GPX TE2280 Manuel utilisateur

GPX
Marque
GPX
Modèle
TE2280
Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur
USER’S GUIDE
V:0959-0924-10
For the most up-to-date version of this User’s Guide, go to www.gpx.com
TE2280
22” Class TV
GPX2
• WARNING:Lithium batteries, like all rechargeable
batteries are recyclable and should be recycled or
disposed of in normal household waste. Contact your
local government for disposal or recycling practices in
your area. They should never be incinerated since they
might explode.
• WARNING: Shock hazard - Do Not Open.
• AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS
OUVRIR
Mains plug is used as disconnect device and it should
remain readily operable during intended use. In order
to disconnect the apparatus from the mains completely,
the mains plug should be disconnected form the mains
socket outlet completely.
La prise du secteur est utilisé pour déconnecter le
système.
La prise du secteur ne doit pas être obstruée ou doit être
facilement accessible pendant son utilisation. Pour être
complètement déconnecté de l’alimentation d’entrée, la
prise doit être débranchée du secteur.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (ni-cad, ni-mh, etc) batteries.
No mezcle baterías viejas y nuevas.
No mezcle baterías alcalinas, estándar (carbono-zinc) o
recargables (ni-cad, ni-mh, etc.).
• CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
• WARNING:To reduce the risk of re or electric shock,
do not expose this apparatus to rain or moisture.
• AveRTIssemeNT: Pour réduire le risque d’incendie
ou de choc électrique, ne pas exposer cet appareil sous la
pluie et l’humidité.
• CAUTION: Use of controls or adjustments or
performance of procedures other than those specied
may result in hazardous radiation exposure.
• WARNING: Changes or modications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
• WARNING: Do not place the unit on top of any soft,
porous, or sensitive surfaces to avoid damaging the
surface. Use a protective barrier between the unit and
surface to protect the surface.
• WARNING: Use of this unit near uorescent lighting
may cause interference regarding use of the remote. If
the unit is displaying erratic behavior move away from
any uorescent lighting, as it may be the cause.
• CAUTION:Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
• PRÉCAUTION: Danger d’explosion si les piles sont
remplacées de façon incorrect. Remplacer les piles
seulement par le même type de pile ou l’équivalent.
• WARNING: There is a danger of explosion if you
attempt to charge standard Alkaline batteries in the unit.
Only use rechargeable NiMH batteries.
• WARNING: The remote control’s button cell battery
contains mercury. Do not put in the trash, instead recycle
or dispose of as hazardous waste
The lightning ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufcient magnitude to constitute a risk of electric
shock to persons.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Warnings and Precautions
Customer Support: 1-888-999-4215 GPX 3
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The apparatus shall not be exposed to dripping or splashing and
that no objects lled with liquids, such as vases, shall be placed on
apparatus.
L’appareil ne doit pas être exposé aux écoulements ou aux
éclaboussures et aucun objet ne contenant de liquide, tel qu’un
vase, ne doit être placé sur l’objet.
• Main plug is used as disconnect device and it should remain readily
operable during intended use. In order to disconnect the apparatus
from the mains completely, the mains plug should be disconnected
form the mains socket outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facilement
accessible pendant son utilisation. Pour être complètement
déconnecté de l’alimentation d’entrée, la prise doit être débranchée
du secteur.
• Battery shall not be exposed to excessive heat such as sunshine, re
or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la
lumière du soleil, au feu ou autres choses de semblable.
• Caution marking is located at the rear or back of the apparatus.
Attention marquage est situé à l’arrière ou à l’arrière de l’appareil
• The marking information is located at the rear or back of apparatus.
Les informations de marquage est situé à l’arrière ou à l’arrière de
l’appareil.
FCC Warnings
Additional Warnings
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding - type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
When the provided plug does not t into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the
manufacturer.
12.
Use only with a cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
Important Safety Instructions
• 21.5” LED display
• Resolution: 1920 x 1080
• Max color: 16.7 million
• Brightness: 250 cd/m
2
• Contrast: 1000 : 1
• Response time: 5ms
• Viewing angle: H=170, V=160
• V-chip
• Closed captioning
• Electronic program guide
• Sleep timer
• Multi-language OSD
• RF input
• 2 HDMI inputs
• RCA audio input
• VGA/PC video input
• 3.5mm PC audio input
• Composite video input
• Component video input
• USB port
• DC power input: requires an AC/DC power
adapter (included)
• Stand and 3 screws
• Remote control: requires 2 AAA batteries
(included)
• AC/DC power adapter
* Please note, LCD panel specications are subject to change without notice.
Features Included
22” Class TV
GPX4
Customer Support: 1-888-999-4215 GPX 5
Table of Contents
22” Class TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Features
Included
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Power
Remote Power
Connecting the Stand
Television Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting a TV Antenna
Connecting Basic Cable
Connecting a Set-Top Box
Auto Scanning for Channels
Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Channel List View
Adding Favorites
Viewing Favorites
Parental Controls (V-Chip)
Setting the Clock
Television Menu
USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting a USB Thumb Drive
Accessing the Connected USB Thumb Drive
Connecting Other Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting a Set-Top Box
Connecting a Gaming Device
Connecting a DVD Player or VCR
Connecting a Computer
Company Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
International Support
Contact Information
Green Initiative
Introduction
VOLUME ±
Press to adjust
the volume.
CHANNEL ±
Press to adjust
the television
channel.
MENU
Press to view
the television
menu.
SOURCE
Press to adjust
between
the available
sources.
POWER
Press to power
the television
o or on.
RF INPUT
RCA AUDIO
INPUT
COMPOSITE
VIDEO INPUT
COMPONENT
VIDEO INPUTS
STEREO
HEADPHONE
JACK
3.5mm PC AUDIO
INPUT
VGA/PC VIDEO
INPUT
HDMI INPUTS
USB PORT
DC POWER INPUT
GPX6
Customer Support: 1-888-999-4215 GPX 7
POWER
Press to power the television o
or on.
SLEEP
Press repeatedly to set the
sleep timer. After the set time
has expired the television will
automatically power o.
ASPECT
Press to adjust the aspect
ratio between FULL, NORMAL,
WATERGLASS, and CINEMA.
PICTURE
Press to adjust the picture
between STANDARD, MOVIE,
USER, and DYNAMIC. The user
mode can be customized by
accessing Picture Settings in the
menu.
SOUND
Press to adjust the sound between
STANDARD, SOFT, USER, and
DYNAMIC. The user mode can be
customized by accessing Sound
Settings in the menu.
VOLUME
Press to adjust the volume.
MENU
Press to view the television setup
menu.
SAP
In TV mode, press to switch to
an alternate audio option when
supported.
DISPLAY
Press to view the on-screen
display.
FAV LIST
In TV mode, press to view your
favorites list.
ADD/ERASE
In TV mode, press to add or erase
the current channel as a favorite.
MUTE
Press to mute the volume.
NUMBER KEYPAD
PREV
In TV mode, press to switch to the
previous channel.
FREEZE
Press to freeze or unfreeze the
current frame in TV mode.
GUIDE
In TV mode, press to view the on-
screen television guide.
CHANNEL
Press to adjust the television
channel.
CC
Press to view the closed
captioning in TV mode.
EXIT
Press to exit the current menu.
ARROW KEYS
ENTER
SOURCE
Press to view the available
television sources. Press the
ARROW and ENTER buttons to
adjust the current television
source.
FAV CH +/-
Press to cycle through saved
favorite channels in TV mode.
TV
Press to switch to TV mode.
PC
Press to switch to PC mode.
AUTO
In PC mode, press to ne tune the
screen position automatically.
CH LIST
In TV mode, press to view a list of
available channels.
GPX8
DC power input: requires an AC/DC power
adapter (included)
Requires 2, AAA size, batteries (included)
OPEN
Setup
Power
Remote Power
Requires stand and 3 machine screws
(all included)
1. Insert a single machine screw through
the bottom of the stand and up into the
television. Tighten by hand using a philips-
head screw driver.
2. Insert the remaining two screws through
the back of the stand and into the television.
Tighten by hand using a philips-head screw
driver.
Connecting the Stand
Customer Support: 1-888-999-4215 GPX 9
Television Setup
Requires a TV antenna (not included).
1. Connect a VHF, UHF, or HDTV antenna to the
RF INPUT on the television.
The Auto Channel Scan must be run before any
channels can be viewed on the television.
2. Press the SOURCE button and switch to TV
mode.
3. Press the MENU button.
4. Use the ARROW buttons to select Channel in
the on-screen menu. Press the ENTER button.
5. Use the ARROW buttons to select Signal Type
in the on-screen menu. Press the ARROW
buttons to change the Signal Type to Air.
6. Use the ARROW buttons to select Auto
Channel Search in the on-screen menu. Press
the ENTER button to automatically scan for
available channels.
Connecting a TV Antenna Connecting a Set-Top Box
Requires a cable connection.
1. Connect a cable to the RF INPUT on the
television.
The Auto Channel Scan must be run before any
channels can be viewed on the television.
2. Press the SOURCE button and switch to TV
mode.
3. Press the MENU button.
4. Use the ARROW buttons to select Channel in
the on-screen menu. Press the ENTER button.
5. Use the ARROW buttons to select Signal Type
in the on-screen menu. Press the ARROW
buttons to change the Signal Type to Cable.
6. Use the ARROW buttons to select Auto
Channel Search in the on-screen menu. Press
the ENTER button to automatically scan for
available channels.
The Auto Channel Scan must be run before any
channels can be viewed on the television.
1. Press the SOURCE button and switch to TV
mode.
2. Press the MENU button.
3. Use the ARROW buttons to select CHANNEL
in the on-screen menu. Press the ENTER
button.
4. Use the ARROW buttons to select Auto
Channel Search in the on-screen menu. Press
the ENTER button to automatically scan for
available channels.
Connecting Basic Cable
Auto Scanning for Channels
Requires a Set-Top Box (not included).
If your Set-Top Box has an HDMI Output:
• Connect the HDMI output on the Set-Top Box
to the HDMI INPUT on the television using
an HDMI cable (not included).
If your Set-Top Box has a Composite Video
Output:
• Connect the video output on the Set-Top
Box to the COMPOSITE VIDEO INPUT on
the television using an A/V RCA cable (not
included). Connect the audio output on the
Set-Top Box to the RCA STEREO AUDIO
INPUT on the television.
If your Set-Top Box has a Component Video
Output:
• Connect the component video output on
the Set-Top Box to the COMPONENT VIDEO
INPUTS on the television using a component
RCA cable (not included). Connect the
audio output on the Set-Top Box to the RCA
STEREO AUDIO INPUT on the television.
After connecting your Set-Top Box:
• Press the SOURCE button to switch between
TV, AV, YPbPr, HDMI 1 or 2, and VGA to match
the connection used.
GPX10
Television
1. Press the SOURCE button to switch to TV
mode.
2. Press the CH LIST button, on the remote, to
view a list of available channels.
Unless you are using a Set-Top Box, you must
auto scan for channels before being able to view
channels in list view.
1. Press the SOURCE button to switch to TV
mode.
2. Press the CHANNEL buttons to select the
desired TV channel.
3. Press the ADD/ERASE button to add or erase
the current channel as a favorite.
1. Press the SOURCE button to switch to TV
mode.
2. Press the FAV LIST button to view a list of
your saved favorites.
Press the MENU button to access the TV menu.
Press the EXIT button to exit the TV menu.
1. Press the SOURCE button to switch to TV
mode.
2. Press the MENU button.
3. Press the ARROW () buttons, highlight
PARENTAL, and press the ENTER button.
4. The default passcode for the parental lock is:
0 0 0 0
5. Enter the passcode to access the PARENTAL
CONTROL preferences.
6. From this menu, you can lock specic ratings
from the United States rating system or the
Canadian rating system by accessing the
V-CHIP settings. You can also lock the buttons
on the television or lock specic sources from
access.
Channel List View
Adding Favorites
Viewing Favorites
Television Menu
Parental Controls (V-Chip)
1. Press the MENU button to access the setup
menu.
2. Press the ARROW () buttons to
highlight the SETUP icon. Press the ENTER
button.
3. Press the ARROW () buttons to
highlight CLOCK. Press the ENTER button.
4. Press the ARROW () buttons to
highlight TIME ZONE. Press the ARROW
() buttons to select your current time
zone.
5. Press the ARROW () buttons to
highlight AUTO CLOCK. Press the ARROW
() buttons to turn auto clock o and on.
When the correct time zone is set, auto clock
will automatically set your clock and date for
you.
6. To set the time and date manually, turn auto
clock o, highlight SETUP TIME, and use the
ARROW and ENTER buttons to manually set
the time and date.
Setting the Clock
Customer Support: 1-888-999-4215 GPX 11
1. Connect a USB thumb drive to the USB PORT
as shown in the image to the right.
1. Follow the instructions for Connecting a USB
Thumb Drive.
2. Press the SOURCE button to switch to Media
mode.
3. Use the ARROW/ENTER buttons to select
and play content from the connected USB
thumb drive.
USB Port
Connecting a USB Thumb Drive
Accessing the Connected USB Thumb Drive
Connecting Other Devices
• You will need: a set-top box, composite
and RCA stereo cables or component and
RCA stereo cables or an HDMI cable. (not
included)
• Connect the set-top box’s audio and video
outputs to the corresponding audio and
video inputs on the television.
• Press the SOURCE button to switch between
TV, AV, YPbPr, HDMI 1 or 2, and VGA to match
the connection used.
• You will need: a DVD player or VCR,
composite and RCA stereo cables or
component and RCA stereo cables or an
HDMI cable.
• Connect the DVD player or VCR’s audio and
video outputs to the corresponding audio and
video inputs on the television.
• Press the SOURCE button to switch between
TV, AV, YPbPr, HDMI 1 or 2, and VGA to match
the connection used.
• You will need: a gaming device, composite
and RCA stereo cables or component and
RCA stereo cables or an HDMI cable. (not
included)
• Connect the gaming device’s audio and video
outputs to the corresponding audio and
video inputs on the television.
• Press the SOURCE button to switch between
TV, AV, YPbPr, HDMI 1 or 2, and VGA to match
the connection used.
• You will need: a PC with a VGA output, and a
VGA cable. (not included)
• Connect the computer’s VGA output to the
VGA/PC INPUT on the television.
• Power the television on and press the
SOURCE button to switch to the VGA Mode.
• Audio from the connected PC can be input
to the television through the TV’s PC AUDIO
INPUT by using a 3.5mm audio cable (not
included).
Connecting a Set-Top Box Connecting a DVD Player or VCR
Connecting a Gaming Device Connecting a Computer
Copyright © 2010 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners.
Specications are subject to change without notice
Company Information
Environmental Commitment to ‘Protect for Today
and Sustain for Tomorrow’
2009 marked the ocial launch of DPI, Inc.’s
corporate campaign for a greener and cleaner
world. DPI is building upon environmental
initiatives introduced at all of their facilities
to help formulate and sustain signicant and
important conservation eorts within its
manufacturing and marketing communities.
In addition to targeting and selecting energy
ecient product features, and structuring ‘green
oce’ procedures, other initial program eorts
include:
• Reduction of all packaging sizes
• Recyclable plastics for clamshell packages,
with a plan to eventually replace plastic with
recyclable paper
• Recycled ber board in place of the polyfoam
in packing boxes
• Recycled plastics in place of the virgin
material in product construction
To download this User’s Guide in English,
Spanish, or French, visit the support section at
www.gpx.com.
Para transferir esta guía de usuario en inglés,
español, o francés, visite la sección de la ayuda
en www.gpx.com.
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol, ou français, visitez la section
de soutien chez www.gpx.com.
Phone:
1-888-999-4215
Email:
prodinf[email protected]om
Parts Email:
partsinf[email protected]
Website:
www.gpx.com
Green InitiativeInternational Support
Contact Information
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

GPX TE2280 Manuel utilisateur

GPX
Marque
GPX
Modèle
TE2280
Catégorie
Téléviseurs LCD
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes