GPX TL1920 Manuel utilisateur

Marque: GPX

Modèle: TL1920

Catégorie: Téléviseurs LCD

Taper: Manuel utilisateur

Ce manuel convient également à

TL1920B

USER’S GUIDE

V:0916-0628-10

For the most up-to-date version of this User’s Guide, go to www.gpx.com

TL1920

19” HDTV

GPX2

 Lithium batteries, like all rechargeable

batteries are recyclable and should be recycled or

disposed of in normal household waste. Contact your

local government for disposal or recycling practices in

your area. They should never be incinerated since they

might explode.

 : Shock hazard - Do Not Open.

• AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS

OUVRIR

Mains plug is used as disconnect device and it should

remain readily operable during intended use. In order

to disconnect the apparatus from the mains completely,

the mains plug should be disconnected form the mains

socket outlet completely.

La prise du secteur est utilisé pour déconnecter le

système.

La prise du secteur ne doit pas être obstruée ou doit être

facilement accessible pendant son utilisation. Pour être

complètement déconnecté de l’alimentation d’entrée, la

prise doit être débranchée du secteur.

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc), or

rechargeable (ni-cad, ni-mh, etc) batteries.

No mezcle baterías viejas y nuevas.

No mezcle baterías alcalinas, estándar (carbono-zinc) o

recargables (ni-cad, ni-mh, etc.).

 : TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

 To reduce the risk of re or electric shock,

do not expose this apparatus to rain or moisture.

  Pour réduire le risque d’incendie

ou de choc électrique, ne pas exposer cet appareil sous la

pluie et l’humidité.

  Use of controls or adjustments or

performance of procedures other than those specied

may result in hazardous radiation exposure.

  Changes or modications to this unit

not expressly approved by the party responsible for

compliance could void the user’s authority to operate the

equipment.

  Do not place the unit on top of any soft,

porous, or sensitive surfaces to avoid damaging the

surface. Use a protective barrier between the unit and

surface to protect the surface.

  Use of this unit near uorescent lighting

may cause interference regarding use of the remote. If

the unit is displaying erratic behavior move away from

any uorescent lighting, as it may be the cause.

 Danger of explosion if battery is incorrectly

replaced. Replace only with the same or equivalent type.

• PRÉCAUTION: Danger d’explosion si les piles sont

remplacées de façon incorrect. Remplacer les piles

seulement par le même type de pile ou l’équivalent.

  There is a danger of explosion if you

attempt to charge standard Alkaline batteries in the unit.

Only use rechargeable NiMH batteries.

  The remote control’s button cell battery

contains mercury. Do not put in the trash, instead recycle

or dispose of as hazardous waste

The lightning ash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of

sufcient magnitude to constitute a risk of electric

shock to persons.

WARNING: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

ATTENTION

RISQUE D' ÉLECTROCUTION

NE PAS OUVRIR

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

Warnings and Precautions

Customer Support: 1-888-999-4215 GPX 3

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally,

or has been dropped.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

• The apparatus shall not be exposed to dripping or splashing and

that no objects lled with liquids, such as vases, shall be placed

on apparatus.

L’appareil ne doit pas être exposé aux écoulements ou aux

éclaboussures et aucun objet ne contenant de liquide, tel qu’un

vase, ne doit être placé sur l’objet.

• Main plug is used as disconnect device and it should remain

readily operable during intended use. In order to disconnect the

apparatus from the mains completely, the mains plug should be

disconnected form the mains socket outlet completely.

La prise du secteur ne doit pas être obstruée ou doit être

facilement accessible pendant son utilisation. Pour être

complètement déconnecté de l’alimentation d’entrée, la prise doit

être débranchée du secteur.

• Battery shall not be exposed to excessive heat such as sunshine,

re or the like.

Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à

la lumière du soleil, au feu ou autres choses de semblable.

• Caution marking is located at the rear or back of the apparatus.

Attention marquage est situé à l’arrière ou à l’arrière de

l’appareil

• The marking information is located at the rear or back of

apparatus.

Les informations de marquage est situé à l’arrière ou à l’arrière

de l’appareil.

FCC Warnings

Additional Warnings

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding - type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety.

When the provided plug does not t into your outlet,

consult an electrician for replacement of the obsolete

outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specied by the

manufacturer.

12.

This symbol indicates that this product

incorporates double insulation between

hazardous mains voltage and user

accessible parts.

Use only with a cart, stand, tripod,

bracket, or table specied by the

manufacturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

Important Safety Instructions

• 19” LCD TV

• ATSC/NTSC tuner

• Electronic program guide

• TV supports: 480p, 480i, 720p, 1080p, 1080i

• Display resolution: 1366x768

• Viewing Angle: 170(H)x160(V)

• Contrast: 1000:1

• Brightness: 300cd/m

• Response time: 8ms

• Color: max 16.7M

• Multi-Language OSD

• Sleep timer

• Upconversion to screen resolution

• USB port 2.0, high speed

• A/V input, RCA type

• RF input for tuner

• VGA/PC input

• HDMI input

• Built-In speakers

• Remote control: requires 2, AAA size,

batteries (included)

• AC power: requires an AC power cable

(included)

• Remote control: requires 2, AAA size,

batteries (included)

• Removable stand: requires 3 screws

(included)

• AC power cable

Features Included

19” HDTV

GPX4

Customer Support: 1-888-999-4215 GPX 5

TABLE OF CONTENTS

Warnings and Precautions . . . . . . . . . . 2

Important Safety Instructions . . . . . . . . . 3

• FCC Warnings

• Additional Warnings

19” HDTV . . . . . . . . . . . . . . 4

• Features

• Included

Introduction . . . . . . . . . . . . . 6

Setup . . . . . . . . . . . . . . . 8

• Power

• Remote

• TV Stand

Television Setup . . . . . . . . . . . . 9

• Connecting a TV Antenna

• Connecting a Set-Top Box

• Connecting Basic Cable

Television . . . . . . . . . . . . . 10

• Auto Scanning for Channels

• Channel List View

• Adding Favorites

• Viewing Favorites

• Parental Controls (V-Chip)

Television . . . . . . . . . . . . . 11

• Setting the Clock

• Television Menu

Connecting Other Devices (Set-Top Box, Gaming Device, DVD

Player, VCR, or PC) . . . . . . . . . . . 12

• Connecting a Set-Top Box

• Connecting a Gaming Device

• Connecting a DVD Player or VCR

• Connecting a Computer

USB Port . . . . . . . . . . . . . 14

• Connecting a USB Thumb Drive

• Using a Connected USB Thumb Drive

Company Information . . . . . . . . . . 16

• Green Initiative

• International Support

• Contact Information

Introduction

VGA/PC IN

VOLUME

Press to adjust the

volume.

CHANNEL

Press to adjust the

television channel.

Press to access the

television menu.

POWER

Press to power

the television o

or on.

SOURCE

Press to adjust the

television source.

HDMI INPUT

PC AUDIO INPUT

VGA/PC INPUT

COMPONENT

VIDEO INPUT

S-VIDEO INPUT

COMPOSITE

VIDEO INPUT

RCA AUDIO

INPUT

STEREO

HEADPHONE

JACK

RF INPUT

GPX6

USB PORT

Use to connect a USB thumb drive or

for software updates.

Customer Support: 1-888-999-4215 GPX 7

10+

CH LIST

FAV CH -FAV CH +

FAV LIST

SOURCE

DISPLAY

ADD/ERASE

VOLUME CHANNEL

SOUND

PICTURE

MUTE

POWER

AUTO

POWER

Press to power the television o or on.

SLEEP

Press repeatedly to set the sleep timer.

After the set time has expired the television

will automatically power o.

ASPECT

Press to adjust the aspect ratio between

FULL, NORMAL, WATERGLASS, and CINEMA.

PICTURE

Press to adjust the picture between

STANDARD, MOVIE, USER, and DYNAMIC.

The user mode can be customized by

accessing Picture Settings in the menu.

SOUND

Press to adjust the sound between

STANDARD, SOFT, USER, and DYNAMIC. The

user mode can be customized by accessing

Sound Settings in the menu.

VOLUME

Press to adjust the volume.

Press to view the television setup menu.

SAP

In TV mode, press to switch to an alternate

audio option when supported.

DISPLAY

Press to view the on-screen display.

FAV LIST

In TV mode, press to view your favorites list.

ADD/ERASE

In TV mode, press to add or erase the

current channel as a favorite.

CH LIST

In TV mode, press to view a list of

available channels.

AUTO

In PC mode, press to ne tune the position

of the screen automatically.

MUTE

Press to mute the volume.

NUMBER KEYPAD

In TV mode, press to switch to the previous

channel.

FREEZE

Press to freeze or unfreeze the current

frame in TV mode.

GUIDE

In TV mode, press to view the on-screen

television guide.

CHANNEL

Press to adjust the television channel.

Press to view the closed captioning in TV

mode.

EXIT

Press to exit the current menu.

ARROW KEYS

ENTER

SOURCE

Press to view the available television

sources. Press the ARROW and ENTER

buttons to adjust the current television

source.

FAV CH +/-

Press to cycle through saved favorite

channels in TV mode.

Press to switch to PC mode.

Press to switch to TV mode.

GPX8

AC power: requires an AC power cord (included).

Plug the included AC power cord into a standard

AC power outlet to power the television.

Setup

Power

Requires 2, AAA size, batteries (included)

OPEN

Remote

Requires TV stand and 3 screws (included). Use a philips-head screwdriver to tighten the screws.

Using an power drill could damage the TV stand.

TV Stand

Customer Support: 1-888-999-4215 GPX 9

Requires a TV antenna (not included).

1. Connect a VHF, UHF, or HDTV antenna to the

RF INPUT on the television.

2. Press the SOURCE button to switch to TV

mode.

3. Press the MENU button to access the setup

menu.

4. Press the ARROW () buttons to

highlight the CHANNEL icon. Press the

ENTER button.

5. Press the ARROW () buttons to

highlight SIGNAL TYPE. Press the ARROW

() buttons to select AIR.

6. Press the ARROW () buttons to

highlight AUTO CHANNEL SEARCH. Press

the ENTER button to begin scanning for

available channels.

Television Setup

Connecting a TV Antenna

Connecting a Set-Top Box

Requires a cable connection.

1. Connect a cable to the RF INPUT on the

television.

2. Press the SOURCE button to switch to TV

mode.

3. Press the MENU button to access the setup

menu.

4. Press the ARROW () buttons to highlight

the CHANNEL icon. Press the ENTER button.

5. Press the ARROW () buttons to highlight

SIGNAL TYPE. Press the ARROW ()

buttons to select AIR.

6. Press the ARROW () buttons to highlight

AUTO CHANNEL SEARCH. Press the ENTER

button to begin scanning for available

channels.

Connecting Basic Cable

Requires a Set-Top Box (not included).

If your Set-Top Box has an HDMI Output:

• Connect the HDMI output on the Set-Top Box to the HDMI INPUT on the television using an

HDMI cable (not included).

If your Set-Top Box has a Composite Video Output:

• Connect the video output on the Set-Top Box to the COMPOSITE VIDEO INPUT on the

television using an A/V RCA cable (not included). Connect the audio output on the Set-Top Box

to the RCA AUDIO INPUT on the television.

If your Set-Top Box has a Component Video Output:

• Connect the component video output on the Set-Top Box to the COMPONENT VIDEO INPUT

on the television using a component RCA cable (not included). Connect the audio output on the

Set-Top Box to the RCA AUDIO INPUT on the television.

After connecting your Set-Top Box:

• Press the SOURCE button to switch to YPBPR, S-VIDEO, AV, or HDMI to match the connection

used.

GPX10

1. Press the SOURCE button to switch to TV mode.

2. Press the CH LIST button, on the remote, to view a list of

available channels.

Unless you are using a Set-Top Box, you must auto scan for

channels before being able to view channels in list view.

1. Press the SOURCE button to switch to TV mode.

2. Press the CHANNEL buttons to select the desired TV channel.

3. Press the ADD/ERASE button to add or erase the current

channel as a favorite.

1. Press the SOURCE button to switch to TV mode.

2. Press the FAV LIST button to view a list of your saved favorites.

1. Press the SOURCE button to switch to TV mode.

2. Press the MENU button.

3. Press the ARROW () buttons, highlight PARENTAL, and

press the ENTER button.

4. The default passcode for the parental lock is:

0 0 0 0

5. Enter the passcode to access the PARENTAL CONTROL

preferences.

6. From this menu, you can lock specic ratings from the

United States rating system or the Canadian rating system by

accessing the V-CHIP settings. You can also lock the buttons on

the television or lock specic sources from access.

Television

Channel List View

Adding Favorites

Viewing Favorites

Parental Controls (V-Chip)

Auto Scanning for Channels

The Auto Channel Scan must be run before any channels can be

viewed on the television.

1. Press the SOURCE button to switch to TV mode.

2. Press the MENU button to access the setup menu.

3. Press the ARROW () buttons to highlight the CHANNEL

icon. Press the ENTER button.

4. Press the ARROW () buttons to highlight SIGNAL TYPE.

Press the ARROW () buttons to select AIR.

5. Press the ARROW () buttons to highlight AUTO CHANNEL

SEARCH. Press the ENTER button to begin scanning for

available channels.

Customer Support: 1-888-999-4215 GPX 11

Press the MENU button to access the TV menu.

Press the EXIT button to exit the TV menu.

Picture

Picture Settings

Screen Settings

PC Settings

Color Temperature

Advanced Picture Settings

Sound

Sound Settings

Surround Mode

Analog Sound

Digital Sound

Other Settings

Channel

Channel List

Favorite List

Channel Setting

Signal Type

Auto Channel Search

Parental

Lock Parental Control

V-Chip

Change Password

Front Panel Lock

Source Lock

Setup

Closed Caption

Menu Languag

Clock

Others

Blue Back

No Signal Power O

No Operation Power O

All Reset

Audio Only

Television

Television Menu

1. Press the MENU button to access the setup

menu.

2. Press the ARROW () buttons to

highlight the SETUP icon. Press the ENTER

button.

3. Press the ARROW () buttons to

highlight CLOCK. Press the ENTER button.

4. Press the ARROW () buttons to

highlight TIME ZONE. Press the ARROW

() buttons to select your current time

zone.

5. Press the ARROW () buttons to

highlight AUTO CLOCK. Press the ARROW

() buttons to turn auto clock o and on.

When the correct time zone is set, auto clock

will automatically set your clock and date for

you.

6. To set the time and date manually, turn auto

clock o, highlight SETUP TIME, and use the

ARROW and ENTER buttons to manually set

the time and date.

Setting the Clock

GPX12

Connecting Other Devices (Set-Top Box, Gaming Device, DVD Player, VCR, or PC)













HDMI



• You will need: a set-top box, s-video and RCA

stereo cables or composite and RCA stereo

cables or component and RCA stereo cables

or an HDMI cable. (not included)

• Connect the set-top box’s audio and video

outputs to the corresponding audio and

video inputs on the television.

• Power the television on and press the

SOURCE button to switch to the connected

input. (AV (composite), YPbPr (component),

S-VIDEO, or HDMI)

• You will need: a DVD player or VCR, s-video

and RCA stereo cables or composite and RCA

stereo cables or component and RCA stereo

cables or an HDMI cable.

• Connect the DVD player or VCR’s audio and

video outputs to the corresponding audio and

video inputs on the television.

• Power the television on and press the

SOURCE button to switch to the connected

input. (AV (composite), YPbPr (component),

S-VIDEO, or HDMI)

• You will need: a gaming device, s-video and

RCA stereo cables or composite and RCA

stereo cables or component and RCA stereo

cables or an HDMI cable. (not included)

• Connect the gaming device’s audio and video

outputs to the corresponding audio and

video inputs on the television.

• Power the television on and press the

SOURCE button to switch to the connected

input. (AV (composite), YPbPr (component),

S-VIDEO, or HDMI)

Connecting a Set-Top Box

Connecting a DVD Player or VCR

Connecting a Gaming Device

Customer Support: 1-888-999-4215 GPX 13





• You will need: a PC with a VGA output, and a

VGA cable. (not included)

• Connect the computer’s VGA output to the

VGA/PC INPUT on the television.

• Power the television on and press the

SOURCE button to switch to the PC Mode.

• Audio from the connected PC can be input

to the television through the TV’s PC AUDIO

INPUT by using a 3.5mm audio cable (not

included).

Connecting a Computer

GPX14

USB Port

1. Load a USB thumb drive into the USB PORT

as shown in the image to the right.

Connecting a USB Thumb Drive

1. Follow the instructions for Connecting a USB

thumb drive.

2. Press the SOURCE button to switch to Media

mode.

3. Press the USB/SD button on the remote to

switch to the connected USB thumb drive.

4. Use the ARROW and ENTER buttons to select

and play content from the connected USB

thumb drive.

The USB PORT can also be used to upgrade the

televisions rmware. For detailed instructions

and the latest software, go to www.gpx.com

Using a Connected USB Thumb Drive

VGA/PC IN

Customer Support: 1-888-999-4215 GPX 15

Specications are subject to change without notice

GPX TL1920 Manuel utilisateur

Marque: GPX

Modèle: TL1920

Catégorie: Téléviseurs LCD

Taper: Manuel utilisateur

Ce manuel convient également à

TL1920B

Télécharger le PDF

rapport

dans d''autres langues

English: GPX TL1920 User manual

GPX TL1920 Manuel utilisateur

Ce manuel convient également à

GPX TL1920 Manuel utilisateur

dans d''autres langues

Documents connexes