(no ﬁ ll) error can occur.

4. Turn on the “HOT” and “COLD “water supply and check

all connections at the water valve and the faucet for leaks.

5. Plug the power cord into a 3-prong, well grounded 120 volt

60 Hz approved electrical outlet protected by a 15-amp

fuse or comparable circuit breaker.

Your washer is grounded through the third prong of the

power cord when plugged into a three-prong grounded

receptacle.

6. Slide your washer into position.

7. Level your washer by turning the leveling legs in or out as

necessary by hand or by using the wrench included with

your washer.

When your washer is level, tighten the locking nuts using

the wrench or (-) ﬂ athead screwdriver.

Your washer must be leveled on all four sides. A

carpenter’s level should be used on all four corners of

your washer. It’s the best to recheck after the ﬁ rst dozen

washes.

Avoid damage to the legs. Do not move

the washer unless the locking-nuts are

fastened to the bottom of the washer.

setting up your washer

Cold

Hot

Rubber

Washer

Cold printed

Hot printed

Levelling

Leg

Locking

Nut

WF409SNL-02657C-03_EN.indd Sec3:16WF409SNL-02657C-03_EN.indd Sec3:16 2011-06-22 ¿ÀÈÄ 4:17:382011-06-22 ¿ÀÈÄ 4:17:38

washing a load of laundry _17

02 WASHING A LOAD OF LAUNDRY

washing a load of laundry

LOADING YOUR WASHER

• You can ﬁ ll the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub.

• Overloading may reduce washing efﬁ ciency, cause excess wear, and possibly cause creasing or

wrinkling of the load.

• Wash delicate items such as bras, hosiery, and other lingerie in the delicates cycle with similar

lightweight items.

• When washing big bulky items or a few smaller items that don’t ﬁ ll the tub completely – a rug, a pillow,

stuffed toys, or one or two sweaters, for example – add a few towels to improve tumbling and spin

performance.

During the spin cycle, the washer may add additional water to redistribute the excessive imbalance

inside the tub.

•

When washing heavily soiled loads, do not overload your washer in order to assure good cleaning results.

• To add a forgotten item:

1. Press the Power button.

2. Press the Start/Pause button.

3. Wait for the door lock light to go out (Immediately).

4. Add the item, close the door, and press the Start/Pause button.

The door safety state continues for 15 seconds and the cycle is restarted.

To ensure thorough cleaning, add items within ﬁ ve minutes of starting the wash cycle.

GETTING STARTED

1. Load your washer.

2. Close the door.

Push the laundry into the tub completely to prevent the laundry from being caught in the door or from

falling out of the tub.

3. Press the Power button.

4. Add detergent and additives to the dispenser (See page 23~24).

5. Select the appropriate cycle and options for the load (See page 18~19).

6. Press the Start/Pause button.

7. The Wash Indicator will illuminate.

8. The estimated cycle time will appear in the display.

The time may ﬂ uctuate to better indicate the time remaining in the cycle.

The actual time required for a cycle may differ from the estimated time in the display depending on the

water pressure, water temperature, detergent, and laundry.

9. Before your washer starts to ﬁ ll, it will make a series of clicking noises to check the door lock and do a

quick drain.

• When the cycle is complete, the door lock light will go out and “End” will appear in the display.

• DO NOT attempt to open the door until the door lock light is off. To add a forgotten item, see

“Loading your washer” section (See page 17).

• When your washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle

continues.

• Pressing Power button cancels the cycle and stops your washer.

•

The Wash, Rinse and Spin indicators will illuminate during those portions of the cycle.

Do not place anything on top of your washer while it is running.

CAUTION

WARNING

WF409SNL-02657C-03_EN.indd Sec8:17WF409SNL-02657C-03_EN.indd Sec8:17 2011-06-22 ¿ÀÈÄ 4:17:402011-06-22 ¿ÀÈÄ 4:17:40

18_ washing a load of laundry

OVERVIEW OF THE CONTROL PANEL

Cycle Selector

Select the appropriate cycle for the type of load.

This will determine the tumble pattern and spin speed for the cycle.

To minimize wrinkling of your laundry, select the Perm Press cycle.

Normal - For most fabrics including cottons, linens, and normally soiled garments.

Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.

Whites - For white fabrics with or without bleach.

Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally

soiled garments.

Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to

150°F(65.6°C) to eliminate bacteria.

If Pause is selected during the heating portion of the Sanitize cycle, your

washer door will remain locked for your safety.

Bedding - For bulky items such as blankets and sheets. When you are

washing comforters, use liquid detergent.

Delicates - For sheer fabrics, bras, lingerie silk, and other handwash-only

fabrics. For best results, use liquid detergent.

Hand Wash - For handwashable, special care garments.

Wool - For machine-washable wool. Loads should be under 8 pounds.

• The Wool cycle washes laundry by moving the wash drum horizontally to

maintain the characteristics of the wool ﬁ bers and to prevent damaging

the cloth. It then stops for a while to allow the laundry to soak in the

water. This stop operation is not a problem.

• It is recommended using a neutral detergent to prevent damage to the

cloth and to improve the washing results.

The Wool cycle of this machine has been approved

by Woolmark for the washing of machine washable

Woolmark products provided that the products are

washed according to the instructions on the garment

label and those issued by the manufacturer of this

washer, M0904.

Quick Wash - For lightly soiled garments needed quickly.

Rinse + Spin - Use for loads that need rinsing only or to add rinse-added

fabric softener to a load.

Spin Only - Provides a spin to remove more water.

Digital graphic

display

Displays the remaining cycle time, all cycle information, and error messages.

washing a load of laundry

3

1

2

654 7

8 9

1

2

WF409SNL-02657C-03_EN.indd Sec8:18WF409SNL-02657C-03_EN.indd Sec8:18 2011-06-22 ¿ÀÈÄ 4:17:402011-06-22 ¿ÀÈÄ 4:17:40

washing a load of laundry _19

02 WASHING A LOAD OF LAUNDRY

Wash Option

selection

buttons

Press these buttons to select different cycle options.

Pre Wash - To use this feature add detergent to the pre wash section of the

detergent compartment. When turned on, the washer ﬁ lls with cold water and

detergent, tumbles, then drains and advances to the selected wash cycle.

Some cycles cannot be selected with with this option (See page 33).

You cannot select the prewash option in the Delicate, Wool, Quick

Wash, Hand Wash, Rinse+Spin, and Spin Only cycles.

Extra Rinse - Add an additional rinse at the end of the cycle to more

thoroughly remove laundry additives and perfumes.

Extended Spin - Add additional time to remove more water from loads.

Delay Start - Any cycle can be delayed for 1 to 24 hours in one-hour

i

ncrements. Displayed hour indicates the time at which the wash will be started.

My Cycle - Choose your favorite cycle including temperature, spin, soil level, option, etc.

Temperature

selection button

Press the button repeatedly to cycle through the different water temperature options.

Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the Sanitize cycle.

Hot/Cold - Whites and heavily soiled, colorfast items.

Warm/Warm - Colorfast items. When warm rinse is selected, only the ﬁ nal rinse will

be warm.

The other rinses will be cold to conserve energy.

Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.

Cold/Cold - Brightly colored, very lightly soiled items.

Spin selection

button

Press the button repeatedly to cycle through the different spin speed options.

Extra High - Removes more water from loads during spin.

To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use

the Extra High spin option for these loads, nor overload your washer.

High - Use for underwear, t-shirts, jeans and sturdy cottons.

Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.

Low - Use for delicate items needing a slow spin speed.

No Spin - Drains your washer without spinning. Use for extremely delicate

items that cannot tolerate any spin.

Soil Level

selection button

Press the button to select the soil level/washing time.

(Light    Normal    Heavy)

Heavy - For heavily soiled loads.



Normal - For moderately soiled loads. This setting is best for most loads.



Light - For lightly soiled loads.

Signal selection

button

Press the button to increase or decrease the end of cycle signal volume or

turn off the signal.

(Off    Softer    Louder)

Start/Pause

selection button

Press to pause and restart programs.

Power button

Press once to turn your washer on, press again to turn your washer off. If

the washer is left on for more than 10 minutes without any buttons being

touched, the power automatically turns off.

3

4

5

6

7

8

9

WF409SNL-02657C-03_EN.indd Sec8:19WF409SNL-02657C-03_EN.indd Sec8:19 2011-06-22 ¿ÀÈÄ 4:17:412011-06-22 ¿ÀÈÄ 4:17:41

20_ washing a load of laundry

washing a load of laundry

Child lock

A function that prevents children from playing with your washer.

Once the Child Lock function is activated, the control panel cannot be activated, preventing

children from playing with the washer.

ACTIVATING/DEACTIVATING

If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal

buttons at the same time for 3 seconds.

How It works:

1. To activate or deactivate the Child Lock function, press and hold both the Soil level and

Signal buttons for 3 seconds. Activation/Deactivating the Child Lock function is only available

when the power is on.

2. When the Child Lock function is activated, and any button except for the Power button is

pressed, the buzzer will sound for a short period and the “Child Lock” indicator will turn off

for 10 seconds.

3. The Child Lock function stays on even after the power has been turned on and off or the

power cord has been disconnected and reconnected.

When buttons, other than the Power button, do not respond, please check if the Child

Lock function is on.

Garment+

You can add or take out laundry items even after the wash has started, as long as the

“Garment+ ” light is turned on. Pressing the Start/Pause button unlocks the door, unless the

water is too hot or if there is too much water in your washer. If you are able to unlock the door

and wish to continue the wash cycle, close the door and press the Start/Pause button.

My cycle

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button

convenience.

By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The

“My Cycle” light will indicate activation.

You can select all options as follows in the My Cycle mode.

1. Select cycle using the Cycle Selector.

2. After cycle selection, set each option.

See page 33 for available option settings with each cycle.

3. Then, you can store the cycle and options you select by pressing the Start/Pause button

in the My Cycle mode. The cycle and options you select will be displayed the next time you

choose the My Cycle function.

You can change the My Cycle settings by repeating the same process above.

The last used setting will be displayed the next time you choose the My Cycle function.

WF409SNL-02657C-03_EN.indd Sec8:20WF409SNL-02657C-03_EN.indd Sec8:20 2011-06-22 ¿ÀÈÄ 4:17:412011-06-22 ¿ÀÈÄ 4:17:41

La page charge ...

Samsung WF409ANW Manuel utilisateur

Ce manuel convient également à

Samsung WF409ANW Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents