TECHNICAL FILE
R03.002_18/05/2011
Novopeldaño® Maxi
Applications
Novopeldaño® Maxi is a prole designed to be installed as stair nosing. Its particular visible side
provides a high resistance to slip, helping to fulll with the DB-SUA of the CTE (Spanish Technical
Building Code) by improving the value of slip resistance of the ooring where it is installed.
The installation of Maxi outdoors, could result in a variation of its original color, being signicantly
higher in the range of the redish colors. To avoid color variations due to the continuous sun exposure,
we recommend the installation of the Maxi range indoors. For outdoor installations we recommend the
MaxiKenya range, that has an excellent weatherability and remains unalterable under sun exposure.
Technical Features and Tests
General Features
Page 1 of 3
Novopeldaño® Maxi is a stair nosing made of Maxi, an exclusive
raw material of Emac® that belongs to the WPC (Wood Plastic
Composite) family of products. Its particular geometry and
appearance contribute to embellish all kind of stairs, specially the
rustic ones, being the perfect alternative to natural wood proles.
Novopeldaño® Maxi joins technology, sustainability, beauty and
security in just one product.
Material: Maxi (PVC + Vegetable Fibers)
Lenght: 3ft2in/8ft2in (1/2,5 l.m)
Dimensions:
h: 3/8”, 1/2”,9/16”
10/12/15 mm.
a: 1-3/4” (45 mm.)
Packaging: 10 u/box - (8 u. h15)
Finishes:
Resistance to chemical
agents
Very good except acetone, chromic acid and sulfu-
ric acid.
Water absorption
Very small absorption, high dimensional stability.
Retains its weight after dry.
Fire reaction M1 Classication
UNE 23.727-90 1R
Abrasion resistance Up to 2200 cycles without variation
UNE EN 438-2:2005
Aptdo. 23
Surface resistance to
staining
Resistance to acetone, coffee 176ºF/80ºC, bitumen,
hydrogen peroxyde 30%, sodium hydroxide 25%.
Acetone: surface degradation and blisters.
Rest: without changing.
Impact resistance
Spring: 34 N
Ball drop: 3,93ft/120 cm. maximum drop /
0,38 in./9,9 mm mark diameter
Cigarette burns Surface degradation
Resistance to humidity-
drying
> 20 cycles
UNE EN 14428
TECHNICAL FILE
R03.002_18/05/2011
2,3
9,4
17,6
4,6
9,7
21,9
0
5
10
15
20
25
No R floor test
R9 floor test
R10 floor test
Slip resistance Novopeldaño® Maxi
Original floor
Floor combined with Maxi
Novopeldaño® Maxi
Page 2 of 3
Slip resistance Very good.
UNE-ENV 12633:2003
Slip resistance Very good. See graph below.
DIN 51130
Slip resistance DIN51130
We have tested our Novopeldaño® Maxi under the DIN 51130 standard, to certify its good properties
of slip resistance. This reference had been already tested before under the Spanish standard UNE-
ENV 12633:2003, which is the one required by the CTE (Spanish Technical Building Code).
The tests were carried out in several panels (1000x500 mm.) which consisted of ceramics with
different classications of slipperiness, combined with our Novopeldaño® MaxiKenya proles as it
is shown in the picture.
These tests were carried out by qualied operators of the ITC (Technological Institute of Ceramics).
The results are also available for our reference Novopeldaño® Maxi. Please, check its technical le.
The graph below represents the global results after the tests. The dark red line represents the results for the original ooring,
and the clear one the results in combination with Novopeldaño® Maxi.
The rst ooring tested had a low initial value (2.3), that improved up to 6.5 with Novopeldaño® Maxi, which means that the
initial sliding ooring became a non-slip R9 ooring. The second ooring, certied as R9 (9.4 value) improved its slip resistance
value up to 12.7, changing its classication from R9 class to R10 class. Finally, the last ooring classied as R10 with a value of
17.6, in combination with the prole got a result of 23.7 and R11 class.
Class R9
Class R10
Class R11
TECHNICAL FILE
R03.002_18/05/2011
Materials
Maxi
Novopeldaño® Maxi
Placement
1 2
3
4 5
Warnings
Page 3 of 3
Maxi is a composite material formed by PVC and vegetable bers. Those bers proceed from recycling
of organic waste from agriculture. The waste reduction and the recycling of materials, help Maxi to fulll
with the Emac’s commitment with the Environment and the sustainable construction.
Maxi has an original nish, similar to wood and natural elements, which adapts to different decorative
environments. The main advantage of this composite is that has the best qualities of PVC and vegetable
bers such as good mechanic strenght, abrasion resistance and dimensional stability among others.
1. Spread a big amount of thin-set mortar on the surface of the riser.
2. Place the tile on the riser and press to get an optimal adherence.
3. Then, spread a big amount of thin-set mortar on the tread and align the prole on its vertex so it
rests on the riser (Do not let overhang, the leverage may remove the step and the tiles). Then press
so the thin-set mortar could pass through the mechanized holes of the anchoring wing.
4. Place one tile on the tread, align it to the prole and press to get a perfect adhesion. You can tap it
softly with a rubber hammer.
5. Clean the possible leftover material and let dry.
• Part of the composition of Maxi and MaxiKenya is natural, so it may have differences in tone that
can not be considered as manufacturing defects.
• It is recommended to take the proles by its central part, avoiding taking them by the tops to avoid
bending stresses which could cause scratches or breaks.
• Do not bend excessively the material. Store it always horizontally and in dry places.
• It must not be sanded, because that could affect to its surface appearance.
• It resists in moisture conditions but it is no recommended its use in submerged places.
• The range MaxiKenya is especially recommended for installations outdoors because it has an
excellent weatherability and remains unalterable under sun exposure.
We did not consider testing R11 or R12 ooring. The R11 and R12 are highly secure and non-sliding
oorings, so we can extrapolate that our stair nosings in combination with R11 oorings maybe will not
improve more but surely maintain the initial classication of the ooring.
Please, take into account that our proles are not certiable by themselves. Our Novopeldaño®
Maxi is not a prole classied as R9 or R10. What we are certifying is that our Novopeldaño® Maxi can
be combined with ceramics, thereby improving its slip resistance value and even, in some cases, its
classication.
Please note that this tests have been carried out with an especic ooring. This do not guarantee the
same results with other oorings classied as well as R9 or R10. There is a wide range of oorings in
the markets and the results of R9 oorings, for example, can uctuate between 6 and 10º. We can say
that your slip resistance value will be improved but not in the same way.
TECHNICAL FILE
R03.002_18/05/2011
You can nd out more information about the technical features of Emac®’s products by downloading
its Technical File in www.emac.es.
If you have any query, please contact our Technical Department in [email protected].
Technical information
Emac Complementos S.L. (Spain) info@emac.es // Emac America L.L.C. (FL,USA) [email protected] // Emac Italia S.R.L. (Italy) [email protected]
www.emac.es
The data provided are for information only and have been obtained by our supplier or Emac®.
Does not constitute legal guarantee in terms of properties and / or functionality of the application of material
Novopeldaño® Maxi
Cleaning and maintenance
Indoors Floorings
You can clean Maxi with a cloth dampened just with water or with water in a solution with a neutral
detergent 5%. The correct use of bleach doesn’t affect the material.
It is not recommended to use chromic or sulphuric acids or polar solvents as toluene or acetone for
its cleaning.
-
1
-
2
-
3
-
4
dans d''autres langues
- English: Emac NPMX7838 User manual
Documents connexes
-
Emac NPMXTK7812 Guide d'installation
-
Emac NPXK12612 Manuel utilisateur
-
Emac NEMX821 Manuel utilisateur
-
Emac NJP1031 Manuel utilisateur
-
-
-
-
-
-