LG 28LJ4540 Le manuel du propriétaire

Marque: LG

Modèle: 28LJ4540

Catégorie: Téléviseurs LCD

Taper: Le manuel du propriétaire

Ce manuel convient également à

P/No: MFL69740201 (1704-REV01)

LED TV

TÉLÉVISEUR DEL

TV MONITOR LED

22LJ4540

24LJ4540

28LJ4540

24LF454B

www.lg.com

English Read Safety and Reference.

Français Lire le document Sécurité et références.

Español Leer Seguridad y Consultas.

English

Easy Setup Guide

Please read this manual carefully before operating your set and retain it for future reference.

Français

Guide de conguration rapide

Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter

ultérieurement.

Español

Guía Rápida de Conguración

Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.

*MFL69740201*

AAA

X 4

(M4 X L10)

Depending on model

Selon le modèle

Según el modelo

1 2

USB IN

5 V 0.5 A

(Time Machine Ready)

ANTENNA

/CABLE IN

HDMI IN

-IN

(19 V )

HDMI OUT

ERVIC

NLY

ERVICE

NLY

USB IN

5 V 0.5 A

ERVIC

NLY

ERVICE

NLY

USB IN

5 V 0.5 A

ERVIC

22/24LJ4540

24LF454B

28LJ4540

MODELS 22LJ4540 24LJ4540 / 24LF454B 28LJ4540

Dimensions

(W x H x D)

With stand

507.6 x 358.0 x 146.3 (mm) 556.0 x 387.3 x 146.3 (mm) 641.5 x 435.5 x 186.1 (mm)

19.9 x 14.0 x 5.7 (inches) 21.8 x 15.2 x 5.7 (inches) 25.2 x 17.1 x 7.3 (inches)

Without stand

507.6 x 316.5 x 52.7 (mm) 556.0 x 345.2 x 53.1 (mm) 641.5 x 396.3 x 57.5 (mm)

19.9 x 12.4 x 2.0 (inches) 21.8 x 13.5 x 2.0 (inches) 25.2 x 15.6 x 2.2 (inches)

Weight

With stand

3.0 kg (6.6 lbs) 3.4 kg (7.4 lbs) 4.7 kg (10.3 lbs)

Without stand

2.9 kg (6.3 lbs) 3.2 kg (7.0 lbs) 4.5 kg (9.9 lbs)

MODÈLES 22LJ4540 24LJ4540 / 24LF454B 28LJ4540

Dimensions

(L x H x P)

Avec support

507,6 x 358,0 x 146,3 (mm) 556,0 x 387,3 x 146,3 (mm) 641,5 x 435,5 x 186,1 (mm)

19,9 x 14,0 x 5,7 (po) 21,8 x 15,2 x 5,7 (po) 25,2 x 17,1 x 7,3 (po)

Sans support

507,6 x 316,5 x 52,7 (mm) 556,0 x 345,2 x 53,1 (mm) 641,5 x 396,3 x 57,5 (mm)

19,9 x 12,4 x 2,0 (po) 21,8 x 13,5 x 2,0 (po) 25,2 x 15,6 x 2,2 (po)

Poids

Avec support

3,0 kg (6,6 lb) 3,4 kg (7,4 lb) 4,7 kg (10,3 lb)

Sans support

2,9 kg (6,3 lb) 3,2 kg (7,0 lb) 4,5 kg (9,9 lb)

MODELOS 22LJ4540 24LJ4540 / 24LF454B 28LJ4540

Dimensiones

(Ancho x Altura x

Profundidad)

Con base

507,6 x 358,0 x 146,3 (mm) 556,0 x 387,3 x 146,3 (mm) 641,5 x 435,5 x 186,1 (mm)

Sin base

507,6 x 316,5 x 52,7 (mm) 556,0 x 345,2 x 53,1 (mm) 641,5 x 396,3 x 57,5 (mm)

Peso

Con base 3,0 (kg) 3,4 (kg) 4,7 (kg)

Sin base 2,9 (kg) 3,2 (kg) 4,5 (kg)

Consumo de energía

(Condición predeterminada)

24 W 26 W 28 W

Consumo de energía

19 V

1,2 A 19 V 1,6 A

Adaptador de

CA-CC

Entrada AC 100 – 240 V ~ 50/60 Hz AC 100 – 240 V ~ 50/60 Hz

Salida 19 V

1,3 A 19 V 1,7 A

English

Français

Español

DC-IN

(19 V )

DC-IN

(19V )

OWNER’S MANUAL

Safety and Reference

LED TV*

*Disclaimer

LG LED TVs are LCD TVs with LED backlighting.

Printed in Korea

P/No : MFL69376203 (1812-REV05)

www.lg.com

*MFL69376203*

Please read this manual carefully before operating your TV and

retain it for future reference.

22LJ4540

24LJ4540

28LJ4540

24LF454B

ENGLISH

TABLE OF CONTENTS

3 Important safety instructions

7 Licenses

7 Open source software notice

information

7 Preparing

8 Lifting and moving the TV

8 Setting up the TV

8 Using the joystick button

8 Basic Functions

9 Adjusting the Menu

9 Mounting on a table

9 Using the kensington security

system (optional)

10 Mounting on a wall

11 Connections (Notifications)

11 Connecting to an antenna or cable

11 Other connections

12 Remote control

13 Settings

15 To see web manual

16 Troubleshooting

17 Specifications

19 Regulatory

ENGLISH

Important safety instructions

Always comply with the following precautions

to avoid dangerous situations and ensure peak

performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence of

uninsulated dangerous voltage within the

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended to alert the

user to the presence of important operating

and maintenance (servicing) instructions in the

literature accompanying the device.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may

be seriously injured or there is a possibility of

accident or death.

CAUTION

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

The note helps you understand and use the

product safely. Please read the note carefully

before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade or

the third prong are provided for your safety. If

the provided plug does not fit into your outlet,

consult an electrician for replacement of the

obsolete outlet.

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

ENGLISH

• Only use attachments/accessories specified by the

manufacturer.

• Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

• Unplug this apparatus during lightning storms or

when unused for long periods of time.

• Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• Do not press strongly upon the panel with a hand

or a sharp object such as a nail, pencil, or pen, or

make a scratch on it.

• Do not stick metal objects or any other conductive

material into the power cord. Do not touch the end

of the power cord while it is plugged in.

• Keep the packing anti-moisture material or vinyl

packing out of the reach of children. Anti-moisture

material is harmful if swallowed. If swallowed,

induce vomiting and go to the nearest hospital.

Additionally, vinyl packing can cause suffocation.

Keep it out of the reach of children.

• CAUTION concerning the Power Cord

(Can differ by country):

Check the specification page of this owner’s

manual to be certain concerning current

requirements. Do not connect too many devices

to the same AC power outlet as this could result in

fire or electric shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged wall

outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or fire. Periodically examine the cord of your

device, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

device, and have the cord replaced with an exact

replacement part by an authorized servicer. Protect

the power cord from physical or mechanical abuse,

such as being twisted, kinked, pinched, closed in

a door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where the

cord exits the device. Do not move the TV with the

power cord plugged in. Do not use a damaged or

loose power cord. Be sure do grasp the plug when

unplugging the power cord. Do not pull on the

power cord to unplug the TV.

• Warning - To reduce the risk of fire or electrical

shock, do not expose this product to rain, moisture

or other liquids. Do not touch the TV with wet

hands. Do not install this product near flammable

objects such as gasoline or candles, or expose the

TV to direct air conditioning.

• Do not expose to dripping or splashing and do

not place objects filled with liquids, such as vases,

cups, etc. on or over the apparatus (e.g., on shelves

above the unit).

ENGLISH

• Grounding

- (Except for devices which are not grounded.)

Ensure that you connect the earth ground wire

to prevent possible electric shock (i.e., a TV

with a three-prong grounded AC plug must

be connected to a three-prong grounded AC

outlet).

If grounding methods are not possible, have

a qualified electrician install a separate circuit

breaker. Do not try to ground the unit by

connecting it to telephone wires, lightning

rods, or gas pipes.

Circuit

Breaker

Power

Supply

• As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if the unit is turned off.

• Do not attempt to modify this product in any

way without written authorization from LG

Electronics. Unauthorized modification could

void the user’s authority to operate this product.

• Outdoor Antenna Grounding

- (Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity of

overhead power lines or other electric light or

power circuits, or where it can come in contact

with such power lines or circuits as death or

serious injury can occur. Be sure the antenna

system is grounded to provide some protection

against voltage surges and built-up static

charges. Section 810 of the National Electrical

Code (NEC) in the U.S.A. provides information

with respect to proper grounding of the mast

and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size

of grounding conductors, location of antenna

discharge unit, connection to grounding

electrodes, and requirements for the grounding

electrode.

• Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code

• Cleaning

- When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other liquids

directly on the TV as electric shock may occur.

Do not clean with chemicals such as alcohol,

thinners, or benzene.

• Moving

- Make sure the product is turned off, unplugged,

and all cables have been removed. It may take 2

or more people to carry larger TVs. Do not press

or put stress on the front panel of the TV.

• Ventilation

- Install your TV where there is proper ventilation.

Do not install in a confined space such as a

bookcase. Do not cover the product with cloth

or other materials while plugged in. Do not

install in excessively dusty places.

• If you smell smoke or other odors coming from

the TV, unplug the power cord and contact an

authorized service center.

• If water or another substance enters the

product (like an AC adapter, power cord, or TV),

disconnect the power cord and contact the

service center immediately. Otherwise, this may

result in fire or electric shock.

• Use only an authorized AC adapter and power

cord approved by LG Electronics.

Otherwise, this may result in fire, electric shock,

malfunction, or product deformation.

• Never disassemble the AC adapter or power

cord. This may result in fire or electric shock.

ENGLISH

• Handle the adapter carefully to avoid dropping

or striking it. An impact could damage the

adapter.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during a

lightning storm.

• When mounting a TV on the wall, make sure not

to install the TV by hanging the power and signal

cables on the back of the TV.

• Do not allow an impact shock or any objects to

fall into the product, and do not drop anything

onto the screen.

• DISCONNECTING THE DEVICE FROM THE MAIN

POWER

The power plug is the disconnecting device.

In case of an emergency, the power plug must

remain readily accessible.

• Make sure the power cord is connected securely

to the power plug on the TV.

• Batteries

Store the accessories (battery, etc.) in a safe

location out of the reach of children.

• This apparatus uses batteries. In your community

there might be regulations that require you

to dispose of these batteries properly due to

environmental considerations. Please contact

your local authorities for disposal or recycling

information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow the

batteries to overheat.

• Do not use high voltage electrical equipment

near the TV, (e.g., a bug zapper).

This may result in product malfunction.

• Dot Defect

- The panel is a high technology product with

resolution of two million to six million pixels. In

a very few cases, you could see fine dots on the

screen while you’re viewing the TV. Those dots

are deactivated pixels and do not affect the

performance and reliability of the TV.

• Generated Sound

- Cracking noise A cracking noise that occurs

when watching or turning off the TV is

generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

- Electrical circuit humming/panel buzzing

A low level noise is generated from a high-

speed switching circuit, which supplies a

large amount of current to operate a product.

It varies depending upon the product.

This generated sound does not affect the

performance and reliability of the product.

• Take care not to touch the ventilation openings.

When watching the TV for a long period, the

ventilation openings may become hot. This does

not affect the performance of the product or

cause defects in the product.

• Do not install this product on a wall if it could be

exposed to oil or oil mist. This may damage the

product and cause it to fall.

• If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This is

normal; there is nothing wrong with TV. Some

minute dot defects may be visible on the screen,

appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the TV’s

performance. Avoid touching the LCD screen or

holding your finger(s) against it for long periods

of time. Doing so may produce some temporary

distortion effects on the screen.

• Displaying a still image for a prolonged time may

cause image sticking. Avoid displaying a fixed

image on the TV screen for a long period of time.

ENGLISH

Licenses

Supported licenses may differ by model.

For more information about licenses,

visit www.lg.com

Manufactured under license from Dolby

Laboratories. Dolby, Dolby Vision, Dolby Audio,

and the double-D symbol are trademarks of

Dolby Laboratories.

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

Open source software notice

information

To obtain the source code under GPL, LGPL, MPL,

and other open source licenses, that is contained in

this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices

are available for download.

LG Electronics will also provide open source code

to you on CD-ROM for a charge covering the cost

of performing such distribution (such as the cost of

media, shipping, and handling) upon email request

[email protected]om

. This offer is valid for three

(3) years from the date on which you purchased

the product.

Preparing

NOTE

[Depending upon model]

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.

• The available menus and options may differ from

the input source or product model that you are

using.

• New features may be added to this TV in the

future.

• The items supplied with your product may vary

depending upon the model.

• Product specifications or contents of this manual

may be changed without prior notice due to

upgrade of product functions.

• For an optimal connection, HDMI cables and USB

devices should have bezels less than 10 mm

(0.3 inches) thick and 18 mm (0.7 inches) width.

• Use an extension cable that supports USB 2.0 if

the USB cable or USB flash drive does not fit into

your TV’s USB port.

• Use a certified cable with the HDMI logo

attached. If you do not use a certified HDMI

cable, the screen may not display or a

connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI®/

cable

- High-Speed HDMI®/

cable with Ethernet

*A 10 mm (0.3 inches)

*B 18 mm (0.7 inches)

CAUTION

• Do not use any unapproved items to ensure the

safety and product’s lifespan.

• Any damages or injuries by using unapproved

items are not covered by the warranty.

• Some models appear to have a thin film on the

screen. It is actually part of the screen; do not

remove it.

• When attaching the stand to the TV set, place

the screen facing down on a cushioned table or

flat surface to protect the screen from scratches.

ENGLISH

Lifting and moving the TV

When moving or lifting the TV, read the following

to prevent the TV from being scratched or

damaged and for safe transportation regardless of

its type and size.

• It is recommended to move the TV in the box or

packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the

power cord and all cables.

• When holding the TV, the screen

should face away from you to

avoid damage.

• Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part,

speaker, or speaker grille area.

• When transporting the TV, do not expose the TV

to jolts or excessive vibration.

• When transporting the TV, keep the TV upright;

never turn the TV on its side or tilt towards the

left or right.

• When handling the TV, be careful not to damage

the protruding buttons.

CAUTION

• Avoid touching the screen at all times, as this

may result in damage to the screen.

• Do not place the product on the floor with its

front facing down without padding. Failure to do

so may result in damage to the screen.

Setting up the TV

CAUTION

• When attaching the stand to the TV set, place

the screen facing down on a cushioned table or

flat surface to protect the screen from scratches.

• Do not carry the monitor upside-down by

holding the stand body (or stand base) as this

may cause it to fall off, resulting in damage or

injury.

• Do not apply foreign substances (oils, lubricants,

etc.) to the screw parts when assembling the

product. (Doing so may damage the product.)

NOTE

• Lift up the latch at the bottom of the stand base

and detach the stand base from the TV.

Using the joystick button

(Image shown may differ from your TV.)

You can operate the TV by pressing the button or

moving the joystick left, right, up, or down.

Basic Functions

Power On (Press)

Power Off (Press and Hold)

Volume Control

Channels Control

1 If the menu button is on the screen, pressing

and holding the joystick button will let you exit

the menu.

ENGLISH

Adjusting the Menu

When the TV is turned on, press button one time.

You can adjust the Menu items pressing or moving

the buttons.

Turns the power off.

Accesses the main menu.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

NOTE

• If you press the joystick button first, you may

not be able to adjust the volume level and saved

programmes.

CAUTION

• When your finger over the joystick button and

push it to the up, down, left or right, be careful

not to press the joystick button.

Mounting on a table

1 Lift and tilt the TV into its upright position on a

table.

- Leave a 100 mm (3.9 inches) (minimum) space

from the wall for proper ventilation.

100 mm

(3.9 inches)

100 mm

2 Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources of heat,

as this may result in fire or other damage.

Using the kensington security

system (optional)

(Depending upon model)

The Kensington security system connector is

located at the rear of the TV. For more information

of installation and using, refer to the manual

provided with the Kensington security system or

visit

http://www.kensington.com

Connect the

Kensington security system cable between the TV

and a table.

NOTE

• The Kensington security system is optional. You

can obtain additional accessories from your local

dealer.

ENGLISH

Mounting on a wall

An optional wall mount can be used with your

LG Television. Consult with your local dealer for

a wall mount that supports the VESA standard

used by your TV model. Carefully attach the wall

mount bracket at the rear of the TV. Install the wall

mount bracket on a solid wall perpendicular to the

floor. If you are attaching the TV to other building

materials, please contact qualified personnel to

install the wall mount. Detailed instructions will

be included with the wall mount. We recommend

that you use an LG brand wall mount. The LG wall

mount is easy to adjust or to connect the cables.

When you do not use LG’s wall mount bracket,

use a wall mount bracket where the device is

adequately secured to the wall with enough space

to allow connectivity to external devices. If you are

using a non-adjustable mount, attach the mount

to the wall. Attach the cables to the TV first, then

attach the TV to the mount.

100 mm

(3.9 inches)

100 mm

Make sure to use screws and wall mounts that

meet the VESA standard. Standard dimensions for

the wall mount kits are described in the following

table.

Model

22LJ4540

24LJ4540

24LF454B

28LJ4540

VESA (A x B)

75 x 75 100 x 100

Standard screw M4

Number of

screws

Wall mount

bracket

(optional)

RW120

CAUTION



Must use the enclosed screw in the box.

(Depending on model)



Disconnect the power before moving or

installing the TV. Otherwise electric shock may

occur.



Remove the stand before installing the TV on a

wall mount by performing the stand attachment

in reverse.



If you install the TV on a ceiling or slanted wall,

it may fall and result in severe injury. Use an

authorized LG wall mount and contact the local

dealer or qualified personnel. When using a

third-party wall mount, it is not covered by the

warranty.



Do not overtighten the screws as this may cause

damage to the TV and void your warranty.



Use the screws and wall mounts that meet the

VESA standard. Any damages or injuries by

misuse or using an improper accessory are not

covered by the warranty.



Screw length from outer surface of back cover

should be under 8 mm (0.3 inches).

Wall mount Pad

Back Cover

Standard

screw

: M4 x L10

Wall mount Pad

Back Cover

Max.8 mm

(0.3 inches)

NOTE



Use the screws that are listed on the VESA

standard screw specifications.



The wall mount kit includes an installation

manual and necessary parts.



The wall mount bracket is optional. You can

obtain additional accessories from your local

dealer.



The length of screws may differ depending upon

the wall mount. Make sure to use the proper

length.



For more information, refer to the manual supplied

with the wall mount.

ENGLISH

Connections (Notifications)

You can connect various external devices to the TV.

Supported external devices are: HD receivers, DVD

players, VCRs, audio systems, USB storage devices,

PC, gaming devices, and other external devices.

For more information on an external device’s

connection, refer to the manual provided with

each device.

NOTE

• If you record a TV program on a DVD recorder or

VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR.

For more information about recording, refer to

the manual provided with the connected device.

• The external device connections shown may

differ slightly from illustrations in a manual.

• Connect external devices to the TV regardless

about the order of the TV port.

• If you connect a gaming device to the TV, use the

cable supplied with the gaming device.

• Refer to the external equipment’s manual for

operating instructions.

• In PC mode, there may be noise associated

with the resolution, vertical pattern, contrast,

or brightness. If noise is present, change the PC

output to another resolution, change the refresh

rate to another rate, or adjust the brightness and

contrast on the PICTURE menu until the picture

is clear.

• Depending upon the graphics card, some

resolution settings may not allow the image to

be positioned on the screen properly.

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch

TV. The illustrations may differ from the actual

items and an RF cable is optional.

CAUTION

• Make sure not to bend the copper wire of the RF

cable.

Copper wire

• Complete all connections between devices, and

then connect the power cord to the power outlet

to prevent damage to your TV.

NOTE

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG,

Dolby Digital.

Other connections

Connect your TV to external devices. For the best

picture and audio quality, connect the external

device and the TV with the HDMI cable. Depending

upon the model, a cable may not be provided.

ENGLISH

Remote control

The descriptions in this manual are based on

the buttons on the remote control. Please read

this manual carefully and use the TV correctly. To

install batteries, open the battery cover, replace

batteries (1.5 V AAA) matching the and ends

to the label inside the compartment, and close

the battery cover. Failure to match the correct

polarities of the battery may cause the battery

to burst or leak, resulting in fire, personal injury,

or ambient pollution. To remove the batteries,

perform the installation actions in reverse. This

remote uses infrared light. When in use, it should

be pointed in the direction of the TV’s remote

sensor.

(Power) Turns the TV on or off.

Selects TV or PC mode.

Activates or deactivates the subtitles.

Selects an AV mode.

RATIO Resizes an image.

Selects the input mode.

Number buttons Enters numbers.

(Dash) Inserts a dash between numbers such as

2-1 and 2-2.

Accesses the saved channel list.

Alternates between the two last

channels selected. (pressing repeatedly).

Adjusts the volume level.

Accesses your favorite channel list.

Digital signal: Changes the audio language.

Analog signal: Changes the MTS sound.

(MTS : Multichannel Television Sound)

Mutes all sounds.

Scrolls through the saved channels.

Moves to the previous or next screen.

Changes the image mode.

Shows information on the current

program.

Changes the sound mode.

Accesses the main menu.

Accesses the quick menu.

Navigation buttons ( )

Scrolls through menus or options.

Selects menus or options and confirms your

input.

Returns to the previous screen.

Clears all on-screen displays and returns to TV

viewing.

Not functional.

Sets the length of time until the TV to turns off.

Control buttons ( , , , , )

Controls the compatible devices (USB).

These access special functions in

some menus.

Adjusts the brightness of

the screen by controlling the screen backlight.

ENGLISH

Settings

To set up the channels automatically

SETTINGS CHANNEL Auto Tuning

Memorizes automatically the channels being

broadcast.

• The channels will not be memorized properly if

the antenna/cable is not installed correctly.

• Auto Tuning memorizes the channels that are

currently being broadcast.

• If Lock System is turned on, a pop-up window

will appear asking for password.

To select picture mode

SETTINGS PICTURE Picture Mode

Select the picture mode optimized for the viewing

environment or the program.

• Vivid: Adjusts the video image for the retail

environment by enhancing the contrast,

brightness, color, and sharpness.

• Standard: Adjusts the image for a normal

environment.

• APS: The Energy Saver feature changes settings

on the TV to reduce power consumption.

• Cinema: Optimizes the video image for a

cinematic look to enjoy movies as if you are in a

movie theater.

• Game: Optimizes the video image for fast

moving video such as PCs or games.

• Expert 1, 2: Adjusts the detailed video image

settings for video experts as well as general

viewers.

To set advanced control

SETTINGS PICTURE Picture Mode

Advanced Control or Expert Control

For each picture mode, screen can be calibrated;

or for a special screen, picture settings can be

adjusted. Select the desired Picture Mode.

• Dynamic Contrast: Adjusts the contrast to the

optimal level according to the brightness of the

image.

• Dynamic Color: Adjusts colors to make the

image appear in more natural colors.

• Skin Color: Skin color spectrum can be

separately set to implement the skin color as

defined by the user.

• Sky Color: Sky color is set separately.

• Grass Color: Natural color spectrum (meadows,

hills, etc.) can be separately set.

• Gamma: Sets the gradation curve according to

the output of picture signal in relation to the

input signal.

• Color Gamut: Selects the range of colors that

can be expressed.

• Edge Enhancer: Shows clearer and distinctive

yet natural edges of the video.

• Color Filter: Filters a specific color spectrum in

RGB colors to fine-tune color saturation and hue

accurately.

• Color Temperature: Adjusts the overall tone of

the screen as desired. In Expert mode, detailed

fine-tuning can be set via Gamma method, etc.

• Color Management System: This is a system

that experts use when they adjust color with a

test pattern. They can select from six color areas

(Red / Green / Blue / Cyan / Magenta / Yellow)

without affecting other colors. For normal

images, adjustments may not result in noticeable

color changes.

• Depending upon input signal or other picture

settings, the range of detailed items for

adjustment may differ.

To set additional picture options

SETTINGS PICTURE Picture Mode

Picture Option

[Depending upon model]

Adjusts detailed setting for images.

• Noise Reduction: Eliminates noise in the

picture.

• MPEG Noise Reduction: Eliminates noise

generated while creating digital picture signals.

• Black Level: Adjusts the brightness and contrast

of the screen to suit the black level.

• Real Cinema: Optimizes the screen for movie

viewing.

• Motion Eye Care: [Depending upon model]

Saves power consumption by adjusting the

brightness corresponding to the movement of

the image on the screen.

• Depending upon input signal or other picture

settings, the range of detailed items for

adjustment may differ.

ENGLISH

To use Energy Saving feature

SETTINGS PICTURE ꕊ Energy Saving

Saves electric power by adjusting screen

brightness.

• Off: Turns off the Energy Saving.

• Minimum/Medium/Maximum: Applies the pre-

set Energy Saving.

• Screen off: Screen is turned off and only sound

is played. Press any button except Power button

on the remote control to turn the screen back

on.

To use Eye Comfort Mode feature

SETTINGS PICTURE Eye Comfort Mode

• If you turn this option on, color temperature will

be automatically adjusted to reduce eye strain.

• On: Automatically adjusts the screen color

temperature.

• Off: Turns off the Eye Comfort Mode.

To use TV speaker

SETTINGS AUDIO TV Speaker

[Depending upon model]

Sound is output through the TV speaker.

To set password

SETTINGS LOCK Set Password

Sets or changes the TV password.

The initial password is set to 0000.

To set the caption

SETTINGS OPTION Caption

View captions when the TV station provides

captioned programming. Program captions work

only on digital/analog broadcasts or external input.

Change Caption to On and select caption settings.

• Mode

CC 1-4 (Closed Captioning) / Text 1-4 Displays

the audio portion of a TV program as text on

the TV screen. CC1 is the most common mode

in use. Field 1 data channels: two Captions (CC1,

CC2), two Text (T1, T2). Field 2 data channels: two

Captions (CC3, CC4), two Text (T3, T4).

Service 1-6 This is only available for the digital

broadcasting system.

• Digital Option

Set up the size and color of the captions on

Digital Option. Please select Set by Program

or Custom. Select Custom to adjust minute

options such as the captions’ size and color.

To return to initial settings

SETTINGS OPTION Initial Setting

Returns to initial default mode by deleting all

optional setup. Once initialization is completed,

the TV will turn off and on by itself.

• When Lock System is in place, a pop-up window

appears and asks for password

• Do not turn off the power during initialization.

To use the audio guidance

[This feature is available in certain countries only.]

SETTINGS

OPTION Audio Guidance

If Audio Guidance is set to On, audio guides will

be provided in various situations, such as when

you change channels, adjust the volume or change

settings and input signals.

• Speed: Adjust the speed of spoken guide.

• Volume: Adjust the volume of spoken guide.

• Pitch: Adjusts the tone of spoken guide.

• For visually impaired users.

ENGLISH

To remove the USB device

[Only 28LJ4540]

Q.MENU

Eject USB

Once the message that the USB device was

removed is displayed, remove the device from the

TV.

• After selecting to remove USB device, the USB

storage Device cannot be read. Remove the USB

storage device and then reconnect it.

Warning when using USB storage devices

[Only 28LJ4540]

• The TV recognizes only a USB storage device.

• If you connect a USB storage device to the TV

through a USB hub, your TV may not recognize

the USB storage device.

• The TV may not recognize a USB storage device

that requires a special driver.

• The recognition speed of a USB storage device

may differ depending upon the device.

• Only use a USB storage device which has normal

music or image files.

• Use only USB storage devices that are formatted

as a FAT 32 or NTFS file system.

• You may need to connect a USB storage device

to an external power supply with a power

adapter.

• If the TV does not recognize a connected USB

storage device, replace the cable and try again.

Do not use an excessively long cable.

• The TV does not support some USB storage

devices properly.

• You can use a multi-partition (up to 4) USB

storage device.

• The file alignment method of a USB storage

device is similar to the one of Windows XP.

• You cannot create or delete a folder saved in a

USB storage device directly on the TV.

• The number of characters for a file name is up to

100 English characters.

• If there are too many folders and files in one

folder, it may not operate properly.

• The recommended capacity for a USB external

hard disk is 2 TB or less and for a USB storage

device is 32 GB or less.

• If a USB external hard disk with the Energy

Saving feature does not work, turn the USB

external hard disk off and on again to make it

work properly. For more information, refer to the

user manual of the USB external hard disk.

• The Electrostatic discharge can cause USB

device’s malfunction. In this case, USB Device has

to be plugged again.

Supported Photo Formats

[Only 28LJ4540]

• Category 2D (jpeg, jpg)

[Available file type]

SOF0: baseline,

SOF1: Sequential

SOF2: Progressive

[Photo size]

Minimum: 64 x 64

Maximum: Normal Type: 15,360 (W) x 8,640 (H)

Progressive Type: 1,024 (W) x 768 (H)

Supported Audio Formats

[Only 28LJ4540]

• File type : mp3

[Bit rate] 32 Kbps - 320 Kbps

[Sample freq.] 32 kHz - 48 kHz

[Support] MPEG1, MPEG2, Layer2, Layer3

To see web manual

To obtain the external control device setup

information, please visit www.lg.com.

ENGLISH

Troubleshooting

• Cannot control the TV with the remote control.

- Check if anything such as tape has been placed

over the receiver.

- Check if there is any obstacle between the

product and the remote control.

- Replace the batteries with new ones.

• No image display and no sound is produced.

- Check if the product is turned on.

- Check if the power cord is connected to a wall

outlet.

- Check if there is a problem in the wall outlet by

connecting other products.

• The TV turns off suddenly.

- Check the power control settings. The power

supply may be interrupted.

- Check if the Off Time / Sleep Timer feature is

activated in the TIME settings.

- If there is no signal while the TV is on, the TV

will turn off automatically after 15 minutes of

inactivity.

La page charge ...

LG 28LJ4540 Le manuel du propriétaire

Marque: LG

Modèle: 28LJ4540

Catégorie: Téléviseurs LCD

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: LG 28LJ4540 Owner's manual

LG 28LJ4540 Le manuel du propriétaire

Ce manuel convient également à

LG 28LJ4540 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents