LG 22LB4510 Le manuel du propriétaire

OWNER’S MANUAL

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV

and retain it for future reference.

P/NO : MFL67162479 (1407-REV03)

www.lg.com

22LB4510

24LB4510

29LB4510

29LB4505

*MFL67162479*

2

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS

INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated dangerous voltage within the

product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you

may be seriously injured or there is a

possibility of accident or death.

CAUTION

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

The note helps you understand and use

the product safely. Please read the note

carefully before using the product.

Read these instructions.

Keep these instructions.

Follow all instructions.

Heed all warnings.

• Do not allow the television to become wet.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than

the other. A grounding type plug has two

blades and a third grounding prong. The

wide blade or the third prong are provided

for your safety. If the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet (Can differ

by country).

• Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil

or pen, or make a scratch on it.

WARNING: This product contains chemicals

known to the State of California to cause

cancer and birth defects or other reproductive

harm.

Wash hands after handling.

3

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

• Only use attachments/accessories specified

by the manufacturer.

• Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

• Do not stick metal objects or any other

conductive material into the power cord. Do

not touch the end of the power cord while it

is plugged in.

• Keep the packing anti-moisture material

or vinyl packing out of the reach of

children. Anti-moisture material is harmful

if swallowed. If swallowed by mistake,

induce vomiting and go to the nearest

hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach of

children.

• CAUTION concerning the Power Cord

(Can differ by country)

It is recommended that appliances be

placed upon a dedicated circuit; that is, a

single outlet circuit which powers only that

appliance and has no additional outlets or

branch circuits. Check the specification page

of this owner’s manual to be certain. Do not

connect too many appliances to the same

AC power outlet as this could result in fire or

electric shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power

cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could

result in electric shock or fire. Periodically

examine the cord of your appliance, and

if its appearance indicates damage or

deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced

with an exact replacement part by an

authorized service. Protect the power cord

from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where

the cord exits the appliance. Do not move

the TV with the power cord plugged in. Do

not use a damaged or loose power cord. Be

sure do grasp the plug when unplugging the

power cord. Do not pull on the power cord to

unplug the TV.

• Warning - To reduce the risk of fire or

electrical shock, do not expose this product

to rain, moisture or other liquids. Do not

touch the TV with wet hands. Do not install

this product near flammable objects such

as gasoline or candles, or expose the TV to

direct air conditioning.

• Do not expose to dripping or splashing and

do not place objects filled with liquids, such

as vases, cups, etc. on or over the apparatus

(e.g. on shelves above the unit).

4

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC

plug must be connected to a three-prong

grounded AC outlet). If grounding methods

are not possible, have a qualified electrician

install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone

wires, lightening rods, or gas pipes.

Short-circuit

Breaker

Power

Supply

• As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC

power source even if the unit is turned off.

• Do not attempt to modify this product in

any way without written authorization from

LG Electronics. Unauthorized modification

could void the user’s authority to operate this

product.

• Outdoor Antenna Grounding

(Can differ by country)

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity

of overhead power lines or other electric light

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

U.S.A. provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code

• Cleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

may occur. Do not clean with chemicals such

as alcohol, thinners, or benzine.

• Moving

Make sure the product is turned off,

unplugged, and all cables have been

removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress

on the front panel of the TV.

• Ventilation

Install your TV where there is proper

ventilation. Do not install in a confined space

such as a bookcase. Do not cover the product

with cloth or other materials while plugged.

Do not install in excessively dusty places.

• If you smell smoke or other odors coming

from the TV, unplug the power cord and

contact an authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during

a lightning storm.

• When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.

• Do not allow an impact shock, any objects to

fall into the product, and do not drop anything

onto the screen.

• DISCONNECTING DEVICE FROM THE MAIN

POWER

Mains plug is the disconnecting device. The

plug must remain readily operable.

• Store the accessories (battery, etc.) in a safe

location out of the reach of children.

• This apparatus uses batteries. In your

community there might be regulations that

require you to dispose of these batteries

properly due to environmental considerations.

Please contact your local authorities for

disposal or recycling information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow

the batteries to overheat.

5

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Dot Defect

The panel is a high technology product with

resolution of two million to six million pixels.

In a very few cases, you could see fine dots

on the screen while you’re viewing the TV.

Those dots are deactivated pixels and do not

affect the performance and reliability of the

TV.

• Generated Sound

Cracking noise A cracking noise that occurs

when watching or turning off the TV is

generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required. Electrical circuit

humming/panel buzzing: A low level noise

is generated from a high-speed switching

circuit, which supplies a large amount

of current to operate a product. It varies

depending upon the product. This generated

sound does not affect the performance and

reliability of the product.

• Take care not to touch the ventilation

openings. When watching the TV for a long

period, the ventilation openings may become

hot. This does not affect the performance of

the product or cause defects in the product.

• Do not install this product on a wall if it

could be exposed to oil or oil mist. This may

damage the product and cause it to fall.

• If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This

is normal; there is nothing wrong with TV.

Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the TV’s performance. Avoid

touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary

distortion effects on the screen.

Preventing image burn or burn-in on your

TV screen

• If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and

become a permanent disfigurement on the

screen. This is image burn or burn-in and not

covered by the warranty.

• If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on

the letterboxed area of the screen.

• Avoid displaying a fixed image on the TV

screen for a long period of time (2 or more

hours for LCD, 1 or more hours for the

Plasma TV) to prevent image burn.

6

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must accept any

interference received, including interference that may cause undesired operation of the device. Any

changes or modifications in construction of this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of

the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the grounding system of the

building, as close to the point of the cable entry as practical.

For USA

LG Recycling Policy

LG Electronics offers a customized e-waste take-back and recycling service that meets local

needs and requirements in the countries where e-waste regulations are in place, and also provides

product and packaging take-back and recycling service voluntarily in some countries. LG Electronics

evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the

goal of improving recyclability where practicable. Through these activities, LG seeks to contribute

to conserving natural resources and protecting the environment. For more information about the

LG Recycling Policy, please visit our global site at

http://www.lg.com/global/sustainability/environment/take-back-recycling

7

ENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com

.

Manufactured under license from Dolby Laboratories. Dolby and the double-D

symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in

this product, please visit

http://opensource.lge.com

.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of

performing such distribution (such as the cost of media, shipping and handling) upon email request to

[email protected]. This offer is valid for three (3) years from the date on which you purchased the

product.

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you

are using.

y

New features may be added to this TV in the future.

y

The TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy

consumption.

y

The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

NOTE

8

ENGLISH

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

Remote Control,

Batteries (AAA)

Owner's Manual Stand Base

(For 22/24LB4510)

Stand Base

(For 29LB4510/4505)

Power Cord AC/DC Adapter AC/DC Adapter

(Depending upon model)

• Do not use any unapproved items to ensure the safety and product’s lifespan.

• Any damages or injuries by using unapproved items are not covered by the warranty.

• Some models appear to have a thin film on the screen. It is actually part of the screen; do not

remove it.

CAUTION

• The items supplied with your product may vary depending upon the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm (0.39 inches) thick and 18 mm

(0.7 inches) width.

• Use an extension cable that supports USB 2.0 if the USB cable or

USB flash drive does not fit into your TV’s USB port.

NOTE

B

A

B

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

(Depending upon model)

or

9

ENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Using the joystick button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

When the TV is turned off, place your finger on the joystick button, press it once

and release it.

Power Off

When the TV is turned on, place your finger on the joystick button, press it once

for a few seconds and release it.

(However, if the Menu button is on the screen, pressing and holing the joystick

button will let you exit the Menu.)

Volume Control

If you place your finger over the joystick button, move it left or right, you can

adjust the volume level you want.

Channels Control

If you place your finger over the joystick button, move it up or down, you can

scroll through the saved channels you want.

• With your finger over the joystick button, move it up, down, left, or right, be careful not to press the

joystick button. If you press the joystick button first, you can not adjust the volume level and/or scroll

through saved channels.

NOTE

Adjusting the menu

When the TV is turned on, press the joystick button one time.

You can adjust the menu items ( , , , ) moving the joystick button up, down, left, or right.

TV off

Turns the power off.

Settings

Accesses the main menu.

Close

Clears on-screen displays and returns to TV viewing.

Input List

Changes the input source.

Screen

Speakers

Remote Control Sensor

Power Indicator

- Red When the power is turned off

-

Off When the power is turned on

- Amber When the power is in power saving mode

Joystick Button

• Joystick button is located

below the screen of TV.

NOTE

(For 22/24LB4510)

10

ENGLISH

ASSEMBLING AND PREPARING

INPUT

SETTINGS

OK

Touch Button Description

/

Scrolls through the saved channels.

/

Adjusts the volume level.

OK Selects the highlighted menu option or confirms an input.

SETTINGS Accesses the main menus, or saves your input and exits the menus.

INPUT Changes the input source.

Turns the power on or off.

Touch Buttons

Speakers

Screen

y

All of the buttons are touch sensitive and can be operated through simply touching with your

finger.

NOTE

(For 29LB4510/4505)

11

ENGLISH

ASSEMBLING AND PREPARING

1

2

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

Stand Base

CAUTION

y

When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect

the screen from scratches.

Detaching the stand

2

1

Stand Base

NOTE

y

Lift up the latch at the bottom of the

stand base and detach the stand base

from the TV.

12

ENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the

following to prevent the TV from being

scratched or damaged and for safe

transportation regardless of its type and size.

• Avoid touching the screen at all times, as

this may result in damage to the screen.

• Do not place the product on the floor with its

front facing down without padding. Failure to

do so may result in damage to the screen.

CAUTION

• It is recommended to move the TV in the

box or packing material that the TV originally

came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the

screen should face away from

you to avoid damage.

• Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

• When transporting the TV, do not expose the

TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright; never turn the TV on its side or tilt

towards the left or right.

• When handling the TV, be careful not to

damage the protruding joystick button.

(Depending upon model)

CAUTION

y

Do not carry the TV upside-down by

holding the stand body (or stand base) as

this may cause it to fall off, resulting in

damage or injury.

y

The illustration shows a general example

of installation and may look different

from the actual product.

CAUTION

13

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

1

Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (4 inches) (minimum) space

from the wall for proper ventilation.

10 cm

(4 inches)

2 Connect the AC/DC Adapter and Power

Cord to a wall outlet.

• Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

• Please be sure to connect the TV to the

AC/DC power adapter before connecting

the TV’s power plug to a wall power

outlet.

CAUTION

or

DC-IN

(19V )

DC-IN

(19V )

2

3

1

2

AC-DC Adapter

14

ENGLISH

ASSEMBLING AND PREPARING

Using the Kensington security system(optional)

(Depending upon model)

The Kensington security system connector

is located at the back of the TV. For more

information of installation and using, refer to the

manual supplied with the Kensington security

system or visit

http://www.kensington.com.

Connect the Kensington security system cable

between the TV and a table.

y

The Kensington security system is optional.

You can obtain additional accessories from

most electronics stores.

NOTE

15

ENGLISH

ASSEMBLING AND PREPARING

• Disconnect the power before moving or

installing the TV. Otherwise electric shock

may occur.

• If you install the TV on a ceiling or slanted

wall, it may fall and result in severe

injury. Use an authorized LG wall mount

and contact the local dealer or qualified

personnel. When using a third-party wall

mount, it is not covered by the warranty.

• Do not over tighten the screws as this may

cause damage to the TV and void your

warranty.

• Use the screws and wall mounts that meet

the VESA standard. Any damages or injuries

by misuse or using an improper accessory

are not covered by the warranty.

• Screw length from outer surface of back

cover should be under 8 mm (0.3 inches).

Max. 8 mm

(0.3 inches)

Wall Mount Pad

Back Cover

Standard screw

: M4 x L10

CAUTION

Mounting on a wall

An optional wall mount can be used with your

LG Television. Consult with your local dealer for

a wall mount that supports the VESA standard

used by your TV model. Carefully attach the

wall mount bracket at the rear of the TV.

Install the wall mount bracket on a solid wall

perpendicular to the floor. If you are attaching

the TV to other building materials, please

contact qualified personnel to install the wall

mount. Detailed instructions will be included

with the wall mount. We recommend that you

use an LG brand wall mount. When you do not

use LG’s wall mount bracket, please use a wall

mount bracket where the device is adequately

secured to the wall with enough space to allow

connectivity to external devices.

10 cm

(4 inches)

Make sure to use screws and wall mounts that

meet the VESA standard. Standard dimensions

for the wall mount kits are described in the

following table.

Model

22LB4510

24LB4510

29LB4510

29LB4505

VESA (A x B)

A

B

75 x 75 100 x 100

Standard screw M4 x L10

Number of screws 4

Wall mount bracket

(optional)

RW120

y

Use the screws that are listed on the

VESA standard screw specifications.

y

The wall mount kit includes an

installation manual and necessary parts.

y

The wall mount bracket is optional. You

can obtain additional accessories from

your local dealer.

y

The length of screws may differ

depending upon the wall mount. Be

sure to use the proper length.

y

For more information, refer to the

instructions supplied with the wall

mount.

NOTE

16

ENGLISH

MAKING CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD

players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

For more information on external device’s connection, refer to the manual provided with each device.

• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the

manual provided with the connected device.

• The external device connections shown may differ slightly from illustrations in this manual.

• Connect external devices to the TV regardless about the order of the TV port.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• Refer to the external equipment’s manual for operating instructions.

NOTE

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items

and an RF cable is optional.

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG, Dolby

Digital

NOTE

• Make sure not to bend the copper wire of

the RF cable.

Copper wire

• Complete all connections between devices,

and then connect the power cord to the

power outlet to prevent damage to your TV.

CAUTION

ANTENNA

/CABLE IN

(*Not provided)

Terminal

VHF Antenna

UHF Antenna

Antenna

R/F Cable (75

Ω

)

17

ENGLISH

MAKING CONNECTIONS

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device

and the TV with the HDMI cable as shown. Depending upon the model, a cable may be provided.

1

The USB port provides 0.5A electric current. If you need more electric current in the case of an HDD,

use a separate power adaptor.

DVD / Blu-Ray / HD Cable Box / VCR

DVD / Blu-Ray / HD Cable Box

PC

VIDEO

AUDIO

(MONO)

AV IN

R

L

COMPONENT IN

R

L

P

R

P

B

Y

HDMI IN

RGB IN (PC)

D

C

-I

N

(19 V )

USB IN

5 V 0.5 A

S

ERVI

C

E

O

NIY

VIDEO

AUDIO

(MONO)

AV IN

R

L

COMPONENT IN

R

L

P

R

P

B

Y

USB / HDD

1

Blu-Ray / HD Cable Box

/ HD STB / DVD / PC

18

ENGLISH

MAKING CONNECTIONS

Connecting to a PC

y

It is recommended to use the TV with an HDMI connection for the best image quality.

y

If you do not use an optional external speaker, connect the PC to the TV with the optional audio

cable.

y

If you turn the TV on when the set is cold, the screen may flicker. This is normal.

y

Some red, green, or blue spots may appear on the screen. This is normal.

y

Connect the signal input cable and tighten it by turning the screws clockwise.

y

Do not press the screen with your finger for a long time as this may result in temporary distortion

on the screen.

y

Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use

a screensaver if possible.

y

When using the HDMI/DVI cable, only single link is supported.

NOTE

y

If you select

Yes

the size and image quality are optimised for your PC.

y

If you select

No

the size and image quality are optimised for the AV device (DVD player, set-top

box, gaming device).

y

If you select

Do not show message again

this message does not appear until the TV is reset.

You can change the set value in

SETTINGS



OPTION



Input Label

.

Is the input connected to your PC?

Do not show message again.

y

If you want to use HDMI-PC mode, you must set the input label to PC mode.

y

The OSD (On Screen Display) is displayed on the screen as shown below.

»

When turning the product on in

HDMI

input.

»

When switching to

HDMI

input.

NOTE

No

Yes

19

ENGLISH

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control.

Please read this manual carefully and use the TV correctly. To install batteries, open

the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label

inside the compartment, and close the battery cover. Failure to match the correct polarities

of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient

pollution. To remove the batteries, perform the installation actions in reverse.

• Do not mix old and new batteries, as this may damage the remote control.

CAUTION

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote

sensor.

FLASHBK

AUDIO

793&

(POWER) Turns the TV on or off.

TV/PC Selects TV or PC mode.

CAPTION Activates or deactivates the subtitles.

AV MODE Selects an AV mode.

RATIO Resizes an image.

INPUT Changes the input source. Turns the TV on if it is off.

Number button Enters numbers.

(Dash) Inserts a dash between numbers such as 2-1 and 2-2

LIST Accesses the saved channel list.

FLASHBK Alternates between the two last channels selected (pressing

repeatedly).

VOL Adjusts the volume level.

FAV Accesses your favorite channel list.

AUDIO

Digital signal: Changes the audio language.

Analog signal: Changes the MTS sound.

MUTE

Mutes all sounds.

CH Scrolls through the saved channels.

PAGE Moves to the previous or next screen.

PICTURE Changes the image mode.

INFO

Shows information on the current program.

SOUND Changes the sound mode.

SETTINGS Accesses the main menu.

Q.MENU Accesses the quick menu.

Navigation buttons (

ꔠ

,

ꔡ

,

ꔗ

,

ꔃ

) Scrolls through menus or options.

OK

Selects menus or options and confirms your input.

BACK Returns to the previous screen.

EXIT Clears all on-screen displays and returns to TV viewing.

Not functional.

SLEEP Sets the length of time until the TV to turns off.

Control buttons (

, , , , ) Controls the compatible devices (USB).

These access special functions in some menus.

(Backlight) Adjusts the brightness of the screen by controlling the screen

backlight.

20

ENGLISH

SETTINGS

To set up the channels automatically

SETTINGS



CHANNEL

➙

Auto Tuning

Memorizes automatically the channels being

broadcast.

y

The channels will not be memorized

properly if the antenna/cable is not

installed correctly.

y

Auto Tuning memorizes the channels that

are currently being broadcast.

y

If Lock System is turned on, a pop-up

window will appear asking for password.

To use Energy Saving feature

SETTINGS



PICTURE

➙

ꕊ

Energy Saving

Saves electric power by adjusting screen

brightness.

y

Off Turns off the Energy Saving.

y

Minimum/Medium/Maximum Applies the

pre-set Energy Saving.

y

Screen off Screen is turned off and only

sound is played. Press any button except

Power button on the remote control to turn

the screen back on.

To select picture mode

SETTINGS



PICTURE

➙

Picture Mode

Select the picture mode optimized for the

viewing environment or the program.

y

Vivid Adjusts the video image for the retail

environment by enhancing the contrast,

brightness, color, and sharpness.

y

Standard Adjusts the image for a normal

environment.

y

APS The Energy Saver feature changes

settings on the TV to reduce power

consumption.

y

Cinema Optimizes the video image for a

cinematic look to enjoy movies as if you

are in a movie theater.

y

Game Optimizes the video image for fast

moving video such as PCs or games.

y

Photo Displays the optimum picture for

photo (still image).

y

Expert 1, 2 Adjusts the detailed video

image settings for video experts as well as

general viewers.

y

Pressing any button of the remote control

will turn on the screen again.

To set advanced control

SETTINGS



PICTURE

➙

Picture Mode

➙

Advanced Control/Expert Control

For each picture mode, screen can be

calibrated; or for a special screen, picture

settings can be adjusted.

Select the desired Picture Mode.

y

Dynamic Contrast Adjusts the contrast to

the optimal level according to the image’s

brightness.

y

Dynamic Color Adjusts colors to make the

image appear in more natural colors.

y

Skin Color Skin color spectrum can be

separately set to implement the skin color

as defined by the user.

y

Grass Color Natural color spectrum

(meadows, hills, etc.) can be separately set.

y

Sky Color Sky color is set separately.

y

Gamma Sets the gradation curve according

to the output of picture signal in relation to

the input signal.

y

Color Gamut Selects the range of colors

that can be expressed.

y

Edge Enhancer Shows clearer and

distinctive yet natural edges of the video.

y

Color Filter Filters a specific color

spectrum in RGB colors to fine-tune color

saturation and hue accurately.

y

Color Temperature Adjusts the overall tone

of the screen as desired. In Expert mode,

detailed fine-tuning can be set via Gamma

method, etc.

y

Color Management System This system

is used by experts to adjust color with a

test pattern. They can select from six color

areas (Red/ Green/Blue/ Cyan/Magenta/

Yellow) without affecting other colors. For

normal images, adjustments may not result

in noticeable color changes.

y

Depending upon input signal or other

picture settings, the range of detailed

items for adjustment may differ.

La page charge ...

LG 22LB4510 Le manuel du propriétaire

LG 22LB4510 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents