Jenn-Air JDB3200AWW0 Le manuel du propriétaire

Marque: Jenn-Air

Modèle: JDB3200AWW0

Catégorie: Lave-vaisselle

Taper: Le manuel du propriétaire

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,

please visit our website at www.jennair.com for additional information. If you still need assistance, call us at 1-800-688-1100. In

Canada, visit our website at www.jennair.ca or call us at 1-800-807-6777.

You will need your model and serial number located near the door on the right-hand or left-hand side of the dishwasher interior.

Para obtener acceso a "lnstrucciones para elusuario de lalavavajillas" en espa_ol, o para obtener informaci6n adicional de su

producto, visite: www.jennair.com

Tenga listo su nOmero de modelo completo. Puede encontrar su nOmerode modelo y de serie en la etiqueta ubicada cerca de la

puerta al lado derecho o izquierdo del interior de la lavavajillas.

TableofContents

DISHWASHER SAFETY ............................................................. 1

QUICK STEPS ............................................................................ 3

DISHWASHER USE .................................................................... 3

CYCLE AND OPTION DESCRIPTIONS .................................... 5

DISHWASHER FEATURES ........................................................ 7

FILTRATION SYSTEM ............................................................... 8

DISHWASHER CARE ................................................................. 9

TROUBLESHOOTING .............................................................. 10

WARRANTY .............................................................................. 14

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

W10208700A

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

[] Read all instructions before using the dishwasher. [] Do not tamper with controls.

[] Use the dishwasher only for its intended function.

[] Use only detergents or rinse agents recommended for use in

a dishwasher, and keep them out of the reach of children.

[] When loading items to be washed:

1) Locate sharp items so that they are not likely to damage

the door seal; and

2) Load sharp knives with the handles up to reduce the risk

of cut-type injuries.

[] Do not wash plastic items unless they are marked

"dishwasher safe" or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

[] Do not touch the heating element during or immediately after

use.

[] Do not operate the dishwasher unless all enclosure panels

are properly in place.

[] Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

[] To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

[] Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

[] Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

SAVE THESE iNSTRUCTiONS

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for

electric current. The dishwasher is equipped with a cord

having an equipment-grounding conductor and a grounding

plug. The plug must be plugged into an appropriate outlet

that is installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

[]

Check with a qualified electrician or service representative

if you are in doubt whether the dishwasher is properly

grounded. Do not modify the plug provided with the

dishwasher; if it will not fit the outlet, have a proper outlet

installed by a qualified electrician.

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded metal,

permanent wiring system, or an equipment-grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the dishwasher.

SAVE THESE iNSTRUCTiONS

Tip Over Hazard

Do not use dishwasher until completely installed.

Do not push down on open door.

Doing so can result in serious injury or cuts.

Prepare and load _

dishwasher. %Y

Select a cycle and option.

(Cycles and options vary by model.)

EVERYDAY CYCLES

ENTERTAINMENT CYCLES __

OPTIONS

Add detergent _ _

for cleaning and

rinse aid for

drying. ..,ii.!:!}.:._,"

Start dishwasher.

NOTE: If the START/

RESUME button islocated on

the top of the door, push the

door firmly closed within

3 seconds of pressing

START/R ESUME.

Start /

Resume

Prepare and Load the Dishwasher

IMPORTANT: Remove leftover food, bones, toothpicks and other

hard items from the dishes. Remove labels from containers before

washing.

10 Place load pattern

........ _=_ ....... .,._,_ . ..i..,, ...._ , ._

_. ..._..4,8 x _.t_t,¢..., ..i/

Upper rack Lower rack

12 Place load pattern

Us®

Make sure that when the dishwasher door is closed no items

are blocking the detergent dispenser.

• Items should be loaded with soiled surfaces facing down and

inward to the spray as shown. This will improve cleaning and

drying results.

• Avoid overlapping items like bowls or plates that may trap food.

• Place plastics, small plates and glasses in the upper rack.

Wash only plastic items marked "dishwasher safe."

• To avoid thumping/clattering noises during operation: Load

dishes so they do not touch one another. Make sure lightweight

load items are secured in the racks.

When loading silverware, always place sharp

items pointing down. Mix some of the items

having pointing up and some pointing down.

STEP2

Add Detergent

NOTE: Ifyou do not plan to run a wash cycle soon, run a rinse

cycle. Do not use detergent.

• Use automatic dishwasher detergent only. Add powder, liquid

or tablet detergent just before starting a cycle.

Upper rack Lower rack

Make sure nothing keeps spray arm(s) from

spinning freely. It is important for the water

spray to reach all soiled surfaces.

Freshautomatic

dishwasherdetergent

resultsinbetter

cleaning.Storetightly

closeddetergent

containerinacool,dry

place.

NOTE:Formostwaterconditions,the

factorysettingof2willgivegood

results.Ifyouhavehardwaterornotice

ringsorspots,tryahighersetting.Turn

thearrowadjusterinsidethedispenser

byeitherusingyourfingersorinserting

aflat-bladescrewdriverintothecenter

ofthearrowandturning.

A. Cover latch

B.Main Washsection

C. Pre-Washsection

• The amount of

detergent to use depends on:

How much soil remains on the items - Heavily soiled loads

require more detergent.

The hardness of the water - If you use too little in hard water,

dishes won't be clean. If you use too much in soft water,

glassware will etch.

Soft to Medium Water (0-6 grains per U.S. gallon)

[typical water softener water and some city water]

Medium to Hard Water (7-12 grains per U.S. gallon)

[well water and some city water]

• Depending on your water hardness, fill the Main Wash section

of the dispenser as shown. Fill the Pre-Wash section to the

level shown, if needed.

NOTE: Fill amounts shown

are for standard powdered

detergent. Follow instructions

on the package when using

other dishwasher detergent.

Add Rinse Aid

HardWater

Soft Water

HardWater

SoftWater

MainWash Pre-Wash

Your dishwasher is designed to use rinse aid for good drying

performance. Without rinse aid your dishes and dishwasher

interior will have excessive moisture. The heat dry option will

not perform as well without rinse aid.

Rinse aid keeps water from forming droplets that can

dry as spots or streaks. They also improve drying by

allowing water to drain off of the dishes after the final

rinse.

Rinse aid helps to reduce excess moisture on the

dish racks and interior of your dishwasher.

Full

Add

Check the rinse aid indicator. Add rinse aid when indicator

drops to "Refill" level.

To add rinse aid, turn the dispenser cap

to "Refill" and lift off. Pour rinse aid into

the opening until the indicator level is at

"Full." Replace the dispenser cap and

turn to "Lock." Make sure cap is fully

locked.

Lock

Refill__

turn to lock

Select a Cycle (cycles vary by model)

See "Cycle and Option Descriptions" charts inthe following

section.

Heavier cycles and options affect cycle length. Some cycles and

options will take up to 31/2hours to complete.

EVERYDAY CYCLES

ENTERTAINMENT CYCLES __

Select Options (options vary by model)

See "Cycle and Option Descriptions" charts inthe following

section.

You can customize your cycles by pressing the options desired.

OPTIONS

STEP4

Start or Resume a Cycle

• Run hot water at the sink nearest your

dishwasher until the water is hot. Turn off water. Start/

Resume

• Press START/RESUME and close the door

within 3 seconds. The door latches automatically. Press

START/RESUME to repeat the same cycle and options as in the

previous wash cycle.

• You can add an item anytime before the main wash starts.

Open the door slowly and add the item. Press START/RESUME

and close the door within 3 seconds.

EVERYDAY CYCLES ENTERTAINMENTCYCLES -- OPTIONS

Control Lock

This information covers several different models. Your dishwasher may not have all the cycles and options described.

CYCLES DISH LOAD TYPES DESCRIPTIONS

WASH TIME (HH:MM)

Cycle Cycle +

Minimum Options

Minimum

*Maximum

use for any loads With heavYl Designed to select the number of water 2:1 i 2:35 3:07

Sensor normaor ght amounts of f ls best su ted for the so eve ofeach

Wash food Soil. load.

-- Use for hard-to-clean, heavily This cycle forces max time water and

Heavy I soiled pots, pans, casseroles, heat.

Wash I and regular tableware.

1:39 2:09 3:30

. Use for 10adsWith normal The energy_usage label is based on this i:1 ! li4i 3:30

Normal amounts of food soil. cycle, During the washl the wash action

Wash wil! repeatedly pause for several seconds,

Use for lightly soiled items or During the wash, the wash action will

I China! I china and crystal, repeatedly pause for several seconds.

Crystal

1:17 1:47 2:51

When you need faSt results, This cycle does not d_i For imprOved 0i58 0 88 0;88

1Hour the ! Hour Wash will clean drying select the Heated Dry oPtion

Wash your dishes using slightly adding 1/2hour to the wash Cyc!e

more water and energy.

I PlateWarmer I

Use for loads of clean plates

and keep food warm longer

by serving it on a heated

plate.

The Plate Warmer cycle will heat 12 clean

dinner plates to a warm temperature.

Remember when removing the items

from the dishwasher they will still be

warm.

0:37 0:37 0:37

You can customize your cycle by selecting an option.

See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can change

an option anytime before the selected option begins.

*Maximum wash times depend on water temperature, heavy soil condition, dish load size and options selected.

OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:

Use for small ioads. For added conVenienCe, use for Washing a small load Of sensor Wash, Heavy

I Top I dishes n the top rack, Wash, Normal Wash,

Race j .................................................................................................................................................. China/Crysta! o r!Hour

Wash

I SteamClean]

Use for loads with normal

amounts of soil.

The Steam option adds steam to the cycle. This option

raises the water temperature in the final rinse to

approximately 155°F (68°C). The option adds heat and time

to the cycle.

Heavy Wash or Normal

Wash cycle.

Loads containing tough, Increases the target water temperature during the wash Heavy Wash or Normal

Super ] baked-on food. portions of the cycle: Wash cyc!e

Scrub

Adds heat, wash time and water to the cycle,

OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:

Sanitize ]

Tosanitize your dishes and

glassware in accordance

with NSF/ANSl Standard

184 for Residential

Dishwashers.

Raises the water temperature in the final rinse to

approximately 155°F (68°C). This high temperature rinse

sanitizes your dishes and glassware in accordance with

NSF/ANSl Standard 184 for Residential Dishwashers.

Certified residential dishwashers are not intended for

licensed food establishments.

The Sanitize or Sani Rinse option adds heat and time to the

cycle.

Normal Wash cycle.

Heavy Wash cycle

automatically uses

Sanitize. Only these

sanitization cycles have

been designed to meet

the NSF/ANSl

requirements.

For best drying results, dry Turn OFEwhen loads contain plastic dinnerware that may be A!l Cyclesl Automatic

H_rtyd_ dishes with heat. sensitive to high temperatures, with all wash cycles

.............................................. This option With the use of rinse aid Will provide the best ...... un!ess Y0U turn !t off: ......

drYing performance ............................

4 Hour

Delay ]

To run your dish washer at Delays the start of a cycle up to 4 hours.

a later time or during off- Select a wash cycle and options. Press 4 Hour Delay. Press

peak hours. START/RESUME. Close the door firmly.

All cycles.

,ok To avoid unintended use of To turn on Lock, press and hold Heated Dry for at least

your dishwasiqer, or cycle 4 seconds.

Heated_L_ry and option changes during To turn off Lock, press and hold Heated Dry for at least

a cycle. 4 seconds.

When Control Lock is lit. all buttons are disabled. If you press

any pad while your dishwasher is locked, the light flashes

3 times. The dishwasher door can be opened while the

controls are locked.

Anytime

IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the

cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle

will automatically compensate by adding time, heat and water as needed.

CONTROL PURPOSE COMMENTS

To start or resume a If the door is opened during a cycle or the power is interrupted, the StarVResume indicator

Start/ wash cycle flashes. The cycle will not resume until the START/RESUME button is pushed and the door is ....

Resume closed within 3 secondsl

To cancel wash

Cancel cycle

Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher

drain completely.

: i Tofolowthe The Clean indicator glows When a cYC e is f n shed.

Z Sk-a°n_iirz°_d°oK progress of you[ If you Select the sanitize option; When the sani Rinse CYcie is finished, the sanitize indicator

alsnwasner cycle

m C'ean glowsl If your dishwasher did not proper!y sanitize your dishes, the light flashes at the end ofthe

cycle, This can happen if the cycle is interrupted, or the wate[ could not be heated to the required

Your Jenn-Air dishwasher may have some or all of these features.

Split & FitTM Utensil Basket

The split silverware basket can be

separated and placed in various

locations in the lower rack. Load

flatware and utensils into both

sections or just one, depending on

your load.

To split the basket:

Hold the basket firmly along the sides.

Unlock the baskets.

Adjustable 2-Position Upper Rack

You can raise or lower the upper rack to fit tall items in the upper or

bottom rack. Adjusters are located on each side of the upper rack.

Each adjuster has 2 preset positions. The high and low positions

are marked on the adjuster.

To raise the rack, press both rack adjusters and lift the rack until it

is in the Up position and level.

To lower the rack,

press both rack

adjusters and slide the

rack back to its lower

position.

NOTE: The upper rack

must be level.

Removable Upper Rack

The removable rack allows you to

wash larger items such as stock

pots, roasters, and cookie sheets

in the lower level rack.

IMPORTANT: Remove dishes

prior to removing the mid level

rack from dishwasher.

To remove the rack:

1. To access track stops, pull the

rack forward until it stops and

clicks into place.

A.Trackstop

B.Track

2. To open track stops, flip the track stop to the outside of the

track.

3. After opening both track stops, slide front wheels up and out

of the slot in track. Continue to pull rack forward in track and

slide the back wheels up and out of the track.

4. Close track stops.

5. Slide rack tracks back into dishwasher.

To replace the rack:

1. Gently pull rack tracks forward in dishwasher until they stop

and click into place.

2. To open track stops, flip the track stop to the outside of the

track.

3. Place the back rack rollers on each side of the rack into the

track slot and roll the rack back into the tracks.

4. Insert front rack rollers on each side of the rack into the rack

slots.

5. Close track stops on both sides of rack and slide rack back

into dishwasher.

Light Item Clips

The light item clips hold lightweight plastic items

such as cups, lids, or bowls in place during

washing.

To move a clip:

1. Pull the clip up and off the tine.

2. Reposition the clip on another tine.

Fold-down Tines

The row of tines on the left-hand and

right-hand sides of the upper rack

can be adjusted to make room for a

variety of dishes.

To adjust the fold-down tines:

1. Grasp the tip of the tine that is in

the tine holder.

2. Gently push the tine out of the

holder.

3. Lay the tines down, toward the

center of the rack.

Yourdishwasherhasthelatesttechnologyindishwasherfiltration.Thistriplefiltrationsystemminimizessoundandoptimizeswaterand

energyconservationwhileprovidingsuperiorcleaningperformance.Throughoutthelifeofyourdishwasher,thefilterwillrequire

maintenancetosustainpeakcleaningperformance.

Thetriplefiltersystemconsistsof2parts,anupper

filterassemblyandalowerfilter.

• Theupperfilterassemblykeepsoversizeditems

andforeignobjects,alongwithveryfinefood

particles,outofthepump.

• Thelowerfilterkeepsfoodfrombeingrecirculated

ontoyourdishware.

Thefiltersmayneedtobecleanedwhen:

• VisibleobjectsorsoilsareontheUpperFilter

Assembly.

• Thereisdegradationincleaningperformance(that

is,soilsstillpresentondishes).

• Dishesfeelgrittytothetouch.

Itisveryeasytoremoveandmaintainthefilters.The

chartbelowshowstherecommendedcleaning

frequency.

Locating

Tabs

)1I1

Assembly

Lower Filter

RECOMMENDED TIME INTERVAL TO CLEAN YOUR FILTER

Number of Loads If you wash If you scrape and rinse If you only scrape If you do not scrape or rinse

Per Week before loading before loading before loading* before loading

1,3 once per year .............................once per year Twice per year Eve_ two months

4-7 once per year Once per year Twice per year Once per month

Once per year Twice per year Eve_ three months Eve_ two weeks

13-14 once per year Twice per year Every three months Once per week

*Manufacturer's recommendation: This practice will conserve the water and energy that you would have used to prepare your dishes. This

will also save you time and effort.

Very Hard Water

Ifyou have hard water (above 15 grains), clean your filter at least

once per month. Building up of white residue on your dishwasher

indicates hard water. For tips on removing spots and stains, see

"Troubleshooting" section.

Filter Removal Instructions

1. Turn the Upper Filter

Assembly 1¼turn

counterclockwise and lift

out.

2. Grasp the Lower Filter in

the circular opening, lift

slightly, and pull forward to

remove.

3. Clean the filters as shown

below.

tab

Cleaning Instructions

IMPORTANT: Do not use wire brush, scouring pad, etc. as they

may damage the filters.

Rinse filter under running water until most soils are removed. Ifyou

have hard-to-remove soils or calcium deposits from hard water, a

soft brush may be required.

To remove Upper Niter Assembly

Filter Reinstallation Instructions

Noting the previous

illustrations, place the

Lower Filter under the

Locating Tabs in the

bottom of the dishwasher

so the round opening for

the Upper Filter Assembly

lines up with the round

opening in the bottom of

the tub.

tab

To replace Upper Filter Assembly

Insert the Upper Filter Assembly into the circular opening in

the Lower Filter.

Slowly rotate the filter clockwise until it drops into place.

Continue to rotate until the filter is locked into place. If the

filter is not fully seated (still turns freely), continue to turn

the filter clockwise until it drops and locks into place.

NOTE: The Upper Filter Assembly arrow does not have to

align with the arrow in the Lower Filter as long as the filter is

locked.

IMPORTANT: To avoid damage to dishwasher, do not operate your

dishwasher without the filters properly installed. Be sure the Lower

Filter is securely in place and the Upper Filter Assembly is locked

into place. If the Upper Filter Assembly turns freely, it is not locked

into place.

Cleaning the Dishwasher

Clean the exterior of the dishwasher with a soft, damp cloth and

mild detergent. If your dishwasher has a stainless steel exterior, a

stainless steel cleaner is recommended - Stainless Steel Cleaner

and Polish Part Number 31462.

Clean the interior of the dishwasher, with a paste of powdered

dishwasher detergent and water or use liquid dishwasher detergent

on a damp sponge to clean the cooled-down interior.

A white vinegar rinse may remove white spots and film. Vinegar is

an acid, and using it too often could damage your dishwasher.

Put 2 cups (500 mL) white vinegar in a glass or dishwasher-safe

measuring cup on the bottom rack. Run the dishwasher through a

complete washing cycle using an air-dry or an energy-saving dry

option. Do not use detergent. Vinegar will mix with the wash water.

If you have a drain air gap,

check and clean it if the

dishwasher isn't draining

well.

Storing the Dishwasher

If you will not be using the dishwasher during the summer months,

turn off the water and power supply to the dishwasher. In the

winter, if the dishwasher could be exposed to near freezing

temperatures or is left in aseasonal dwelling such as a second

home or vacation home, avoid water damage by having your

dishwasher winterized by authorized service personnel.

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

Inthe U.S.A., www.jennair.com In Canada, www.jennair.ca

Dishwasher is not operating properly

• Dishwasher does not run or stops during a cycle

Is the door closed tightly and latched? Press START/RESUME

and close the door within 3 seconds.

Is the right cycle selected?

Is there power to the dishwasher? Has a household fuse blown,

or has a circuit breaker tripped? Replace the fuse or reset the

circuit breaker. If the problem continues, call an electrician.

Has the motor stopped due to an overload? The motor

automatically resets itself within a few minutes. If it does not

restart, call for service.

Is the water shutoff valve (if installed) turned on?

It is normal for certain cycles to repeatedly pause for several

seconds during the main wash.

• The Clean light is flashing

Check the following:

• Is the overfill protection float able to move up and down

freely? Press down to release.

• Be sure the water supply is turned on to the dishwasher.

(This is very important following the new installation of

your dishwasher.)

• Check for suds in the dishwasher. If foam or suds are

detected by the dishwasher sensing system, the

dishwasher may not operate properly or may not fill with

water.

Suds can come from:

1. Using the incorrect type of detergent, such as

laundry detergent, hand soap, or dish detergent for

hand washing dishes.

2. Forgetting to replace the rinse aid dispenser cap

after filling (or refilling) the rinse aid.

3. Using an excessive amount of dishwasher detergent.

• Dishwasher will not fill

Is the overfill protection float able to

move up and down freely? Press down

to release.

Dishwasher seems to run too long

Try the 1 Hour Wash cycle.

The dishwasher can run up to 31/2hours depending on soil

level, water temperature, cycles and options.

Is the water supplied to the dishwasher hot enough? The

dishwasher runs longer while heating water.

Is the dishwasher cycle time within the cycle times? See cycle

sections wash times. A delay automatically occurs in some

wash and rinse cycles until the water reaches the proper

temperature.

This dishwasher is equipped with an optical sensor wash that

detects water temperature, soil and detergent amount. Wash

cycles are adjusted based on what is sensed.

IMPORTANT: The very first wash cycle after installation in your

home will be adjusted to include an additional 2 rinses. This

cycle must not be interrupted for proper sensor adjustment. If

this adjustment cycle is canceled or stopped before the Clean

light comes on at the end of the cycle, the next wash cycle will

repeat this sensor adjustment.

Water remains in the dishwasher

Is the cycle complete?

Was the disposer knockout plug removed during installation?

(See "Install the drain hose" section in the Installation

Instructions.)

• Detergent remains in the covered section of the dispenser

Is the cycle complete?

Check for items such as cookie sheets, cutting boards, or large

containers that may be blocking the detergent dispenser from

opening properly.

Be sure the cycle has finished (green light is on). If it has not

finished, you will need to resume the cycle by pressing START/

RESUME and closing the door within 3 seconds.

Is the detergent lump-free? Replace detergent if necessary.

• White residue on the front of the access panel

Was too much detergent used?

Is the brand of detergent making excess foam? Try a different

brand to reduce foaming and eliminate buildup.

• Odor in the dishwasher

Are dishes washed only every 2 or 3 days? Run a rinse cycle

once or twice a day until you have a full load.

Does the dishwasher have a new plastic smell? Run a vinegar

rinse as described in "Dishwasher Care."

Condensation on the kitchen counter (built-in models)

Is the dishwasher aligned with the countertop? Moisture from

the vent in the dishwasher console can form on the counter.

Refer to the Installation Instructions for more information.

Dishes do not dry completely

• Dishes do not dry completely

Did you use a rinse aid? Your dishwasher is designed to use

rinse aid for good drying performance. Without rinse aid your

dishes and dishwasher interior will have excessive moisture.

The heat dry option will not perform as well without rinse aid.

• Dishes are not dry

Did you load your dishwasher to allow proper water drainage?

Do not overload. Use a liquid rinse aid to speed drying.

Are the plastics wet? Plastics often need towel drying.

Is the rinse aid dispenser empty?

Did you use an air-dry or energy-saving dry option? Use a

heated drying option for dryer dishes.

• Excess moisture on racks and dishwasher interior

Check the rinse aid indicator to see that there is rinse aid in the

dispenser.

Spotsandstainsondishes

Spotting and filming on dishes

Is your water hard, or is there a high mineral content in your

water? Conditioning the final rinse water with a liquid rinse aid

helps eliminate spotting and filming. Keep the rinse aid

dispenser filled. Always use a high-temp option. Ifyour water

hardness is 13 grains or above, it is strongly recommended that

you install a home water softener. If you do not wish to drink

softened water, have the softener installed onto your hot water

supply.

Is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.

Did you use the correct amount of effective detergent? Use

recommended dishwasher detergents only. Do not use less

than 1 tbs (15 g) per load. Detergent must be fresh to be

effective. Heavy soil and/or hard water generally require extra

detergent.

Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to

828 kPa) for proper dishwasher fill. Ifyou have questions about

your water pressure, call a licensed, qualified plumber.

NOTE: To remove spots and film from glassware, remove all

silverware and metal items and run a vinegar rinse as described

in "Dishwasher Care."

Silica film or etching (silica film is a milky, rainbow-colored

deposit; etching is a cloudy film)

Sometimes there is a water/chemical reaction with certain

types of glassware. This is usually caused by some

combination of soft or softened water, alkaline washing

solutions, insufficient rinsing, overloading the dishwasher, and

the heat of drying. It might not be possible to avoid the

problem, except by hand washing.

To slow this process use a minimum amount of detergent but

not less than 1 tbs (15 g) per load. Use a liquid rinse aid and

underload the dishwasher to allow thorough rinsing. Silica film

and etching are permanent and cannot be removed. Do not use

heated drying.

• White spots on cookware with nonstick finish

Has the dishwasher detergent removed cookware seasoning?

Reseason cookware after washing it in the dishwasher.

• Brown stains on dishes and dishwasher interior

Does your water have high iron content? Rewash dishes using

1-3 tsp (5-15 mL) of citric acid crystals added to the covered

section of the detergent dispenser. Do not use detergent.

Follow with a Normal wash cycle with detergent. If treatment is

needed more often than every other month, the installation of

an iron removal unit is suggested.

Black or gray marks on dishes

Are aluminum items rubbing dishes during washing?

Disposable aluminum items can break down in the dishwasher

and cause marking. Hand wash these items. Remove

aluminum markings by using a mild abrasive cleaner.

Orange stains on plastic dishes or dishwasher interior

Are large amounts of tomato-based foods on dishes placed in

the dishwasher? It may be necessary to use a stain removal

product to remove stains from your dishwasher. Stains will not

affect dishwasher performance.

Noises

Grinding, grating, crunching or buzzing sounds

A hard object has entered the wash module (on some models).

When the object is ground up, the sound should stop. If the

noise persists after a complete cycle, call for service.

Dishes are not completely clean

• Food soil left on the dishes

Is the dishwasher loaded correctly?

Did you choose the cycle that describes the most difficult soil in

your dishwasher? Ifyou have some items with heavier soils,

use a heavier cycle.

Is the water temperature too low? For best dishwashing results,

water should be 120°F (49°C) as it enters the dishwasher.

Did you use the correct amount of fresh detergent? Use

recommended dishwasher detergents only. Do not use less

than 1 tbs (15 g) per load. Detergent must be fresh to be

effective. Heavy soil and/or hard water generally require extra

detergent.

Is detergent caked in dispenser? Use fresh detergent only. Do

not allow detergent to sit for several hours in a wet dispenser.

Clean dispenser when caked detergent is present.

Is the pump or spray arm clogged by labels from bottles and

cans?

Is the home water pressure high enough for proper dishwasher

filling? Home water pressure should be 20 to 120 psi (138 to

828 kPa) for proper dishwasher fill. If you have questions about

your water pressure, call a licensed, qualified plumber.

Are high suds slowing the wash arm? Do not use soap or

laundry detergents. Use recommended dishwasher detergents

only.

Dishes in the PROSORUB ®wash area are not clean

Are the dishes loaded to face the PROSCRUB ®spray jets?

Load soiled dish surfaces to face the back of the dishwasher

toward the PROSCRUB ®spray jets. Tilt the dishes toward the

back so water can drain from surfaces, and the lower spray

arm can wash the item from below.

NOTE: Loaded items may shift when dish racks are pushed

into the dishwasher. Make sure dishes do not interfere with the

spray arms, water feed tube, or PROSCRUB ®spray jets.

Are items loaded so they do not overlap? Load items only one

row deep without any overlap so that the PROSCRUB ®spray

jets can reach all surfaces.

Dishes are damaged during a cycle

Chipping of dishes

Did you load the dishwasher properly? Load the dishes and

glasses so they are stable and do not strike together from

washing action. Minimize chipping by moving the rack in and

out slowly.

NOTE: Antiques, feather-edged crystal, and similar types of

china and glassware might be too delicate for automatic

dishwashing. Wash by hand.

JENN-AII DISHWASHERWARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Jenn-Air brand of Maytag Corporation or Maytag Limited (hereafter "Jenn-Air") will pay for factory specified

replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Jenn-Air designated

service company. This limited warranty applies only when the major appliance is used in the country in which it is purchased.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CERTAIN COMPONENT PARTS

In the second through the fifth year from the date of purchase, when your major appliance is installed, operated and maintained according

to instructions attached to or furnished with the product, Jenn-Air will pay for factory specified parts for the following components if

defective in materials or workmanship: dish racks, all parts of the wash system, drain motor, electronic controls and heating element.

Replacements parts will also be provided if there is rust including the exterior cabinet and front panels.

LIFETIME LIMITED WARRANTY ON STAINLESS STEEL TUB OR PLASTIC TUB AND INNER DOOR

For the lifetime of the product from the date of purchase, when your major appliance is installed, operated and maintained according to

instructions attached to or furnished with the product, Jenn-Air will pay to replace the dishwasher with the same or similar model if the tub

is defective in materials or workmanship or replace the door liner if it is found to be defective in materials or workmanship.

ITEMS JENN-AIR WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair

house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance

with electrical or plumbing codes, or use of products not approved by Jenn-Air.

5. Replacement parts or repair labor costs for units operated outside the United States or Canada.

6. Pickup and delivery. This major appliance is designed to be repaired in the home.

7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

8. Expenses for travel and transportation for product service in remote locations.

9. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

10. Replacement parts or repair labor costs when the major appliance is used in a country other than the country in which it was

purchased.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. JENN-AIR SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS,

SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND

YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Jenn-Air dealer to determine if another

warranty applies. 6/07

For additional product information, in the U.S.A., visit www.jennair.com

In Canada, visit www.jennair.ca

Ifyou do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may

contact Jenn-Air at the number below.

Have your complete model number ready. You can find your model number and serial number on the label located near the door on the

right-hand or left-hand side of the dishwasher interior.

For assistance or service in the U.S.A., call 1-800-688-1100. In Canada, call 1-800-807-6777.

Ifyou need further assistance, you can write to Jenn-Air with any questions or concerns at the address below:

In the U.S.A.: In Canada:

Jenn-Air Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Jenn-Air Brand Home Appliances

Customer eXperience Centre

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please keep these User Instructions and model number information for future reference.

W10208700A

SP W10208701A

5/09

Printed in U.S.A.

Nous vous REMERCIONS d'avoir achete ce produit de haute qualite. Si vous rencontrez un probl_me non mentionne dans la

section DI_PANNAGE,veuillez visiter notre site www.jennair.com pour des informations suppl6mentaires. Si vous avez toujours

besoin d'assistance, veuillez nous tel6phoner au 1-800-688-1100. Au Canada, visitez notre site www.jennair.ca ou tel6phonez-

nous au 1-800-807-6777.

Vous aurez besoin de vos numeros de modele et de serie situ6s pres de la porte sur le c6te droit ou gauche, A I'int@ieurdu

lave-vaisselle.

Table des mati res

SECURITE DU LAVE-VAISSELLE ............................................. 1

I_TAPES RAPIDES ...................................................................... 3

UTILISATION DU LAVE-VAISSELLE ........................................ 3

DESCRIPTION DES PROGRAMMES ET DES OPTIONS ....... 5

CARACTI_RISTIQUES DU LAVE-VAISSELLE .......................... 7

SYSTEME DE FILTRATION ....................................................... 8

ENTRETIEN DU LAVE-VAISSELLE .......................................... 9

DCPANNAGE ............................................................................ 10

GARANTIE ................................................................................ 13

Votre securite et celle des autres est tres importante.

Nous donnons de nombreux messages de securite importants dans ce manuel et sur votre appareil menager. Assurez-vous de

toujours lire tousles messages de securite et de vous y conformer.

Voici le symbole d'alerte de securite.

Ce symbole d'alerte de securite vous signale les dangers potentiels de deces et de blessures graves a vous

eta d'autres.

Tousles messages de securite suivront le symbole d'alerte de securite et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient •

Risque possible de d_ces ou de blessure grave si vous ne

suivez pas imm_diatement les instructions.

Risque possible de d_ces ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de securite vous diront quel est le danger potentiel et vous disent comment reduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

W10208700A

IMPORTANTES INSTRUCTIONS DE SI_CURITI_

AVERTISSEMENT : Lors de I'utilisation du lave-vaisselle, suivre les precautions el6mentaires dont les suivantes :

[] Lire la totalite des instructions avant d'utiliser le

lave-vaisselle.

[] N'utiliser le lave-vaisselle que pour laver la vaisselle.

[] Utiliser uniquement les detersifs ou agents de rin(;age

recommandes pour lave-vaisselle et les garder hors de la

portee des enfants.

[] Lorsque vous chargez le lave-vaisselle :

1) Placer les objets coupants de fa(;on qu'ils ne puissent

endommager le joint de la porte; et

2) Placer les couteaux le manche vers le haut de fa(;on & ne

pas vous couper.

[] Ne pas laver d'articles en plastique & moins qu'ils nesoient

marques "Peut aller au lave-vaisselle" ou I'equivalent. Si

I'article ne porte aucune indication, verifier aupres du

fabricant.

[] Ne pas toucher I'el6ment chauffant pendant le

fonctionnement ou immediatement apres.

[] Ne pas faire fonctionner le lave-vaisselle si tousles

panneaux de I'enceinte ne sont pas en place.

[] Ne pas jouer avec les commandes.

[] Ne pas abuser, vous asseoir ni monter sur la porte,

le couvercle ou les paniers du lave-vaisselle.

[] Pour eviter tout risque d'accident, ne pas laisser les

enfants jouer dans ou sur le lave-vaisselle.

[] Sous certaines conditions, de I'hydrogene peut se former

dans un reseau d'eau chaude inutilise depuis deux

semaines ou plus. L'HYDROG#NE EST UN GAZ

EXPLOSIBLE. Si le systeme d'eau chaude n'a pas et6

utilise depuis un certain temps, laisser couler I'eau chaude

des robinets pendant quelques minutes avant de faire

fonctionner le lave-vaisselle. Cette mesure permettra &

I'hydrogene de s'evaporer. Ce gaz etant inflammable, ne

pas fumer ni utiliser de flamme nue pendant cette periode.

[] Enlever la porte ou le couvercle du compartiment de lavage

Iorsque vous remplacez ou mettez au rebut un vieux

lave-vaisselle.

CONSERVEZ CES INSTRUCTIONS

iNSTRUCTiONS DE MISE A LA TERRE

Pour un lave=vaisselle reli6 & la terre, branch6 avec un

cordon :

Le lave-vaisselle doit etre relic A la terre. En cas d'un

mauvais fonctionnement ou d'une panne, la raise & terre

reduira le risque d'un choc electrique en fournissant le moins

de resistance pour le courant electrique. Le lave-vaisselle est

equipe d'un cordon avec un conducteur pour relier les

appareils & la terre et d'une fiche de raise &la terre. La fiche

doit etre branchee sur une prise appropriee, installee et reliee

& la terre conformement aux codes et reglements Iocaux.

AVERTiSSEMENT : La connexion incorrecte du

conducteur pour relier les appareils & la terre peut causer le

risque de choc electrique. Verifier avec un electricien

competent ou un representant de service si vous avez

des doutes si le lave-vaisselle est correctement relic & la

terre. Ne pas modifier la fiche fournie avec le lave-

vaisselle; si elle n'entre pas dans la prise, faire installer

une prise appropriee par un electricien competent.

Pour un lave=vaisselle branch_ en permanence :

Le lave-vaisselle doit etre branche &un systeme

d'installation electrique permanent en metal relic & la

terre, ou un conducteur pour relier les appareils & la terre

doit etre relic avec les conducteurs du circuit et branche

&une borne pour relier les appareils & la terre ou au

cordon d'alimentation electrique avec le lave-vaisselle.

CONSERVEZ CES iNSTRUCTiONS

Risque de basculement

Ne pas utiliser le lave-vaisselle jusqu'& ce qu'il soit compl_tement installS.

Ne pas appuyer sur la porte ouverte.

Le non-respect de ces instructions peut causer des blessures graves ou des coupures.

Pr6parer et _

charger le _

lave-vaisselle.

2 Verser le ,__//,,

d6tergentpour le ._.-.,

nettoyage et

I'agent de ringage

pour le s6chage.

S61ectionner un programme et une option.

(Les programmes et les options changent selon le

module.)

EVERYDAY CYCLES

ENTERTAINMENT CYCLES __

OPTIONS

_ Mettre en marche le lave-

vaisselle, start/

Resume

REMARQUE : Si le bouton START/

RESUME (mise en marche/reprise)

se trouve au sommet de la porte,

bien fermer la porte dans les

3 secondes qui suivent I'appui sur

la touche START/RESUME.

fisc£o du s e

Pr6paration et chargement du lave-vaisselle

IMPORTANT : Enlever de la vaisselle les restes alimentaires, os,

cure-dents et autres articles durs. Enlever les etiquettes des

r6cipients avant de les laver.

Disposition pour service de 10 couverts

Panier superieur Panierinferieur

Disposition pour service de 12 couverts

Panier superieur

Panier inferieur

S'assurer que rien n'emp6che le(s) bras

d'aspersion de tourner librement. II est

important que lejet d'eau atteigne toutes

les surfaces sales.

• V6rifier que Iorsque la porte du lave-vaisselle est ferm6e, aucun

article ne bloque le distributeur de d6tergent.

• Charger dans le panier les articles en orientant la surface sale

vers le bas et vers I'int6rieur, vers le bras d'aspersion, tel

qu'illustr6. Ceci am61iorera les r6sultats de nettoyage et de

s6chage.

• #viter le chevauchement d'articles tels que les bols ou les

assiettes pouvant retenir les aliments.

• Placer les articles de plastique, les petites assiettes et les

verres dans le panier sup6rieur. Ne laver des articles de

plastique au lave-vaisselle que s'ils sont identifi6s comme

"lavable au lave-vaisselle".

Pour 6viter les bruits de choc et d'entrechoc durant le

fonctionnement : Charger la vaisselle pour que les articles ne

se touchent pas les uns les autres. S'assurer que les articles

16gerssont bien retenus dans les paniers.

Lors du chargement des couverts, toujours

charger les articles ac6r6s point6s vers le bas.

Orienter certains articles vers le haut et

d'autres vers le bas Iorsqu'on les place

ensemble.

I_TAPE 2

Verser le d6tergent.

REMARQUE : Si vous n'avez pas I'intention d'effectuer un

programme de lavage dans I'imm6diat, ex6cuter un programme de

ringage. Ne pas utiliser de d6tergent.

• Utiliser uniquement du d6tergent pour lave-vaisselle

automatique. Verser le d6tergent en poudre, liquide ou en

pastille, juste avant de d6marrer un programme.

Pour I'obtention de

meilleurs r6sultats,

il est recommand6

d'utiliser un

d6tergent & lave-

vaisselle

automatique frais.

Conserver le

r6cipient du

d6tergent bien

ferm6 dans un lieu

sec et frais.

A. Loquet du couvercle

B. Section de lavage principal

C. Section du prelavage

• La quantit6de

d6tergent & utiliser d6pend des 616ments suivants :

Degr6 de salete de la vaisselle - Les charges tr_s sales

n6cessitent plus de d6tergent.

Duret6 de I'eau - Si on n'utilise pas assez de detergent dans

une eau dure, la vaisselle ne sera pas parfaitement lav6e. Si on

utilise trop de d6tergent dans une eau douce, la solution

attaquera les articles en verre.

Eau douce &moyenne (0 &6 grains par gallon U.S.)

[eau venant d'un adoucisseur d'eau g6n6ral et eau du

service d'eau de la ville]

Eau moyenne a dure (7 & 12 grains par gallon U.S.)

[eau de puits et du service d'eau de la ville]

• Selon la durete de I'eau, remplir la section de lavage principal

du distributeur tel qu'illustr& Remplir la section de pr61avage

jusqu'au niveau indiqu& si n6cessaire.

REMARQUE : Les quantites _HardWater

indiqu6es correspondent & Xs°ftwater HardWater

I'emploi d'un d6tergent en softwater

poudre standard. Lors de

I'utilisation d'un autre Lavageprincipal Pr_lavage

d6tergent pour lave-vaisselle, proc6der conform6ment aux

instructions indiqu6es sur I'emballage.

Verser I'agent de ringage

Votre lave-vaisselle est congu pour utiliser un agent de ringage

pour un s6chage satisfaisant. Sans agent de ringage, la

vaisselle et I'int6rieur du lave-vaisselle seront trop humides.

L'option de s6chage avec chaleur ne fonctionnera pas de

maniere optimale sans agent de ringage.

• Les agents de ringage empechent I'eau de former

des gouttelettes qui peuvent s6cher en laissant des _ Full

taches ou coulees. IIs ameliorent egalement le

s6chage en permettant & I'eau de s'6couler de la

vaisselle apr_s le ringage final.

• Les agents de ringage aident &reduire I'exces kYJAdd

d'humidit6 sur les paniers & vaisselle et & I'int6rieur

du lave-vaisselle.

• Contr61er le niveau d'agent de ringage dans le distributeur.

Ajouter de I'agent de ringage Iorsque I'indicateur est au niveau

"Refill" (remplir).

• Pour ajouter de I'agent de ringage,

tourner le bouchon du distributeur

dans le sens antihoraire jusqu'& Refill

et le soulever. Verser I'agent de

ringage dans I'ouverture jusqu'& ce

que I'indicateur soit sur "Full" (plein).

Remettre en place le bouchon du

distributeur et le tourner dans le sens

horaire. Verifier qu'il est bien

verrouill&

REMARQUE : Pour une majorit6 de

types d'eau, le reglage effectu6 &

I'usine & 2 donnera de bons r6sultats.

Si I'eau du domicile est dure ou si on

remarque la presence d'anneaux ou

de taches, essayer un reglage plus

61ev& Tourner I'ajusteur & fleche &

I'int6rieur du distributeur soit & la main,

soit en ins6rant un tournevis & lame

plate au centre de la fleche et en

tournant.

Lock

tour pour verrouiller

S61ectionner un programme (les programmes varient

selon les modules)

Voir les tableaux "Description des programmes et des options"

dans la section qui suit.

Les programmes plus intenses et les options modifient la dur6e du

programme. Uexecution de certains programmes et options

prendra jusqu'& 3 heures et demie.

EVERYDAY CYCLES

ENTERTAINMENT CYCLES --

S61ectionner les options (les options varient selon le

module).

Voir les tableaux "Description des programmes et des options"

dans la section qui suit.

On peut personnaliser les programmes en appuyant sur les options

d6sir6es.

OPTIONS

€:TAPE 4

Commencer ou reprendre un programme

• Laisser I'eau couler du robinet le plus pres du

lave-vaisselle jusqu'& ce qu'elle soit chaude.

Fermer I'eau.

Start /

Resume

• Appuyer sur Start/Resume dans les 3 secondes qui suivent et

fermer la porte. Le verrou de la porte s'engage

automatiquement. Appuyer sur START/RESUME (mise en

marche/reprise) pour reprendre le meme programme et les

memes options que Iors du programme precedent.

• On peut ajouter un article &n'importe quel moment avant le

debut du lavage principal. Ouvrir la porte lentement et ajouter

I'article. Appuyer sur START/RESUME et fermer la porte dans

les 3 secondes qui suivent.

EVERYDAYCYCLES ENTERTAINMENTCYCLES__ OPTIONS _ ContrdLock

Ces informations couvrent plusieurs modeles diff6rents. Votre lave-vaisselle peut ne pas comporter tous les programmes et options

d6crits.

PRO- TYPES DE CHARGE DE DESCRIPTIONS

GRAMMES VAISSELLE

DURleE DE LAVAGE (HH:MM)

Pro- Programme + *Dur6e

gramme options maximum

minimum minimum

uti!iser p0Ur routes les Congu pour s61ectionner ia qUantit6 2:1! 2:35 3:07

Sensor charges ayant des quantit6s d'eau la p!us appropri6e pour le niveau

I Wash I de salet6s importantes de salet6 de chaque chargel

norma!es ou !6g_resl

I HeavyWa,,I

Utiliser ce programme pour

les casseroles, les po61es et

la vaisselle ordinaire difficiles

&nettoyer et tr@ssales.

Ce programme utilise la dur6e, le volume

d'eau et la chaleur maximum.

1:39 2:09 3:30

. Utiliser ce pr0gramme pour u6tiquette de consommation d'6nergie i:11 1:41 3:30

Normal des charges comportantdes. ; est bas6e sur ce programme Lorsdu, , '.

Wash quantltes normales de debr!s !avage, I achon de lavage fera des pauses

a!imentaires, r6p6t6es pendant que!ques secondes,

I China/(Crystal I

Utiliser ce programme pour

les articles 16gerement sales

ou pour la porcelaine ou le

cristal.

Lors du lavage, I'action de lavage fera

des pauses r6p6t6es pendant quelques

secondes.

1:17 1:47 2:51

LorsqU'on s0uhaite obtenir Ce programme n'effectue pas de 0:59 0:88 0:88

des r6su!tats plus s6chage. Pou,r un meilleur s6chage,

1WashHOUr rapdement, opton Lavage s6ect onner opton Heated Dry

enl heure consomme (s6chage avec chaleur), ajouter 1/2heure

16g@rementP!USd'eau et au programme de lavage,

d'6nergie,

Utilisation pour des charges Le programme de rechauffeur de plat 0:37 0.37 0:37

Plate I des plats propres et pour chauffera 12 plats de diner propres &une

Warmer I garder les aliments chauds temp6rature chaude. Rappelez-vous

plus Iongtemps en les servant quand enlevant les articles du lave-

dans un plat chaud, vaisselle ils seront chauds.

Vous pouvez personnaliser vos programmes en appuyant sur une option.

Voir les s61ections d'options. Si vous changez d'avis, appuyez sur cette option &nouveau pour la d6sactiver, ou s61ectionnez une option

differente si d6sir& Vous pouvez changer une option en tout temps avant que I'option choisie ne commence.

*Les dur6es maximum de lavage d6pendent de la temp6rature de I'eau, de la salet6, de la taille de la charge de vaisselle et des options

s61ectionn6es.

OPTIONS TYPES DE CHARGE DE DESCRIPTIONS UTILISER AVEC :

VAISSELLE

Utilisation p0Ui de petites Pour p!us de commodit6, & utiliser pour laver une petite Lavage sensor(par

charges, charge des plats dans le support sup6rieur, d6tection), Heavy

Top (intense), Norma!,

Rack

China/Crystal

..................................................................................................................................................................... (porcelaine!cristal) ou

1Hour (1 heure)

Utilisation pour des L'option Steam (vapeur) ajoute de la vapeur a un Programme de lavage

i charges avec des programme. Lors du ringage final, cette option porte la Heavy (intense) ouSteamClean quantites normales de temp6rature de I'eau & environ 155°F (68°C). Cette option Normal.

r6sidus alimentaires, augmente le niveau de chaleur et la dur6e du programme.

OPTIONS TYPES DE CHARGE DE DESCRIPTIONS UTILISER AVEC :

VAISSELLE

charges Contenant des Augmente la temp6rature cible de I'eaU durant les 6tapes de Programme de lavage

Super I aliments tenaces ayant lavage du programme. Heavy (intense) ou

Sc_-ub J adh6re: &la vaisse!!e apres Augmente !e niveau de cha!eur, !a duree de lavage et le Normal,

une CUlss°n au I°ur. volume d,eau du programmel

Sanitize ]

Pour assainir la vaisselle et

la verrerie conformement &

la norme 184 NSF/ANSI

pour lave-vaisselle

residentiels.

Lors du rin£_agefinal, la temp6rature de I'eau s'61eve &

environ 155°F (68°C). Ce rin(_age a haute temperature

assainit la vaisselle et la verrerie conform6ment & la norme

184 NSF/ANSI pour lave-vaisselle residentiels.

Les lave-vaisselle residentiels certifies ne sont pas destines

aux etablissements alimentaires autoris6s.

L'option Sanitize (assainissement) ou Sani Rinse (rin£)age

sanitaire) augmente le niveau de chaleur et la duree du

programme.

Programme de lavage

normal

Le programme Heavy

Wash (lavage intense)

utilise automatiquement

Sanitize

(assainissement). Seuls

ces programmes

d'assainissement ont

et6 con£)us pour

repondre aux exigences

de la norme NSF/ANSI.

s_chage aVec cha!eur ARRETER le lave-VaisSelle quand ia charge Contient de la Tousles programmes

pour les mei!!eurs resu!tat s vaisselle en p!astique qui peut 6tr e sensible a des automatiques avec tous

de s6chage, temp6ratures 6!ev6es, les programmes de

lavage &moins qu'on ne

................................................................ Cette opt on avec ut isation dun agent de ringage fournira, ^

arrete

!e mei!!eur rendement de sechage. :

I 4 Hour

Delay

S61ectionner ce

programme pour faire

fonctionner votre lave-

vaisselle plus tard ou en

dehors des heures de

pointe.

Differe la mise en marche d'un programme jusqu'& 4 heures.

Choisir un programme de lavage et les options. Appuyer sur

Delay (mise en marche diff6r6e). Appuyer sur Start/Resume

(mise en marche/reprise). Bien fermer la porte.

Tousles programmes.

IMPORTANT : Le d6tecteur incorpore au lave-vaisselle contr61e le degr6 de salet& La dur6e du programme etiou la consommation d'eau

peuvent varier 6tant donn6 que le d6tecteur rajuste le programme pour assurer des performances de lavage optimales. Si la temp6rature

de I'eau d'arriv6e est inf6rieure & celle recommand6e ou que la vaisselle est tres sale, le programme compensera automatiquement en

allongeant la dur6e du programme et en augmentant la quantit6 d'eau et le chauffage, au besoin.

COM- ROLE COMMENTAIRES

MANDE

Pour Commencer ou Si I,on oUvre la porte durant un programme ou si Une panne de Courant se produit, le t6moin

Start/ reprendre un !umineux Start!Resume (mise en marche)clignote. Le programme ne reprend pas avant que I'on

Resume programme de a t appuye sure bouton START/RESUME (m se en marche/repr se) et que a porte a t ete ferm6e

lavage dans les 3 secondes qui suivent,

Pour annuler le

Cancel programme de

lavage

Fermez la porte fermement. Le lave-vaisselle commence une vidange de 2 minutes (si

n6cessaire). Laissez le lave-vaisselle vidanger completement.

COM- ROLE COMMENTAIRES

MANDE

, PoUrsuvre a L' ndcateurCean (propre) s'a ume orsqu'un programme est term n6

m Lontro ock • J

Santzed progression au Si vous s61ectionnez !'option Sanitize (assainissement) Iorsque !e programme Sanitize est ....

programme de v0tre termin6' le t6moin Sanitized s'allumel Si le lave-vaisse!!e n'a pas assaini ia vaisse!le Comme il

m clea! !ave_vaisse!!e convient, !e t6moin c!ignote &la fin du pr0gramme. Ceci peut se produire Iorsque

ue vous ouvrez ou fermez !a sur CANCEL

Votre lave-vaisselle Jenn-Air peut comporter toutes ces caract_ristiques ou seulement certaines d'entre elles.

Panier a ustensiles Split & FitTM

Le panier &couverts divis6 peut

_tre retire et place &des endroits

differents dans le panier inferieur.

Charger les couverts et les

ustensiles dans les deux sections

ou dans une seule, selon la charge.

Pour s_parer le panier :

Maintenir fermement le panier de chaque

c6t& D6bloquer les paniers.

Panier sup_rieur r_glable a 2 positions

On peut lever ou baisser le panier interm6diaire pour mettre de

grands articles dans le panier interm6diaire ou inf6rieur. Les

regleurs sont situ6s de chaque c6t6 du panier interm6diaire.

Chaque r6glage comporte 2 positions pr6r6gl6es. Les positions

hautes et basses sont indiqu6es sur le regleur.

Pour soulever le panier, appuyer sur les deux r6gleurs du panier et

soulever le panier jusqu'& ce qu'il soit en position haute et

d'aplomb.

Pour abaisser le

panier, appuyer sur les

deux r6gleurs du

panier et glisser le

panier &sa position la

plus basse.

REMARQUE : Le

panier intermediaire

doit _tre d'aplomb.

Panier amovible interm_diaire et panier amovible pour

ustensiles de cuisson

Les paniers amovibles permettent A

de laver des articles de plus

grande taille tels que marmites,

r6tissoires et t61es a biscuits dans

le panier de niveau inf6rieur.

IMPORTANT • Oter la vaisselle B

avant de retirer le panier de niveau

interm6diaire du lave-vaisselle.

A.Butee d'arr#t

Pour enlever le panier : S.Glissiere

1. Pour acceder aux butees

d'arr_t, tirer le partier vers

I'avant jusqu'& I'arr_t et jusqu'& ce qu'il s'enclenche en place.

2. Pour ouvrir les but6es d'arr_t, relever la but6e d'arr_t vers

I'ext6rieur de la glissiere.

3. Apres ouverture des deux butees d'arr6t, faire glisser les roues

avant vers le haut pour les sortir de la fente dans la glissiere.

Continuer &tirer le panier vers I'avant et faire glisser les roues

arriere vers le haut pour les sortir de la glissiere.

4. Fermer les but6es d'arr_t.

5. Faire glisser les but6es de panier pour les r6installer dans le

lave-vaisselle.

Pour r_installer le panier

1. Tirer doucement les but6es du panier vers I'avant dans le lave-

vaisselle jusqu'& I'arr_t et jusqu'& ce qu'elles s'enclenchent en

place.

2. Pour ouvrir les buttes d'arr_t, relever la butte d'arr_t vers

I'ext_rieur de la glissiere.

3. Placer les roulettes arriere du panier de chaque c6te du panier

dans la fente de la glissiere et faire rouler le panier pour le

reinstaller dans les glissieres.

4. Inserer les roulettes avant du panier de chaque c6t_ du panier

dans les fentes du panier.

5. Fermer les buttes d'arr_t des deux c6tes du panier et faire

glisser le panier pour le reinstaller dans le lave-vaisselle.

Attaches pour articles 16gets

Les attaches maintiennent les articles I_gers en

plastique tels que les tasses, couvercles ou bols en

place pendant le lavage.

Pour d_placer une attache :

1. Tirer I'attache vers le haut pour la s_parer de la

tige.

2. R_installer I'attache sur une autre tige.

Tigesflexibles

Larangeedetigessurlesc6t6s&

gaucheet&droitedupanier

interm6diairepeut_trer6gl6epour

fairedelaplacepourdiversarticles

devaisselle.

Pour ajuster les tiges rabattables :

1. Saisir la pointe de la tige qui se trouve dans le support de la

tige.

2. Pousser doucement la tige & I'ext6rieur du support de la tige.

3. Rabattre les tiges vers le centre du panier.

st6sr'}e de @K: lOI

Ce lave-vaisselle comporte la technologie la plus recente en matiere de filtration, ke systeme &triple filtration minimise le bruit et optimise

la conservation d'eau et d'6nergie, tout en fournissant une performance de nettoyage sup6rieure. Durant toute la vie du lave-vaisselle le

filtre n6cessitera I'entretien appropri6 pour le maintien de la performance de nettoyage optimale.

Le systeme &triple filtration comprend deux parties • le filtre

sup6rieur et le filtre inf6rieur.

• Le filtre sup6rieur retient les d6bris alimentaires et objets

6trangers de grande taille ainsi que les particules

alimentaires tr_s fines, et les emp_che d'atteindre la

pompe.

• Le filtre inferieur retient les d6bris alimentaires et les

emp_che de circuler avec I'eau du lave-vaisselle.

II peut _tre n6cessaire de nettoyer les filtres a certaines

occasions :

• Pr6sence d'objets et souillures dans le filtre sup6rieur.

• D6gradation de la performance de lavage (pr6sence de

r6sidus et souillures sur la vaisselle).

• Perception de rugosit6 au toucher sur les surfaces de la

vaisselle.

II est tres facile de retirer et d'entretenir les filtres. Le tableau

ci-dessous indique la fr6quence de nettoyage recommand6e

pour les filtres.

Fittre

sup#rieur ..............

IPattes de

positionnement

..........

INTERVALLES DE NETTOYAGE RECOMMANDES POUR LES FILTRES

Fittre inf6rieur

*Recommandation du fabricant • Cette pratique 61iminera la consommation d'eau et d'6nergie associ6e a la pr6paration de la vaisselle et

vous 6pargnera du temps et des efforts.

Eau tr_s dure

Si I'eau distribu6e dans la region est tr_s dure (concentration de

calcaire sup6rieure & 15 grains), nettoyer le filtre au moins une fois

par mois. La formation d'un r6sidu blanc sur les surfaces du lave-

vaisselle indique la durete de I'eau. On trouve a lasection

"D6pannage" des conseils sur 1'61imination des taches.

D_pose du filtre

1. Faire tourner le filtre

superieur de 1¼tour dans

le sens antihoraire;

soulever le filtre.

2. Saisir le filtre inferieur dans

I'ouverture circulaire,

soulever 16gerement et

tirer vers I'avant.

3. Nettoyer les filtres - voir la

description du processus

ci-dessous.

Patte de

) c

Depose du filtre superieur

Nombre Vaisselle lav_e avant le

d'utilisations par chargement

semaine

1-3 Une fois par an

4-7 Une fois par an

Une fois par an

13-14 Une fois par an

Vaisselle racine et Vaisselle seulement racine Vaisselle ni racine ni rinc_e

rinc_e avant le avant le chargement* avant le chargement

chargement

Une fois paran ToUsles deux mois

Une fois par an Deux fois par an Une fois par mois

Deux fois par an ToUsles trois mois ToUtes les deux semaines

Deux fois par an Tousles trois mois Une fois par semaine

La page charge ...

Jenn-Air JDB3200AWW0 Le manuel du propriétaire

Marque: Jenn-Air

Modèle: JDB3200AWW0

Catégorie: Lave-vaisselle

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Jenn-Air JDB3200AWW0 Owner's manual

Jenn-Air JDB3200AWW0 Le manuel du propriétaire

Jenn-Air JDB3200AWW0 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents