© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (March 2009)

USB 2.0 Active Extension Pro System

User Manual English

Benutzerhandbuch Deutsch

Manuel Utilisateur Français

Manuale d’uso Italiano

LINDY No.s 42780, 42781, 42782, 42783

Introduction

The LINDY USB 2.0 Active Extension Pro System enables you to extend your USB 2.0 devices

by up to 56m, with true USB 2.0 High Speed performance of up to 480 Mbps!

The USB 2.0 Active Extension Pro System consists of four different units (each sold

seperately):

If you are creating an extension using multiple units from the Extension Pro System then the

first unit must always be the USB 2.0 Active Extension Pro 8m (Lindy Number 42780).

Once the first cable has been connected you can then cascade up to a further four cables to

achieve a maximum distance of 56m. The final part of the extension can be any of the four parts

of the Extension Pro System.

If you need to extend more than one port, or if your USB device requires more than 100mA to

operate, then you should use either the 8m or 12m Hub Pro units as the final part of the

extension. Please Note: The 12m Hub Pro unit can only be used at the end of an extension

while the 8m Hub Pro also can be used directly connected to a computer.

If you connect your USB device(s) to the final part of the extension using a standard USB cable,

please ensure that the cable used is no longer than 3m.

Computer

Einführung

Das LINDY USB 2.0 Active Extension Pro System ermöglicht die Überbrückung von USB-

Distanzen bis 56m mit USB 2.0 High Speed-Geschwindigkeit bis zu 480 Mbit/s!

Das USB 2.0 Active Extension Pro System besteht aus 4 verschiedenen Segmenten (jedes

kann einzeln bezogen werden):

angeschlossen werden kann. Eine Verlängerung, die aus mehreren Segmenten des USB 2.0

Active Extension Pro Systems besteht, muss immer mit dem USB 2.0 Aktivverlängerungskabel

Pro 8m (Lindy Art. Nr. 42780) beginnen.

Nach Anschluss des ersten Kabels können weitere vier Kabel bis zu einer maximalen Distanz

von 56m hintereinander geschaltet werden. Als letztes Segment kann jedes der vier Segmente

des Extension Pro System angeschlossen werden.

Wenn Sie mehr als einen Port verlängern möchten oder wenn der Strombedarf Ihres USB-

Devices über 100mA beträgt, können Sie den 8m oder 12m Hub als letztes Segemnt

verwenden. Der 12m Hub Pro kann nur am Ende einer Verlängerung verwendet werden,

Wenn Sie Ihre USB Devices am Ende der Verlängerung mit einem Standard-USB-Kabel

anschliessen, darf dieses Standardkabel maximal 3m lang sein.

Computer

Introduction

Le système actif d’extension LINDY USB 2.0 permet la rallonge des distances USB jusqu’à

56m avec la vitesse USB 2.0 High Speed de 480 Mbit/s!

Le système actif d’extension USB 2.0 se compose de 4 différents segments (chacun peut être

commandé séparément):

plusieurs segments de rallonges actives USB 2.0, doit toujours commencer avec la rallonge

active USB 2.0 Pro 8m (Lindy N° Art. 42780).

distance maximale de 56m (8 + 12 x 4). Le dernier segment peut être n’importe quelle rallonge

Pro.

Si vous voulez étendre plus qu’un seul port, ou si la consommation de votre périphérique USB

est supérieure à 100mA, vous pouvez utiliser le hub 8m ou 12m comme dernier segment. Le

ce câble standard ne doit pas dépasser 3m.

Ordinateur

8m Extension Pro

42780

12m Extension Hub Pro 42783

Introduzione

Il LINDY USB 2.0 Active Extension Pro System consente di estendere segnali USB 2.0 fino a

56m ad una velocità di trasferimento dati USB 2.0 High Speed fino a 480 Mbps!

Questo sistema di prolunghe attive USB 2.0 consiste in quattro differenti unità, ognuna delle

quali viene venduta singolarmente:

Per creare qualsiasi sistema di estensione con questo Extension Pro System avete sempre

bisogno di utilizzare come prima unità la USB 2.0 Active Extension Pro 8m (Lindy art 42780).

Una volta collegato il primo cavo potete connettere in cascata altre quattro prolunghe per

raggiungere una distanza massima di 56m. L’ultimo segmento deve essere sempre una di

queste prolunghe della serie Extension Pro System.

Se vi occorre più di una porta USB o se il dispositivo USB da estendere richiede più di 100mA

per funzionare, dovrete utilizzare l’Hub Pro da 8m o da 12m come ultimo segmento. Nota bene:

l’Hub Pro da 12m può essere utilizzato solo come ultimo segmento della prolunga mentre la

versione da 8m può anche essere collegata direttamente al computer.

Se i/il dispositivo/i USB che collegate utilizza un cavo USB standard, assicuratevi che non

superi i 3m di lunghezza.

Computer

Shielded cables must be used with this equipment to maintain compliance with radio frequency

energy emission regulations and ensure a suitably high level of immunity to electromagnetic

disturbances.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

This equipment complies with the requirements relating to electromagnetic compatibility, EN

55024 and EN55022 for ITE (Information Technology Equipment).

In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of