Jensen VM9223 - Touch Screen Double Din MultiMedia Receiver Le manuel du propriétaire

Marque: Jensen

Modèle: VM9223 - Touch Screen Double Din MultiMedia Receiver

Catégorie: Récepteurs multimédia de voiture

Taper: Le manuel du propriétaire

VM9223

Operation Manual

Manual de Operación

Instructions d'opération

160

40W x 4

Watts Peak

Vatios el Máximo

Watts Maximum

VM9223 Multimedia Receiver

A / V

Input

SRC VOL - VOL + MUTE PIC

VM9223

CONTENTS

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s

manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to

use all the features of your new Jensen VM9223 Mobile Multimedia Receiver for maximum

enjoyment.

Introduction ........................................................................................................................... 1

Controls and Indicators......................................................................................................... 2

Remote Control..................................................................................................................... 3

Using the TFT Monitor .......................................................................................................... 4

Operating Instructions........................................................................................................... 6

Setup Menu........................................................................................................................... 7

Tuner Operation.................................................................................................................... 9

DVD/VCD Video Operation................................................................................................. 10

DVD/CD Audio Operation ................................................................................................... 13

MP3/WMA Operation.......................................................................................................... 14

Bluetooth Operation............................................................................................................ 16

Troubleshooting .................................................................................................................. 19

Specifications...................................................................................................................... 22

CONTENIDO

Gracias por elegir los productos Jensen. Esperamos que encuentre en este manual

instrucciones claras y fáciles de seguir. Si se toma unos pocos minutos para leerlo, aprenderá

cómo utilizar todas las funciones de su nuevo radio Jensen VM9223 para su máximo

entretenimiento.

Introducción......................................................................................................................... 23

Controles e Indicadores...................................................................................................... 24

Control Remoto................................................................................................................... 25

Como Usar el Monitor TFT.................................................................................................. 27

Instrucciones de Funcionamiento ....................................................................................... 28

Menú de Configuración....................................................................................................... 30

Operación de Sintonizador.................................................................................................. 33

Operación de Video de DVD/VCD ...................................................................................... 34

Operación de Audio de DVD/CD......................................................................................... 38

Operación de MP3/WMA .................................................................................................... 39

Operación de Bluetooth ...................................................................................................... 41

Resolución de Problemas ................................................................................................... 44

Especificaciones ................................................................................................................. 47

TABLE DES MATIÈRES

Merci d'avoir choisi un produit Jensen. Nous espérons que vous allez trouver les instructions

dans ce guide de propriétaire claires et faciles à suivre. Prenez quelques minutes à le

consulter, vous apprendrez à utiliser toutes les fonctions de votre nouvelle radio Jensen

VM9223 pour en tirer une jouissance maximum.

Introduction......................................................................................................................... 49

Controles et Indicateurs ..................................................................................................... 50

Telecommande................................................................................................................... 51

Utilisation du moniteur TFT................................................................................................ 53

Instructions d’operation...................................................................................................... 54

Menu configuration............................................................................................................. 56

Operation Tuner................................................................................................................. 59

Operation DVD/VCD video................................................................................................. 60

Operation DVD/CD audio................................................................................................... 64

Operation MP3/WMA ......................................................................................................... 65

Operation Bluetooth ........................................................................................................... 67

Depannage......................................................................................................................... 70

Specifications..................................................................................................................... 73

VM9223

INTRODUCTION

Congratulations on your purchase of the Jensen VM9223

Mobile Multimedia Receiver.

It’s a good idea to read all of the instructions before beginning

the installation. We recommend having your Jensen VM9223

installed by a reputable installation shop.

Features

DVD

• Aspect Ratio - Full and Normal

• Fast Forward - 2X, 4X, 8X and 20X

• Slow Motion - 1/2, 1/4, 1/6 and 1/7

• Play, Pause, Stop, Next Chapter and Previous Chapter

CD / MP3 / WMA

• ID3 Tag Compatible

• Directory Search (MP3 / WMA Only)

• Direct Track Access via Remote Control

• Burn up to 1500 MP3 and WMA Files onto a DVD+R /

• Audible Forward / Reverse Track Search (CD-DA Only)

• Random, Repeat and Intro

• Play, Pause, Stop, Next Track and Previous Track

Tuner

• USA, A. America 1, Arabia, China, S. America 2,

Europe, Korea Frequency Spacing

• 30 Station Presets (18 FM / 12 AM)

• Auto Stereo / Mono

• Auto Store

Chassis

• Motorized Slide-Down LCD Screen

• 2.0 DIN (Import / ISO-DIN Mountable)

• 7" TFT Active Matrix LCD with Anti-Glare Coating

• 336,960 Sub Pixels (1440W X 234H)

• Pixel Pitch – 0.321W X 0.370H

• Screen Tilt / Angle Adjustment

• Beep Tone Confirmation (On-OFF Option)

• Heat Management System – Forced Air Cooling to keep

the chip sets operating at nominal temperatures

General

• Navigation Ready (NAV102 Only)

• Bluetooth Ready (with purchase of BTM10) providing

hands-free profile for safety / convenience and A2DP

profile for streaming music from a PDA / PMP

• 44-Key Infrared Remote Control

• Composite Video Output for an Additional Screen

• Two Audio / Video Auxiliary Inputs for Game Console,

Camcorder, Navigation, etc.

• Three-Band Tone control (Bass, Mid and Treble) with

Eight Preset EQ Curves

• Front, Rear and Subwoofer Line Output

• Programmable Volume Control

• Rear Camera Input (Normal and Mirror Image View)

• Touch Screen Calibration Mode

• 100-Ohm Preamp Line Output – All Audio Channels

• 2VRMS Line Output – All Channels

• RCA Audio/Video Input

• 2.5mm Front Panel Audio/Video Input

• SWC Interface – Compatible with PAC adapter SWI-PS

Steering Wheel Control Interface, sold separately

Optional Equipment

•NAV102

The VM9223 is "navigation ready." Before accessing

any navigation features, you must purchase and install

the navigation module (NAV102). All installation and

operating instructions will be included with the

navigation module.

Once the navigation module is connected and operating

properly, the NAV source mode will become active.

While the navigation module is not installed, the NAV

option appears gray, indicating the function is not

available.

•BTM10

Before you can connect to a Bluetooth enabled device,

you must purchase and install the Jensen BTM10.

•Bluetooth Phone

See “Bluetooth Operation” on page 16.

•Rear Camera

The VM9223 is "camera ready." Before accessing any

camera features, you must purchase and install a rear

video camera. Once the rear camera is connected and

operating properly, the CAMERA source mode will

become active. While the camera is not installed, the

CAMERA option appears gray, indicating the function is

not available.

WARNING! To reduce the risk of a traffic accident (except

when using for rear view video camera or navigation)

never use the video display function while driving the

vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit.

WARNING! To prevent injury from shock or fire, never

expose this unit to moisture or water.

WARNING! Never use irregular discs.

WARNING! Using an improper fuse may cause damage

to the unit and result in a fire.

VM9223

CONTROLS AND INDICATORS

Button Operation

1. MUTE

Press to silence the audio. Press again to resume the

previous volume level.

In radio mode, press and hold to set the LOC/DX function. In

all other modes, press and hold while the volume icon is

showing to set the turn-on volume.

2. SD Card Slot

Insert SD card for playback of compatible multimedia files.

3. PIC

Press to adjust the Brightness and Contrast. Press the PIC

button again to move between Brightness and Contrast.

Press the VOL-/VOL+ buttons (5) to adjust the setting for the

selected option.

When the NAV102 is connected to the VM9223, press and

hold to display the navigation user interface.

4. OPEN/CLOSE

Press to activate the automatic mechanical system and slide

the TFT monitor down to reveal the disc and SD slots. Press

again to close the TFT.

Press and hold to activate the tilt function. Use the VOL -/

VOL+ buttons to adjust the angle of the screen while the

yellow tilt icon is flashing. You can also adjust the title using

the and buttons (27, 26) on the remote control. Press

once to adjust the downward tilt angle of the screen one step

at a time or press and hold to adjust the angle in a continuous

motion.

5. VOL -/VOL+

Press VOL - to decrease the volume. Press VOL+ to

increase the volume.

6. SRC/

Press to turn the unit on. Press and hold to turn the unit off.

Press to access the SOURCE MENU.

7. TFT Monitor

8. IR Remote Control Receiver

9. Disc Indicator Light

10. Audio/Video Input

11. Eject

Press to eject disc.

Press and hold to reset core mechanism position.

12. RESET

Press to reset system settings to factory default (except the

password and parental lock setting).

13. Disc Slot

LABEL SIDE UP

DISC IN

EJECT

VM9223 Multimedia Receiver

A/V

Input

SRC VOL- VOL+ MUTE PIC

316 5410

128

VM9223

REMOTE CONTROL

Table 1: Remote Control Functions

Button Function

Name Ref# DVD VCD TUNER CD/MP3/USB/SD

MENU 1 Enter the main menu of the

disc Turn on/off PBC when playing

VCD

TITLE 2 Enter the title menu of the

disc

MUTE 3 Toggle on/off audio output Toggle on/off audio output Toggle on/off audio output Toggle on/off audio output

POWER/ 4 Turn the power on/off Turn the power on/off Turn the power on/off Turn the power on/off

AUDIO 5 Change the audio language

for disc playback

REPT A-B 6 Setup to repeat playback from

time frame A to time frame B Setup to repeat playback from

time frame A to time frame B

REPT 7 Repeat playback of current

chapter Repeat playback of current

track

SRC 8 Select playing mode Select playing mode Select playing mode Select playing mode

SUBTITLE 9 Language selection for subti-

tle

DISP/

CLEAR 10 Display playback information

Delete entry or move back-

wards to correct error in Direct

Access mode

Display playback information

Delete entry or move back-

wards to correct error in Direct

Access mode

PRESET /\ 11 Navigate the preset station list

PRESET \/ 12 Navigate the preset station list

ANGLE 13 Play back disc in different

angle for a scene Play back Picture CD with dif-

ferent angle of picture dis-

played

>> 14 Fast forward the disc content Fast forward the disc content Changes station up one incre-

ment Fast forward the disc content

VOL - 15 Decrease volume Decrease volume Decrease volume Decrease volume

VOL + 16 Increase volume Increase volume Increase volume Increase volume

|<< 17 Select the previous chapter

for playback Select the previous chapter

for playback Search an available radio sta-

tion by decreasing tuning fre-

quency

Select the previous track for

playback

>/|| 18 Pause playback/start play-

back Pause playback/start play-

back

>>| 19 Select the next chapter for

playback Select the next chapter for

playback Search an available radio sta-

tion by increasing tuning fre-

quency

Select the next track for play-

back

/20 Stop playback/end call Stop playback/end call End call Stop playback/end call

GOTO/ 21 Go to specific time frame and

playback/dial call Go to specific time frame and

playback/dial call Enter radio station directly Dial call when Bluetooth con-

nected

VM9223

<< 22 Slow playback/fast rewind

playback Slow playback/fast rewind

playback Changes station down one

increment

ZOOM 23 Zoom in/out on an image Zoom in/out on an image

PIC 24 Display set-up parameters Display set-up parameters

OPEN/

CLOSE 25 Open/close the TFT monitor Open/close the TFT monitor Open/close the TFT monitor Open/close the TFT monitor

26 Decrease monitor tilt angle Decrease monitor tilt angle Decrease monitor tilt angle Decrease monitor tilt angle

27 Increase monitor tilt angle Increase monitor tilt angle Increase monitor tilt angle Increase monitor tilt angle

WIDE 28 Select display mode: FULL or

NORMAL Selects display mode: FULL

or NORMAL

1, 2, 3, 4, 5,

6, 7, 8, 9, 0

(Numeric

Keypad)

29 Directly access chapter 1-6 selects preset for current

band Directly access track

/BAND 30 Slow motion playback Slow motion playback Change AM/FM band

SETUP 31 Display Setup menu Display Setup menu Display Setup menu Display Setup menu

EQ 32 Modify equalizer settings Modify equalizer settings Modify equalizer settings Modify equalizer settings

RDM 33 Play all chapters in random

order Play all tracks in random

order

INT 34 Play the first ten seconds of

each track

EJECT 35 Eject disc Eject disc Eject disc Eject disc

Table 1: Remote Control Functions

Button Function

Name Ref# DVD VCD TUNER CD/MP3/USB/SD

VM9223

USING THE TFT MONITOR

Open/Close TFT Monitor

Open TFT Monitor

Press the OPEN ( ) button (4) on the front panel or remote

control to slide the monitor panel down to reveal the disc and

SD card slots.

Close TFT Monitor

Press the OPEN ( ) button (4) on the front panel or remote

control to close the monitor panel.

Monitor Tilt Angle Adjustment

A known characteristic of LCD panels is the quality of the

display in relationship to the viewing angle. The monitor

angle can be adjusted for optimum viewing using one of the

following methods:

Step by Step Angle Adjustment

Press the ( ) or ( ) button on the remote control (27, 26) to

adjust the tilt angle of the screen one step at a time.

You can also adjust the tilt by pressing and holding the OPEN

( ) button (4) on the front panel. Use the VOL -/VOL+

buttons to adjust the angle of the screen while the red tilt icon

is flashing.

Continuous Angle Adjustment

Press and hold the ( ) or ( ) button on the remote control to

adjust the tilt angle in a continuous motion.

Aspect Ratio

Press the WIDE button (28) on the remote control to adjust

the aspect ratio as follows:

Image Setting

Table 2 shows the video output mode for each playing

source.

*CVBS – Composite Video Baseband Signal

Parameter Adjustment Procedure

1. Enter Picture Quality Setting Mode:

Press the PIC button (24) on the remote control or the

PIC button (3) on the monitor.

2. Select Item to Set:

Press the PIC button (3) on the control panel to select

“BRIGHT” or “CONTRAST”.

3. Set Parameters:

Press the +/– buttons (15, 16) on the remote or press

the VOL-/VOL+ buttons (5) on the control panel.

4. Exit Picture Quality Setting Mode:

Press the PIC button (24) on the remote control or the

PIC button (3) on the monitor

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle

Parking Brake circuit, the front TFT monitor will display video

when the Parking Brake is engaged. (When the pink wire is

grounded via the Parking Brake circuit, video will be

displayed.)

FULL

The entire screen is extended

horizontally to the aspect ratio of 16 to

9. The extension ratio is the same at

any point.

NORMAL

The conventional display image has a

4 to 3 ratio of horizontal to vertical,

leaving a blank area on the right and

left sides of the display.

STANDBY

Screen becomes black. Touch screen

to resume.

Table 2: Video Output Modes

Playing Source Video Output Modes

AM/FM TUNER RGB Mode

DVD RGB Mode

BT RGB Mode

AUX IN1 CVBS Mode

AUX IN2 CVBS Mode

NAV CVBS Mode

CAMERA CVBS Mode

VM9223

OPERATING INSTRUCTIONS

Power On / Off

Press the /SRC button (6) on the unit (or the button (4)

on the remote control) to turn the unit on. The buttons on the

front of the unit light up and the current mode status appears

in the LCD (7).

Press and hold the button to power off the unit.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The

Beep tone can be disabled through the Setup menu.

Mute

Press the MUTE button on the front panel (1) or the MUTE

button (3) on the remote control to mute the volume from the

unit. Press the MUTE button again to restore the volume. The

yellow volume icon appears on the TFT with an “X” through it.

Adjusting the volume or using any of the audio setup features

cancels the mute function.

Playing Source Selection

Press the SRC button (6) on the front panel or the SRC

button (8) on the remote to change between available playing

sources. The playing mode is displayed on the TFT screen.

External peripheral devices can be connected to this unit via

the rear RCA inputs or the A/V INPUT connector (10) on the

front of the unit. Select “AUX-IN1” to access an auxiliary

device connected to the A/V INPUT on the front panel. Select

“AUX IN2” mode to access a device connected to the rear

AUX IN connectors.

Connect the external device to the 2.5mm to 3.5mm Media

Cable and then plug the cable into the A/V INPUT connector

(10) on the front of the radio. Select “AUX IN1” mode to

access an auxiliary device connected to the A/V INPUT on

the front of the radio. You cannot directly control external

devices connected to the A/V INPUT.

Volume Adjustment

To increase or decrease the volume level, press the VOL+/

VOL- buttons (15, 16) on remote control or front panel (5).

The volume ranges from “0” to “40”. The LCD or TFT screen

displays the volume level for 3 seconds.

Steering Wheel Control (SWC)

The VM9223 is compatible with the PAC (Pacific Accessory

Corporation) steering wheel control adapter SWI-PS. A

3.5mm female connector (labeled “SWC Interface”) on the

back of the head unit allows connectivity to the PAC adapter.

Please refer to the instructions included with the PAC adapter

for detailed installation information.

SWC Functions

The following controls are available for most vehicles:

1. Vol Down

2. Vol Up

3. Mute

4. Seek Down / Previous Track / ** Preset Down

5. Seek Up / Next Track / ** Preset Up

6. SRC (Source)

7. ** Select

8. ** Select

9. Band

** If additional steering wheel control buttons are available on

the vehicle, function 7 / 8 may be assigned the "Select"

feature. This feature / function may not be available on some

vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is

pressed momentarily, Preset Up will be selected. If "Select"

(function 7 or 8) is held down and function 5 is pressed

momentarily, Preset Down will be selected.

Audio Control Menu

The Audio Control feature allows you to easily adjust your

audio system to meet the acoustical characteristics of your

vehicle, which vary depending on the type of vehicle and its

measurements. Proper setting of the Fader and Balance

boosts the effects of the cabin equalizer.

Press the EQ button on the touch screen to display the audio

menu.

To adjust an audio feature:

1. Use the touch screen, or press the (>>|)/(|<<) buttons

(14, 22) on the remote control to highlight the audio fea-

ture to be adjusted.

2. Touch the screen to select the highlighted option.

3. Touch the +/– buttons on the screen or press the |<<,

>>|, >>, or << buttons (17, 19, 14, 22) on the remote

control to adjust the selected feature to the desired

setting.

NOTE: The EQ mode will automatically change to

“USER” when individual audio functions are adjusted.

The Audio menu will automatically exit after a few seconds of

inactivity. To exit quickly, touch the top left corner of the

screen.

System Reset

To correct a system halt or other

illegal operation, use the tip of a pen

to press the reset button (12) located

on the front bottom-left corner of the unit. After a system

reset, the unit restores all factory default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD

resumes play once the reset is complete.

+14 — 0 —

0— —

–14 — –14 —

User

FAD BAL

BASS MID TREB SUB

User

Table 3: Audio Adjustments

Audio Function Adjustable Range

EQ User

Rock

Hip Hop

Dance

Latin

Rave

Urban

Acoustic

BASS -14 to +14

MID -14 to +14

TREB -14 to +14

SUB -14 to 0

BAL–FAD Grid

[RESET] Butto

VM9223

SETUP MENU

To access system settings, press the SETUP button (31) on

the remote control or touch the button on the screen to

enter the “SETUP” menu. The “GENERAL” sub-menu

appears highlighted in blue.

Accessing Menu Items

Touch the sub-menu name, press the <<, >>, |<<, or >>|

directional buttons (22, 14, 17, 19) on the remote control to

select a sub-menu (Language, Audio, Rating, etc.).

The features available for adjustment under the highlighted

sub-menu option will appear in the center of the screen.

Adjusting a Feature

1. Use the touch screen to select the feature to be

adjusted.

2. Enter the option field for the feature you want to adjust

by using the touch screen or pressing the >/|| button

(18) on the remote. A submenu appears in a second row

with the selected option highlighted in blue.

3. Select a new value by using the touch screen or

pressing the >> or << buttons (14, 22) on the remote

control.

4. Use the touch screen or press the >/|| button (18) on the

remote control to confirm setup.

General Sub-menu Features

Language Sub-menu Features

If a DVD supports more than 1 Subtitle or Audio language, all

the languages are available for selection during playback. If

the selected language is not supported by the DVD, then the

default language is used.

Audio Sub-menu Features

RADIO

SETUP

Rating

Bluetooth

Hardware

DEMO

P.VOL

TS Cal

General Language Audio Back

Clock Mode 12Hr

Clock 04 : 31 AM

Tuner Region USA

Beep On

DIRECTIONAL BUTTONS

Setting Options Function

Clock

Mode 12Hr Clock displays 12 hour time using

AM and PM.

24Hr Clock displays 24 hour time up to

23:59.

Clock (HH:MM) Clock appears in the top right cor-

ner of the screen and on the LCD

screen during certain operations.

NOTE: The AM/PM indication will

change as you continue to adjust

the hour past 12.

Tuner

Region USA • AM Frequency Spacing - 10kHz

• AM Frequency Band -

530kHz~1720kHz

• FM Frequency Spacing - 200kHz

• FM Frequency Band -

87.5MHz~107.9MHz

S.Amer1 • AM Frequency Spacing - 10kHz

• AM Frequency Band -

530kHz~1720kHz

• FM Frequency Spacing - 100kHz

• FM Frequency Band -

87.5MHz~108.0MHz

Arabia • AM Frequency Spacing - 9kHz

• AM Frequency Band -

531kHz~1620kHz

• FM Frequency Spacing - 100kHz

• FM Frequency Band -

87.5MHz~108.0MHz

China • AM Frequency Spacing - 9kHz

• AM Frequency Band -

522kHz~1620kHz

• FM Frequency Spacing - 100kHz

• FM Frequency Band -

87.5MHz~108.0MHz

S. Amer2 • AM Frequency Spacing - 5kHz

• AM Frequency Band -

520kHz~1600kHz

• FM Frequency Spacing - 100kHz

• FM Frequency Band -

87.5MHz~108.0MHz

Europe • AM Frequency Spacing - 9kHz

• AM Frequency Band -

522kHz~1620kHz

• FM Frequency Spacing - 50kHz

• FM Frequency Band -

87.5MHz~108.0MHz

Korea • AM Frequency Spacing - 9kHz

• AM Frequency Band -

531kHz~1602kHz

• FM Frequency Spacing - 200kHz

• FM Frequency Band -

88.1MHz~107.9MHz

Beep On When turned on, an audible beep

tone confirms each function selec-

tion.

Off No beep sounds.

Setting Options Function

OSD English On Screen Display appears in

English.

DVD Audio English DVD Audio is heard in English

when the option is available.

DVD Subtitle English DVD subtitles automatically appear

in English when available.

Auto DVD subtitles appear according to

the default subtitle language speci-

fied on the disc.

Off DVD subtitles do not appear auto-

matically.

Disc Menu English DVD menu (if applicable) is dis-

played in English.

Setting Options Function

DRC Off Employ the Dynamic Range Control

for better playback for low volumes.

Loudness Off Turn the Bass Boost feature on/off.

Subwoofer Off Turn the subwoofer on/off.

Setting Options Function

VM9223

Bluetooth Sub-menu Features

Rating Sub-menu Features

The DVD system has a built-in parental lock feature to

prevent unauthorized persons from viewing restricted disc

content. By default, the rating system is unlocked. Once

setup, the parental lock is released only by entering the

correct password. Once the password is entered, rating is

available for setup.

To reset the password, access the “RATING” menu and enter

the current password. Once the correct password is entered,

you can access the “Password” field and enter a new one.

NOTE: Record the password and keep it in a safe place

for future reference. The rating for each disc is marked

on the disc, disc packing, or documentation. If the rating

is not available on the disc, the parental lock feature is

unavailable. Some discs restrict only portions of the disc

and the appropriate content will play. For details, please

refer to the disc description.

Hardware Sub-menu Features

If the monitor is in display mode, the monitor automatically

switches to CAMERA mode upon reverse driving. When the

reverse driving stops, the monitor return to its original input

mode.

P.VOL Sub-menu Features

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETUP

menu, select the “TS CAL” option.

After entering calibration mode, a crosshair appears in a

corner quadrant of the screen. To begin calibration, press and

hold the crosshair for one second until it moves to the next

quadrant. Continue for each quadrant until the calibration is

completed.

DEMO Sub-Menu Features

You can stop/run demonstration mode or turn Demo Auto

Run on/off by choosing the “Demo” option from the SETUP

MENU.

When "Demo Auto Run" is Off, you can select "Demo Mode >

Run" to start Demo Mode. Demo Mode scrolls through the

various source screens, simulating activity on the display.

“Demo Mode” is discreetly displayed in yellow text (below the

clock), to indicate the unit is in Demo Mode. To stop Demo

Mode, press the upper-left quadrant of the TFT (Source

select).

When “Demo Auto Run” is On, the unit will automatically

display Demo Mode when powered on.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the

SETUP button (31) on the remote control or touch the BACK

button on the screen.

Sub Filter 80Hz Selecting a crossover frequency

sets a cut-off frequency of the sub-

woofer's LPF (low-pass filter). The

Crossover frequency setting has no

effect if the subwoofer is set to

“OFF”.

120Hz

160Hz

Setting Options Function

Bluetooth On Enable Bluetooth function.

Off Disable Bluetooth function.

Auto Answer On The unit automatically answers all

incoming calls.

Off Manually answer calls by touching

the “call” button.

Connect Manual Connect the last active mobile

phone by touching the CONNECT

icon when disconnected.

Auto Automatically connect when your

paired phone is in range.

Pairing Code The default code is “1234”. Touch

the keypad icon to open the keypad

and enter the pairing code or pass

key required for Bluetooth connec-

tion to your mobile phone. Not all

phones/devices require a pairing

code. The default code is “0000” for

many models.

Setting Options Function

Password _ _ _ _ Enter a 4-digit password to activate

the “Rating” feature.

Setting Options Function

Rating 1. Kid Safe Select the appropriate rating level

for the intended audience.

You may override higher ratings by

using your password.

2. G

3. PG

4. PG-13

5. PG-R

6. R

7. NC-17

8. Adult

Load Factory Reset Select “Reset” to restore the factory

default settings for all functions

except the Rating system.

Setting Options Function

Camera In Normal

Mirror Reverse the camera image as if

looking through a rear-view mirror.

TFT Auto

Open On The TFT panel automatically opens

when the unit is turned on.

Off You must press the OPEN button

(1) to open the TFT panel.

Manual When the ignition is turned OFF, the

TFT panel DOES NOT retract if it

was previously out

Video Input

(Input cir-

cuitry autode-

tects the

video signal

from the Aux

In source).

NTSC The color signals are output in the

standard NTSC format.

PAL The color signals are output in the

standard PAL format.

Auto The color signal output is switched

automatically based on the current

video input signal - NTSC or PAL.

Setting Options Function

Source Radio Choose a source for which you

would like to increase the relative

volume (LEVEL).

Disc

USB

AUX IN1

AUX IN2

NAVI

Level 0-6 Increase relative volume for speci-

fied source up to 6 decibbels.

VM9223

TUNER OPERATION

Tuner TFT Display

1. Current radio band indicator

2. Radio frequency indicator

3. Clock

4. Stereo reception indicator

5. Tuning mode indicator (local/distant)

6. Preset radio stations: Touch to recall preset stations

7. No information in Tuner mode

8. Touch for quick access to Equalizer level settings

9. Touch to access the direct entry screen

10. Preset station indicator

11. |<<: Touch to seek backward

12. >>|: Touch to seek forward

13. <<: Touch to tune backward one step

14. >>: Touch to tune forward one step

15. BAND: Touch to change between AM/FM bands

16. AS: Touch to automatically store stations

17. Touch to view the SOURCE MENU and select a new

playback source

18. MEM: View screen used to enter current channel into

preset memory

19. PS (Preview Scan): Touch to scan all stations available,

stopping for 5 seconds at each and continuing until a

station is selected

20. View setup menu.

Switch to Radio Tuner source

• Touch the top left corner of the screen (the RADIO

circle) to view the SOURCE MENU. Touch “Radio”.

• Press the SRC button (6) on the front panel or remote

control (8) to switch to the AM/FM source.

Select FM/AM Band

Touch the BAND button (15) on the screen or remote control

(30) to change between the following bands: FM1, FM2,

FM3, AM1, and AM2.

Seek Tuning

To seek the next station:

• Touch the >>| button on screen (12).

• Press the >>| button (19) on remote control.

To seek the previous station:

• Touch the |<< button on screen (11).

• Press the |<< button (17) on the remote control.

Manual Tuning

To increase or decrease the tuning frequency one step:

• Touch the or buttons on screen (14, 13).

• Press the >> or << buttons (14, 22) on the remote

control.

Direct Tuning

To enter a radio station directly, touch the button (9) or

press the GOTO button (21) on the remote control to display

the direct entry menu.

Enter the desired radio station using the on-screen number

pad. Press the enter button (arrow) to tune to the selected

station. To exit the screen without changing the station, touch

Exit. To clear your entry and start over, touch Clear.

Using Preset Stations

Six numbered preset buttons store and recall stations for

each band. All six stored stations (P1-P6) for the current

band appear on the screen.

Storing a Station

1. Select a band (if needed), then select a station.

2. Touch the on-screen MEM button (18) to open the

preset screen.

3. Touch the preset number in which you would like to

store the current station (or touch Exit to cancel and

close the menu). The preset number and station

appears highlighted.

AS (Auto Store)

Touch the on-screen AS button (16) to automatically store six

strong stations as presets for the band currently in use.

110 2

RADIO

FM-1 P1 87.5 MHz

01:02 PM

BAND AS MEM

P1 87.5 MHz

P2 90.1 MHz

P3 98.1 MHz

P4 106.1 MHz

P5 107.9 MHz

P6 102.9 MHz

ST LOC 9

FM:___._MHz

123

456

789

0Clear

Exit

Preset: _

Exit

P1 P2 P3

P4 P5 P6

VM9223

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be

displayed on the main TFT screen unless the parking

brake is applied. If you attempt to play a DVD while the

vehicle is moving, the TFT screen displays the following:

“Warning !!! It is illegal to view video while driving or

operating a motor vehicle. Set parking brake to view

video.” Rear video screens, if applicable, will operate

normally.

Insert/Eject Disc

To insert a disc, you must first press the button (4) to

open the front panel and reveal the disc slot. Upon inserting a

DVD disc, DVD mode is entered and disc play begins. The

disc indicator light (9) dims when a disc is inserted.

NOTE: If Parental Lock (Rating) is activated and the disc

inserted is not authorized, the 4-digit code must be

entered and/or the disc must be authorized. When

parental code is entered using the remote, the play/

pause button must be pressed to confirm entry. (See

“General Sub-menu Features” on page 7.)

You cannot insert a disc if there is already a disc in the unit or

if the power is off.

NOTE: DVD-R and DVD-RW will not play unless the

recording session is finalized and the DVD is closed.

Ejecting a Disc

Press the button (11) on the unit or remote control (35) to

eject the disc. The unit automatically reverts to Tuner mode.

You may eject a disc with the unit powered off. The unit will

remain off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism

operation occurs, press and hold the button (11) on the

unit or remote control (35) to reset the loading mechanism.

Normal operation resumes.

Accessing DVD Mode

To switch to DVD mode when a disc is already inserted,

press the SRC button (6) on the front panel or remote control

(8) or touch the top left corner of the screen.

Using the Touch-Screen Controls

The touch key areas for DVD playback are outlined below.

A – Displays playing information

B – Displays on-screen control menu

Controlling Playback

To access the on-screen controls, touch the bottom 1/3 of the

screen (section B). Touch the 1/2 button to view a second

page of controls

Stopping Playback

Touch the stop button ( ) on the screen or press the

button (20) on the remote control to stop DVD play.

Pausing Playback

Touch the play/pause button (>) on the screen or press the >/

|| button on the remote control (18) to suspend or resume

disc play.

Slow Motion Playback

Press the /BAND button on the remote control for slow

motion playback (Slow Forward: 1/2, 1/4, 1/6, 1/7, Slow

Rewind: 1/2, 1/4, 1/6, 1/7).

Rewind

Press the << button (22) on the remote control or the <<

button on the screen to play the current title in reverse. Keep

pressing and releasing the button to increase the rate from

“2X” to “4X”, “8X”, and “20X”.

Press >/|| (18) on the remote control or touch the on screen

play button (>) to resume normal play.

Fast Forward Playback

Press the >> button (14) on the remote control or the >>

button on the screen to fast forward. Keep pressing and

releasing the button to increase the rate from “2X” to “4X”,

“8X”, and “20X”.

Press >/|| (18) on the remote control or touch the on screen

play button (>) to resume normal play.

Repeat Playback

Press the REPT button (7) on the remote control or the

button on screen to alter repeat mode according to the

following:

• DVD: Repeat Chapter, Repeat TItle, Repeat Off

• VCD (PBC Off): Repeat Single, Repeat Off

NOTE: For VCD play, the repeat function is not available

if PBC is on.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to

repeat.

• Press the REPT A-B button (6) on the remote control to

set the start point (A) of the repeated section.

• Press the REPT A-B button again once you reach the

desired end point (B) of the repeated section. The

selected portion of the DVD will now repeat

continuously.

• Press the REPT A-B button again to cancel the A-B

section setting and stop repeat play.

Random Playback

With a DVD, VCD, or CD playing, press the RDM button (33)

on the remote control to activate random playback and play

all chapters/tracks in random order. “Random on” appears on

the screen.

1/2

BACK

MENU 2/2

BACK

DISP

AUDIO

A-B

TITLE

SUBTITLE

VM9223

Press the >>| button (19) on the remote control or on screen

to play the next random track.

Press the RDM button again to turn random play off.

NOTE: When a VCD is playing with PBC turned “On”,

activating random playback automatically turns PBC off.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the

main DVD menu. Use the directional buttons on the remote

control to select a title from the menu or touch the title on

screen.

Press the TITLE button (2) on the remote control or on

screen to select a different title for playback.

Press the >/|| button (18) on the remote control to confirm

your selection and begin playback. You can also select a title

using the touch screen.

Moving Through Chapters

Press the >>| button (19) on the remote control or the >>|

button on screen to advance to the next chapter on the DVD.

Press the |<< button (17) on the remote control or the |<<

button on screen to move to the previous chapter.

Goto Search

During DVD or VCD playback, perform the following steps to

use the GOTO feature to access a specific location on a disc:

1. Press the GOTO button (21) on remote control to enter

“GO TO” mode.

2. Press the >> or << buttons (14, 22) on the remote

control to select a category (highlighted in blue).

• For DVD mode, you can choose Title, Chapter or

Time search.

• For VCD mode, you can choose Time or Track

search.

3. Enter a time into the field using the numeric keypad (29)

on the remote control.

4. Press the >/|| button (18) on the remote control to go to

the specified location on the disc.

5. Press the GOTO button again to exit.

Direct Chapter / Track Selection

Remote Control Direct Entry

During DVD, VCD and CD

playback, you can use the numeric

keypad on the remote control (29)

to access a track directly.

Touch Screen Direct Entry

To select a chapter/track directly,

touch the button on screen control to display the direct

entry menu.

Enter the desired chapter/track using the on-screen number

pad. Press the enter button (arrow) to tune to the selected

station. To exit the screen without changing the station, touch

Exit. To clear your entry and start over, touch Clear.

Viewing an Alternate Picture Angle

(DVD Only)

Some DVDs contain scenes that have been shot

simultaneously from different angles. For discs recorded with

multiple angles, press the ANGLE button (13) on the remote

control to toggle available angles of the on-screen image.

Zooming

Press the ZOOM button (23) on the remote control to enlarge

and pan through the video image using the following options:

“Q1”, “Q2”, “Q3”, “Q4” and “OFF”.

Multi-Language Discs (DVD Only)

Changing Audio Language

If you are watching a disc recorded in multiple languages,

press the AUDIO button (5) on the remote control to choose

a language.

Changing Subtitle Language

If you are watching a disc recorded in multiple languages with

subtitles, press the SUBTITLE button (9) on the remote

control to choose the language in which you would like the

subtitles to appear.

NOTE: During VCD playback, press the AUDIO button (5)

on the remote control to choose between Left Channel,

Right Channel, and Stereo.

PBC (Play Back Control - VCD Only)

For VCDs with play back functionality, play back control

(PBC) provides additional controls for VCD playback.

Press the MENU button (1) on the remote control to toggle

the PBC function “On”/”Off”. Once PBC is on, playback starts

from track one of the play list.

NOTE: When PBC is activated, fast forward, slow

playback, and previous/next track are available. Repeat

and direct track selection are not available.

When PBC is activated, selecting random, scan, or search

playback automatically deactivates PBC.

DIRECTIONAL BUTTONS

Title _ _ _

Chapter _ _ _

Time __:__:__

DVD Search

Title/Chapter – Go to

specific time in a title/

chapter

Time – Go to specific

time in current title

Time __:__:__

Track _ _ _

VCD Track Search

Time – Go to specific

time in the current track

Track – Go to specific

track

Chapter: _ _

123

456

789

0Clear

Exit

VM9223

Playback Information

During DVD and VCD playback, press the DISP button on the

remote control (10) to display playback information on the

screen, including the media playing and current playback

time.

DVD Playback Information

The following information is displayed at the top of the screen

during DVD playback:

• T : 5/8 – “5/8" indicates the fifth of 8 titles on the DVD is

currently playing.

• C : 2/16 – “2/16" indicates that the second of 16

chapters on the DVD is currently playing.

• 00:41:28 – “00:41:28” indicates the playback time of the

current title.

• 2/6 Eng – The language display information

indicates the second language out of 6 (English) is

currently being used.

VCD Playback Information

The following information is displayed at the top of the screen

during VCD playback:

• VCD 2.0 – Format of current disc.

• T: 6/18 – “6/18” indicates the sixth of 18 tracks on the

VCD is currently playing.

• 00:02:18 – “00:02:18” indicates the playback time of the

current track.

General Disc Information

Table 4: Disc Properties

Symbol 12cm Disc Properties Max Play

Time

Single side single layer (DVD-5)

Single side double layer (DVD-9)

Double side single layer (DVD-10)

Double side double layer (DVD-

18)

(MPEG 2

Method)

133 minutes

242 minutes

266 minutes

484 minutes

Single side single layer (VCD) (MPEG 1

Method)

74 minutes

Single side single layer 74 minutes

Table 5: Disc Symbols

Symbol Meaning

Number of voice languages recorded. The num-

ber inside the icon indicates the number lan-

guages on the disc (maximum of 8).

Number of subtitle languages available on the

disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Letter Box

and “PS” stands for Pan/Scan. In the example on

the left, the 16:9 video can be converted to Letter

Box video.

Indicates the region code where the disc can be

played.

• Region 1: USA, Canada, East Pacific Ocean

Islands

• Region 2: Japan, Western Europe, Northern

Europe, Egypt, South Africa, Middle East

• Region 3: Taiwan, Hong Kong, South Korea,

Thailand, Indonesia, South-East Asia

• Region 4: Australia, New Zealand, Middle and

South America, South Pacific Ocean Islands/

Oceania

• Region 5: Russia, Mongolia, India, Middle

Asia, Eastern Europe, North Korea, North

Africa, North-West Asia

• Region 6: Mainland China

• ALL: All regions

Table 4: Disc Properties

Symbol 12cm Disc Properties Max Play

Time

VM9223

DVD/CD AUDIO OPERATION

Instructions for TFT control and Insert/Eject are the same for

DVD and CD operation. Please see the DVD/Disc Video

Operation section for information about these topics.

The VM9223 will play music or other audio files from the

following disc media:

• CD-DA

• CD-R/RW

•DVD

•DVD+R/RW

•DVD-R/RW

Upon inserting a disc, the disc and track title (if available),

along with the track number and playing time appear on the

screen.

CD Player User Interface

The on-screen indicators and touch key areas for CD

playback are outlined below.

1. Current track and total number of tracks on disc

2. Elapsed playing time

3. Current time

4. Track titles

5. Touch to view the SOURCE MENU and select a new

playback source

6. /||: Touch to play/pause disc playback

7. : Touch to stop disc playback

8. >>|: Touch to move to next track

9. |<<: Touch to move to previous track

10. >>: Touch to fast forward current track

11. <<: Touch to rewind current track

12. Touch to activate/deactivate Repeat play mode

13. Touch to activate/deactivate Random mode

14. Touch to access the direct entry screen

15. : Touch to view the SETUP menu

16. Touch for quick access to Equalizer level settings

Controlling Playback

Stopping Playback

Touch the button on screen or press the button (20) on

the remote control to stop disc play.

To resume playback, touch the /|| button on screen or press

the >/|| button on the remote control (18).

Pausing Playback

Touch the /|| button on screen or press the >/|| button on the

remote control (18) to suspend or resume disc play.

Moving Through Tracks

Press the >>| button (19) on the remote control or on screen

to advance to the next track on the disc.

Press the |<< button (17) on the remote control or on screen

to move to the previous track.

Repeat Playback

Touch the button on screen or press the REPT button (7)

on the remote control to alter repeat mode according to the

following:

• DVD: Repeat Chapter, Repeat Title, Repeat Off

• CD-DA: Repeat Single, Repeat Off

• CD-R/RW: Repeat Single, Repeat Off

• DVD-R/RW: Repeat Single, Repeat Off

Intro Scan (CD-DA discs only)

During disc play, press the INT button (34) on the remote

control to play the first 10 seconds of each track. When a

desired track is reached, press the INT button again to cancel

the function and play the selected track.

Random Play Select

While disc play is stopped, touch the button on screen or

the RDM button (33) on the remote control to play the tracks

on the disc in a random, shuffled order. Touch the (RDM)

button again to cancel Random Play mode.

NOTE: CD-R and CD-RW will not play unless the

recording session is finalized.

Fast Forward

Touch the >> button on screen or press the >> button (14) on

the remote control to fast forward. Keep pressing and

releasing the button to increase the rate from “2X” to “4X”,

“8X”, and “20X”.

Direct Track Entry

To select a track directly, touch the button on screen

control to display the direct entry menu.

Enter the desired track using the on-screen number pad.

Press the enter button (arrow) to tune to the desired track. To

exit the screen without changing the track, touch Exit. To

clear your entry and start over, touch Clear.

DISC

CDDA 1/10 00:00:23

01:02

Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

4911

Chapter: _ _

123

456

789

0Clear

Exit

VM9223

MP3/WMA OPERATION

Instructions for TFT control and Insert/Eject are the same for

DVD and MP3 operation. Please see the DVD/Disc Video

Operation section for information about these topics.

Media and File Requirements

This player allows you to play back MP3 and WMA files

recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs.

For CD-RW discs, please make sure it is formatted using the

full method and not the quick method to prevent illegal disc

operation. This unit will also display photos.

Up to 1500 songs/files can be burned onto a disc for a MEGA

DVD music mix. Do not exceed this number of songs/files or

disc readability problems may occur.

MP3 Format Compatibility

The file naming formats listed below are compatible with this

unit:

• ISO 9660 – file name: 12 characters, file extension: 3

characters

• ISO 9660 – file name: 31 characters, file extension: 3

characters

• Joliet – 64 characters

If the file or folder name does not conform to ISO 9660 file

system standards, it may not be displayed or played back

correctly. Use the following settings when compressing audio

data for your MP3 disc:

• Transfer Bit Rate: 128kbps

• Sampling Frequency: 48kHz

When recording MP3 up to the maximum disc capacity,

disable additional writing. For recording on an empty disc up

to maximum disc capacity, use the "Disc at once" setting.

MP3 Playing Order

When selected for play, files and folders are accessed in the

order they were written by the CD writer. As a result, the

order in which they are expected to be played may not match

the order in which they are actually played. You may be able

to set the order in which MP3/WMA files are to be played by

writing them onto a medium such as a CD-R with their file

names beginning with play sequence numbers such as "01"

to "99".

For example, a medium with the following folder/file hierarchy

is subject to Folder Search, File Search or Folder Select, as

shown below.

The VM9223 player will only recognize three folder levels and

does not display folders containing only other folders. In the

example above, the unit will display folders 3, 4, 6, and 8, but

not 2 and 7 since they do not contain any tracks directly.

Folder 5 is not recognized at all since it is at the fourth level.

Inserting a USB Device

NOTE: The USB port will recognize most USB flash

memory devices.

1. Locate the USB connector. The USB pigtail on the back

of the unit should be brought around to an accessible

place during installation.

2. Insert the USB device into the USB connector. The unit

will read the audio/video files on the USB device

automatically.

To remove the USB device, press the SRC button (6) to

switch to another mode and then remove the USB device

from the USB connector.

Loading an SD Card

To Insert an SD card, you must first press the /EJECT

button on the control panel (5) or remote control (23) to

reveal the SD card slot (14). Insert the SD card into the card

slot and the unit will read the media files on the card

automatically.

To remove the card, first press the SRC button (6) to switch to

another mode and stop SD playback. Push in and release to

pop the card out. Grasp the SD card and pull it straight out.

Most cards have a thin recess that helps with removal.

LABEL SIDE UP

DISC IN

EJECT

VM9223

MP3 Player User Interface

The on-screen indicators and touch key areas for MP3

playback are outlined below.

1. Current file and total number of files on your media

device

2. Elapsed playing time

3. Current time

4. Track titles

5. ID3 information

6. /||: Touch to play/pause disc playback

7. : Touch to stop disc playback

8. >>|: Touch to move to next track

9. |<<: Touch to move to previous track

10. : Touch to view the next page of songs

11. : Touch to view the previous page of songs

12. DIR -: Touch to view the previous folder

13. DIR +: Touch to view the next folder

14. Touch to access the direct entry screen

15. : Touch to view the SETUP menu

16. Touch for quick access to Equalizer level settings

17. Touch to view the SOURCE MENU and select a new

playback source

18. Folder name

Controlling MP3/WMA Playback

Playing MP3/WMA Files

After inserting a MP3/WMA disc, files will play in the

sequence of the “Root’ directory.

NOTE: When burning MP3 / WMA files onto a DVD disc,

use the 2X or 4X burning option, if available. This slower

burning speed will help eliminate buffer errors and

increase disc reading reliability. Also, use folders when

burning large numbers of songs / files to a disc for easy

music navigation. Select the "Disc at Once" option and

close your disc.

Stopping Playback

Touch the button on screen or press the button (20) on

the remote control to stop disc play.

To resume playback, touch the /|| button on screen or press

the >/|| button on the remote control (18).

Pausing Playback

Touch the /|| button on screen or press the >/|| button on the

remote control (18) to suspend or resume disc play.

Moving Through Tracks

Press the >>| button (19) on the remote control or on screen

to advance to the next track on the disc.

Press the |<< button (17) on the remote control or on screen

to move to the previous track.

Repeat Playback

Touch the button on screen or press the REPT button (7)

on the remote control to alter repeat mode according to the

following: Repeat Single, Folder Repeat, Repeat Off

Random Play Select

Press the RDM button (33) on the remote control to play the

files on the disc in a random, shuffled order. Press RDM

again to cancel Random Play mode.

Intro Scan

During playback, press the INT button (34) on the remote

control to play the first 10 seconds of each file. When the

desired track is reached, press INT again to end the scan and

play the selected file.

NOTE: CD-R and CD-RW will not play unless the

recording session is finalized.

Direct Track Entry

Use the numeric keypad (29) on the remote control to access

files directly or press the button (see “Direct Track Entry”

on page 13).

Viewing Photos

While viewing picture files, press the INT button (34) on the

remote control to view a thumbnail display of available

pictures. Press the ANGLE button (13) on the remote control

to rotate the selected picture 90 degrees each time the button

is pressed.

DISC

MP3 4/84 00:00:23

01:02 AM

1 Cherry Poppin Dad

2 Chris Isaak - Baby

3 Crazy Town - Butt

4 Phish - Birds Of A

5 Phish - Bouncin' R

6 Phish - Freebird (L

4911

DIR - DIR +

(Root)

VM9223

BLUETOOTH OPERATION

About Bluetooth

Bluetooth is a short-range wireless radio connectivity

technology that is developed as a cable replacement for

mobile phones, handheld PCs and other devices. Bluetooth

operates in 2.4 GHz frequency range and transmits voice and

data at speeds up to 1 megabit per second. Bluetooth was

launched by a special interest group (SIG) comprised of

Ericsson Inc., Intel Corp., Nokia Corp., Toshiba and IBM in

1998, and it is currently developed by nearly 2,000

companies worldwide. The Bluetooth word mark and logos

are owned by the Bluetooth SIG, Inc. and any use of such

marks by Audiovox Corporation is under license. Other

trademarks and trade names are those of their respective

owners.

NOTE: The line-of-sight distance between this unit and

your cellular phone must be 8 meters or less for sending

and receiving voice and data via Bluetooth wireless

technology. However, the transmission distance may

become shorter than the estimated distance, depending

on the environment in use.

Before attempting to use the Bluetooth functions on the

VM9223, you must purchase and install the BTM10. When

connected properly, the blue light appears illuminated.

Bluetooth features are only available when the BTM10 is

installed.

Please make sure your mobile phone supports Bluetooth

functions (Headset or Handsfree profiles or both). Adhere to

the following guidelines for successful operation.

• Before using Bluetooth functions, you must pair your

mobile phone to the VM9223 head unit (see “Pairing the

Bluetooth System with Your Mobile Phone and Head

Unit”). To ensure the best reception for pairing and re-

connection, please make sure the phone battery is fully

charged before you begin.

• Try to perform pairing within a few minutes of the phone

being turned on.

• Once the unit has been paired with the phone, the unit’s

model number, “VM9223”, will be displayed on the

mobile phone.

• To achieve the best performance, always keep the

mobile phone within 3 meters of the head unit.

• Always keep a clear path between the mobile phone

and the head unit. Never place a metal object or any

other obstacle between the mobile phone and the head

unit.

• Some mobile phones (like Sony Ericsson) may have a

"Power Saving Mode" option. PLEASE DO NOT use the

power saving mode with the VM9223.

• Before accepting or making a call, make sure your

mobile phone's “Bluetooth function” is turned on.

• To ensure the best conversation quality/performance,

stay within one meter of the BTM10 when talking.

• To “disconnect” the mobile phone from the head unit,

turn the Bluetooth connectivity off on the mobile phone

or touch the button.

•Phone Book direct searching through the head unit

is only available if the mobile phone supports Phone

Book Download. If the feature is not supported, the

head unit will display “Phone book not provided by this

phone” when an attempt is made to download a phone

book.

Bluetooth User Interface

The on-screen indicators and touch key areas for Bluetooth

operation are outlined below.

1. Current connection status/device connected

2. Current time

3. Bluetooth menu

4. Current operation status

5. Toggle Music/Phone menu

6. Transfer active call back to handset

7. Pair your Bluetooth phone (first time use)

8. Exit call listing display

9. Connect/disconnect Bluetooth device (phone, PDA,

personal music player, etc.) with hand-free function

10. Mute/un-mute microphone during active call

11. Answer incoming call/make call

12. Reject incoming call/end call/quit pairing process/quit

reading phone book or call listing

13. Touch to view the SETUP menu

14. Touch to view the equalizer

15. Touch to view the SOURCE MENU and select a new

playback source

16. Status indicators (phone mode, music mode, mic mute)

17. Touch to access the direct entry screen

18. : Touch to stop A2DP playback

19. Touch the scroll bar and arrows to view the previous/

next page of choices (only visible when needed)

20. Toggle Music/Phone menu/mode

21. Play/Pause selected file

22. |<<: Touch to move to the previous file

23. >>|: Touch to move to the next file

14 2

Disconnected

01:02 AM

1 Missed Calls

2 Received Calls

3 Dialed Calls

4 Phone Book

Menu List

612

22 18

PHONE INTERFACE MUSIC INTERFACE

La page charge ...

Jensen VM9223 - Touch Screen Double Din MultiMedia Receiver Le manuel du propriétaire

Marque: Jensen

Modèle: VM9223 - Touch Screen Double Din MultiMedia Receiver

Catégorie: Récepteurs multimédia de voiture

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

Jensen VM9223 - Touch Screen Double Din MultiMedia Receiver Le manuel du propriétaire

Jensen VM9223 - Touch Screen Double Din MultiMedia Receiver Le manuel du propriétaire

dans d''autres langues

Documents connexes